Tanzania Bureau of Standards (TBS) catalogue contains bibliographic information of over 1500 Tanzania standards (TZS), voluntary and compulsory.
They cover a number of areas such as electrical engineering, mechanical engineering, civil engineering, environment, agriculture and food, packaging, labeling, textile, building and construction, manufacturing, information and communication technologies, energy, quality management, conformity assessment and services, to name a few.
The records contain information on the title, TZS number, number of pages and scope. The standards are classified to the International Classification for Standards (ICS).
||Title / Scope
| TZS 1568 (Part 2): 2012 ||
|Method for determination of iron in flours – Quantitative Spectrophotometric method for determination of Total Iron and Iron from Ferrous Sulphate in Flours and Premixes
Prescribes a reference method for quantitative spectrophotometric method for determination of total iron and iron from ferrous sulphate contents in flours and premixes.
|9 Pg/s||15,000/= USD 15|
| TZS 1187 (Part 13): 2010 (1st Ed) ||2010
|Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 13: Pressure relief device (PRD)
Specifies test and requirements for the pressure relief device (PRD), a compressed natural gas fuel system component intended for use on the types of motor vehicles.
ICS: 43.060.40 | ISO: 15500-13: 2000
| TZS 1655: 2014 ||2014
|Edible Casein — Specification
Applies to edible acid casein, edible rennet casein and edible caseinate, intended for direct consumption or further processing.
|6 Pg/s||Tshs 15,000/= Usd 15|
| TZS 1093-14: 2017 (2nd Ed) ||2017
|Ceramic tiles – Part 14: Determination of resistance to stains
Specifies a method for determining the resistance to stains of the proper surface of ceramic tiles
ICS: 91.100.20 | ISO: 10545-14: 2015
|6 Pg/s||TSHS 15,000/= USD 15|
| TZS 2208: 2018 ||2018
|Doors -- Terminology
Gives the terminology for hinged or pivoted doors of all materials used in building construction.
ICS: 91.060.50 | ISO: 1804:1972
|8 Pg/s||Tshs 15,000/= Usd 15|
| TZS 1452-5: 2012 (1st Ed) ||2012
|Materials and articles in contact with foodstuffs – Plastics – Part 5: Test methods for overall migration into aqueous food simulants by cell
Specifies test methods for the determination of the overall migration into aqueous based food simulants from one surface only of plastics, which are intended to come into contact with foodstuffs, by exposing the food contact surface, using a cell, to the selected food simulant at temperatures up to and including 70°C for selected test times.
|9 Pg/s||TSHS. 15,000/= / USD 15|
| TZS 837 (Part 8): 2011(2nd Ed) ||2011
|Sampling and test method – Determination of particulate lead content of aerosols collected on filters – atomic absorption spectrometric method
Specifies a method based on acid digestion and atomic absorption spectrometry for the chemical analysis of lead samples collected on filters from ambient air.
ICS: 13.040.10 | ISO: 9855:1993
|7 Pg/s||Tshs.15,000/=/ USD 15|
| TZS 383: 2018 (2nd Ed) ||2018
|Determination of copper content in sodium hydroxide
Describes a method for the determination of copper content in sodium hydroxide for industrial use
|4 Pg/s||10,000/=/ USD 10|
| TZS 58 (Part 3):1980 (1st Ed) ||1980
|Aggregate – Part 3: Sampling and test methods
Specifies test methods for aggregates and methods of sampling for those tests.
|18 Pg/s||Tshs 25,000/=, USD 25|
| TZS 217: 2017 (2nd Ed) ||2017
|Gaseous oxygen (technical grade) – Specification
Prescribes requirements and method of sampling and test for gaseous oxygen (technical grade) intended for industrial use.
|11 Pg/s||Tshs 20,000/=/ USD 20|
| TZS 1639:2013 ||2013
|Rubber hoses and hose assemblies- Rubber- covered spiral- wire- reinforced hydraulic types for oil- based or water-based fluids- Specification
Specifies requirements for five types of spiral- wire- reinforced hydraulic hose and hose assembly of nominal size from 6, 3 to 51.
ICS: 83140.40 | ISO: 3862:2009
|13 Pg/s||Tshs 20,000/= Usd 20|
| TZS 1968-1: 2017 - ISO 10993-1: 2009 (1st ed) ||2017
|Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process
⎯ the general principles governing the biological evaluation of medical devices within a risk management
⎯ the general categorization of devices based on the nature and duration of their contact with the body;
⎯ the evaluation of existing relevant data from all sources;
⎯ the identification of gaps in the available data set on the basis of a risk analysis;
⎯ the identification of additional data sets necessary to analyse the biological safety of the medical device;
⎯ the assessment of the biological safety of the medical device.
ICS: 11.040.20 | ISO: 10993-1: 2009
|21 Pg/s||Tshs 30,000/= / USD 30|
| TZS 785:2008 (1st Ed) ||2008
|Calcium hypochlorite for Disinfection of water intended for human consumption – Specification
Prescribes the quality requirements and methods sampling and test for calcium chlorite for disinfection of water intended for human consumption
|11 Pg/s||Tshs.20,000/=/ USD 20|
| TZS 1829: 2016 - ISO 16212: 2008 (1st ed) ||2016
|Cosmetics — Microbiology — Enumeration of yeast and mould
Gives general guidelines for enumeration of yeast and mould present in cosmetics by counting the colonies on selective agar medium after aerobic incubation. In order to ensure product quality and safety for consumers, it is advisable to perform an appropriate microbiological risk analysis so as to determine the types of cosmetic products to which this International Standard is applicable. Products considered to present a low microbiological risk include those with low water activity, hydro-alcoholic products, products with extreme pH values, etc.
ICS: 07.100.99 | ISO: 16212: 2008
|19 Pg/s||Tshs 25,000/=, USD 25|
| TZS 1583: 2013 ||2013
|Processed cultivated edible mushrooms – Specification
Prescribes requirements and methods of sampling and tests for processed mushrooms of cultivated edible species to be supplied for export and local markets.
|11 Pg/s||Tshs 20,000/= Usd 20|