TBS Standards Catalogue

Tanzania Bureau of Standards (TBS) catalogue contains bibliographic information of over 1500 Tanzania standards (TZS), voluntary and compulsory.

They cover a number of areas such as electrical engineering, mechanical engineering, civil engineering, environment, agriculture and food, packaging, labeling, textile, building and construction, manufacturing, information and communication technologies, energy, quality management, conformity assessment and services, to name a few.

The records contain information on the title, TZS number, number of pages and scope. The standards are classified to the International Classification for Standards (ICS).

TZS No. Year Title / Scope Pages Price (Tshs) File
Page 120 of 120 pages ‹ First  < 118 119 120
TZS 1418: 2011 (1st Ed) 2011
Agricultural equipment – Soil tillage and equipment – Terminology
Includes the definitions used in the general classification, design, construction, operation and performance of tillage equipment and soil-tool relationships.
ICS: 65.060.20
17 Pg/s17
TZS 841 (Part 7): 2005 (1st Ed) 2005
Materials and articles in contact with foodstuffs – Cutlery and table hollowware – Part 7 – Requirement for table cutlery made of silver, other precious metals and their alloys
Specifies material and performance requirements for table cutlery made of silver, other precious metals and their alloys (knives with stainless steel blades, forks, spoons, carving sets, ladles and other pieces).
ICS: 67.250 | ISO: 8442-7:2000
11 Pg/s11,000/=
TZS 750: 2015 2015
Tolerance limits for noxious gases/fumes
Sets tolerance limits for noxious gaseous and fumes emitted from industrial, commercial, municipal operations and informal sector activities. It also specifies methods for direct measurement of concentration of noxious gases and fumes from emitting source.
ICS: 13.040.30
6 Pg/s6,000/=
TZS 80: 2017 - ISO 186:2002 (2nd ed) 2017
Paper – Sampling methods for testing
Specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046), for testing to determine whether or not its average quality complies with set specifications. It defines the conditions which apply when sampling is carried out to resolve disputes between buyer and seller relating to a defined lot of paper or board, which has been or is being delivered.
ICS: 85.060 | ISO: 186:2002
9 Pg/sTshs. 15,000/= / USD 15
TZS 1731: 2015 (1st ed) 2015
Leather — Ladies handbags specification
Covers general requirements for materials, design, construction and other information applicable to all ladies fashion handbags made with leather or coated fabrics outer
ICS: 59.140.35
10 Pg/sTshs 15,000/=, USD 15
TZS 1407: 2016 (1st Ed) 2016
Water quality — Determination of surfactants — Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS)
Specifies a spectrometric method for the determination of anionic surfactants by measurement of the methylene blue index (MBAS) in aqueous media. The method is applicable to drinking water, surface water as well as waste water, for example for the
determination of the primary degradation of surfactants under investigation in test systems containing natural or synthetic waste water. It applies for both laboratory scale and technical waste-water treatment plants.
ICS: 13.060.50 | ISO: 7875-1: 1996
9 Pg/sTshs 15,000/=, USD 15
TZS 1192: 2010 (1st Ed) 2010
Roselle Alcoholic drink - Specification
Specifies requirements and methods of sampling and tests for roselle alcoholic drink, produced by fermentation of a sugar added extract of dried rosellecalyces mash, by yeasts
ICS: 67.160.10
5 Pg/s5,000/=
TZS 418: 2010 (2nd Ed) 2010
Instant coffee – Determination of loss in mass at 70oC under reduced pressure
Specifies a method for the determination of the loss in mass at 70oC under reduced pressure of instant coffee. It is applicable to all types of instant coffee. It does not apply to liquid coffee extracts
ICS: 67.140.20 | ISO: 3726:1983
9 Pg/s15,000/=/ USD 15
TZS 1897: 2016- ISO 2409: 2013 (1st ed) 2016
Paints and varnishes — Cross-cut test
Specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property determined by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure
is not to be regarded, however, as a means of measuring adhesion.
ICS: 87.040 | ISO: 2409: 2013
14 Pg/sTshs 20,000/=, USD 20
TZS 310: 1988 (1st Ed) 1988
Textiles – Method for determination of trash content of cotton and trash and lint content of waste by means of mechanical pneumatic machines
Specifies the method for determining both the trash content of raw cotton taken from bales, laps, silvers, flat strips, cylinder strips, camber waste, the lint and trash content of wastes such as opener droppings and card taken in droppings by means of Shirley Analyzer.
ICS: 59.080
6 Pg/s15,000/=/ USD 15
TZS 1187 (Part 11): 2010 2010
Road vehicles- Compressed Natural Gas (CNG) fuel system components part 11: Gas/ air mixer
Specifies test and requirements for the gas/ air mixer, a compressed natural gas fuel system component intended for use on all types of motor vehicles.
ICS: 43.060.40 | ISO: 15500-11: 2001
3 Pg/s3,000/=
TZS 155: 1983 (1st Ed) 1983
Sugar confectionery – Methods of sampling and analysis
Covers methods of sampling and analysis for sugar confectionery
ICS: 67180.10.
13 Pg/sTshs. 20,000/= / USD 20
TZS 1064 (Part 2):2008 (1st Ed) 2008
Tyres, valves and tubes – List of equivalent - Part 2: Tyre values
Presents a list of equivalent tyre valve terms commonly use in the tyre industry
ICS: 01.040.83 | ISO: 3877-2: 1997
19 Pg/s19,000/=
Page 120 of 120 pages ‹ First  < 118 119 120