Standard Catalogues
TZS. NO | Year | Title and Scope | Pages | Price |
---|---|---|---|---|
TZS 2263: 2018 - ISO 11520-2: 2001 | 2018 | Agriculture grain dryer — Determination of performance — General additional procedure and crop-specific requirements Specifies additional procedures and gives guidance for testing and evaluating the drying performance of continuous-flow and batch grain driers for specific grain crops including wheat, barle 65.040.20 |
102 | TSHS 110,000/= USD 110 |
TZS 2253: 2018 - ISO 11520-1: 1997 | 2018 | Agriculture grain dryer — Determination of performance — General requirements Describes methods for evaluating the drying performance of continuous flow and batch grain driers. The methods specified are for determining the evaporation rate which the machines concerned ICS: 65.040.20 |
33 | TSHS 40,000/= USD 40 |
TZS 2223: 2018 – ISO/IEC 19792: 2009 | 2018 | Information technology — Security techniques — Security evaluation of biometrics Specifies the subjects to be addressed during a security evaluation of a biometric system. It covers the biometric-specific aspects and principles to be considered during the security evalu ICS: 35.040 |
37 | TSHS 45,000/= USD 45 |
TZS 2221-10-1: 2018 - IEC 60839-10-1: 1995 | 2018 | Alarm systems — Part 10: Alarm systems for road vehicles — Section 1: Passenger cars Specifies requirements and test methods for vehicle security alarm systems in tended for installation within vehicles used for the carriage of passengers and having not more than eight seats ICS: 43.040.20 |
28 | TSHS 35,000/= USD 35 |
TZS 2190-8: 2018- ISO 6182-8: 2006 | 2018 | Fire protection — Automatic sprinkler systems — Part 8: Requirements and test methods for pre-action dry alarm valves Specifies performance requirements, methods of test and marking requirements for pre-action dry alarm valves and manufacturers' specified relevant trim used in non-interlock pre-action autom ICS: 13.220.20 |
22 | TSHS 30,000/= USD 30 |
TZS 2190-5: 2018- ISO 6182-5: 2012 | 2018 | Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves Specifies performance requirements, methods of test and marking requirements for deluge valves and manufacturer's specified relevant trim used in deluge and pre-action automatic fire protect ICS: 13.220.20 |
19 | TSHS 25,000/= USD 25 |
TZS 2190-1: 2018- ISO 6182-1: 2014 | 2018 | Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinkler Specifies performance and marking requirements and test methods for conventional, spray, flat spray, and sidewall sprinklers. It is not applicable to sprinklers having multiple orifices. ICS: 67.140.10 |
68 | TSHS 75,000/= USD 75 |
TZS 1476: 2017 | 2017 | Hot-dip aluminium-zinc coated plain, corrugated and troughed steel sheets — Specification Specifies the requirements for continuous hot-dip aluminium-zinc (AZ) coated plain, corrugated and troughed steel sheets for roofing, cladding, fabrication and general use. ICS 77.140.50 |
10 | TSHS 15,000/= USD 15 |
TZS 448-2-6: 2018 - IEC 60335-2-6: 2014 | 2018 | Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances c ICS: 13.120, |
49 | TSHS 55,000/= USD 55 |
TZS 1985: 2017 | 2017 | Mixed masala — Specification Specifies the requirements and the methods of sampling and test for mixed masala which is used as a flavouring material for fish, chicken and meat. This standard is not applicable to curry p ICS: 67.220.10 |
6 | TSHS 15,000/= USD 15 |
TZS 29: 2016 | 2016 | Spices and condiments — Nomenclature Prescribes the list of botanical names of plants classified under spices and condiments. This Tanzania Standard also gives the parts of the plant used as spices, the common name of spices ICS: 67.220.10 |
3 | TSHS 10,000/= USD 10 |
TZS 1855: 2016- ISO 22743: 2006 | 2016 | Water quality — Determination of sulfates — Method by continuous flow analysis (CFA) Specifies a continuous flow analysis (CFA) method for the determination of sulfate in various types of water (such as ground water, drinking water and waste water). The method is applicable ICS: 13.060.01 |
10 | TSHS 15,000/= USD 15 |
TZS 2217-12-10: 2018 - IEC 62908-12-10: 2017 | 2018 | Touch and interactive displays — Part 12-10: Measurement methods of touch displays — Touch and electrical performance Specifies the standard measuring conditions and methods for determining touch performance of a touch sensor module. This document is applicable to touch sensor modules, where the structural ICS: 31.120 |
34 | TSHS 40,000/= USD 40 |
TZS 2217-13-10: 2018 - IEC 62908-13-10: 2016 | 2018 | Touch and interactive displays — Part 13-10: Reliability test methods of touch displays — Environmental durability test methods Specifies the methods for testing the environmental durability of touch display modules, touch sensor modules and test pattern cells, and can be used for devices at the production level, the ICS: 31.120 |
16 | TSHS 25,000/= USD 25 |
TZS 2218-1-1: 2018 - IEC 61747-1-1: 2014 | 2018 | Liquid crystal display devices — Part 1-1: Generic — Generic specification Generic specification for liquid crystal display devices. It defines general procedures for testing and gives general rules for the measuring methods of the electrical and optical characteri ICS: 31.120 |
28 | TSHS 35,000/= USD 35 |
TZS 2219-4: 2018 - IEC 60268-4: 2014 | 2018 | Sound system equipment — Part 4: Microphones Specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details ICS: 33.160.50 |
54 | TSHS 60,000/= USD 60 |
TZS 2219-5: 2018 - IEC 60268-5: 2003 | 2018 | Sound system equipment — Part 5: Loudspeakers Applies to sound system loudspeakers, treated entirely as passive elements.Loudspeakers with built-in amplifiers are excluded.NOTE 1 The term “loudspeaker” used in this s ICS: 33.160.50 |
7 | TSHS 15,000/= USD 15 |
TZS 2220-1: 2018 - IEC 62209-1: 2016 | 2018 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices — Part 1: Devic Specifies protocols and test procedures for measurement of the peak spatial-average SAR induced inside a simplified model of the head with defined reproducibility. It applies to certain elec ICS: 33.060.20 |
236 | TSHS 245,000/= USD 245 |
TZS 2259-1: 2018 - ISO 15223-1: 2016 | 2018 | Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements Identifies requirements for symbols used in medical device labelling that convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirem ICS: 11.040.01 |
25 | TSHS 30,000/= USD 30 |
TZS 2255: 2018 - ISO 3183: 2012 | 2018 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems Specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleu ICS: 75.200 |
179 | TSHS 185,000/= USD 185 |
TZS 2224-1: 2018 – ISO/IEC 19795-1: 2006 | 2018 | Information technology — Biometric performance testing and reporting — Part 1: Principles and framework Concerned with the evaluation of biometric systems in terms of error rates and throughput rates. Metrics for the various error rates in biometric enrolment, verification and identification a ICS: 35.040 |
56 | TSHS 65,000/= USD 65 |
TZS 2190-6: 2018 - ISO 6182-6: 2006 | 2018 | Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves Specifies performance requirements, methods of test and marking requirements for check valves used in automatic fire protection systems. ICS: 13.220.20 |
13 | TSHS 20,000/= USD 20 |
TZS 1120: 2018 – ISO 14050: 2009 | 2018 | Environmental management — Vocabulary Defines terms of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards. ICS: 13.020.10 |
169 | TSHS 175,000/= USD 175 |
TZS 1966: 2017 | 2017 | Stingless bee honey — Specification Specifies requirements, methods of sampling and tests for stingless bee honey produced by subfamily Meliponinae of genera Melipona, Scaptotrigona and Trigona intended for direct human consum ICS: 67.180.10 |
15 | TSHS 20,000/= USD 20 |
TZS 1921: 2016 | 2016 | Beehives — Specification Prescribes the requirements for Type A, Type B and Type C beehives. ICS: 65.140 |
20 | TSHS 25,000/= USD 25 |
TZS 1768: 2015 | 2015 | Code of practice for production, processing and handling of coffee beans Prescribes a Code of practice for production, processing and handling of coffee beans both Robusta and Arabica intended for human consumption. ICS: 67.140.20 |
12 | TSHS 20,000/= USD 20 |
TZS 2308: 2019 | 2019 | Sluice valve for water works purposes (50 to 1 200 mm size) — Specification Cover requirement for non-rising stem type sluice valves from 50 to 1 200 mm sizes used for water supply up to 45 °C and having double flanged ends for connections. ICS: 17.120.10 |
22 | TSHS 30,000/= USD 30 |
TZS 2010: 2017 | 2017 | Automotive maintenance workshop — Requirements Gives general requirement and technical parameters of basic types of garage and its equipment. ICS: 43.040.70 |
18 | TSHS 25,000/= USD 25 |
TZS 2390:2019/ISO 16293-2:2017 | 2019 | Glass in building — Basic soda lime silicate glass products — Part 2: Float glass Specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass for use in building, as defined in ISO 16293‑1. ICS: 81.040.20 |
12 | TSHS 20,000/= USD 20 |
TZS 2345-2: 2019- ISO 21138-2: 2007 | 2019 | Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene Specifies the definitions and requirements for pipes with a smooth external surface (Type A), fittings and systems based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and ICS: 23.040.20 |
41 | TSHS 50,000/= USD 50 |
TZS 2336: 2019 | 2019 | Acoustic — General tolerance limits for underwater noise Sets out general tolerance limits for underwater noise as a results of human activities (Anthropogenic) The standard identify and categorize all the sources of underwater noise into main thr ICS: 17.140.01 |
6 | TSHS 15,000/= USD 15 |
TZS 2327-1: 2019 | 2019 | Aerial bundled conductor systems — Part 1: General requirements and method of test Covers requirements and method of test for cores consisting of stranded conductors that are insulated with crosslinked polyethylene (XLPE) and that are intended for use in aerial bundled con 29.060.20 |
43 | TSHS 50,000/= USD 50 |
TZS 2304:2018 | 2018 | Footwear ― Sportswear ― Specification Prescribes the performance requirements of sports footwear for all sports regardless of design and materials. ICS:13.340.50 |
10 | TSHS 15,000/= USD 15 |
TZS 2297: 2018- EAS 890: 2018 | 2018 | Blended edible oils — Specification Specifies the requirements, sampling and test methods for blended edible oils of plant origin intended for human consumption. ICS 67.200.10 |
3 | TSHS 10,000/= USD 10 |
TZS 2296: 2018- EAS 889: 2018 | 2018 | Groundnuts for oil extraction — Specification Specifies the requirements, sampling and test methods for groundnuts of the fruit of the plant Arachis hypogea intended for oil extraction. NOTE Groundnuts may also be referred to as shelle ICS: 67.200.10 |
4 | TSHS 10,000/= USD 10 |
TZS 2207: 2018 | 2018 | Milk powder and cream powder — Specification Prescribes the requirements, methods of sampling and test for whole milk powder, partially skimmed milk powder, skimmed milk powder and cream powder intended for human consumption. ICS: 67.100.10 |
7 | TSHS 15,000/= USD 15 |
TZS 2225: 2018 | 2018 | Sugar cane syrup — Specification Specifies the requirements, methods of sampling and test for sugar cane syrup intended to be used as raw material in food and other industries such as catering purposes, soft drinks and ph ICS: 67.180.10 |
4 | TSHS 10,000/= USD 10 |
TZS 2226: 2018 | 2018 | Honey bee pollen — Specification Specifies the requirements and the methods of sampling and test bee pollen intended for human consumption. ICS: 67.180.10 |
6 | TSHS 15,000/= USD 15 |
TZS 2270: 2020- ISO 6327: 1981 | 2020 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers Describes hygrometers which determine the water content of a gas by detecting water vapour condensation occurring on a cooled surface or by checking the stability of the condensation on this ICS: 75.060 |
5 | TSHS 10,000/= USD 10 |
TZS 2271-3: 2020- ISO 6974-3: 2000 | 2020 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to Describes the precision that can be expected from the gas chromatographic method that is set up in accordance with ISO 6974-1. The stated precision provides values for the magnitude of varia ICS: 75.060 |
14 | TSHS 20,000/= USD 20 |
TZS 2272: 2020- ISO 6976: 2016 | 2020 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition Specifies methods for the calculation of gross calorific value, net calorific value, density, relative density, gross Wobbe index and net Wobbe index of natural gases, natural gas substitute ICS: 75.060 |
57 | TSHS 65,000/= USD 65 |
TZS 2273-2: 2020- ISO 10101-2: 1993 | 2020 | Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure Specified is passing a measured volume of gas through a cell containing a relatively small volume of absorbent solution. Water in the gas is extracted by the absorbent solution and subsequen ICS: 75.060 |
7 | TSHS 15,000/= USD 15 |
TZS 2273-3: 2020- ISO 10101-3: 1993 | 2020 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure Specifies general requirements for the determination. The principle of the method is reaction of water present in the test sample with iodine and sulfur-dioxide in a pyridine/methanol mixtur ICS: 75.060 |
3 | TSHS 10,000/= USD 10 |
TZS 2274: 2020- ISO 10715: 1997 | 2020 | Natural gas — Sampling guidelines Provide concise guidelines for the collection, conditioning and handling of representative samples of processed natural gas streams. It also contains guidelines for sampling strategy, probe ICS: 75.060 |
39 | TSHS 45,000/= USD 45 |
TZS 2275: 2020- ISO 23874: 2006 | 2020 | Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation Describes the performance requirements for analysis of treated natural gas of transmission or pipeline quality in sufficient detail so that the hydrocarbon dewpoint temperature can be calcul ICS: 75.060 |
26 | TSHS 35,000/= USD 35 |
TZS 2276: 2020- ISO 19739: 2004 | 2020 | Natural gas — Determination of sulfur compounds using gas chromatography Specifies the determination of hydrogen sulfide, carbonyl sulfide, C1 to C4 thiols, sulfides and tetrahydrothiophene (THT) using gas chromatography (GC). Depending on the method chosen from ICS: 75.060 |
55 | TSHS 60,000/= USD 60 |
TZS 2372: 2020- EAS 902: 2018 | 2020 | Bulk Liquefied Petroleum Gas (LPG) road tankers — Assembling — Requirements Specifies requirements for vehicle, equipment, accessories and assembling thereof used to form a bulk LPG road tanker for safe transportation, filling, and discharge operations. ICS: 43.080.10 |
32 | TSHS 40,000/= USD 40 |
TZS 2373: 2020- EAS 903: 2018 | 2020 | Road tankers — Welded steel tanks for Liquefied Petroleum Gas (LPG) — Design and manufacture Specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker tanks and their welded attachments manufactured from carbo ICS: 23.020.20 |
53 | TSHS 60,000/= USD 60 |
TZS 2374-1: 2020- EAS 924-1: 2018 | 2020 | Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 1: Storage and filling sites for refillabl Gives guidelines for the location, installation and operations of storage and filling sites for refillable liquefied petroleum gas (LPG) containers of capacity not exceeding 150 l. ICS: 75.160.30 |
16 | TSHS 25,000/= USD 25 |
TZS 2374-2: 2020- EAS 924-2: 2018 | 2020 | Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 2: LPG installations involving gas storage Gives guidelines for the layout, design and installation of butane, propane and LPG equipment and of storage vessels of combined water capacity not exceeding 9 000 L. These guidelines cover ICS: 75.160.30 |
29 | TSHS 35,000/= USD 35 |
TZS 2375: 2020- EAS 925: 2018 | 2020 | Inspection and testing of Liquefied Petroleum Gas (LPG) road tankers Specifies minimum requirements for the inspection and testing of the LPG road tanker which includes its tank, tank accessories and vehicle LPG equipment. NOTE There is no upper limit for th ICS: 43.080.10; |
11 | TSHS 20,000/= USD 20 |
TZS 2545-2: 2020- ISO 6689-2: 1997 | 2020 | Equipment for harvesting — Combines and functional components — Part 2: Assessment of characteristics and performance defined in vocabulary Specifies the methods and requirements in assessing the dimensions and performance of a combine and its functional components as defined in ISO 6689-1. It also allows comparison of combine p ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 2546-1: 2020- ISO 8909-1: 1994 | 2020 | Forage harvesters — Part 1: Vocabulary Specifies, in English and French, 70 terms and definitions relating to forage harvesters and their component parts: general terms, characteristics of functional components, machine and funct ICS: 65.060.50 |
17 | TSHS 25,000/= USD 25 |
TZS 2546-2: 2020- ISO 8909-2: 1994 | 2020 | Forage harvesters — Part 2: Specification of characteristics and performance Specifies the methods and requirements in assessing the dimensions and performance of a forage harvester, as defined in ISO 8909-1, and its functional components. Also allows comparison of f ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 2566-2: 2020- ISO 17089-2: 2012 | 2020 | Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 2: Meters for industrial applications Specifies requirements and recommendations for ultrasonic gas meters (USMs), which utilize acoustic signals to measure the flow in the gaseous phase in closed conduits. ICS: 17.120.10 |
38 | TSHS 45,000/= USD 45 |
TZS 2548: 2020- ISO 17103: 2009 | 2020 | Agricultural machinery — Rotary disc mowers, rotary drum mowers and flail mowers — Test methods and acceptance criteria for protective skirts Specifies requirements and acceptance criteria for testing the protective skirts of rotary disc mowers, rotary drum mowers and flail mowers used in agriculture. ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 2335: 2019 | 2019 | Tolerance limits for industrial effluents discharged into land and receiving water bodies — Oil and gas industry Specifies the applicable limits to effluents discharged from the oil and gas industry directly into land and receiving water bodies. The effluent parameters contained herein include physical ICS: 13.060.30 |
9 | TSHS 15,000/= USD 15 |
TZS 2286: 2018- ISO 21102: 2013 | 2018 | Adventure tourism — Leaders — Personnel competence This Technical Report indicates what the market normally considers as desirable competencies and the related expected results of competencies for adventure tourism activity leaders common to ICS: 03.200 |
8 | TSHS 15,000/= USD 15 |
TZS 2285: 2018- ISO 21101: 2014 | 2018 | Adventure tourism — Safety management systems — Requirements Outlines the requirements of a safety management system for adventure tourism activity providers. A provider can use this International Standard for the following: a) to enhance safety perf ICS: 03.200 |
22 | TSHS 30,000/= USD 30 |
TZS 2284: 2018- ISO 18513: 2003 | 2018 | Tourism services — Hotels and other types of tourism accommodation — Terminology Defines terms used in the tourism industry in relation to the various types of tourism accommodation and other related services. ICS: 01.040.03 |
11 | TSHS 20,000/= USD 20 |
TZS 2283: 2018- ISO 12818: 2013 | 2018 | Glass packaging — Standard tolerances for flaconnage Specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. ICS: 55.100 |
9 | TSHS 15,000/= USD 15 |
TZS 2282: 2018- ISO 73: 2009 | 2018 | Risk management — Vocabulary Provides the definitions of generic terms related to risk management. It aims to encourage a mutual and consistent understanding of, and a coherent approach to, the description of activities ICS: 01.040.03 |
8 | TSHS 15,000/= USD 15 |
TZS 2281: 2018- ISO 17021-1: 2015 | 2018 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements Contains principles and requirements for the competence, consistency and impartiality of bodies providing audit and certification of all types of management systems. ICS: 03.120.20 |
48 | TSHS 55,000/= USD 55 |
TZS 2280: 2018 (1st Ed) ISO /IEC 17025: 2017 | 2018 | General requirements for the competence of testing and calibration laboratories Specifies the general requirements for the competence to carry out test and/or calibration, including sampling. It coves testing and calibration performed using standard methods, non-standar ICS: 03.120.20 |
30 | TSHS 35,000/= USD 35 |
TZS 2279: 2018- EAS 877: 2017 | 2018 | Crude and semi refined palm oil — Specification Specifies the requirements, sampling and test methods for crude and semi refined (neutralized and/or bleached) palm oil derived from the fleshy mesocarp of the fruit of oil palm (Elaeis guin ICS: 67.060 |
4 | TSHS 10,000/= USD 10 |
TZS 2265: 2018 | 2018 | Solid waste management — Non-hazardous waste Specifies requirements to non hazardous - solid waste discharge from homes, institutions, industries and bussiness areas. It covers all stages from generation, segregation, collection, trans ICS: 13.030.10 |
5 | TSHS 10,000/= USD 10 |
TZS 2216-2: 2018- ISO 11479-2: 2011 | 2018 | Glass in building — Coated glass — Part 2: Colour of facade Specifies a method for objective evaluation of the colour of coated glass when used in facades and viewed from the outside, as well as for measuring colour differences within the same glass ICS: 81.040.20 |
7 | TSHS 15,000/= USD 15 |
TZS 2215-1: 2018- ISO 11479-1: 2011 | 2018 | Glass in building — Coated glass — Part 1: Physical defects Specifies optical quality requirements for coatings applied to glass using either pyrolytic, sol-gel or vacuum (sputtering) deposition methods for use in building glazing. More specifical ICS: 81.040.20 |
7 | TSHS 15,000/= USD 15 |
TZS 2214-5: 2018- ISO 13007-5: 2015 | 2018 | Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath c Gives terminology concerning the products, and specifies test methods (see Annex A) and values of performance requirements, for liquid-applied waterproofing products associated with tile adh ICS: 91.100.23 |
19 | TSHS 25,000/= USD 25 |
TZS 2184: 2018 | 2018 | Pork carcasses and cuts — Specification Prescribes the requirements, methods of sampling and test for Pork carcasses and cuts. ICS: 67.120 |
7 | TSHS 15,000/= USD 15 |
TZS 2181: 2018 | 2018 | Chicken meat (raw and spiced) — Specification Prescribes the requirements, sampling and test methods for raw and/or spiced chicken “Gallus domesticus” meat carcasses or cuts intended for human consumption. It covers raw and/or spiced fr ICS: 67.120.20, |
10 | TSHS 15,000/= USD 15 |
TZS 2179-7: 2018 ISO 710-7: 1984 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols Series of documents on graphical symbols for use on detailed maps, plans and geological cross-sections, comprises the following parts: ICS: 01.080.01, |
10 | TSHS 15,000/= USD 15 |
TZS 2179-6: 2018 ISO 710-6: 1984 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks Provides a series of graphical symbols to represent on a map, plan or geological cross-section, rocks which have originated as the result of contact metamorphism, of metasomatic, pneumatolyt ICS: 01.080.01, |
4 | TSHS 10,000/= USD 10 |
TZS 2179-5: 2018 ISO 710-5: 1989 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks Provides a unified series of Symbols and abbreviations for the representation of certain minerals often found in rocks, with a view to facilitating the characterization of certain rocks on d ICS: 01.080.01, |
3 | TSHS 10,000/= USD 10 |
TZS 2179-4: 2018- ISO 710-4: 1982 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks Provides a series of symbols and orna- ments for the representation of metamorphic rocks on detailed maps, especially large-scale maps, plans, and geological cross- sections. ICS: 01.080.01 |
4 | TSHS 10,000/= USD 10 |
TZS 2179-3: 2018- ISO 710-3: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks Provides a series of symbols and ornaments for the representation of magmatic rocks on detailed maps, especially large-scale maps, plans and geological cross-sections. ICS: 01.080.01, |
6 | TSHS 15,000/= USD 15 |
TZS 2179-2: 2018 ISO 710-2: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks Provides a unified series of symbols and ornaments for the representation of sedimentary rocks on detailed maps, plans and geological c r oss-sec t i on s. ICS: 01.080.01 |
7 | TSHS 15,000/= USD 15 |
TZS 2179-1: 2018 ISO 710-1: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation General rules for the representation of rocks and minerals on detailed maps, plans and geological cross-sections. Particular symbols and ornaments for rocks and minerals are given in the rel ICS: 01.080.01 |
1 | TSHS 10,000/= USD 10 |
TZS 2540:2020/ISO 3744:2010 | 2020 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane Specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping the noise source (machinery or equ ICS: 17.140.01 |
78 | TSHS 85,000/= USD 85 |
TZS 2538-6:2020/ISO 10816-6:1995 | 2020 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW Specifies the general conditions and procedures for the measurement and evaluation of vibration, using measurements made on the non-rotating parts of machines with power ratings above 100 kW ICS: 17.160 |
10 | TSHS 15,000/= USD 15 |
TZS 2538-3:2020/ISO 10816-3:2009 | 2020 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min Gives criteria for assessing vibration measurements when made in situ. The criteria specified apply to machine sets having a power above 15 kW and operating speeds between 120 r/min and 15 0 ICS: 17.160 |
12 | TSHS 20,000/= USD 20 |
TZS 2537-11:2020/ISO 21940-11:2016 | 2020 | Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour Establishes procedures and unbalance tolerances for balancing rotors with rigid behaviour. It specifies a) the magnitude of the permissible residual unbalance, b) the necessary number ICS: 91.120.40 |
28 | TSHS 35,000/= USD 35 |
TZS 2536:2020/ISO 3746:2010 | 2020 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane Specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping a noise source (machinery or equip ICS: 17.140.01 |
48 | TSHS 55,000/= USD 55 |
TZS 2535-1:2020/ISO 717-1:2013 | 2020 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation Defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different soun ICS: 91.120.20 |
18 | TSHS 25,000/= USD 25 |
TZS 2534-4:2020/ISO 12749-4:2015 | 2020 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing Lists unambiguous terms and definitions for concepts for dosimetry related to radiation processing using gamma radiation, X-radiation, or accelerated electrons. It is intended to facilitate ICS: 01.140.13 |
29 | TSHS 35,000/= USD 35 |
TZS 2518:2020/ISO 18227:2014 | 2020 | Soil quality — Determination of elemental composition by X-ray fluorescence Specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, and soil-like material by energy dispersive X-ray fluores ICS: 13.080.10 |
38 | TSHS 45,000/= USD 45 |
TZS 2517:2020/ISO 18105:2014 | 2020 | Soil quality — Detection of water soluble chromium(VI) using a ready-to-use test-kit method Describes the procedure to screen soil samples to detect Cr(VI) using test-kits based on water extraction of Cr(VI) in soil. The test-kit approach in this method is designed to quickly scree ICS: 13.080.10 |
14 | TSHS 20,000/= USD 20 |
TZS 2516:2020/ISO 14256-2:2005 | 2020 | Soil quality — Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution — Part 2: Automated method with segmented flow analysis Describes an automated method for the determination of nitrate, nitrite and ammonium in a 1 mol/l potassium chloride extract of field-moist soil samples. ICS: 13.080.10 |
12 | TSHS 20,000/= USD 20 |
TZS 2515:2020/ISO 15192:2010 | 2020 | Soil quality — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection Specifies a method for the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to ICS: 13.080.10 |
23 | TSHS 30,000/= USD 30 |
TZS 2514:2020/ISO 13914:2013 | 2020 | Soil quality — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS) Specifies a method for quantitative determination of 17 2,3,7,8-chlorine substituted dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls in sludge, treated biowaste ICS: 13.080.10 |
34 | TSHS 40,000/= USD 40 |
TZS 2277:2020 | 2020 | Standard specification for methane thermophysical property tables Provides thermophysical property tables for methane. The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic and ICS: 75.160.30 |
11 | TSHS 20,000/= USD 20 |
ZS 1500-: 2016 (2nd Ed)- ISO 6636/2:1981 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 15: Determination of zinc content - Atonic absorption spectrometric method Specifies an atomic absorption spec- trometric method for the determination of the zinc content of fruits, vegetables and derived products ICS 67.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 1499: 2015-ISO 6632:1981 | 2015 | Fruits, vegetables and derived products – Sampling and methods of test – Part 13: Determination of volatile acidity Specifies a method for the deter- mination of volatile acidity in fruits, vegetables and derived products ICS 67.080.01 |
9 | Tshs 15,000/=, USD 15 |
TZS 1498: 2012 (2nd Ed) -ISO 6557:1984 | 2012 | Fruits, vegetables and derived products – Sampling and methods of test – Part 12: Determination of ascorbic acid content - routine method Specifies two routine methods for the determination of the ascorbic acid content’) of fruits, vegetables and derived products ICS 67.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 1497: 2015 (2nd Ed) -ISO 5523:1981 | 2015 | Fruits, vegetables and derived products – Sampling and methods of test – Part 11: Liquid fruit and vegetable products – Determination of sulphur dioxide content (routine method) Specifies a routine method for the determination of the sulphur dioxide content of liquid fruit and vegetable products ICS 67.080.01 |
3 | TZS 10,000/-USD 10 |
TZS 1496: 2016 (2nd Ed)- ISO 2173:2003 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 10: Determination of soluble solids Specifies a refractometric method for the determination of the soluble solids in fruit and vegetable products ICS 67.080.01 |
8 | Tshs. 15,000/= USD 15 |
TZS 1495: 2016 (2nd Ed)- ISO 7952:1994 | 2016 | Fruits, vegetables and derived products Sampling and methods of test – Part 9: Determination of copper content – Method using flame atomic absorption spectrometry Specifies a flame atomic absorption spectrometric method for the determi- nation of the topper content of fruits, vegetables and derived products ICS 67.080.01 |
5 | TZS 10,000/-USD 10 |
TZS 1494: 2012 (2nd Ed)- ISO 5518:2007 | 2012 | Fruits, vegetables and derived products – Sampling and methods of test – Part 8: Determination of benzoic acid content – Spectrophotometric method Specifies a method for determining the benzoic acid content of fruits, vegetables and derived products ICS 67.080.01 |
5 | TZS 10,000/-USD 10 |
TZS 1493: 2016 (2nd Ed)- ISO 5517:1978 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 7: Determination of iron content – 1, 10 - phenanthroline photometric method Specifies a 1,10-phenanthroline photometric method for the determination of the iron content of fruits, vegetables and derived products ICS 67.080.01 |
3 | TZS 10,000/-USD 10 |
TZS 1492: 2016 (2nd Ed)- ISO 2447:1998 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 6: Determination of tin content Specifies a method for the determination of the tin content in fruit and vegetable products ICS 67.080 |
4 | TZS 10,000/-USD 10 |
TZS 1491: 2015 (2nd Ed) -ISO 1842:1991 | 2015 | Fruits, vegetables and derived products – Sampling and methods of test – Part 5: Determination of pH Specifies a potentio- metric method of measuring the pH of fruit and vegetable products ICS 67.080 |
6 | Tshs. 15,000/= USD 15 |
TZS 1490: 2016 (2nd Ed)- ISO 762:2003 | 2016 | Fruits, vegetables and derived products – Sampling and method of test – Part 4: Determination of mineral impurities content Specifies a method for the determination of the mineral impurities content (impurities generally originating from the soil) of fruit and vegetable products ICS 67.080.01 |
5 | TZS 10,000/-USD 10 |
TZS 1489: 2016 (2nd Ed)- ISO 751:1998 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 3: Determination of water- insoluble solids content Specifies a method for the determination of the content of water-insoluble solids in the edible parts of fruit and vegetable products ICS 67.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 1488: 2016- ISO 750: 1998 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 2: Determination of titratable acidy Specifies two methods for the determination of titratable acidity of fruits and vegetables products ICS. 67.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 1487: 2012 (1st Ed) | 2012 | Kashata – Specification Specifies requirements and methods of sampling and testing for Kashata intended for human consumption ICS 67.080.10 |
4 | TZS 10,000/-USD 10 |
TZS 1486:2012 (1st Ed) | 2012 | Infant formula – Determination of phosphorus content by spectrophotometric method Prescribes method for determination of phosphorus content in infant formula. The method is also applicable in determining phosphorus content in enteral products ICS 67.020 |
5 | Tshs. 10,000/= USD 10 |
TZS 1485: 2012 (1st Ed) | 2012 | Infant formula – Determination of mineral content by atomic absorption spectrophotometric method Prescribes method for the determination of mineral content in infant formula. The method is used in the determination of mineral content like calcium, magnesium, iron, zinc, copper, manganes ICS 67.020 |
6 | Tshs. 15,000/= USD 15 |
TZS 1484: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of vitamin A content by liquid chromatographic method Prescribes the method for the determination of Vitamin A content in milk based infant formula. The method is applicable to milk based infant formula containing more than 500 IU vitamin A per ICS 67.020 |
6 | Tshs. 15,000/= USD 15 |
TZS 1483: 2012 (1st Ed) | 2012 | Infant formula – Determination of total folates content by microbiological method Describes microbiological method for the determination of total folates in infant formula. The method is used in the determination of total folates in infant formula using the organism Lacto ICS: 07.100.30 |
8 | Tshs. 15,000/= USD 15 |
TZS 1482:2012(1st Ed) | 2012 | Containers for pharmaceutical dispensing – Specification for glass and plastics containers for solid dosage forms, semi-solids and powders Specifies requirements for materials, construction, capacity, neck finish and performance for glass and plastics containers and their closures intended for dispensing solid dosage forms, sem ICS: 55.120 |
16 | Tshs 25,000/= USD 25 |
TZS 2196-13: 2018- ISO 13061-13: 2016 | 2018 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage Specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood. ICS: 79.040 |
4 | TSHS 10,000/= USD 10 |
TZS 2156-4: 2018 - ARS 956-4: 2016 | 2018 | African traditional medicine — Medicinal plant standards — Calotropis procera Specifies requirements and related tests methods for Calotropis procera raw material to be used in consumer products including health, medicinal, veterinary and industrial products ICS: 11.120.10 |
45 | TSHS 50,000/= USD 50 |
TZS 2156-3: 2018 - ARS 956-3: 2016 | 2018 | African traditional medicine — Medicinal plant standards — Urtica dioica and urtica urens Specifies requirements and related tests methods for Urtica dioica L. and Urtica urens L. raw material to be used in consumer products including health, medicinal and cosmetic products ICS: 11.120.10 |
52 | TSHS 60,000/= USD 60 |
TZS 2156-2: 2018 - ARS 956-2: 2016 | 2018 | African traditional medicine — Medicinal plant standards —Ambrosia maritima Specifies requirements and related tests methods for Ambrosia maritima raw material to be used in consumer products including health, medicinal and industrial products. ICS: 11.120.10 |
17 | TSHS 25,000/= USD 25 |
TZS 2156-1: 2018 - ARS 956-1: 2016 | 2018 | African traditional medicine — Medicinal plant standards —Aloe vera Specifies requirements and related tests methods for Aloe vera raw material to be used in consumer products including health, cosmetics, health food, medicinal, veterinary and industrial pro ICS: 11.120.10 |
45 | TSHS 50,000/= USD 50 |
TZS 2155: 2018 - ARS 955: 2016 | 2018 | African traditional medicine — Technical guidelines for safety, efficacy and quality of raw materials and herbal medicines Provides technical guidelines to assure the safety, efficacy and quality of herbal raw materials and herbal medicines. ICS: 11.120.10 |
17 | TSHS 25,000/= USD 25 |
TZS 2154: 2018 - ARS 954: 2016 | 2018 | African traditional medicine — Minimum requirements for registration of plant based traditional medicines Specifies minimum criteria for plant based traditional medicinal products on safety of use, quality and therapeutic efficacy to facilitate the registration, marketing and distribution of sta ICS: 11.120.10 |
22 | TSHS 30,000/= USD 30 |
TZS 2153: 2018 - ARS 953: 2016 | 2018 | African traditional medicine — Certification scheme for medicinal plant produce Covers certification of medicinal plants produce both from cultivated and wild collected sources. Producers/collectors can achieve certification under any one of the two options described in ICS: 11.120.10 |
42 | TSHS 50,000/= USD 50 |
TZS 2152: 2018 - ARS 952: 2016 | 2018 | African traditional medicine — Requirements on good agricultural and collection practices (GACP) for medicinal plants Provides guidelines aimed at advising medicinal plant producers and collectors on how to improve the safety, efficacy and quality standards of raw materials used in the production and prepar ICS: 11.120.10 |
37 | TSHS 45,000/= USD 45 |
TZS 2151: 2018 - ARS 951: 2016 | 2018 | African traditional medicine — Good manufacturing practices (GMP) for herbal medicines Provides guidelines on good manufacturing practices aimed at ensuring the safety, efficacy and quality of herbal medicinal products for human consumption. ICS: 11.120.10 |
28 | TSHS 35,000/= USD 35 |
TZS 2150: 2018 - ARS 950: 2016 | 2018 | African traditional medicine — Terms and terminology Provides the various terminologies on African medicinal plants, related herbal products as well as common terms on diseases and aims to ensure the safety, efficacy and quality of herbal med ICS: 11.120.10 |
9 | TSHS 15,000/= USD 15 |
TZS 2147: 2018 - EAS 866: 2017 | 2018 | Paper sacks for packaging of cement — Specification. Specifies requirements, sampling and test methods for valve sewn-gusseted and valve-pasted ends paper sacks for packaging of cement ICS 85.080.99 |
9 | TSHS 15,000/= USD 15 |
TZS 2149: 2018 - EAS 869: 2017 | 2018 | Wrapping paper — Specification Specifies requirements, sampling and test methods for wrapping paper ICS: 85.080.01, |
5 | TSHS 10,000/= USD 10 |
TZS 2148: 2018 - EAS 867: 2017 | 2018 | Waxed paper for bread wrap — Specification. Specifies requirements, sampling and test methods for waxed paper for bread wrap. ICS: 85.080.01, |
15 | TSHS 20,000/= USD 20 |
TZS 2146: 2018 - EAS 865: 2017 | 2018 | Corrugated fibreboard boxes for general packaging — Specification Specifies requirements, sampling and test methods for corrugated fibreboard boxes for general packaging. This standard does not include special treatment measures of the boxes in case of exp ICS: 85.080.30 |
17 | TSHS 25,000/= USD 25 |
TZS 1480(Part 3): 2012(1st Ed) | 2012 | Food products – Veterinary drugs residues – Part 3: Determination of multiple sulfonamides residues in raw cow’s milk by Liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in cow’s milk ICS: 11.220 |
9 | Tshs. 15,000/= USD 15 |
TZS 2145: 2018 - EAS 860: 2017 | 2018 | Base paper for waxed bread wrap — Specification Specifies requirements, sampling and test methods for base paper for waxed bread wrap. ICS: 85.080.01 |
5 | TSHS 10,000/= USD 10 |
TZ 1480 (Part 2): 2012 (1st Ed) | 2012 | residues Part 2: Determination of multiple tetracycline residues in cow’s milk by metal chelate affinity – Liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in cows’ milk ICS 11.220 |
9 | Tshs. 15,000/= USD 15 |
TZS 1479: 2011 (1st Ed) | 2011 | Food products – Veterinary drugs residues – Part 1: Determination of tetracycline residues in edible animal tissues by liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in Edible Animal Tissues by Liquid ICS 11.220 |
8 | Tshs. 15,000/= USD 15 |
TZS 1478: 2013 | 2013 | Protective helmets for motorcycle riders – Specification Specifies the requirements regarding material, construction, workmanship, finish, mass and performance for protective helmets (with or without lower face cover) for everyday use by motorcycl ICS: 13.340.20 |
25 | Tshs 30,000/= USD 30 |
TZS 2144: 2018 - EAS 878: 2017 | 2018 | Antibacterial bathing bar — Specification Specifies the requirements, sampling and test methods for solid antibacterial bathing bars. This standard applies to antibacterial bathing bars supplied in the form of bars/cakes and produc ICS 77.100.40 |
30 | TSHS 35,000/= USD 35 |
TZS 1477: 2017 (2nd Ed) | 2017 | Specification for steel sheet, metallic coated by the hot-dip process and pre-painted by the coil-coating process for exterior exposed building products Covers sheet metallic coated by the hot-dip and coil-coated with organic films for exterior exposed building products of various qualities. Sheet of this designation is furnished in coils, c ICS 77.140.50 |
9 | Tshs. 15,000/= USD 15 |
TZS 1476: 2012 (2nd Ed) | 2012 | Hot-dip aluminium-zinc coated plain, corrugated and troughed steel sheets – Specification Specifies the requirements for continuous hot-dip aluminium-zinc (AZ) coated plain, corrugated and troughed steel sheets for roofing, cladding, fabrication and general use ICS 77.140.50 |
10 | Tshs 15,000/=, USD 15 |
TZS 1475: 2017 (2nd Ed) | 2017 | Sheet roof and wall covering – Aluminium alloy corrugated and troughed sheet Covers four types of straight corrugated, and six types of straight troughed aluminium alloy sheets ICS: 77.140.50 |
15 | Tshs. 20,000/= USD 20 |
TZS 2143: 2018 - EAS 877: 2017 | 2018 | Bathing bar — Specification This specifies requirements, sampling and test methods for bathing bars. This standard applies to bathing bars supplied in the form of bars/cakes and produced from vegetable or animal oils o ICS: 71.100.40, |
3 | TSHS 10,000/= USD 10 |
TZS 1474: 2012 (1st Ed)- EAS 54:1999 | 2012 | Burnt building bricks – Specification Specifies building bricks of burnt clay, shale or brick earth for use in buildings for decoratives, structural and non-structural purposes. It also specifies sampling and testing methods ICS 91.100.10 |
14 | Tshs. 20,000/= USD 20 |
TZS 2142-9: 2018 | 2018 | Mini-grid systems — Part 9: Interconnection of less than 1 MW of generation with the national grid provides a framework within which consumers and mini-grid developers know what the minimum requirements are for service quality including service voltage level ranges at the consumer premise ICS: 29.240.20 |
9 | TSHS 15,000/= USD 15 |
TZS 1473: 2011(1st Ed) IEC 60238:2008 | 2011 | Edison screw lampholders Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in a.c. c ICS: 29.140.10 |
76 | Tshs 85,000/= USD 85 |
TZS 2142-8: 2018 | 2018 | Mini-grid systems — Part 8: Electricity metering-minimum accuracy and environmental requirements Specifies the minimum level of functionality requirements for three phase or single phase, total current, static kilowatt-hour (kWh) meters to be installed in distribution networks of mini-g ICS: 17.220.20, |
9 | TSHS 15,000/= USD 15 |
TZS 2142-7: 2018 | 2018 | Mini-grid systems — Part 7: Underground power cables for rated voltages 0.6kV/1kV (Um 1.2kV) Covers minimum technical requirements for the design, manufacture, testing, supply, and performance of single and multicore armoured or unarmoured power cables rated 0.6/1 (1.2) kV U0/U (Um) ICS:29.060.20 |
5 | TSHS 10,000/= USD 10 |
TZS 1472:2011(1st Ed-) IEC 61184:2008 | 2011 | Bayonet lampholders Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. Also applies to switched-lampholders for use in a.c. circ ICS: 29.140.10 |
62 | Tshs 70,000/= USD 70 |
TZS 2142-6: 2018 | 2018 | Mini-grid system — Part 6: Aerial bundled cables (ABC) (0.6/1kV Covers minimum technical requirements for the design, manufacture, testing and supply of two, three, and four core twisted unsheathed cable rated 0.6/1 kV (Um=1.2kV) for use on 230/400V, 50 ICS: 29.060.20, |
8 | TSHS 15,000/= USD 15 |
TZS 1471: 2018 (2nd Ed) | 2018 | Tolerance limits for environmental vibration Specifies limits for general environmental vibration including occupational environment and air overpressure. Tolerance limits in this Tanzania Standard are given with a view to protect peop ICS 13.020 |
11 | Tshs. 20,000/= USD 20 |
TZS 2142-4: 2018 | 2018 | Mini-grid systems — Part 4: Low voltage (LV) underground distribution network Covers minimum technical requirements for the design and construction of underground low voltage, single phase and three-phase, power distribution networks for mini-grid systems. ICS: 29.240.01 |
14 | TSHS 20,000/= USD 20 |
TZS 2142-3: 2018 | 2018 | Mini-grid systems — Part 3: Overhead lines for low voltage and medium voltage distribution networks Covers minimum technical requirements for the design and construction of overhead single phase and three phase power distribution networks to be used in mini-grid systems. This Tanzania Stan ICS: 29.240.20 |
54 | TSHS 60,000/= USD 60 |
TZS 2142-2: 2018 | 2018 | Mini-grid systems — Part 2: Application of inverters Covers power electronics (primarily inverters), which are used to connect distributed generation equipment (specifically photovoltaic arrays and battery systems) to mini-grid power systems. ICS: 27.160, |
5 | TSHS 10,000/= USD 10 |
TZS 2133: 2018- EAS 868: 2017 | 2018 | Natural and extensible sack Kraft paper — Specification Specifies requirements, sampling and test methods for natural and extensible sack Kraft paper. ICS: 85.080.01 |
3 | TSHS 10,000/= USD 10 |
TZS1460:2017 (1st Ed)- ISO 10015:1999 | 2017 | Quality management - Guidelines for training Covers the development, implementation, maintenance, and improvement of strategies and systems for training that affect the quality of the products supplied by an organization ICS 03.120.10 |
20 | Tshs 25,000/= USD 25 |
TZS 1459: 2011 (1st Ed)- ISO 10006: 2003 | 2011 | Quality management systems – Guidelines for quality management in projects Gives guidance on the application of quality management in projects. It is applicable to projects of varying complexity, small or large, of short or long duration, in different environments, ICS 03.120.10 |
35 | Tshs 40,000/= USD 40 |
TZS 1458: 2011 (1st Ed)- ISO/TR 10013: 2001 | 2011 | Guidelines for quality management system documentation Provides guidelines for the development and maintenance of the documentation necessary to ensure an effective quality management system, tailored to the specific needs of the organization. ICS 03.120.10 |
19 | Tshs 25,000/= USD 25 |
TZS 1457: 2011- ISO 10006:2003 | 2011 | Quality management system - Guidelines for the quality management in projects Gives guidance on the application of quality management in projects. It is applicable to projects of varying complexity, small or large, of short or long duration, in different environments, ICS 03.120.10 |
27 | Tshs 35,000/= USD 35 |
TZS 1456: 2011 (1st Ed)- ISO 10007: 2003 | 2011 | Quality management systems – Guidelines for configuration management Gives guidance on the use of configuration management within an organization. It is applicable to the support of products from concept to disposal ICS 03.120.10 |
15 | Tshs 20,000/= USD 20 |
TZS 1455:2011 (1st Ed) -ISO 10002:2004 | 2011 | Quality management – Customer Satisfaction-Guidelines for complaints handling in organizations Provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaints handlin ICS 03.120.10 |
30 | Tshs 35,000/= USD 35 |
TZS 1454:2011 (1st Ed) -ISO 10012:2003 | 2011 | Measurement management systems - Requirements for measurement processes and measuring equipment Specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate complian ICS 03.120.10; 17.020 |
25 | Tshs. 30,000/= USD 30 |
TZS 1453: 2011 (1st Ed) | 2011 | HIV and AIDS management system –General requirements Specifies general requirements for HIV and AIDS management systems (HAMS). It is applicable to any organization that wishes to establish, implement, maintain and improve an HIV and AIDS mana ICS 03.120.10 |
17 | Tshs 25,000/= USD 25 |
TZS 1452-8: 2012(1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 8: Test methods for overall migration into olive oil by article filling Specifies test methods for the determination of the overall migration into fatty food simulants from plastic materials and articles by filling of test specimens with a fatty food simulant at ICS: 85.060 |
33 | Tshs 40,000/= USD 40 |
TZS 1452-7: 2012 (1st Ed) | 2012 | Materials and Articles in contact with foodstuffs – Plastics – Part 7: Test methods for overall migration into aqueous food simulants using a pouch Specifies test methods for the determination of the overall migration into aqueous based food simulants from plastics which are intended to come into contact with foodstuffs, by forming the ICS 85.060 |
12 | Tshs. 20,000/= USD 20 |
TZS 1452-6:2012 | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 6: Test methods for overall migration into olive oil using a pouch Specifies test methods for the determination of the overall migration into fatty food simulants from one surface only of plastics in the form of film or sheet, which is intended to come into ICS: 85.060 |
27 | Tshs 35,000/= USD 35 |
TZS 1452-5: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 5: Test methods for overall migration into aqueous food simulants by cell Specifies test methods for the determination of the overall migration into aqueous based food simulants from one surface only of plastics, which are intended to come into contact with foodst ICS 67.250 |
9 | Tshs. 15,000/= USD 15 |
TZS 1452-4: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 4: Test methods for overall migration into olive oil by cell Specifies test methods for the determination of the overall migration into fatty food simulants, from one surface only of plastics in the form of sheet and film at temperatures above 20°C an ICS 85.060 |
27 | Tshs 35,000/= USD 35 |
TZS 1452-3: 2012 (1st Ed) | 2012 | Materials and Articles in contact with foodstuffs – Plastics - Part 3: Test methods for overall migration into aqueous simulants by total immersion Specifies test methods for the determination of the overall migration into aqueous based food simulants from plastics which are intended to come into contact with foodstuffs, by total immers ICS 67.250 |
11 | Tshs. 20,000/= USD 20 |
TZS 1452-2: 2011 (1st Ed) | 2011 | Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion Describes test methods for the determination of the overall migration into fatty food simulants from plastics materials and articles, by total immersion of test specimens in a fatty food sim ICS 67.250 |
28 | Tshs 35,000/= USD 35 |
TZS 1452-1: 2011 (1st Ed) | 2011 | Materials and articles in contact with the food staffs - Plastics – Part 1: Guide to the selection of conditions and test methods for overall migration Provides a guide to the selection of the appropriate conditions and test methods for the determination of overall migration into food simulants and test media from plastics which are intende ICS 55.040 |
45 | Tshs 50,000/= USD 50 |
TZS 1451;2011- ISO/IEC 27000: 2009 | 2011 | Information technology – Security techniques – Information security management systems – Overview and vocabulary Provides: a) an overview of the ISMS family of standards; • b) an introduction to information security management systems (ISMS); • c) a brief description of the Plan-Do-Check-Act (PDCA) p ICS: 01.040.35 |
19 | Tshs 25,000/= USD 25 |
TZS 1450:2011- ISO 18902: 2007 | 2011 | Imaging materials – Processed imaging materials – Albums, framing and storage materials Specifies the principal physical and chemical requirements for filing enclosures, containers, albums and frames, particularly designed for storing wet or dry processed films, plates and pape ICS: 37.040.20 |
15 | Tshs. 20,000/= USD 20 |
TZS 1449:2011- ISO 11108: 1996 | 2011 | Information and documentation – Archival paper – Requirements for permanence and durability Specifies the requirements for archival paper. It is applicable to unprinted papers intended for documents and publications required for permanent retention and frequent use. For these docum ICS: 01.040.20 |
4 | Tshs 10,000/= USD 10 |
TZS 1448:2011- ISO 16245: 2009 | 2011 | Information and documentation – Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents Specifies requirements for boxes and file covers, made of cellulosic material, to be used for long term storage of documents on paper or parchment. It is applicable to boxes made of solid or ICS: 01.040.20 |
7 | Tshs. 15,000/= USD 15 |
TZS1447:2011- ISO/IEC 27001: 2005 | 2011 | Information technology - Security techniques information security management systems - Requirements Specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a documented ISM within the context of the organization’s overall busin ICS 35.040 |
34 | Tshs 40,000/= USD 40 |
TZS 1446: 2011-ISO 5564: 1982 | 2011 | Black pepper and white pepper, whole or ground – Determination of piperine content – Spectrophotometric method Specifies a spectrophotometric method for the determination of the piperine content of black or white pepper (Piper nigrum L), in whole or in ground form ICS 67.220.10 |
2 | TZS 10,000/-USD 10 |
TZS 1445: 2011- ISO 3165:1976 | 2011 | Sampling of chemical products for industrial use –Safety in sampling Gives the recommendations relating to safety in the sampling of chemical products for industrial use ICS 71.100.01 |
6 | Tshs. 15,000/= USD 15 |
TZS 1444:2011 - ISO 6206:1979 | 2011 | Chemical products for industrial use-sampling-vocabulary Defines in English the terms most frequently used in relation to sampling of chemical products for industrial use. These terms have been grouped according to the classification; general term ICS 71.100.01 |
7 | Tshs 15,000/=, USD 15 |
TZS 1443: 2011- ISO8213:1986 | 2011 | Chemical Products for Industrial Use-Sampling Techniques-Solid chemical products in the form of particles varying from powders to coarse lumps Describes the general techniques of taking and preparing samples with a view to the assessment of a solid chemical product lot, for use in conjunction with a previously established sampling ICS 71.100.01 |
31 | Tshs 40,000/= USD 40 |
TZS 1442 (Part 1):2017 (2nd Ed) | 2017 | Soil shear test Part 1 - Direct shear stress Specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations ICS 13.080.20 |
15 | Tshs. 20,000/= USD 20 |
TZS 1441: 2017(2nd Ed)- ISO 8970: 2010 | 2017 | Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density Specifies a method, based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of connections made with mechanical fasteners ICS 91.080.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1440-1: 2017 (2nd Ed)-ISO 22389-1: 2010 | 2017 | Timber structures — Bending strength of I-beams - Part 1: Testing, evaluation and characterization Specifies the requirements for prefabricated wood-based I-beams used as structural members in bending applications ICS 91.080.20 |
28 | Tshs 35,000/= USD 35 |
TZS 1439-2: 2017(2nd Ed)- ISO10984-2: 2009 | 2017 | Timber structures — Dowel-type fasteners Part 2: Determination of embedding strength Specifies laboratory methods for determining the embedding strength of solid timber, glued laminated timber and wood-based sheet products with dowel-type fasteners ICS 91.080.20 |
17 | Tshs 25,000/= USD 25 |
TZS 1439-1:2017 (2nd Ed)- ISO10984-1:2009 | 2017 | Timber structures — Dowel-type fasteners Part 1: Determination of yield moment Specifies a laboratory method for determining the yield moment of dowel-type fasteners ICS 91.080.20 |
17 | Tshs 25,000/= USD 25 |
TZS1438:2011 (1st Ed) -ISO10983:1999 | 2011 | Timber structures — Solid timber finger - jointing — Production requirements Specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members ICS 91.080.20 |
19 | Tshs 25,000/= USD 25 |
TZS 1437: 2017 (2nd Ed) | 2017 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics General principles for the determination of the strength and deformation (slip) characteristics of joints made with mechanical fasteners ICS 91.080.20 |
6 | Tshs. 15,000/= USD 15 |
TZS1436 (Part 2): 2011 (1st Ed) | 2011 | Gypsum binders and gypsum plasters – Part 2: Test methods Describes the reference test methods for all gypsum binders and gypsum plasters covered by TZS 1436-1 ICS. 91.100.10 |
20 | Tshs 25,000/= USD 25 |
13TZS 1436-1: 2011 (1st Ed) | 2011 | Gypsum binders and gypsum plasters – Part 1: Definition and requirements Specifies the characteristics and performance of powder products based on gypsum binder for building purposes. This includes premixed gypsum building plasters for plastering of walls and cei ICS 91.100.10 |
15 | Tshs. 20,000/= USD 20 |
TZS 1435: 2011- ISO 26986: 2010 | 2011 | Resilient floor coverings – Expanded (cushioned) poly (vinyl chloride) floor covering – Specification Specifies the characteristics of floor coverings based on expanded (cushioned) poly (vinyl chloride), supplied as either tiles or rolls ICS 97.150 |
8 | Tshs. 15,000/= USD 15 |
TZS 1434-4: 2018 - ISO 13007-4:2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 4: Test methods for grouts Describes test methods for determining characteristics for grouts used in the installation of ceramic tiles. The test methods described are the following; determination of flexural and compr ICS 91.100.23 |
21 | Tshs. 30,000/= USD 30 |
TZS 1434-3: 2018 -ISO 13007-3: 2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 3: Terms, definitions and specifications for grouts Defines terms concerning the product, working methods and application properties for ceramic tile grouts. It specifies values of performance requirements for all ceramic tile grouts [cementi ICS 91.100.23 |
7 | Tshs. 15,000/= USD 15 |
TZS 1434-2: 2018- ISO 13007-2: 2010 | 2018 | Ceramic tiles – Grouts and adhesives – Part 2: Test methods for adhesives Describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are the following: a) determination of open time; b ICS: 91.100.23 |
35 | Tshs 40,000/= USD 40 |
TZS 1434-1:2018- ISO 13007-1: 2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 1: Terms, definitions and specifications for adhesives Defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [ ICS 91.100.23 |
8 | Tshs. 15,000/= USD 15 |
TZS 1433: 2017 (1st Ed) | 2017 | Pilau masala – Specification Prescribes the requirements and the methods of sampling and test for pilau Masala ICS 67.220.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1432: 2017 (1st Ed) | 2017 | Refined olive oil and refined olive pomace oil – Specification Prescribes the requirements and methods of sampling and test for refined olive oil and refined olive pomace oil intended for direct human consumption ICS 67.200 |
8 | Tshs. 15,000/= USD 15 |
TZS1431: 2017 (2nd Ed) | 2017 | Refined edible rapeseed (canola) oil – Specification Prescribes requirements, methods of sampling and test for refined edible rapeseed (canola) oil ICS 67.220 |
9 | Tshs. 15,000/= USD 15 |
TZS 2119: 2018- EAS 64: 2017 | 2018 | Groundnut (peanut) oil for cosmetic industry — Specification specifies the requirements, sampling and test methods for groundnut (peanut) oil for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2116: 2018 - ISO 14930: 2012 | 2018 | Leather — Leather for dress gloves — Specification Specifies the requirements, sampling and methods of testing for chrome and chrome-alum tanned leather used for the manufacture of dress gloves. This International Standard does not apply t ICS: 59.140.30, |
3 | TSHS 10,000/= USD 10 |
TZS 2115-3: 2018 - ISO 28499-3: 2009 | 2018 | Buffalo hides and buffalo calf skins — Part 3: Grading on the basis of defects Provides guidance on the classification of raw or cured, trimmed buffalo hides and buffalo calf skins, intended for tanning, on the basis of visually apparent defects. It applies to water-bu ICS: 59.140.20 |
3 | TSHS 10,000/= USD 10 |
TZS 2115-2: 2018 - ISO 28499-2: 2009 | 2018 | Buffalo hides and buffalo calf skins — Part 2: Grading on the basis of mass and size provides guidance on the classification of raw, wet-salted, dry-salted and dried buffalo hides and buffalo calf skins intended for tanning. It applies to water-buffalo hides and water-buffal ICS: 59.140.20, |
4 | TSHS 10,000/= USD 10 |
TZS 2115-1: 2018 - ISO 28499-1: 2009, | 2018 | Buffalo hides and buffalo calf skins — Part 1: Description of defects intended for tanning. It applies to water-buffalo hides and water-buffalo calf skins and not to those of wild buffalo and American bison (Bison bison). ICS: 59.140.20, |
4 | TSHS 10,000/= USD 10 |
TZS 2114: 2018 - ISO 11398: 2012 | 2018 | Leather — Raw ostrich skins — Descriptions of defects, guidelines for presentation and grading on the basis of defects Descriptions of defects in raw ostrich skins and guidelines for the Presentation and grading of ostrich skins based on these defects ICS: 59.140.20 |
6 | TSHS 15,000/= USD 15 |
TZS 2113: 2018 - ISO 11396: 2012 | 2018 | Crocodile skins — Presentation, description of defects, grading on the basis of defects, size (length) and origin. Describes the presentation of crocodile skins and defects which may occur. It provides guidelines for grading crocodile skins on the basis of defects, size (length) and origin. ICS: 59.140.20, |
5 | TSHS 10,000/= USD 10 |
TZS 2112-3: 2018 - ISO 7482-3:2005 | 2018 | Raw goat skins — Part 3: Guidelines for grading on the basis of defects. Prescribes guidelines for the classification of raw or cured, trimmed goat skins on the basis of visually apparent defects. ICS: 59.140.20, |
13 | TSHS 20,000/= USD 20 |
TZS 2112-2: 2018 - ISO 7482-2: 1999 | 2018 | Raw goat skins — Part 2: Guidelines for grading on the basis of mass and size Prescribes guidelines for grading raw goat skins in the fresh and the cured (including sundried) condition on the basis of their mass and size. ICS: 59.140.20, |
3 | TSHS 10,000/= USD 10 |
TZS 2084: 2017 | 2017 | Modified safari vehicles — Code of practice for safari vehicles modification Gives guidelines for modified motor vehicles that are used in wildlife hunting and transportation of tourist within Tanzania national parks and other tourist attractions. ICS: 43.040.60 |
16 | TSHS 25,000/= USD 25 |
TZS 2096-2: 2017- ISO 17892-2: 2014 | 2017 | Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density Specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. ICS: 93.020, |
14 | TSHS 20,000/= USD 20 |
TZS 2098-2: 2017- ISO 22476-2: 2005 | 2017 | Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing Specifies requirements for indirect investigations of soil by dynamic probing within the scope of the geotechnical investigations according to prEN 1997. ICS: 93.020 |
30 | TSHS 35,000/= USD 35 |
TZS 2099-3: 2017- ISO 22476-3: 2005 | 2017 | Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test Specifies requirements for indirect investigations of soil by standard penetration tests within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2 to complimen ICS: 93.020 |
14 | TSHS 20,000/= USD 20 |
TZS 2088: 2018- ISO 562: 2010 | 2018 | Hard coal and coke — Determination of volatile matter Specifies a method of determining the volatile matter of hard coal and of coke. It is not applicable to brown coals and lignites. ICS: 73.040 |
8 | TSHS 15,000/= USD 15 |
TZS 2087: 2018- ISO 17247: 2013 | 2018 | Coal — Ultimate analysis Establishes a practice for the ultimate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. ICS: 73.040 |
5 | TSHS 10,000/= USD 10 |
TZS 2086: 2018- ISO 17246: 2010 | 2018 | Coal — Proximate analysis Establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. ICS: 73.040 |
5 | TSHS 10,000/= USD 10 |
TZS 2083: 2017 | 2017 | Icing sugar — Specification Prescribes the requirements and the methods of sampling and test for icing sugar. ICS:67.180.10, |
6 | TSHS 15,000/= USD 15 |
TZS 2081: 2017 | 2017 | Cookies — Specification Prescribes the requirements and sampling and test methods for cookies baked from batter intended for direct human consumption. ICS: 67.060 |
8 | TSHS 15,000/= USD 15 |
TZS 2080: 2017 | 2017 | Buns — Specification Specifies the requirements, methods of sampling and test for buns intended for direct human consumption. ICS: 67.060 |
6 | Tshs. 15,000/= USD 15 |
TZS 2079: 2017 | 2017 | Engine coolants — Specification Covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 40 % to 70 ICS: 71.100.45 |
6 | Tshs. 15,000/= USD 15 |
TZS 2078: 2017 | 2017 | Geological exploration by geophysical method (Seismic refraction) — Code of practice deals with seismic refraction method including the equipment, field procedures, and interpretation of data for assessment of subsurface materials. Seismic refraction measurements, as describ ICS: 93.020 |
11 | Tshs. 20,000/= USD 20 |
TZS 2077: 2017 | 2017 | Geological exploration by geophysical method (Electrical resistivity) — Code of practice Lays down a summary of the best practice for geological exploration by electrical resistivity method including equipment, field procedures, and interpretation of data for measurement of the ICS: 93.020 |
14 | Tshs. 20,000/= USD 20 |
TZS 2076: 2017 | 2017 | Subsurface exploration by pits, trenches, drifts and shafts — Code of practice Lays down the method for subsurface exploration by means of pits, trenches, drifts and shafts. ICS: 93.020 |
12 | Tshs. 20,000/= USD 20 |
TZS 2075: 2017 | 2017 | Classification of terminologies for exploration of mineral deposits Specifies the definitives for classification of terminologies pertaining to resources and reserves of economic mineral deposits subjected to appraisal through mineral exploration and norms o ICS: 93.020 |
14 | Tshs. 20,000/= USD 20 |
TZS 2074-2: 2017 | 2017 | Glossary of mining terms — Part 2: Boring and exploration Covers the definitions of terms used in mining industry in connection with boring and exploration. ICS: 01.040.73 |
15 | Tshs. 20,000/= USD 20 |
TZS 2074-1: 2017 | 2017 | Glossary of mining terms — Part 1: Surveying Covers the definition of terms used in mining industry in connection with mine surveying. ICS:59.080.20 |
11 | Tshs. 20,000/= USD 20 |
TZS 2068: 2017 | 2017 | Receiving waters — Specification Specifies the requirements, sampling and methods of test for receiving waters ICS:13.060.01, |
6 | Tshs. 15,000/= USD 15 |
TZS 2067: 2017 | 2017 | Water for irrigation — Specification Specifies the requirements, sampling and methods of test of water for irrigation purposes. ICS: 13.060.01, |
5 | TZS 10,000/-USD 10 |
TZS 2066: 2017 | 2017 | Water for aquaculture — Specification Specifies the requirements, sampling and methods of test of water for aquaculture purposes. ICS: 13.060.01, |
4 | TZS 10,000/-USD 10 |
TZS 2065: 2017 | 2017 | Water for construction — Specification Specifies the requirements, sampling and methods of test of water that is used for construction purposes. ICS: 13.060.01 |
2 | TZS 10,000/-USD 10 |
TZS 2064: 2017 | 2017 | Carbonated and /or flavoured drinking water — Specification Specifies the requirements, sampling and methods of test for carbonated (sparkling), flavoured and carbonated flavoured drinking water. ICS: 13.060.20 |
10 | Tshs. 15,000/= USD 15 |
TZS 2063: 2018 | 2018 | Dried tropical fruits — Specification prescribes requirements and methods of sampling and tests for dried tropical fruits of Carica spp. (papaya), Ananas spp. (pineapple) and Artocarpus spp. (jackfruit) which have been suitably ICS: 67.080, |
11 | Tshs. 20,000/= USD 20 |
TZS 2060: 2018- EAS 66-3: 2017 | 2017 | Tomato products — Specification — Part 3: Tomato juice Specifies requirements, sampling and test methods for unfermented but fermentable juice, intended for direct consumption, obtained from fresh tomatoes (Lycopersicum esculentum L.), puree, pa ICS: 67.080.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 2059: 2018- EAS 66-1: 2017 | 2017 | Tomato products — Specification — Part 1: Canned (preserved) tomato Specifies the requirements, samplingand test methods for canned (preserved) tomatoes. ICS: 67.080.20, |
7 | Tshs. 15,000/= USD 15 |
TZS 2058: 2018- EAS 894: 2017 | 2018 | Fresh onions — Specification Specifies the requirements, sampling and tests methods for fresh bulb onions Allium cepa (L.) of the family Alliaceae to be supplied to the consumer. This standard does not apply to onions f ICS: 67.080.10, |
6 | Tshs. 15,000/= USD 15 |
TZS 2056: 2017 ISO 16297: 2013 | 2017 | Milk — Bacterial count — Protocol for the evaluation of alternative methods Gives guidelines for the evaluation of instrumental alternative methods for total bacterial count in raw milk from animals of different species. NOTE The document is considered complementary ICS: 67.100 |
13 | Tshs. 20,000/= USD 20 |
TZS 2055: 2017 ISO 17758: 2014 | 2017 | Instant dried milk — Determination of the dispersibility and wettability Specifies a method for the determination of the dispersibility in water of instant dried milk. The method is applicable to instant dried skimmed milk manufactured by either the “straight-thr ICS: 67.100 |
10 | Tshs. 15,000/= USD 15 |
TZS 2053: 2017 ISO 19344: 2015 | 2017 | Milk and milk products — Starter cultures, probiotics and fermented products — Quantification of lactic acid bacteria by flow cytometry Specifies a standardized method for the quantification of active and/or total lactic acid bacteria and probiotic strains in starter cultures used in dairy products by means of flow cytometry ICS: 67.100 |
25 | Tshs. 30,000/= USD 30 |
TZS 2052: 2017 ISO 27105: 2016 | 2017 | Milk and cheese — Determination of hen’s egg white lysozyme content by high performance liquid chromatography Specifies a method for the quantitative determination of hen’s egg white lysozyme content in milk and cheese. The method is suitable for measuring low levels of hen’s egg white lysozyme with ICS: 67.100 |
11 | Tshs. 20,000/= USD 20 |
TZS 2051: 2017 ISO 8968-4: 2016 | 2017 | Milk and milk products — Determination of nitrogen content — Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) Specifies a method for the direct and indirect determination of the protein nitrogen content of liquid, whole or skimmed milk. ICS: 67.100.10 |
11 | Tshs. 20,000/= USD 20 |
TZS 2050: 2017 ISO 11816-2: 2016 | 2017 | Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese Specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in cheese. This method is applicable to soft cheeses, semi-hard and hard cheeses prov ICS: 67.100.30 |
15 | Tshs. 20,000/= USD 20 |
TZS 2049: 2017 | 2017 | Goat and sheep feed supplements — Specification Specifies requirements, methods of sampling and test for goats and sheep feed supplements. It covers feeds for; kids and lambs, yearlings and mature goats and sheep. ICS: 65.120, |
10 | Tshs. 15,000/= USD 15 |
TZS 2048: 2017 | 2017 | Fish feeds — Specification Specifies requirements, sampling and test methods for fish feeds. It covers Tilapia and Catfish feeds. ICS: 65.120 |
11 | Tshs. 20,000/= USD 20 |
TZS 2047: 2017 | 2017 | Poultry feed premixes — Specification Specifies requirements, methods of sampling and test for poultry feed premixes used as a sole source of vitamins and trace elements for poultry. ICS: 65.120 |
5 | TZS 10,000/-USD 10 |
TZS 2046: 2017 | 2017 | Pig feed premixes — Specification Specifies requirements, methods of sampling and test for pig feed premixes used as animal feeds. ICS: 65.120, |
5 | TZS 10,000/-USD 10 |
TZS 2045: 2017 | 2017 | Dairy cattle premix — Specification Specifies requirements, methods of sampling and test for cattle feed premixes used in enrich cattle feeds. ICS: 65.120, |
4 | TZS 10,000/-USD 10 |
TZS 2044: 2017 ISO 5985: 2002 | 2017 | Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid Specifies two procedures for animal feeding stuffs for the determination of the ash which is insoluble in hydrochloric acid. The applicable procedure depends on the nature of the sample. a) ICS: 67.100 |
7 | Tshs. 15,000/= USD 15 |
TZS 2043-7: 2017- ISO 13061-7: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain Specifies a method for the determination of ultimate tensile stress of wood perpendicular to grain of small clear specimens in the radial and tangential directions by measuring the breaking ICS: 79.040, |
5 | TZS 10,000/-USD 10 |
TZS 2043-6: 2017- ISO 13061-6: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain Specifies a method for determining the ultimate tensile stress of wood parallel to grain on small clear specimens by measuring the breaking load applied statically along the longitudinal axi ICS: 79.040 |
5 | TZS 10,000/-USD 10 |
TZS 2043-2: 2017- ISO 13061-2: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests Specifies a method for determining the density of wood for physical and mechanical tests on small clear wood specimens. It may also be used to determine density of test specimens for other p ICS: 79.040, |
5 | TZS 10,000/-USD 10 |
TZS 2043-1: 2017- ISO 13061-1: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests Specifies oven-drying methods for determining the moisture content of wood for physical and mechanical tests on small clear wood specimens. ICS: 79.040, |
4 | TZS 10,000/-USD 10 |
TZS 2033: 2018 EAS 62-1: 2017 | 2018 | Fish handling and processing — Code of practice — Part 1: Fresh fish Provides guidelines for the handling and processing of fresh fish intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
TZS 2032: 2018 EAS 899: 2017 | 2018 | Tuna canned in oil — Specification Specifies requirements, sampling and test methods for tuna canned in oil intended for human consumption. ICS: 67.120.30 |
8 | Tshs. 15,000/= USD 15 |
TZS 2031: 2018 EAS 898: 2017 | 2018 | Processing and handling of smoked fish, smoke-flavoured fish, smoke–dried fish and smoked fish products — Code of practice Provides guidelines for processing, handling and storing of smoked fish, smoke-flavoured fish, smoke-dried fish and smoked fish products intended for human consumption. This code of practice ICS: 67.120.30 |
4 | TZS 10,000/-USD 10 |
TZS 2030: 2018 EAS 897: 2017 | 2018 | Frozen lobster tails — Specification Specifies requirements, sampling and test methods for frozen lobster tails of all the species of the genera Panulirus, Thunnus and Peurulus intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2029: 2018 EAS 896: 2017 | 2018 | Fried fish — Specification Specifies requirements, sampling and test methods for fried fish of all species, which may be whole or portions intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
TZS 2028: 2018 EAS 895: 2017 | 2018 | Fish protein concentrate — Specification Specifies requirements, sampling and test methods for fish protein concentrate intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2027: 2018 EAS 876: 2017 | 2018 | Smoked fish, smoke-flavoured and smoke-dried fish — Specification Specifies requirements, sampling and test methods for smoked fish, smoke flavoured fish and smoke dried fish intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2026: 2018 EAS 875: 2017 | 2018 | Quick frozen prawns or shrimps Specification Specifies requirements, sampling and test methods for quick frozen prawns or shrimps. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2025: 2018 EAS 874: 2017 | 2018 | Processing and handling of prawns or shrimps — Code of practice Prescribes guidelines for processing and handling of prawns or shrimps intended for human consumption. ICS: 67.120.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 2024: 2018 - EAS 873: 2017 | 2018 | Frozen tuna loins — Specification Specifies requirements, sampling and test methods for frozen tuna loins intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2023: 2018 EAS 872: 2017 | 2018 | Frozen octopus — Specification Specifies requirements, sampling and test methods for frozen octopus intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
TZS 2022: 2018 EAS 871: 2017 | 2018 | Fish sausages — Specification Specifies requirements, sampling and test methods for fish sausages intended for human consumption. ICS: 67.120.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 2021: 2018 - EAS 870: 2017 | 2018 | Crackers from marine and fresh water fish, crustacean and molluscan shellfish — Specification Specifies requirements, sampling and test for crackers prepared from marine and freshwater fish, crustacean and molluscan shellfish ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 2020-1-1: 2017 IEC 62680-1-1: 2015 | 2017 | Universal serial bus interfaces for data and power — Part 1-1: Common components — USB Battery Charging Specification, Revision 1.2 The battery charging working group is chartered with creating specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in ex ICS: 29.220; 33.120; 35.200 |
63 | TZS 70,000/-USD 70 |
TZS 2019-1-102: 2017 IEC 61196-1-102: 2005 | 2017 | Coaxial communication cables — Part 1-102: Electrical test methods — Test for insulation resistance of cable dielectric Applies to coaxial communication cables. It specifies test methods for determining the insulation resistance of coaxial cables ICS: 33.120.10 |
5 | TZS 10,000/-USD 10 |
TZS 2019-1-100: 2017 IEC 61196-1-100: 2015 | 2017 | Coaxial communication cables — Part 1-100: Electrical test methods — General requirements Gives the general requirements and condition for electrical tests to be performed on coaxial communication cabkes ICS: 33.120.10 |
9 | Tshs. 15,000/= USD 15 |
TZS 2019-1-101: 2017 IEC 61196-1-101: 2005 | 2017 | Coaxial communication cables — Part 1-101: Electrical test methods — Test for conductor d.c resistance of cable Applies to coaxial communication cables. It specifies test methods for determining the conductor d. c resistance of coaxial cables. ICS: 33.120.10 |
60 | Tshs 65,000/= USD 65 |
TZS 2262:2018 | 2018 | Glass cleaner, liquid- Specification Prescribes the requirements, methods of sampling and test for glass cleaner, liquid. This Tanzania Standard is applicable for the glass cleaner liquid intended primarily for use on wind shi ICS:71.100.40 |
8 | Tshs. 15,000/= USD 15 |
TZS 2288: 2018- EAS 321: 2018 | 2018 | Edible fats and oils – Specification Specifies the requirements, sampling and tests methods for edible fats and oils intended for human consumption ICS: 67.200.10 |
4 | TZS 10,000/-USD 10 |
TZS 2287: 2018- ISO 21103: 2014 | 2018 | Adventure tourism — Information for participants Specifies minimum requirements for information to be provided to participants before, during and after adventure tourism activities. ICS: 03.200 |
6 | Tshs. 15,000/= USD 15 |
TZS 2289:2018-EAS 879:2018 | 2018 | Aluminium cans for beverages ― Specification Specifies requirements and test methods for aluminium cans used as primary pack for packaging of beverages. ICS 55.120 |
9 | Tshs. 15,000/= USD 15 |
TZS 2290:2018-EAS 880:2018 | 2018 | Waxed paper for packaging of confectionery ― Specification Specifies the requirements and test methods for waxed paper for packaging of confectionery. ICS 55.120 |
22 | Tshs. 30,000/= USD 30 |
TZS 2291:2018-EAS 881:2018 | 2018 | Packaging ― Flexible tubes ― Determination of the air tightness of closures ― Test method Specifies a test method for air tightness of the closures for flexible tubes. It is applicable to flexible single-layer metal or plastics tubes, and multilayer or laminated tubes, used for ICS 55.120 |
3 | TZS 10,000/-USD 10 |
TZS 2292:2018-EAS 882:2018 | 2018 | Packaging ― Flexible carrier bags ― Specification Specifies requirements, sampling and test methods for flexible carrier bags made of paper and any other flexible material. This standard does not apply to carrier bags made from thermoplas ICS 55.120, |
11 | Tshs. 20,000/= USD 20 |
TZS 2293:2018-EAS 884:2018 | 2018 | Packaging ― Flexible tubes ― Determination of puncture resistance ― Test method Specifies a test method for determining the puncture resistance of flexible packaging materials. ICS 55.120 |
5 | TZS 10,000/-USD 10 |
TZS 2294:2018-EAS 886:2018 | 2018 | Packaging ― Flexible packaging material ― Determination of residual solvents by headspace gas chromatography ― Test method Prescribes a method for the quantitative determination of residual solvents in flexible packaging materials by headspace gas chromatography ICS 55.120 |
6 | Tshs. 15,000/= USD 15 |
TZS 2295:2018-EAS 891:2018 | 2018 | Plastic crates ― Specification Specifies the requirements and test methods for rigid plastic crates for holding and transportation of beverages, fruits, vegetables, bread and milk among others. ICS 55.120 |
5 | TZS 10,000/-USD 10 |
TZS 2132: 2018- EAS 863: 2017 | 2018 | Paper and board — Cut-size for general purpose — Specification Specifies the requirements, sampling and test methods for cut-size paper and board for general use. ICS: 85.080.01 |
4 | TSHS 10,000/= USD 10 |
TZS 2131: 2018- EAS 862: 2017 | 2018 | Facial tissue paper — Specification Specifies the requirements, sampling and test methods for facial tissue paper in sheet form for facial hygiene ICS: 85.080.20, |
7 | TSHS 15,000/= USD 15 |
TZS 2130: 2018- EAS 859: 2017 | 2018 | Paper bags — Specification Specifies requirements, sampling and test methods for gusseted paper bags that have rectangular bottoms and are intended primarily for packaging and/or carrying items. ICS: 85.080.01, |
5 | TSHS 10,000/= USD 10 |
TZS 2129: 2018- EAS 858: 2017 | 2018 | Base paper for carbon paper — Specification Specifies requirements, sampling and test methods for base paper for carbon paper with their respective grades ICS: 85.080.01 |
5 | TSHS 10,000/= USD 10 |
TZS 2128: 2018- EAS 857: 2017 | 2018 | Carbon paper — Specification Specifies requirements, sampling and test methods for carbon paper. It covers carbon paper for typewriting and handwriting with their respective grades. ICS: 85.080.01, |
11 | TSHS 20,000/= USD 20 |
TZS 2127-28: 2018- EAS 847-28: 2017 | 2018 | Cosmetics — Analytical methods — Part 28: Determination of free caustic alkali Prescribes the procedure for the determination of free caustic alkali in cosmetics. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
TZS 2127-27: 2018 EAS 847-27: 2017 | 2018 | Cosmetics — Analytical methods — Part 27: Determination of total fatty substance by gravimetric method Prescribes the procedure for the gravimetric determination of total fatty substance for cosmetics and oils in the cosmetic industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-26: 2018 EAS 847-26: 2017 | 2018 | Cosmetics — Analytical methods — Part 26: Determination of boric acid Prescribes the procedure for the determination of boric acid in powders ICS: 71.100.70 |
1 | TSHS 10,000/= USD 10 |
TZS 2127-25: 2018- EAS 847-25: 2017 | 2018 | Cosmetics — Analytical methods — Part 25: Determination of fineness Prescribes the procedure for the determination of fineness in powders. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-24: 2018- EAS 847-24: 2017 | 2018 | Cosmetics — Analytical methods — Part 24: Determination of matter insoluble in boiling water Prescribes the procedure for the determination of matter insoluble in boiling water in powders. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-23: 2018- EAS 847-23: 2017 | 2018 | Cosmetics — Analytical methods — Part 23: Test for absence of grit in powders Prescribes the procedure for the determination of absence of grit in powders. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
TZS 2127-22: 2018 EAS 847-22: 2017 | 2018 | Cosmetics — Analytical methods — Part 22: Determination of sulphur and sulphides in oils Prescribes the procedure for the determination of sulphur and sulphides in oils. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
TZS 2127-21: 2018- EAS 847-21: 2017 | 2018 | Cosmetics — Analytical methods — Part 21: Determination of free acid in oils Prescribes the procedure for the determination of free acid in cosmetics and oils for cosmetic industry. ICS: 71.100.70 |
2 | TSHS 10,000/= USD 10 |
TZS 2127-18: 2018-EAS 847-18: 2017 | 2018 | Cosmetics — Analytical methods — Part 18: Determination of thermal stability Cosmetics — Analytical methods — Part 18: Determination of thermal CS: 71.100.70 |
1 | TSHS 10,000/= USD 10 |
TZS 2127-17: 2018- EAS 847-17: 2017 | 2018 | Cosmetics — Analytical methods — Part 17: Determination of pH Prescribes the procedures for the determination of pH in cosmetics and oils for cosmetics industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-16: 2018- EAS 847-16: 2017 | 2018 | Cosmetics — Analytical methods — Part 16: Determination of lead, mercury and arsenic content Prescribes methods for the determination of lead, mercury and arsenic content in cosmetics and oils for cosmetic industry ICS: 71.100.70, |
10 | TSHS 15,000/= USD 15 |
TZS 2127-15: 2018- EAS 847-15: 2017 | 2018 | Cosmetics — Analytical methods — Part 15: Determination of ash content Prescribes the test method for the determination of ash content in cosmetics and oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-14: 2018- EAS 847-14: 2017 | 2018 | Cosmetics — Analytical methods — Part 14: Determination of Polenske value Prescribes the test method for the determination of Polenske value ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
TZS 2127-13: 2018- EAS 847-13: 2017 | 2018 | Cosmetics — Analytical methods — Part 13: Determination of rancidity Prescribes the test method for the determination of rancidity ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-12: 2018- EAS 847-12: 2017 | 2018 | Cosmetics — Analytical methods — Part 12: Determination of flash point by Pensky-Martens closed cap tester Prescribes the test method for the determination of flash point by Pensky-Martens closed cap tester in oils for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-11: 2018- EAS 847-11: 2017 | 2018 | Cosmetics — Analytical methods — Part 11: Determination of allyl isothiocyanate Prescribes the test method for the determination of allyl isothiocyanate in oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-10: 2018- EAS 847-10: 2017 | 2018 | Cosmetics — Analytical methods — Part 10: Determination of acetyl value and hydroxyl value Prescribes the test methods for the determination of acetyl value and hydroxyl value in oils for cosmetic industry ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
TZS 2127-9: 2018- EAS 847-9: 2017 | 2018 | Cosmetics — Analytical methods — Part 9: Determination of colour Prescribes the test method for the determination of colour in oils for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-8: 2018- EAS 847-8: 2017 | 2018 | Cosmetics — Analytical methods — Part 8: Titre test Prescribes the test method for the determination of the solidification (titre) point of fatty acids for oils in the cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-7: 2018- EAS 847-7: 2017 | 2018 | Cosmetics — Analytical methods — Part 7: Determination of specific gravity Prescribes the test methods for the determination of specific gravity in oils for cosmetic industry. ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
TZS 2127-6: 2018- EAS 847-6: 2017 | 2018 | Cosmetics — Analytical methods — Part 6: Determination of melting point. Prescribes the test methods for the determination of melting point of oils in the cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-5: 2018- EAS 847-5: 2017 | 2018 | Cosmetics — Analytical methods — Part 5: Determination of unsaponifiable matter Prescribes the test method for the determination of unsaponifiable matter. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-4: 2018- EAS 847-4: 2017 | 2018 | Cosmetics — Analytical methods — Part 4: Determination of acid value and free fatty acids Prescribes the test method for the determination of acid value and free fatty acids in oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
TZS 2127-3: 2018- EAS 847-3: 2017 | 2018 | Cosmetics — Analytical methods — Part 3: Determination of insoluble impurities Prescribes the test method for the determination of insoluble impurities in oils for cosmetic industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2127-2: 2018- EAS 847-2: 2017 | 2018 | Cosmetics — Analytical methods — Part 2: Determination of moisture content and volatile matter content Prescribes the test methods for the determination of moisture content and volatile matter content in oils for cosmetic industry. ICS: 71.100.70, |
9 | TSHS 15,000/= USD 15 |
TZS 2127-1: 2018- EAS 847-1: 2017 | 2018 | Cosmetics — Analytical methods — Part 1: Glossary of terms Defines terms used in the test methods for oils for cosmetic industry. This standard does not deal with the specifications of the oils or fats. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 2126: 2018- EAS 846: 2017 | 2018 | Glossary of terms relating to the cosmetic industry Defines the terms relating to the cosmetic industry. ICS: 71.100.70, |
10 | TSHS 15,000/= USD 15 |
TZS 2125: 2018- EAS 844: 2017 | 2018 | Aryl di-amine-based liquid oxidation hair dyes — Specification Specifies requirements, sampling and test methods for permanent liquid oxidation hair dyes which are aryl di-amine based. This standard does not apply to powder hair dyes, plant-based hair d ICS: 71.100.70 |
10 | TSHS 15,000/= USD 15 |
TZS 2124: 2018- EAS 840: 2017 | 2018 | Shaving cream — Specification specifies the requirements, sampling and test methods for shaving creams. This standard covers two types of shaving cream: • Type 1; and • Type 2. ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
TZS 2123: 2018- EAS 837: 2017 | 2018 | Avocado oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for avocado oil for use as a raw material in the cosmetic industry. This standard does not apply to packaged avocado oil, ready for use ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
TZS 2122-1: 2018- EAS 835-1: 2017 | 2018 | Bath preparations — Part 1: Synthetic detergent-based foam baths and shower gels — Specification Specifies the requirements, sampling and test methods for synthetic foam baths and shower gels. ICS: 71.100.70 |
5 | TSHS 10,000/= USD 10 |
TZS 2121: 2018- EAS 86: 2017 | 2018 | Sesame (simsim) oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for sesame oil for cosmetic industry. ICS: 71.100.70, |
4 | TSHS 10,000/= USD 10 |
TZS 2120: 2018- EAS 65: 2017 | 2018 | Coconut oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for coconut oil for cosmetic industry. ICS: 71.100.70, |
4 | TSHS 10,000/= USD 10 |
TZS 2127-13: 2018- EAS 847-13: 2017 | 2018 | Cosmetics — Analytical methods — Part 13: Determination of rancidity Prescribes the test method for the determination of rancidity ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
TZS 1430: 2017 (2nd Ed) | 2017 | Tea Masala - Specification Prescribes the requirements and the methods of sampling and test for tea masala which is used as a flavouring material in the preparation of tea ICS 67.220.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1429: 2012 | 2012 | Paratha (chapatti) dough – Specification Prescribes essential requirements for uncooked Paratha dough intended for making flat unleavened product. The standard applies to kneaded flattened pliable flour discs, prepared from wheat f ICS: 67.060 |
6 | Tshs. 15,000/= USD 15 |
TZS 1428:2011 (1st Ed) | 2011 | Setting lotion – Specification Specifies the requirements, methods of sampling and test for setting lotions ICS 71.100.70 |
10 | Tshs. 15,000/= USD 15 |
TZS 1427:2011 | 2011 | Lanolin, anhydrous for cosmetics industry Prescribes the requirements and methods of sampling and test for anhydrous lanolin for cosmetic industry ICS: 71.100.70 |
7 | Tshs. 15,000/= USD 15 |
TZS 1426: 2011 (1st Ed) | 2011 | Edible ices (lollies) – Specification Specifies requirements, methods of sampling and test for edible ices (lollies) ICS 67.100.40 |
7 | Tshs. 15,000/= USD 15 |
TZS 1425: 2011 (1st Ed) | 2011 | Textile - Sewing Threads Specification - Sewing threads made wholly or partly from synthetic fibres Specifies minimum requirements for industrial and domestic sewing thread containing synthetic material. It deals with industrial and domestic sewing threads made from different substratesand ICS 59.080.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1424: 2011 (1st Ed) | 2011 | Textiles - Woven upholstery fabrics -Plain, tufted or flocked –Specifications Covers the performance specification required for Plain woven upholstery fabrics, Tufted, or flocked as used in the manufacture of indoor furniture. The requirements apply to both the warp a ICS 59.080.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 1423:2011 | 2011 | Textiles – Knitted upholstery fabrics for indoor furniture – Specifications Covers the performance specification required for a knitted upholstery fabric, as used in the manufacture of indoor furniture for general domestic use ICS. 59.080 |
8 | Tshs. 15,000/= USD 15 |
TZS 1422: 2011 | 2011 | Textiles-Woven, non woven, knitted and lace household curtain and drapery fabrics –Specifications Covers a wide range of curtaining and drapery fabric materials produced from natural and synthetic fibres with the exception of steel and glass fibres ICS 59.080 |
11 | Tshs. 20,000/= USD 20 |
TZS 1421: 2011 (1st Ed) | 2011 | Textile - Specification for cotton denim fabrics Covers performance requirements for a 100% cotton woven denim fabrics, prior to the manufacture of jeans, casual apparel, work clothing and outerwear. It is not applicable to woven denim fab ICS 59.080.30 |
9 | Tshs. 15,000/= USD 15 |
TZS 1420:2011 | 2011 | Textile – Stitch types for garment manufacturing Describes, classifies, designates and illustrates various kinds of stitch types used in sewing either by hand or machine ICS. 59.080.99 |
15 | Tshs. 20,000/= USD 20 |
TZS 1419 (Part 2): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions – Part 2: Safety requirements and test methods Specifies safety requirements and test methods for plastic chairs and tables for general educational purposes in educational institutions. It does not apply to computer related and special p ICS 97.140 |
21 | Tshs 30,000/= USD 30 |
TZS 1419 (Part 1): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions - Part 1: Functional dimensions Specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as ICS 97.140 |
26 | Tshs 35,000/= USD 35 |
TZS 1418: 2011 (1st Ed) | 2011 | Agricultural equipment – Soil tillage and equipment – Terminology Includes the definitions used in the general classification, design, construction, operation and performance of tillage equipment and soil-tool relationships ICS 65.060.20 |
17 | Tshs 25,000/= USD 25 |
TZS 1417: 2011 (1st Ed) | 2011 | Agricultural equipment – Walking type agricultural tractors – Specification Specifies the requirements for the construction and operation of walking type agricultural powered machinery for land tilling, weeding, ploughing, grass cutting and transplanting. It covers ICS: 65.060.10 |
13 | Tshs. 20,000/= USD 20 |
TZS 1416: 2011 (1st Ed) | 2011 | Agricultural equipment – disc plough – Specification Specifies the requirements for disc plough used for four-wheel tractor ICS 65.060.20 |
10 | Tshs 15,000/= USD 15 |
TZS 2175: 2018- ISO 11723: 2016 | 2018 | Solid mineral fuels — Determination of arsenic and selenium — Eschka’s mixture and hydride generation method Specifies a method using Eschka’s mixture during ashing, extraction of the ash residue with acid, and hydride generation atomic absorption spectrometry or hydride generation atomic fluoresce ICS: 73.040, |
6 | TSHS 15,000/= USD 15 |
TZS 2174: 2018- ISO 1953: 2015 | 2018 | Hard coal — Size analysis by sieving Specifies reference methods for the size analysis of coal by manual sieving (wet or dry), using test sieves of aperture sizes between 125 mm and 45 μm. A guide to sampling is given in Annex ICS: 73.040, |
13 | TSHS 20,000/= USD 20 |
TZS 1415: 2011 (1st Ed) | 2011 | Agricultural equipment – Four wheeled tractors – Specifications Specifies the requirements for the construction and operation of agricultural four - wheeled tractor. This is applicable to both two - wheel drive and four-wheel drive tractors with a net po ICS 060.10 |
27 | Tshs 35,000/= USD 35 |
TZS 1413:2011 | 2011 | Building hardware – Padlocks and padlock fittings requirements and test methods Specifies performance requirements and describes test methods for strength, security, function and corrosion of padlocks and padlock fittings used in building applications, but excluding cab ICS. 91.190 |
23 | Tshs 30,000/= USD 30 |
TZS 1412: 2011 (1st Ed) | 2011 | Fat spreads and blended fat Spreads –Specification Prescribes the requirements and methods of sampling and tests for fat spreads and blended fat spreads. Fat spreads derived exclusively from milk products and/or milk products to which only o ICS 67.200.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1411: 2014 | 2014 | Spring mattress — Specification Specifies terms, definition, requirements and methods for sampling and testing spring mattresses for general usage. ICS: 97.140 |
12 | Tshs. 20,000/= USD 20 |
TZS 1410: 2011 (1st Ed) | 2011 | Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides – specification Describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods. Gives the information on its use in water treatment ICS 67.200.10 |
11 | Tshs. 20,000/= USD 20 |
TZS 1409:2011 (1stEd) | 2011 | Polyamines for treatment of water intended for human consumption -Specification Describes the characteristics of polyamines and specifies the requirements and the corresponding test methods. Gives information on its use in water treatment ICS 71.100.80 |
14 | Tshs 20,000/= USD 20 |
TZS 1408: 2011 (1stEd) | 2011 | Cationic polyacrylamides for treatment of water intended for human consumption – Specification Describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods ICS: 71.100.80 |
11 | Tshs. 20,000/= USD 20 |
TZS 1402-1: 2018 – ISO 8041-1: 2017 | 2018 | Human response to vibration — measuring instrument — Part 1: General purpose vibration meters Specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requ ICS: 13.160 |
106 | Tshs.110,000/= USD 110 |
TZS 1401: 2018 – ISO 2041:2009 | 2018 | Mechanical vibration, shock and conditional monitoring — Vocabulary Defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring ICS: 17.160 |
46 | Tshs 55,000/= USD 55 |
TZS 1400: 2018 – ISO 5349-2: 2001 | 2018 | Mechanical vibration — Measurement and evaluation of human exposure to hand transmitted vibration — Practical guidance for measurement at work place Provides guidelines for the measurement and evaluation of hand-transmitted vibration at the workplace in accordance with ISO 5349-1 ICS: 13.160 |
39 | Tshs 45,000/= USD 45 |
TZS 1399: 2018 – ISO 5349-1: 2001 | 2018 | Mechanical vibration — Measurementand evaluation of human exposure tohand-transmitted vibration — Generalrequirements Specifies general requirements for measuring and reporting hand transmitted vibrationexposure in three orthogonal axes. It defines a frequency weighting and band-limiting filters to allow un ICS: 13.160 |
24 | Tshs 30,000/= USD 30 |
TZS 1398-2: 2018 – ISO 2631-2: 2003 | 2018 | Mechanical vibration and shock evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz). Concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants. It specifies a method for measurement and evaluation, compr ICS: 13.160 |
11 | Tshs. 15,000/= USD 15 |
TZS 2160: 2018 - ISO 14045: 2012 | 2018 | Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidance Describes the principles, requirements and guidelines for eco-efficiency assessment for product systems, ICS: 13.020.10, |
38 | TSHS 45,000/= USD 45 |
TZS 1398-1: 2018 – ISO 2631-1: 1997 | 2018 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements Defines methods for the measurement of periodic, random and transient whole-body vibration. It indicates the principal factors that combine to determine the degree to which a vibration expos ICS: 13.160 |
31 | Tshs 40,000/= USD 40 |
TZS 2159: 2018 - ISO 14044: 2006 | 2018 | Environmental management — Life cycle assessment — Requirement and guidelines Specifies requirements and provides guidelines for life cycle assessment. ICS: 13.020.10 |
46 | TSHS 55,000/= USD 55 |
TZS 1395: 2011 (1st Ed)-ISO 5545: 2008 | 2011 | Rennet caseins and caseinates –Determination of ash Specifies a reference method for the determination of the ash of caseins obtained by rennet precipitation and of caseinates, with the exception of ammonium caseinate ICS 67.100.99 |
9 | Tshs. 15,000/= USD 15 |
TZS 2173: 2018- ISO 334: 2013 | 2018 | Solid mineral fuels — Determination of total sulfur — Eschka method Specifies a reference method for determining the total sulfur content of hard coal, brown coals and lignites, and coke by the Eschka method. ICS: 73.040 |
7 | TSHS 15,000/= USD 15 |
TZS 2172: 2018- ISO 11724: 2016 | 2018 | Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash. Specifies a method for the determination of total fluorine in coal, coke and fly ash. ICS: 73.040 |
11 | TSHS 20,000/= USD 20 |
TZS 1394: 2011 (1st Ed)-ISO 5544: 2008 | 2011 | Caseins -Determination of “fixed ash Specifies a reference method for the determination of the “fixed ash” of caseins, as a percentage by mass, obtained by acid precipitation or lactic fermentation, of ammonium caseinates, of t ICS 67.100.99 |
9 | Tshs. 15,000/= USD 15 |
TZS 1393: 2011 (1st Ed)- ISO 2450: 2008 | 2011 | Cream – Determination of fat content by Gravimetric method Specifies the reference method for the determination of the fat content of raw, processed and sour cream in which no appreciable separation or breakdown of fat, due to lipolysis, has occurre ICS 67.100.99 |
19 | Tshs 25,000/= USD 25 |
TZS 2171: 2018- ISO 15237: 2016 | 2018 | Solid mineral fuels — Determination of total mercury content of coal Specifies a procedure for the determination of the total mercury content of coal. ICS: 73.040, |
5 | TSHS 10,000/= USD 10 |
TZS 2169: 2018- ISO 10008: 2013 | 2018 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions Provides guidance for planning, designing, developing, implementing, maintaining and improving an effective and efficient business-to-consumer electronic commerce transaction (B2C ECT) syste ICS: 03.120.10, |
29 | TSHS 35,000/= USD 35 |
TZS 2165: 2018- ISO 31000: 2009 | 2018 | Risk management — Principles and guidelines Provides principles and generic guidelines on risk management. This International Standard can be used by any public, private or community enterprise, association, group or individual. Ther ICS: 03.100.01 |
24 | TSHS 30,000/= USD 30 |
TZS 2164: 2018- ISO 18788: 2015 | 2018 | Management system for private security operations — Requirements with guidance for use Provides a framework for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the management of security operations. ICS: 03.080.20, |
98 | TSHS 105,000/= USD 105 |
TZS 1392 (Part 7): 2012 -ISO 457:1983 | 2012 | Analysis of soaps Part 7: Determination of chloride content- titrimetric method Specifies a method for determining the chloride content of commercial soaps excluding compounded products, this method is applicable to soaps having a chloride content, expressed as sodium c ICS 71.100.40 |
2 | TZS 10,000/-USD 10 |
TZS 2162: 2017 - ISO 17624: 2004 | 2017 | Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens Deals with the effectiveness of acoustical screens. It specifies the acoustical andoperational requirements to be agreed upon between the supplier or manufacturer and the user of acousticals ICS: 13.140, |
14 | TSHS 20,000/= USD 20 |
TZS 1391:2011 (1st Ed) | 2011 | Refined mustard oil – Specification Prescribes the requirements, methods of sampling and test for refined mustard oil ICS 67.100.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1390 (Part 3): 2011 (1st Ed)-ISO 8262 - 3: 2005 | 2011 | Milk products and milk based foods –Determination of fat content by Weibull-Berntrop gravimetric method Part 3: Special cases Specifies a reference method for the determination of the fat content of milk- based and of liquid, concentrated or dried milk products to which the Röse - Gottllieb method is not applicable ICS 67.100.01 |
15 | Tshs. 20,000/= USD 20 |
TZS 2100-7: 2017- ISO 22476-7: 2012 | 2017 | Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test specifies the equipment requirements, execution of and reporting on borehole jack tests. NOTE This part of ISO 22476 fulfils the requirements for borehole jack tests as part of geotechnical ICS: 93.020.00 |
23 | TSHS 30,000/= USD 30 |
TZS 1390 (Part 2): 2011 (1st Ed) - ISO 8262 - 2: 2005 | 2011 | Milk products and Milk based foods –Determination of fat content by Weibull-Berntrop gravimetric method Part 2: Edible ices and ice-mixes Specifies a reference method for the determination of the fat content of edible ices and ice-mixes to which the Röse-Gottlieb method is not applicable (i.e. those products containing high le ICS 67.100.01 |
15 | Tshs. 20,000/= USD 20 |
TZS 2101: 2018- EAS 91: 2017 Passion fruits — Specification | 2018 | Passion fruits — Specification Specifies requirement, sampling and test methods for commercial varieties of passion fruits from the species golden passion fruit/sweet granadilla (Passiflora ligularis Juss), purple passion ICS: 67.080.10, |
7 | TSHS 15,000/= USD 15 |
TZS 2103: 2018 - ISO 12242: 2012 | 2018 | Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid Specifies requirements and recommendations for ultrasonic liquid flowmeters, which utilize the transit time of ultrasonic signals to measure the flow of single-phase homogenous liquids in cl ICS: 17.020.10 |
69 | TSHS 75,000/= USD 75 |
TZS 1390 (Part 1): 2011 (1st Ed)-ISO 8262 - 1:2005 | 2011 | Milk products and milk-based foods –Determination of fat content by the Weibull-Berntrop gravimetric method Part 1: Infants foods Specifies the reference method for the determination of the fat content of infant foods to which the Röse-Gottlieb method is not applicable [i.e. those milk-based and other types of infant f ICS 67.100.01 |
14 | Tshs. 20,000/= USD 20 |
TZS 1389: 2011 (1st Ed)- ISO 17678: 2010 | 2011 | Milk and Milk products – Determination of milk fat purity by gas chromatographic analysis of triglycerides Specifies a reference method for the determination of milk fat purity using gas chromatographic analysis of triglycerides. Basically, the method applies to bulk milk, or products made thereo ICS 67.100.10 |
27 | Tshs 35,000/= USD 35 |
TZS 1378:2011 (1st Ed) | 2011 | Electromagnetic compatibility (EMC) – Limits for harmonic current emissions for equipment with input current > 16 A per phase Deals with the emission of disturbances due to harmonics, applicable to both electrical and electronic equipment with a rated input current exceeding 16 A per phase and intended to be connec ICS: 17.220.01 |
10 | Tshs. 15,000/= USD 15 |
TZS 1377:2011 (1st Ed) | 2011 | Electromagnetic compatibility (EMC) – Limits for harmonic current emissions for equipment with input current ≤ 16 A per phase Deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which may be produced by equipment tes ICS: 17.220.01 |
29 | Tshs 35,000/= USD 35 |
TZS 1376:2011 (1st Ed) | 2011 | Electromagnetic compatibility (EMC) – Limits for voltage change, voltage fluctuation and flickers in public low voltage supply system for equipment with rated current ≤ 75 A per phase and sub Concerned with the emission of voltage changes, voltage fluctuations and flicker produced by equipment and impressed on the public low -voltage supply system. It specifies the limits of vo ICS: 17.220.01 |
12 | Tshs 20,000/= USD 20 |
TZS 1375:2011 (1st Ed) | 2011 | Electromagnetic Compatibility (EMC) – Limits for voltage change, voltage fluctuation and flickers in public low voltage supply system for equipment with rated current ≤ 16 A per phase and not Concerned with the limitation of voltage fluctuations and flicker impressed on the public low -voltage system. It specifies limits of voltage changes which may be produced by equipment teste ICS: 17.220.01 |
26 | Tshs 35,000/= USD 35 |
TZS 1374:2011 (1st Ed) | 2011 | Power quality – Quality of service and reliability Outlines various service activities and the minimum standards for measuring the quality of service provided to customers by electricity utilities. It also introduces various quality-of-serv ICS: 29.240.01 |
41 | Tshs 50,000/= USD 50 |
TZS 1373:2011 (1st Ed) | 2011 | Power quality – Quality of supply compatibility levels, limits and assessment methods for the quality of electricity supplied to end customers. These characteristics are subject to variations during the normal operation of ICS: 29.240.01 |
30 | Tshs 30,000/=, USD 30 |
TZS 1367:2014(1st Ed) -EAS 304:2013 | 2014 | Edible corn oil — Specification Specifies the requirements and methods of sampling and test for edible corn oil derived from the embryo (endosperm) of maize or corn (Zea mays L.). It does not apply to corn oil intended for ICS: 67.200.10 |
7 | Tshs. 15,000/= USD 15 |
TZS1366-2:2011- ISO/TR15489-2:2001 | 2011 | Information and documentation – Records management – Part 2: Guidelines This part of ISO 15489 is an implementation guide to ISO for use by record management professionals and those charged with managing records in their organization. It provides one methodology ICS 01.140.20 |
39 | Tshs 45,000/= USD 45 |
TZS 2104: 2018 - ISO 9151: 1995 | 2018 | Protective clothing against heat and flame — Determination of heat transmission on exposure to flame Specifies a method for comparing the heat transmission through materials or material assemblies used in protective clothing. Materials are ranked by calculation of a heat transfer index, whi ICS : 13.340.10 |
9 | TSHS 15,000/= USD 15 |
TZS 1355: 2012 (1st Ed) | 2012 | Artificially sweetened flavoured drink in solid form- specification Specifies requirements, methods of test and sampling for artificially sweetened flavoured drink in solid form intended for direct human consumption ICS 67.050 |
8 | Tshs. 15,000/= USD 15 |
TZS 1354:2010 | 2010 | Textile – Masai shuka -specification Describes the constructional details and other particulars of Masai shuka made from dyed acrylic yarns ICS: 59.080.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1352: 2017 (1st Ed) | 2017 | Food seasoning mixture- specification Specifies requirements, methods of test and sampling for food seasoning mixture. The standard does not cover dehydrated and frozen soups and broths ICS 67.220.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1351: 2010 (1st Ed) | 2010 | Flavoured drink in solid form — Specification Specifies requirements, methods of test and sampling for flavoured drink in solid form intended for direct human consumption as a ready to drink beverage after reconstitution with potable wa ICS 67.160.20 |
4 | TZS 10,000/-USD 10 |
TZS 1350: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs - insulated containers for domestic use - Specification for insulated bags and boxes Specifies the requirement for portable domestic food and / or drinks insulated containers such as boxes, chests and bags, intended to contain generally wrapped or packed food and/ or dinks i ICS 55.160 |
8 | Tshs. 15,000/= USD 15 |
TZS 1348: 2010 (1st Ed) | 2010 | Small power distribution units (ready boards) for single - phase 230V service connections - Requirements Specifies requirements for distribution boxes that are ready-wired with socket-outlets, with or without a permanently wired luminaire. The boxes are intended for single-phase 230 V service c ICS: 29.130.99 |
22 | Tshs 30,000/= USD 30 |
TZS 1347: 2009 | 2009 | Preservative-treated timber Specifies treatment requirements for preservative-treated timber and timber product that have a predicted service life at various levels of preservative treatment which are considered to be ICS: 67.200.10 |
47 | Tshs 55,000/= USD 55 |
TZS 1346:2017 -ISO 5127:2001 | 2017 | Information and documentation – Vocabulary It presents terms and definitions of selected concepts relevant to the field and identifies relations between the entries ICS: 01.040.01 |
152 | Tshs 160,000/= USD 160 |
TZS 1336: 2010 (1st Ed)- ISO 663: 2007 | 2010 | Animal and vegetable fats and oils - Determination of insoluble impurities content Specifies a method for the determination of the insoluble impurities content of animal and vegetable fats and oils ICS: 67.200.10 |
9 | Tshs. 15,000/= USD 15 |
TZS 1335: 2017 (1st Ed) -ISO 8294: 1994 | 2017 | Animal and vegetable fats and oils - Determination of copper, iron and nickel content - Graphite furnace atomic absorption method Specifies a method for the determination of trace amounts of copper, Iron and nickel in animal and vegetable fats and oils, referred to hereinafter as fats ICS: 67.200.10 |
8 | Tshs. 15,000/= USD 15 |
TZS 1334: 2010 (1st Ed) -ISO: 356: 1996 | 2010 | Essential Oils - Preparation of Test Sample Gives general guidance for the preparation of samples of essential oils submitted to a laboratory for analysis ICS: 71.100.60 |
4 | TZS 10,000/-USD 10 |
TZS 1333: 2017 (2nd Ed)- ISO: 6321: 2002 | 2017 | Animal and vegetable fats and oils- Determination of melting point in open capillary tubes (slip point) Specifies two methods for the determination of the melting point in open capillary tubes, commonly known as the slip point, of animal and vegetable fats and oils (referred to as fats hereina ICS: 67.200.10 |
14 | Tshs. 20,000/= USD 20 |
TZS 1332:2010 (1st Ed) -ISO 3596: 2000 | 2010 | Animal and vegetable fat and oils – Determination of unsaponifiable mater – Method using diethyl ether extraction Specifies a method using diethyl ether extraction for the determination of the unsaponifiable matter content of animal and vegetable fats and oils ICS: 67.200.10 |
11 | Tshs. 15,000/= USD 15 |
TZS 1331 (Part 2): 2017 (2nd Ed) -ISO 660:2009 | 2017 | Animal and vegetable fats and oils – determination of acid value and acidity Specifies three methods (two titrimetric and one potentiometric) for the determination of the acidity in animal and vegetable fats and oils hereinafter referred to as fats. The acidity is ex ICS: 67.200.10 |
12 | Tshs. 20,000/= USD 20 |
TZS 1330:2017 (1st Ed)- ISO 15305:1998 | 2017 | Animal and vegetable fats and oils - determination of lovibondcolour Specifies a method for the determination of the Lovibondcolour of the lovibondcolour of animal and vegetablefats and oils ICS 67.200.10 |
8 | Tshs 15,000/= USD 15 |
TZS 1329: 2010 (1st Ed) -ISO 6320: 2000 | 2010 | Animal and vegetable fats and oils - Determination of refractive index Specifies a method for the determination of the refractive index of animal and vegetable fats and oils ICS: 67.200.10 |
9 | Tshs 15,000/= USD 15 |
TZS 1328: 2017 (1st Ed) -ISO 279: 1998 | 2017 | Essential oils - Determination of relative density at 20°C – Reference method Specifies the reference method for the determination of the relative density of essential oils at 20 °C ICS: 67.200.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1327: 2017 (2nd Ed)- ISO 3961: 2013 | 2017 | Animal and vegetable fats and oils- Determination of iodine value Specifies a reference method for the determination of the iodine value (IV) of animal and vegetable fats and oils hereinafter referred to as fats ICS: 67.200.10 |
10 | Tshs 15,000/= USD 15 |
TZS 1326: 2010 (1st Ed) -ISO 662: 1998 | 2010 | Animal and vegetable fats and oils - Determination of moisture and volatile matter content Specifies two methods for the determination, by drying, of the moisture and volatile matter content of animal or vegetable fats and oils ICS 67.200.10 |
9 | Tshs. 15,000/= USD 15 |
TZS 1325: 2010 (1st Ed)- ISO 3657: 2002 | 2010 | Animal and Vegetable fats and oils - Determination of specification value Specifies a method for the determination of the saponification value of animal and vegetable fats and oils. The saponification value is a measure of the free and esterified acids present in ICS 67.200.10 |
9 | Tshs. 15,000/= USD 15 |
TZS 1324:2010 (1st Ed)- ISO 3960:2007 | 2010 | Animal and vegetable fats and oils - Determination of peroxide value-Iodometric (visual) end point. Specifies a method for the iodometric determination of the peroxide value of animal and vegetable fats and oils with a visual endpoint detection. The peroxide value is a measure of the amoun ICS: 67.200.10 |
13 | Tshs. 20,000/= USD 20 |
TZS 1323:2017 (2nd Ed) -ISO 661:2003 | 2017 | Animal and vegetable fats and oils - Preparation of test sample Specifies procedures for the preparation of a test sample from a laboratory sample of animal or vegetable fats and oils for the purpose of analysis ICS:67.200.10 |
5 | TZS 10,000/-USD 10 |
TZS 1322:2010 (1st Ed) | 2010 | Fats and Oils - Sampling and test methods - Purity test Prescribes methods of sampling and purity tests for oils and fats. The standard also covers test methods for contaminants such as soap content. ICS 67.200.20 |
18 | Tshs. 25,000/= USD25 |
TZS 1321:2017 (2nd Ed)- ISO 2825:1981 | 2017 | Spice and condiments - Preparation of a ground sample for analysis Specifies a method of preparing a ground sample of spice or condiment for analysis from a laboratory sample ICS: 67.220.10 |
3 | TZS 10,000/-USD 10 |
TZS 1320:2017 (2nd Ed) -ISO 6571:2008 | 2017 | Spice, condiments and herbs - Determination of volatile oil content (hydrodistillation method) Specifies a method for the determination of the volatile oil content of spices, condiments and herbs. ICS: 67.220.10 |
13 | Tshs. 20,000/= USD 20 |
TZS 1319:2017 (2nd Ed) -ISO 1108:1992 | 2017 | Spice and condiments- Determination of non-volatile ether extract Specifies a method for the determination of the non-volatile ether extract in spices and condiments ICS: 67.220.10 |
4 | TZS 10,000/-USD 10 |
TZS 1318:2017 (2nd Ed)- ISO 939:1980 | 2017 | Spice and condiments - Determination of moisture content - entrainment method Specifies an entrainment method for the determination of the moisture content of spices and condiments. ICS 67.220.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1317:2010 (1st Ed) -ISO 930:1997 | 2010 | Spices and Condiments - Determination of acid insoluble ash Specifies a method for the determination of acid-insoluble ash from spices and condiments ICS 67.220.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1316:2017 (2nd Ed) -ISO 928:1997 | 2017 | Spices and Condiments - Determination of total ash Specifies a method for the determination of total ash from spices and condiments by destruction of organic matter by heating the sample to constant mass at a temperature of (550 ± 25) °C. ICS 67.220.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1315:2017 (2nd Ed)- ISO 927:2009 | 2017 | Spice and Condiments - Determination of Extraneous matter and foreign matter content Specifies a general procedure for visual examination, or with magnification not exceeding 10 times, of whole spices for the determination of macro filth. ICS 67.220.10 |
11 | Tshs. 20,000/= USD 20 |
TZS 1314:2010 (1st Ed) | 2010 | Oleaginous Seeds - methods of test Lays down methods of test for oilseeds ICS 67.200.20 |
10 | Tshs 15,000/= USD 15 |
TZS 1313:2014 (2nd Ed) -EAS 769:2012 | 2014 | Fortified edible fats and oils - Specification Prescribes requirements, methods of sampling and tests for fortified edible fats and oils intended for human consumption. The standard is applicable only where there exists no other specific ICS 67.200.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1312: 2010 | 2010 | Specification for wood charcoal briquettes for household use Specifies requirements for charcoal that is derived entirely from wood, in lump or briquette form, and that is intended for household use ICS. 79.020 |
18 | Tshs 25,000/= USD 25 |
TZS 1307: 2010- ISO 11439: 2000 | 2010 | Gas cylinders - high pressure cylinders for the on- board storage of natural gas as a fuel automotive vehicle Specifies minimum requirements for serially produced light weight refillable gas cylinders intended only for the on board storage of high pressure compressed natural gas as a fuel for automo ICS 43.060.40 |
73 | Tshs 80,000/= USD 80 |
TZS 1306: 2011 (1st Ed) -ISO 16069: 2004 | 2011 | Graphical symbols - Safety signs - Safety way guidance systems (SWGS) Describe the principles governing the design and application of visual components used to create a safety way guidance system (SWGS). ICS 01.080.10; 01.080.20 |
56 | Tshs 65,000/= USD 65 |
TZS 1305: 2011 (1st Ed) -ISO 7010: 2003 | 2011 | Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas Prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation ICS 01.080.10; 01.080.20 |
30 | Tshs. 35,000/= USD 35 |
TZS 1304: 2011 (1st Ed)- ISO 6309: 1987 | 2011 | Fire protection - Safety signs Specifies safety signs for use in the field of fire protection and fire-fighting ICS: 13.220.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1303-1: 2011(1st Ed) -ISO 8421-1: 1987 | 2011 | Fire protection - Vocabulary Part 1: General terms and phenomena of fire Gives terms and definitions in general for fire protection ICS: 13.220.20 |
6 | Tshs. 15,000/= USD 15 |
TZS 1302: 2010 (1st Ed) | 2010 | Standard practice for vibration testing of shipping containers Covers vibration tests procedure of filled shipping containers. Such tests may be used to assess the performance of a container, with its interior packing and means of closure, both in terms ICS 55.180.40 |
11 | Tshs 20,000/= USD 20 |
TZS 1301: 2010 (1st Ed) | 2010 | Standard practice for drop tests of loaded containers by free fall Covers procedures for the drop testing of loaded boxes, cylindrical containers and bags and sacks by the free- fall method ICS 55.180.40 |
15 | Tshs. 20,000/= USD 20 |
TZS 2112-1: 2018 - ISO 7482-1:1998 | 2018 | Raw goat skins — Part 1: Descriptions of defects describes the defects which may occur on raw goat skins (see note 1). It is applicable to fresh and cured (air dried, wet salted or dry Salted) goat skins. NOTE 1 - Certain defects, whi ICS: 59.140.20, |
7 | TSHS 15,000/= USD 15 |
TZS 2111-2: 2018 - ISO 4683-2: 1999 | 2018 | Leather — Raw sheep skins — Part 2: Designation and presentation Specifies a system for the designation and presentation of fine- and coarse-wooled sheep skins still bearing their wool which are intended for the leather or fur industry. It applies to fre ICS: 59.140.20, |
2 | TSHS 10,000/= USD 10 |
TZS 2111-1: 2018 - ISO 4683-1: 1998 | 2018 | Raw sheep skins — Part 1: Description of defects Describes the defects which may occur on raw sheep skins (see note I). It is applicable to fresh and cured (air dried, wet salted or dry salted) sheep skins. NOTE 1 Those defects which m ICS: 59.140.20, |
10 | TSHS 15,000/= USD 15 |
TZS 2110-1: 2018 - ISO 2822-1: 1974 | 2018 | Leather — Raw cattle hides and calf skins — Part 1: Descriptions of defects, Describes the defects which may occur on raw cattle hides and calf skins intended for tanning. It is applicable to fresh and cured raw cattle hides and calf skins, but not to casualty hides ICS: 59.140.20, |
5 | TSHS 10,000/= USD 10 |
TZS 2108: 2018 - ISO 2820: 1974 | 2018 | Leather — Raw hides of cattle and horses — Method of trim. Specifies the method of trimming the raw hides of cattle and horses, intended for the tanning industry. ICS: 59.140.20, |
2 | TSHS 10,000/= USD 10 |
TZS 2109: 2018 - ISO 2821: 1974 | 2018 | Leather — Raw hides of cattle and horses — Preservation by stack salting. Analyses the various preserving process defects Iikely to affect the raw hides of cattle and horses, and defines the rules for the preservation of these hides by Stack salting. ICS: 59.140.20, |
2 | TSHS 10,000/= USD 10 |
TZS 1970:2017- ISO 15649: 2001 | 2017 | Petroleum and natural gas industries — Piping Specifies the requirements for design and construction of piping for the petroleum and natural gas industries, including associated inspection and testing. ICS: 75.200, |
15 | TSHS 20,000/= USD 20 |
TZS 1971-1: 2018 - ISO 7240-1: 2014 | 2018 | Fire detection and alarm systems — Part 1: General and definitions Provides a set of general guidelines and definitions used in describing the fire detection and alarm system (FDAS) equipment installed in and around buildings, and the tests and requirements ICS: 13.220.20 |
3 | TSHS 10,000/= USD 10 |
TZS 1969-7:2017-ISO 11418-7:2016 | 2017 | Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms Specifies the design, dimensions, material and requirements of screw-neck vials for pharmaceutical preparations. Screw-neck vials are applicable to primary packs used in direct contact with ICS: 11.120.99, |
4 | TSHS 10,000/= USD 10 |
TZS 1969-5:2017 -ISO11418-5:2015 | 2017 | Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies Specifies the design, dimensions, material, and requirements of dropper assemblies consisting of a screw cap, dropper bulbs, and pipettes for the application and dosage of liquid pharmaceut ICS: 11.120.99, |
9 | TSHS 15,000/= USD 15 |
TZS 1969-4: 2017 - ISO 11418-4:2005 | 2017 | Containers and accessories for Pharmaceutical preparations — Part 4: Tablet glass bottles Specifies the design, dimensions, material and requirements of tablet glass bottles. Tablet glass bottles are applicable to primary packs used in direct contact with a drug ICS: 11.120.99 |
4 | TSHS 10,000/= USD 10 |
TZS 1969-3: 2017-ISO 11418-3: 2005 | 2017 | Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage Specifies the design, dimensions, material and requirements of screw-neck glass bottles (veral) for pharmaceutical preparations in solid and liquid dosage forms. Screw-neck glass bottles are ICS: 11.040.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1969-2: 2017 /ISO 11418-2: 2005 | 2017 | Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups Specifies the design, dimensions, material and requirements of screw-neck glass bottles for pharmaceutical preparations in liquid form (syrups). Screw-neck glass bottles are applicable to pr ICS: 11.040.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1969-1: 2017 ISO 11418-1: 2005 | 2017 | Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles Specifies the design, dimensions, material and requirements of drop-dispensing glass bottles. Drop-dispensing glass bottles are applicable to primary packs used in direct contact with a drug ICS: 11.040.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1968-4: 2017 - ISO 10993-4:2002 | 2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood Provides general requirements for evaluating the interactions of medical devices with blood. It describes a) a classification of medical and dental devices that are intended for use in con ICS: 11.100.20, |
34 | TSHS 40,000/= USD 40 |
TZS 1968-3:2017-ISO 10993-3:2014 | 2017 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity Specifies strategies for risk estimation, selection of hazard identification tests and risk management, with respect to the possibility of the following potentially irreversible biological e ICS: 11.100.20 |
34 | TSHS 40,000/= USD 40 |
TZS 1968-2: 2017 ISO 10993-2: 2006 | 2017 | Biological evaluation of medical devices — Part 2: Animal welfare requirements Aimed at those who commission, design and perform tests or evaluate data from animal tests undertaken to assess the biocompatibility of materials intended for use in medical devices, or that ICS: 11.040.20 |
13 | TSHS 20,000/= USD 20 |
TZS 1968-1: 2017 ISO 10993-1: 2009 | 2017 | Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process Describes: ⎯the general principles governing the biological evaluation of medical devices within a risk management process; ⎯the general categorization of devices based on the nature and ICS: 11.040.20 |
21 | TSHS 30,000/= USD 30 |
TZS 1967: 2017 ISO 13485: 2016 | 2017 | Medical devices — Quality management systems — Requirements for regulatory purposes (Management system) Specifies requirements for a quality management system where an Organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer ICS: 03.100.70 |
36 | TSHS 45,000/= USD 45 |
TZS 1965: 2017 | 2017 | Cigar tobacco — Specification Prescribes the requirements, methods of test and sampling for cigars. ICS: 65.160 |
8 | TSHS 15,000/= USD 15 |
TZS 1964: 2017 | 2017 | Tobacco and tobacco products — Determination of moisture content Specifies a method for the determination of the loss in mass when tobacco is heated in air at 105 °C ± 5 °C. ICS: 65.160 |
3 | TSHS 10,000/= USD 10 |
TZS 1963-8: 2017 ISO 13909-8: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias Sets out principles and procedures for testing the bias of test samples of hard coals or cokes. ICS: 73.040 |
31 | TSHS 40,000/= USD 40 |
TZS 1963-7: 2017 ISO 13909-7: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing Equations are developed which link the variables which contribute to overall sampling precision. Methods are described for estimating overall precision and for deriving values for primary in ICS: 73.040 |
40 | TSHS 45,000/= USD 45 |
TZS 1963-6: 2017 ISO 13909-6: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples Describes the preparation of samples of coke from the combination of primary increments to the preparation of samples for specific tests. ICS: 73.040 |
24 | TSHS 30,000/= USD 30 |
TZS 1963-5: 2017 ISO 13909-5: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 5: Coke — sampling from moving streams Specifies procedures and requirements for the design and establishment of sampling schemes for the mechanical sampling of coke from moving streams and the methods of sampling used. ICS: 73.040 |
29 | TSHS 35,000/= USD 35 |
TZS 1963-4: 2017 ISO 13909-4: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples Describes the preparation of samples of coal from the combination of primary increments to the preparation of samples for specific tests. ICS: 73.040 |
29 | TSHS 35,000/= USD 35 |
TZS 1963-3: 2017 ISO 13909-3:2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 3: Coal — sampling from stationary lots Specifies procedures for the mechanical sampling of coal from stationary lots, for example from wagons, barges, ships and stockpiles ICS: 73.040 |
18 | TSHS 25,000/= USD 25 |
TZS 1963-2: 2017 ISO 13909-2: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 2: Coal — sampling from moving streams Specifies procedures and requirements for the design and establishment of mechanical Samplers for the sampling of coal from moving streams and describes the methods of sampling used. ICS: 73.040 |
31 | TSHS 40,000/= USD 40 |
TZS 1963-1: 2017 ISO 13909-1: 2001 | 2017 | Hard coal and coke — Mechanical sampling — Part 1: General introduction Defines the basic terms used in the sampling of solid mineral fuels, describes the general principles of sampling and details the information to be provided in the documentation and the samp ICS: 73.040 |
9 | TSHS 15,000/= USD 15 |
TZS 1962-1: 2017 ISO 5069-1: 1983 | 2017 | Brown coals and lignites — Principles of sampling — Part 1: Sampling for determination of moisture content and for general analysis Establishes the principles of the methods to be used for the sampling of brown coals and lignites (herein after called “coals”) from streams, wagons, barges and stockpiles when the Sample is ICS: 73.040 |
3 | TSHS 10,000/= USD 10 |
TZS 1958: 2017 (1st Ed) | 2017 | Wrought aluminium and aluminium alloys — Extruded profiles — Dimensions shapes and its tolerances Specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 ICS: 23.040.15 |
20 | TSHS 25,000/= USD 25 |
TZS 1955: 2017 ISO 6183:1990 | 2017 | Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation This Standard lays down requirements for the design and installation of fixed carbon dioxide fire-extinguishing Systems for use on premises. The requirements are not valid for extinguishing ICS: 13.220.10 |
22 | TSHS 30,000/= USD 30 |
TZS 1954: 2017 IEC 60065: 2014 | 2017 | Audio, video and similar electronic apparatus — Safety requirements. Applies to electronic apparatus designed to be fed from the MAINS, from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or p ICS: 31.020 |
159 | TSHS 165,000/= USD 165 |
TZS 1953-1: 2017 IEC 60950-1: 2005 | 2017 | Information technology equipment — Safety — Part 1: General requirements Applicable to mains- powered or battery powered information technology equipment including electrical business equipment and associated equipment with RATED VOLTAGE not exceeding 600V ICS: 33.050 |
29 | TSHS 35,000/= USD 35 |
TZS 1952: 2017 | 2017 | Off-grid solar photovoltaic lighting kits — Requirements Applies to off-grid lighting appliances or kits that can be installed by a typical user without employing a technician. The kits are generally comprised of a light source (LED, CFL, or other ICS: 27.160 |
8 | TSHS 15,000/= USD 15 |
TZS 1951-9-5: 2017 IEC 62257-9-5: 2016 | 2017 | Recommendations for renewable energy and hybrid systems for rural electrification — Part 9-5: Integrated systems — Selection of stand-alone lighting kits for rural electrification Technical specification, applies to stand –alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a t chnician. ICS: 27.160 |
306 | TSHS 315,000/= USD 315 |
TZS 1948-22: 2017 IEC 60896-22: 2004 | 2017 | Stationary lead-acid batteries — Part 22: Valve regulated types — Requirements Applies to all stationary lead –acid cells and Monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply) ICS: 29.220.30 |
57 | TSHS 65,000/= USD 65 |
TZS 1947-2: 2017 ISO 27769-2: 2009 | 2017 | Wood-based panels — Wet-process fibreboard —Part requirements Specifies the manufacturing property requirements for wet-process fibreboard. ICS: 79.060.20 |
11 | TSHS 20,000/= USD 20 |
TZS 1947-1: 2017 ISO 27769-1: 2009 | 2017 | Wood-based panels — Wet-process fibreboard — Part 1: Classifications Provides a classification matrix and related mandatory tests for two types of wet process fibreboard: soft boards and hardboards. ICS: 79.060.20 |
7 | TSHS 15,000/= USD 15 |
TZS 1946: 2017 ISO 16893: 2016 | 2017 | Wood-based panels — Particleboard Specifies a classification matrix and the related mandatory tests and thickness ranges to be applied to wood-based particleboard for general purposes, furniture, loadbearing applications and ICS: 79.060.20 |
18 | TSHS 25,000/= USD 25 |
TZS 1945: 2017 ISO 16895: 2016 | 2017 | Wood-based panels — Dry-process fibreboard Specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process wood-based fibreboard. It then provides the manufac ICS: 79.060.20 |
29 | TSHS 35,000/= USD 35 |
TZS 1944: 2017 ISO 17064: 2004 | 2017 | Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary Definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB). ICS: 79.060.20 |
2 | TSHS 10,000/= USD 10 |
TZS 1943: 2017 | 2017 | Civil engineering specifications — Performance graded asphalt binder Covers asphalt binders graded by performance. Grading designations are related to the average seven-day maximum pavement design temperature, and minimum pavement design temperature. The valu ICS: 93.080.20 |
8 | TSHS 15,000/= USD 15 |
TZS 1942: 2017 | 2017 | Civil engineering specifications — Cationic bitumen road emulsion Covers seven grades of cationic emulsified asphalt for use in pavement construction in the manner designated. The values stated in either SI unit are to be regarded as standard. ICS: 93.080.20 |
10 | TSHS 15,000/= USD 15 |
TZS 1941: 2017 | 2017 | Civil engineering specifications — Anionic bitumen road emulsion Covers thirteen grades of emulsified asphalt for use in pavement construction in the manner designated. ICS: 93.080.20 |
9 | TSHS 15,000/= USD 15 |
TZS 1940: 2017 | 2017 | Civil engineering specifications — Medium — Curing cutback bitumen Applies to bituminous materials and covers the requirements for five (5) grades of medium curing cutback bitumen type suitable for road construction and similar purposes. ICS: 93.080.20 |
6 | TSHS 15,000/= USD 15 |
TZS 1939: 2017 | 2017 | Civil engineering specifications — Penetration grade bitumen Applies to bituminous materials and covers the requirements for four (4) penetration grades of bitumen suitable for road construction and similar purposes. ICS: 93.080.20 |
13 | TSHS 20,000/= USD 20 |
TZS 1938: 2016 | 2016 | Dates — Specification Prescribes requirements and methods of sampling and tests for dates in pitted or unpitted styles obtained from sound fruit of the date tree (Phoenix dactylifera L.) intended for direct human ICS: 67.080.10 |
8 | TSHS 15,000/= USD 15 |
TZS 1937: 2017 ISO 11760: 2005 | 2017 | Classification of coals This International Standard describes a simple classification system for coals providing,guidance on the selection of the appropriate ISO standard procedures for the analyses and testing o ICS: 73.040 |
9 | TSHS 15,000/= USD 15 |
TZS 1936-5: 2017 ISO 7404-5:2009 | 2017 | Methods for the petrographic analysis of coals — Part 5: Method of determining microscopically the reflectance of vitrinite Determining the reflectance of vitrinite of coals microscopically on the polished surfaces, immersed in oil. The methods are applicable to coals from single seams or coal blends covering the ICS: 73.040 |
14 | TSHS 20,000/= USD 20 |
TZS 1936-4: 2017 ISO 7404-4: 1988 | 2017 | Methods for the petrographic analysis of bituminous coal and anthracite — Part 4: Method of determining microlithotype, carbominerite and minerite composition Specifies a method, using a graticule with 20 crossline intersections, for determining the proportions of microlitypes, carbominerite and minerite in coals.it applies only to determinations ICS: 73.040 |
6 | TSHS 15,000/= USD 15 |
TZS 1936-3: 2017 ISO 7404-3: 2009 | 2017 | Methods for the petrographic analysis of coals — Part 3: Method of determining maceral group composition Specifies a method for determining the proportions of the maceral groups (and the minerals, if desired) in coals. It is concerned only with determinations made on polished particulate blocks ICS: 73.040 |
7 | TSHS 15,000/= USD 15 |
TZS 1936-2: 2017 ISO 7404-2: 2009 | 2017 | Methods for the petrographic analysis of coals — Part 2: Methods of preparing coal samples Specifies methods for preparing a polished particulate block from a sample of crushed coal for analysis by reflectance microscopy. These methods can also be applied to the preparation of a p ICS: 73.040 |
12 | TSHS 20,000/= USD 20 |
TZS 1936-1: 2017 ISO 7404-1:2016 | 2017 | Methods for the petrographic analysis of coals — Part 1: Vocabulary Defines terms that are used in connection with both maceral and microlithotype analyses, and with the determination of the reflectance of vitrinite. It applies to the terms used in the exami ICS: 73.040 |
6 | TSHS 15,000/= USD 15 |
TZS 1935: 2017 ISO 18283: 2006 | 2017 | Hard coal and coke — Manual sampling Defines the basic terms used in manual sampling of hard coal and coke and describes the general principles of sampling. It specifies procedures and requirements for establishing a manual sam ICS: 73.040 |
71 | Tshs. 80,000/= USD 80 |
TZS 1934-2: 2017 ISO 1213-2: 1992 | 2017 | Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis Defines terms commonly employed in the sampling, testing and analysis of solid mineral fuels. Alternative names are given for several terms: in some cases, however, the use of the alternativ ICS: 75.160.10 |
10 | TSHS 15,000/= USD 15 |
TZS 1934-1: 2017 ISO 1213-1:1993 | 2017 | Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation Defines terms commonly employed in coal preparation. ICS: 75.160.10 |
20 | TSHS 30,000/= USD 30 |
TZS 1933: 2016 | 2016 | Code of hygienic practice for groundnuts (Peanuts) Applies to groundnuts (Arachis hypogaea L) of all types and forms of raw, dried groundnuts (peanuts) in-shell and shelled. This Tanzania Standard elaborates the minimum requirements of hygie ICS: 67.080.10 |
15 | TSHS 15,000/= USD 15 |
TZS 1932: 2016 ISO 15705: 2002 | 2016 | Water quality — Determination of the chemical oxygen demand index (ST-COD) — Small-scale sealed-tube method Specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample, which includes al ICS: 13.060.50 |
18 | TSHS 25,000/= USD 25 |
TZS 1931: 2016 | 2016 | Cotton seeds for oil extraction — Specification Prescribes requirements and methods of sampling and tests for cotton (Gossypium species family Malvaceae) seeds for oil extraction. ICS: 67.200.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1930: 2016 ISO 5815-2: 2003 | 2016 | Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 2: Method for undiluted sample Specifies determination of the biochemical oxygen demand (BOD) of waters of undiluted samples. It is applicable to all waters having biochemical oxygen demands greater than or equal to 0,5 m ICS: 13.060.30 |
13 | TSHS 20,000/= USD 20 |
TZS 1929: 2016 ISO 15586: 2003 | 2016 | Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace Includes principles and procedures for the determination of trace levels of: Ag, Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, and Zn in surface water, ground water, drinking wa ICS: 13.060.50 |
23 | TSHS 30,000/= USD 30 |
TZS 1928-7: 2017 ISO 6362-7:2014 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition Specifies the chemical composition of wrought aluminium and aluminium alloys. The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with ICS: 23.040.15 |
6 | TSHS 15,000/= USD 15 |
TZS 1928-6: 2017 ISO 6362-6:2012 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions Specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded round bars having diameters in the range from 8 mm up to 350 mm; and square and hexagonal b ICS: 77.150.10 |
16 | TSHS 25,000/= USD 25 |
TZS 1928-5: 2017 ISO 6362-5: 2012 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions Specifies the tolerances on dimensions and shape of the following: wrought aluminium and aluminium alloy extruded round bars, having diameters in the range from 8 mm up to 350 mm; wrought al ICS: 23.040.15 |
5 | TSHS 10,000/= USD 10 |
TZS 1928-3: 2017 ISO 6362-3: 2012 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions Specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the ICS: 23.040.15 |
7 | TSHS 15,000/= USD 15 |
TZS 1320:2017 (2nd Ed)- ISO 6571:2008 | 2017 | Spice, condiments and herbs - Determination of volatile oil content (hydrodistillation method) Specifies a method for the determination of the volatile oil content of spices, condiments and herbs ICS: 67.220.10 |
13 | Tshs. 20,000/= USD 20 |
TZS 1319:2017 (2nd Ed)- ISO 1108:1992 | 2017 | Spice and condiments- Determination of non-volatile ether extract Specifies a method for the determination of the non-volatile ether extract in spices and condiments ICS: 67.220.10 |
4 | TZS 10,000/-USD 10 |
TZS 1318:2017 (2nd Ed)- ISO 939:1980 | 2017 | Spice and condiments - Determination of moisture content - entrainment method Specifies an entrainment method for the determination of the moisture content of spices and condiments ICS 67.220.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1317:2010 (1st Ed) -ISO 930:1997 | 2010 | Spices and Condiments - Determination of acid insoluble ash Specifies a method for the determination of acid-insoluble ash from spices and condiments ICS 67.220.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1316:2017 (2nd Ed)- ISO 928:1997 | 2017 | Spices and Condiments - Determination of total ash Specifies a method for the determination of total ash from spices and condiments by destruction of organic matter by heating the sample to constant mass at a temperature of (550 ± 25) °C. ICS 67.220.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1315:2017 (2nd Ed)- ISO 927:2009 | 2017 | Spice and Condiments - Determination of Extraneous matter and foreign matter content Specifies a general procedure for visual examination, or with magnification not exceeding 10 times, of whole spices for the determination of macro filth ICS 67.220.10 |
11 | Tshs. 20,000/= USD 20 |
TZS 1314:2010 (1st Ed) | 2010 | Oleaginous Seeds - methods of test Lays down methods of test for oilseeds ICS 67.200.20 |
10 | Tshs. 15,000/= USD 15 |
TZS 1313:2014 (2nd Ed) -EAS 769:2012 | 2014 | Fortified edible fats and oils - Specification Prescribes requirements, methods of sampling and tests for fortified edible fats and oils intended for human consumption. The standard is applicable only where there exists no other specific ICS 67.200.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1312: 2010 | 2010 | Specification for wood charcoal briquettes for household use Specifies requirements for charcoal that is derived entirely from wood, in lump or briquette form, and that is intended for household use ICS. 79.020 |
18 | Tshs 25,000/= USD 25 |
TZS 1307: 2010-ISO 11439: 2000 | 2010 | Gas cylinders - high pressure cylinders for the on- board storage of natural gas as a fuel automotive vehicle Specifies minimum requirements for serially produced light weight refillable gas cylinders intended only for the on board storage of high pressure compressed natural gas as a fuel for automo ICS 43.060.40 |
73 | Tshs 80,000/= USD 80 |
TZS 1306: 2011 (1st Ed) -ISO 16069: 2004 | 2011 | Graphical symbols - Safety signs - Safety way guidance systems (SWGS) Describe the principles governing the design and application of visual components used to create a safety way guidance system (SWGS). ICS 01.080.10; 01.080.20 |
56 | Tshs 65,000/= USD 65 |
TZS 1305: 2011 (1st Ed)- ISO 7010: 2003 | 2011 | Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas Prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation ICS 01.080.10; 01.080.20 |
30 | Tshs 35,000/= USD 35 |
TZS 1304: 2011 (1st Ed0- ISO 6309: 1987 | 2011 | Fire protection - Safety signs Specifies safety signs for use in the field of fire protection and fire-fighting ICS: 13.220.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1303-1: 2011(1st Ed)- ISO 8421-1: 1987 | 2011 | Fire protection - Vocabulary Part 1: General terms and phenomena of fire Gives terms and definitions in general for fire protection ICS: 13.220.20 |
6 | Tshs. 15,000/= USD 15 |
TZS 1302: 2010 (1st Ed) | 2010 | Standard practice for vibration testing of shipping containers Covers vibration tests procedure of filled shipping containers. Such tests may be used to assess the performance of a container, with its interior packing and means of closure, both in terms ICS 55.180.40 |
11 | Tshs 20,000/= USD 20 |
TZS 1301: 2010 (1st Ed) | 2010 | Standard practice for drop tests of loaded containers by free fall Covers procedures for the drop testing of loaded boxes, cylindrical containers and bags and sacks by the free- fall method ICS 55.180.40 |
15 | Tshs. 20,000/= USD 20 |
TZS 1300: 2010 (1st Ed) | 2010 | Standard practice for impact testing for shipping containers and systems Covers two procedures for conducting impact tests on loaded containers or shipping units (pallet loads) as follows: a. procedure A to test the ability of a container or shipping unit to wi ICS 55.180.40 |
10 | Tshs 15,000/= USD 15 |
TZS 1299: 2010 (1st Ed) | 2010 | Standard practice for conditioning containers, packages or packaging components for testing Provides special conditioning and testing atmospheres that may be used to simulate particular field condition that a container, package or packaging component may encounter during its life o ICS 55.180.40 |
6 | Tshs. 15,000/= USD 15 |
TZS 1298: 2010 (1st Ed) | 2010 | Sharps container - specification Specifies requirements for sharps containers intended to hold potentially infectious medical waste comprised largely of devices which can readily cause physical injury, e. g scalpels, blades ICS: 11.140 |
10 | Tshs. 15,000/= USD 15 |
TZS 1297: 2010 (1st Ed)- ISO 2758: 2001 | 2010 | Paper - Determination of bursting strength Specifies a method for measuring the bursting strength of paper submitted to increasing hydraulic pressure ICS: 85.060 |
17 | Tshs 25,000/= USD 25 |
TZS 1296: 2010 (1st Ed)- ISO 13820: 1996 | 2010 | Paper, board and corrugated fiberboard - Description and calibration of compressed testing equipment Specifies the essential characteristics and the principles of calibration of compression testing machines used in the testing of paper, board and corrugated fibreboard ICS: 85.100 |
6 | Tshs. 15,000/= USD 15 |
TZS 1294-2: 2010- ISO 5636-2: 1984 | 2010 | Paper and board – Determination of air permeance (medium range) – Part 2: Schopper method Specifies the methods of determiningthe air permeance of paper and board in the medium air permeance range using the schopper apparatus ICS: 85.060 |
3 | TZS 10,000/-USD 10 |
TZS 1294-1: 2010 -ISO 5636-1: 1984 | 2010 | Paper and board – Determination of air permeance (medium range) – Part 1: General method Specifies basic requirements for apparatus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range ICS: 85.060 |
4 | TZS 10,000/-USD 10 |
TZS 1293 (Part 2): 2010- ISO 3310-2:1999 | 2010 | Test sieves- technical requirements and testing – Part 2: Test sieves of perforated metal plate Specifies the technical requirement and corresponding test methods for sieves of perforated metal plate. It applies to test sieves having, round holes, with sizes from 125 mm down to 1 mm or ICS: 19.120 |
8 | Tshs. 15,000/= USD 15 |
TZS 1281: 2012 (1st Ed)- EAS 745: 2010 | 2012 | Potato crisps - specification Specifies requirements and methods of sampling and test for crisps made from potato tuber ICS: 67.080.20 |
10 | Tshs. 15,000/= USD 15 |
TZS 1280: 2012 (1st Ed)- EAS 746: 2010 | 2012 | Frozen potato chips - Specification Specifies the requirement and methods of sampling and test for frozen potato chips to be supplied packaged either in retail packs or in bulk for human consumption ICS: 67.080.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1279: 2010 (1st Ed)- EAS 747:2010 | 2010 | Fried potato chips - specification Specifies requirements and methods of sampling and test for deep fried potato chips ready for consumption ICS: 67.080.20 |
4 | TZS 10,000/-USD 10 |
TZS 1278: 2017 (1st Ed) -EAS 748: 2017 | 2017 | Fresh potato tuber (ware potato tuber) - Specification Specifies the requirement for ware potato tuber of varieties (cultivars) grown from (Solanumtuberosum) and its hybrids to be supplied fresh and either packaged or loose for human consumption ICS: 67.080.2 |
6 | Tshs. 15,000/= USD 15 |
TZS 1277:2010 (1st Ed)- EAS 741: 2010 | 2010 | Cassava wheat composite Flour -Specification Specifies the requirements and the methods of sampling and test for cassava - wheat composite flour ICS: 67.080.20 |
5 | TZS 10,000/-USD 10 |
TZS 1276:2010 (1st Ed) -EAS 738: 2010 | 2010 | Fresh Sweet Cassava - Specification Specifies requirements and methods of sampling and test for varieties of fresh sweet cassava roots, intended for direct human consumption ICS: 67.080.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1275:2010 (1st Ed) -EAS 743: 2010 | 2010 | Cassava Crips - Specification Specifies requirements and methods of sampling and test for crisps made from sweet varieties of cassava ICS: 67.080.20 |
4 | TZS 10,000/-USD 10 |
TZS 1274: 2018 (2nd Ed) | 2018 | Packaging - Metal crown closure for glass bottles - specification Specifies requirements, design and material, manufacturing, sampling and test procedures for intermediate metal crown closures for aerated and non- aerated glass bottles ICS: 55.100 |
12 | Tshs. 20,000/= USD 20 |
TZS 1273: 2010 (1st Ed) | 2010 | Pressure sensitive plastic film tape - Specification Specifies pressure sensitive adhesive synthetic plastic tapes for use in packaging sealing and other similar purposes ICS: 83.180 |
9 | Tshs. 15,000/= USD 15 |
TZS 1272: 2010 | 2010 | Pressure sensitive adhesive polypropylene tapes for packaging Specifies pressure sensitive adhesive polypropylene tapes for packaging and sealing ICS: 83.180 |
7 | Tshs. 15,000/= USD 15 |
TZS 1271: 2010 | 2010 | Protective polyvinyl chloride tapes – Specification Specifies protective polyvinyl chloride tapes, which are used for preservation of iron pipes, iron bar and metal products ICS: 83.080 |
7 | Tshs. 15,000/= USD 15 |
TZS 1263-3: 2010 (1st Ed) | 2010 | Textiles- Woven bags from natural fibres- Specification Part 3: Woven bags for Sugar Specifies minimum requirements and other particulars of natural fibre bags made from jute, cotton or kenaf for the packaging of sugar ICS 55.080 |
9 | Tshs. 15,000/= USD 15 |
TZS 1263-2: 2010 (1st Ed) | 2010 | Textiles - Woven bags from natural fibres - Specification Part 2): Bags for milled products Specifies the bag and making-up requirements for woven bags made from natural fibres (excluding sisal) for packing and storage of milled products ICS: 55.080 |
4 | TZS 10,000/-USD 10 |
TZS 1263-1: 2010 (1st Ed) | 2010 | Textiles - Woven bags from natural fibres - Specification Part 1: Bags for cereals Specifies the constructional and performance requirements of woven bags made from natural fibres excluding sisal to contain 90 kg load of any type of cereal or pulses. It also prescribes the ICS 55.080 |
7 | Tshs. 15,000/= USD 15 |
TZS 1261: 2010 (1st Ed)- ISO 7887: 1994 | 2010 | Water quality - Examination and determination of colour Specifies three methods for the examination of colour ICS 13.060.40 |
8 | Tshs. 15,000/= USD 15 |
TZS 1260: 2010(1st Ed)- ISO 9965: 1993 | 2010 | Water quality - Determination of selenium Atomic absorption spectrometric method (hydride technique) Specifies a method for the determination of selenium and organically bonded selenium in drinking waters, ground waters and surface waters, in concentration of 1ug/1 and 10ug/1. Higher concen ICS: 13.060.50 |
5 | TZS 10,000/-USD 10 |
TZS 1259:2010- ISO 9377-2: 2000 | 2010 | Water quality- Determination of hydrocarbon oil index- Part 2: method using solvent extraction and gas chromatography Specifies a method for the determination of the hydrocarbon oil index in waters by means of gas chromatography. The method is suitable for surface water, waste water and water from sewage tr ICS: 13.060.50 |
19 | Tshs 25,000/= USD 25 |
TZS 1257: 2017 | 2017 | Textiles – Specification for open mouth woven poly-sacks made from polypropylene tape- yarns Specifies minimum requirements for materials, dimensions, and performance of open mouth poly-sack manufactured from plain woven fabric produced from polypropylene ICS 55.080 |
5 | TZS 10,000/-USD 10 |
TZS 1256:2010 (1st Ed) | 2010 | Non - Cereal Based Alcoholic Beverage - Specification Specifies requirements and methods of sampling and test for non-cereal based alcoholic beverages, produced by fermentation of soluble extracts of non-cereal ingredients. The standard does n ICS 67.160.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1252: 2010 (1st Ed) | 2010 | Stainless steel needle tubing for manufacture of medical device Specifies the dimensions, surface and mechanical properties of normal and thin- walled tubing of designated metric sizes 0.3 mm to 3.4 mm and of extra- thin-walled tubing of designed metric ICS: 77.140.20 |
11 | Tshs. 20,000/= USD 20 |
TZS 1251: 2010 (1st Ed)- ISO 6357: 1985 | 2010 | Documentation- spine titles on books and other publications Establishes rules for general layout (position and orientation) and use of spine tiles and corresponding text used on books, serial publications, periodicals, reports and other forms of docu ICS: 01.140.40 |
3 | TZS 10,000/-USD 10 |
TZS 1928-2: 2017 ISO 6362-2: 2014 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties Specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products. ICS: 23.040.15 |
24 | TSHS 30,000/= USD 30 |
TZS 1928-1: 2017 ISO 6362-1: 2012 | 2017 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery Specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy rods/bars, tubes and profiles for general engineering applications. It applies to extr ICS: 23.040.15 |
13 | TSHS 20,000/= USD 20 |
TZS 1927: 2017 ISO 2107: 2007 | 2017 | Aluminium and aluminium alloys — Wrought products — Temper designations Establishes temper designations as required for identification for all product forms of wrought aluminium and aluminium alloys ICS: 25.200, 77.120.10 |
9 | TSHS 15,000/= USD 15 |
TZS 1913-1: 2016- IEC 61008-1: 2010 | 2016 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) — Part 1: General rules Applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporation over current ICS:29.120.50 |
121 | TSHS 130,000/= USD 130 |
TZS 1912:2016 | 2016 | Electric cables —Thermosetting insulated, armoured cables for voltages of 600/ 1 000 V and 1 900/ 3 300 V Specifies requirements for construction and describes methods of test for armoured cable with thermosetting insulation of rated voltages 600/1 000 V and 1 900/3 300 V. Cables specified in th ICS: 29.060.20 |
39 | TSHS 45,000/= USD 45 |
TZS 1911-1: 2016 IEC 61427-1: 2013 | 2016 | Secondary cells and batteries for renewable energy storage — General requirements and methods of test — Part 1: Photovoltaic off-grid application Gives general information relating to the requirements for the secondary batteries used in photovoltaic energy systems (PVES) and to the typical methods of test used for the verification of ICS: 29.220.20 |
14 | TSHS 20,000/= USD 20 |
TZS 1909: 2016 ISO 10874: 2009 | 2016 | Resilient, textile and laminate floor coverings — Classification This Standard establishes a classification system for resilient, textile and laminate floor coverings. The classification is based on practical requirements for areas of use and intensity o ICS: 97.150 |
3 | TSHS 10,000/= USD 10 |
TZS 1908: 2016 | 2016 | Rigid (Unplasticized) Polyvinyl Chloride (PVC) Soffit —Specification Specification establishes requirements and test methods for the materials, dimensions, camber, impact strength, expansion, and appearance of extruded single-wall soffit manufactured from rig ICS: 23.040.20 |
6 | TSHS 15,000/= USD 15 |
TZS 1907: 2016 | 2016 | Rigid Polyvinyl Chloride (PVC) siding — Specification Establishes requirements and test methods for the materials, dimensions, warp, shrinkage, impact strength, expansion, and appearance of extruded single-wall siding manufactured from rigid (u ICS: 23.040.20 |
10 | TSHS 15,000/= USD 15 |
TZS 1906: 2016 -ISO 14486: 2012 | 2016 | Laminate floor coverings — Specification Specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. ICS: 97.150 |
8 | TSHS 15,000/= USD 15 |
TZS 1905: 2016 | 2016 | Gypsum cove cornice — Specification Covers specification, sampling, inspection and test methods of gypsum cove cornice for use in buildings. NOTE 1 — Requirements that must be specified by the purchaser are listed in Appe ICS: 91.100.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1904: 2016- ISO 21690: 2006 | 2016 | Glass in building — Glass blocks — Specification and test methods Specifies requirements for the properties of glass blocks used for the construction of non-load-bearing walls and horizontally spanning panels. This International Standard also specifies tes ICS: 81.040.20 |
10 | TSHS 15,000/= USD 15 |
TZS 1903-1: 2016 - EAS 856-1: 2015 | 2016 | 2-Pack acrylic resin-based auto-refinishing paint — Specification Specifies requirements, sampling and test methods for thinners for 2-Pack acrylic resin-based auto-refinishing paint. ICS: 87.060.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1902: 2016- EAS 854: 2015 | 2016 | Thinner for nitrocellulose resin-based paints and lacquers — Specification Specifies requirements, sampling and test methods for thinners for nitro-cellulose resin- based paints and lacquers. ICS: 87.060.30 |
5 | TSHS 10,000/= USD 10 |
TZS 1901: 2016- EAS 857: 2016 | 2016 | Thinner for acrylic resin based auto-refinishing paints — Specification Specifies requirements, sampling and test methods for thinner for acrylic resin based auto-refinishing paints. ICS: 87.040 |
4 | TSHS 10,000/= USD 10 |
TZS 1900-2:2016/EAS 853-2:2016 | 2016 | Auto-refinishing paint — Specification — Part 2: Nitrocellulose resin based Specifies the requirements, sampling and test methods for auto refinishing paint, nitrocellulose resin based. ICS: 87.040 |
8 | TSHS 15,000/= USD 15 |
TZS 1900-1:2016/EAS 853-1:2016 | 2016 | Auto-refinishing paint — Specification — Part 1: Synthetic resin based. Specifies the requirements, sampling and test methods for auto-refinishing paint, synthetic resin based. ICS: 87.040 |
6 | TSHS 15,000/= USD 15 |
TZS 1300: 2010 (1st Ed) | 2010 | Standard practice for impact testing for shipping containers and systems Covers two procedures for conducting impact tests on loaded containers or shipping units (pallet loads) as follows: a. procedure A to test the ability of a container or shipping unit to wi ICS 55.180.40 |
10 | Tshs. 15,000/= USD 15 |
TZS 1299: 2010 (1st Ed) | 2010 | Standard practice for conditioning containers, packages or packaging components for testing Provides special conditioning and testing atmospheres that may be used to simulate particular field condition that a container, package or packaging component may encounter during its life o ICS 55.180.40 |
6 | Tshs. 15,000/= USD 15 |
TZS 1298: 2010 (1st Ed) | 2010 | Sharps container - specification Specifies requirements for sharps containers intended to hold potentially infectious medical waste comprised largely of devices which can readily cause physical injury, e. g scalpels, blades ICS: 11.140 |
10 | Tshs. 15,000/= USD 15 |
TZS 1297: 2010 (1st Ed)- ISO 2758: 2001 | 2010 | Paper - Determination of bursting strength Specifies a method for measuring the bursting strength of paper submitted to increasing hydraulic pressure ICS: 85.060 |
17 | Tshs 25,000/= USD 25 |
TZS 1296: 2010 (1st Ed) -ISO 13820: 1996 | 2010 | Paper, board and corrugated fiberboard - Description and calibration of compressed testing equipment Specifies the essential characteristics and the principles of calibration of compression testing machines used in the testing of paper, board and corrugated fibreboard ICS: 85.100 |
6 | Tshs. 15,000/= USD 15 |
TZS 1294-2: 2010- ISO 5636-2: 1984 | 2010 | Paper and board – Determination of air permeance (medium range) – Part 2: Schopper method Specifies the methods of determiningthe air permeance of paper and board in the medium air permeance range using the schopper apparatus ICS: 85.060 |
3 | TZS 10,000/-USD 10 |
TZS 1294-1: 2010 ISO- 5636-1: 1984 | 2010 | Paper and board – Determination of air permeance (medium range) – Part 1: General method Specifies basic requirements for apparatus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range ICS: 85.060 |
4 | TZS 10,000/-USD 10 |
TZS 1293 (Part 2): 2010- ISO 3310-2:1999 | 2010 | Test sieves- technical requirements and testing – Part 2: Test sieves of perforated metal plate Specifies the technical requirement and corresponding test methods for sieves of perforated metal plate. It applies to test sieves having, round holes, with sizes from 125 mm down to 1 mm or ICS: 19.120 |
8 | Tshs. 15,000/= USD 15 |
TZS 1281: 2012 (1st Ed)- EAS 745: 2010 | 2012 | Potato crisps - specification Specifies requirements and methods of sampling and test for crisps made from potato tuber ICS: 67.080.20 |
10 | Tshs. 15,000/= USD 15 |
TZS 1280: 2012 (1st Ed) -EAS 746: 2010 | 2012 | Frozen potato chips - Specification Specifies the requirement and methods of sampling and test for frozen potato chips to be supplied packaged either in retail packs or in bulk for human consumption ICS: 67.080.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1279: 2010 (1st Ed) -EAS 747:2010 | 2010 | Fried potato chips - specification Specifies requirements and methods of sampling and test for deep fried potato chips ready for consumption ICS: 67.080.20 |
4 | TZS 10,000/-USD 10 |
TZS 1278: 2017 (1st Ed)- EAS 748: 2017 | 2017 | Fresh potato tuber (ware potato tuber) - Specification Specifies the requirement for ware potato tuber of varieties (cultivars) grown from (Solanumtuberosum) and its hybrids to be supplied fresh and either packaged or loose for human consumption ICS: 67.080.2 |
6 | Tshs. 15,000/= USD 15 |
TZS 1277:2010 (1st Ed) EAS 741: 2010 | 2010 | Cassava wheat composite Flour -Specification Specifies the requirements and the methods of sampling and test for cassava - wheat composite flour ICS: 67.080.20 |
5 | TZS 10,000/-USD 10 |
TZS 1276:2010 (1st Ed)- EAS 738: 2010 | 2010 | Fresh Sweet Cassava - Specification Specifies requirements and methods of sampling and test for varieties of fresh sweet cassava roots, intended for direct human consumption ICS: 67.080.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1275:2010 (1st Ed)- EAS 743: 2010 | 2010 | Cassava Crips - Specification Specifies requirements and methods of sampling and test for crisps made from sweet varieties of cassava ICS: 67.080.20 |
4 | TZS 10,000/-USD 10 |
TZS 1274: 2018 (2nd Ed) | 2018 | Packaging - Metal crown closure for glass bottles - specification Specifies requirements, design and material, manufacturing, sampling and test procedures for intermediate metal crown closures for aerated and non- aerated glass bottles ICS: 55.100 |
12 | Tshs. 20,000/= USD 20 |
TZS 1273: 2010 (1st Ed) | 2010 | Pressure sensitive plastic film tape - Specification Specifies pressure sensitive adhesive synthetic plastic tapes for use in packaging sealing and other similar purposes ICS: 83.180 |
9 | Tshs. 15,000/= USD 15 |
TZS 1272: 2010 | 2010 | Pressure sensitive adhesive polypropylene tapes for packaging Specifies pressure sensitive adhesive polypropylene tapes for packaging and sealing ICS: 83.180 |
7 | Tshs. 15,000/= USD 15 |
TZS 1271: 2010 | 2010 | Protective polyvinyl chloride tapes – Specification Specifies protective polyvinyl chloride tapes, which are used for preservation of iron pipes, iron bar and metal products ICS: 83.080 |
7 | Tshs. 15,000/= USD 15 |
TZS 1263-3: 2010 (1st Ed) | 2010 | Textiles- Woven bags from natural fibres- Specification Part 3: Woven bags for Sugar Specifies minimum requirements and other particulars of natural fibre bags made from jute, cotton or kenaf for the packaging of sugar ICS 55.080 |
9 | Tshs. 15,000/= USD 15 |
TZS 1263-2: 2010 (1st Ed) | 2010 | Textiles - Woven bags from natural fibres - Specification Part 2): Bags for milled products Specifies the bag and making-up requirements for woven bags made from natural fibres (excluding sisal) for packing and storage of milled products ICS: 55.080 |
4 | TZS 10,000/-USD 10 |
TZS 1263-1: 2010 (1st Ed) | 2010 | Textiles - Woven bags from natural fibres - Specification Part 1: Bags for cereals Specifies the constructional and performance requirements of woven bags made from natural fibres excluding sisal to contain 90 kg load of any type of cereal or pulses. It also prescribes the ICS 55.080 |
7 | Tshs. 15,000/= USD 15 |
TZS 1261: 2010 (1st Ed)- ISO 7887: 1994 | 2010 | Water quality - Examination and determination of colour Specifies three methods for the examination of colour ICS 13.060.40 |
8 | Tshs. 15,000/= USD 15 |
TZS 1260: 2010(1st Ed) ISO 9965: 1993 | 2010 | Water quality - Determination of selenium Atomic absorption spectrometric method (hydride technique) Specifies a method for the determination of selenium and organically bonded selenium in drinking waters, ground waters and surface waters, in concentration of 1ug/1 and 10ug/1. Higher concen ICS: 13.060.50 |
5 | TZS 10,000/-USD 10 |
TZS 1259:2010- ISO 9377-2: 2000 | 2010 | Water quality- Determination of hydrocarbon oil index- Part 2: method using solvent extraction and gas chromatography Specifies a method for the determination of the hydrocarbon oil index in waters by means of gas chromatography. The method is suitable for surface water, waste water and water from sewage tr ICS: 13.060.50 |
19 | Tshs 25,000/= USD 25 |
TZS 1257: 2017 | 2017 | Textiles – Specification for open mouth woven poly-sacks made from polypropylene tape- yarns Specifies minimum requirements for materials, dimensions, and performance of open mouth poly-sack manufactured from plain woven fabric produced from polypropylene ICS 55.080 |
5 | TZS 10,000/-USD 10 |
TZS 1256:2010 (1st Ed) | 2010 | Non - Cereal Based Alcoholic Beverage - Specification Specifies requirements and methods of sampling and test for non-cereal based alcoholic beverages, produced by fermentation of soluble extracts of non-cereal ingredients. The standard does n ICS 67.160.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1252: 2010 (1st Ed) | 2010 | Stainless steel needle tubing for manufacture of medical device Specifies the dimensions, surface and mechanical properties of normal and thin- walled tubing of designated metric sizes 0.3 mm to 3.4 mm and of extra- thin-walled tubing of designed metric ICS: 77.140.20 |
11 | Tshs. 20,000/= USD 20 |
TZS 1251: 2010 (1st Ed)- ISO 6357: 1985 | 2010 | Documentation- spine titles on books and other publications Establishes rules for general layout (position and orientation) and use of spine tiles and corresponding text used on books, serial publications, periodicals, reports and other forms of docu ICS: 01.140.40 |
3 | TZS 10,000/-USD 10 |
TZS 1986: 2017 | 2017 | Dehydrated onions — Specification Specifies requirements and methods of sampling and test for dehydrated onion (Allium cepa L.) without any bleaching or precooking and intended for human consumption. ICS: 67.080.20, |
8 | TSHS 15,000/= USD 15 |
TZS 1991: 2017 | 2017 | Fortified rice-soy for infants and young children — Specification Specifies requirements and methods of sampling and test for fortified rice soy blend products intended for feeding infants and young children as a complementary food. ICS: 67.060 |
7 | TSHS 15,000/= USD 15 |
TZS 1992: 2017 | 2017 | Moringa powder — Specification Specifies requirements, methods of sampling and test for Moringa powder that has been processed in the form of functional ingredient for human consumption. ICS: 67.060 |
4 | TSHS 10,000/= USD 10 |
TZS 1993: 2017 | 2017 | Infant formula and adult nutritionals — Methods of tests — Determination of vitamin B3 (Niacin) by high performance liquid chromatography (HPLC) Specifies a method for the determination of the mass fraction of niacin in foodstuffs by high performance liquid chromatography (HPLC) by three different ways of hydrolysis, acid hydrolysis ICS: 67.050 |
6 | TSHS 15,000/= USD 15 |
TZS 1995: 2017 ISO 20634: 2015 | 2017 | Infant formula and adult nutritionals — Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC) Specifies a method for the quantitative determination of vitamin B12 in infant and adult formula (powders, ready-to-feed liquids and liquid concentrates) by reversed phase high performance l ICS: 67.050 |
14 | TSHS 20,000/= USD 20 |
TZS 1994: 2017 ISO 20633: 2015 | 2017 | Infant formula and adult nutritionals — Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography Specifies a method for the simultaneous quantitative determination of vitamin E (α-tocopherol and α-tocopheryl acetate) and vitamin A (13-cis and all-trans isomers of retinyl palmitate and r ICS: 67.050 |
23 | TSHS 30,000/= USD 30 |
TZS 1250: 2017 (1st Ed) -ISO11800: 1998 | 2017 | Information and documentation- requirements for binding materials and methods used in the manufacture of books Specifies manufacturing methods and material that will result in durable hard cover and soft cover binding for books manufacture in commercial qualities. It does not apply to hand bookbindin ICS 01.140.40 |
21 | Tshs 30,000/= USD 30 |
TZS 1249: 2018 (2nd Ed) | 2018 | Paper napkins/serviettes — Specification Specifies the requirements and test methods of sampling and test for paper napkins/serviettes ICS: 85.080 |
6 | Tshs. 15,000/= USD 15 |
TZS 1247:2012(1st Ed) | 2012 | Fuel additives – Specification Specifies fuel additives for gasoline (petrol) and/or gas oil (diesel) only ICS: 75.160.20 |
10 | Tshs 15,000/= USD 15 |
TZS 1245:2010 (1st Ed) | 2010 | Draught Beer- Specification Specifies requirements and methods of sampling and test draught beer ICS: 67.160.10 |
8 | Tshs. 15,000/= USD 15 |
TZS 1244: 2010 (1st Ed) | 2010 | Pasteurized ulanzi Bamboo Alcoholic drink-Specification Specifies requirements and methods of sampling and test for pasteurized ulanzi (bamboo alcoholic drink) ICS: 67.160.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1236:2014 | 2014 | Group of cheeses in brine (Feta) — Specification Specifies requirements, methods of test and sampling for cheeses in brine (Feta) intended for direct consumption or for further processing ICS: 67.100.30 |
4 | TZS 10,000/-USD 10 |
TZS 1235: 2010 (1st Ed) ISO 559:1991 | 2010 | Steel tubes for water and sewage Specifies the technical condition for delivery of seamless and welded steel tubes for the conveyance of water and sewage at temperatures between 10oC and 120oC ICS: 77.140.75 |
14 | Tshs. 20,000/= USD 20 |
TZS 1234:2010(2nd Ed) | 2010 | Tolerance limits for industrial effluents discharged into inland surface water - Textile industry Lays down the tolerance limits for effluents from textile industry discharged into water bodies ICS: 13.060.30 |
5 | TZS 10,000/-USD 10 |
TZS 1233: 2010 (1st Ed) | 2010 | Tolerance limits for industrial effluents discharged into inland surface water-sugar industry Lays down the tolerance limits for effluents from sugar industry discharged into water bodies ICS: 13.060.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1232: 2010 (1st Ed) | 2010 | Plastic monobloc chairs- Specification Sets out requirement for the evaluation and selection of plastic monobloc chairs for adults, but does not include chairs intended for bathroom use. It specifies minimum requirement for stren ICS: 83.140.01 |
46 | Tshs 55,000/= USD 55 |
TZS 1231 (Part 2): 2010 (1st Ed) | 2010 | Motor cycles for general use – Part 2: Specification for three wheeled motorcycles Specifies safety related performance characteristics of three wheeled motor cycles having one wheel in front and two wheels in the rear ICS: 43.140 |
14 | Tshs. 20,000/= USD 20 |
TZS 1231 (Part 1): 2010 (1st Ed) | 2010 | Motor cycles for general use – Part 1: Specification for two wheeled motorcycles Specifies the safety related performance characteristics of the two wheeled motor cycles. It covers the mopeds as motor cycles without considering ICS: 43.140 |
11 | Tshs. 20,000/= USD 20 |
TZS 1230 (Part 2):2010 (1st Ed) | 2010 | Textiles - Specification for mosquito nets -Part 2: Net from100% polyethylene yarn Prescribes the requirements of two types of mosquito nets namely rectangular mosquito nets and circular or conical shaped mosquito nets. Theses may be bleached or dyed as specified ICS: 97.160 |
14 | Tshs. 20,000/= USD 20 |
TZS 1230 (Part 1): 2010 (1st Ed) | 2010 | Textiles - Specification for mosquito nets -Part 1: Net from100% polyester yarn Prescribes the requirements of two types of mosquito net namely rectangular mosquito nets and circular shaped mosquito nets. These may be bleached or dyed as specified in the contract or ord ICS: 97.160 |
8 | Tshs. 15,000/= USD 15 |
TZS 1227: 2012 (1st Ed) | 2012 | PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300V Specifies construction requirement and. test methods for PVC insulated amoured cables of rated voltages 60 0/1 000 V and 1 900/3 30 0V. It intended for use in fixed installations in industri ICS: 29.060.20 |
40 | Tshs 50,000/= USD 50 |
TZS 1225:2013(1st Ed) | 2013 | Mozzarella cheese- Speciation Specifies requirements, methods of test and sampling for Mozzarella cheese intended for direct consumption or further processing ICS: 67.100.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 1224:2010 (1st Ed) | 2010 | Textiles - Disposable baby diapers- Specification Specifies the requirement for disposable baby diapers ICS: 59.080.30 |
8 | Tshs. 15,000/= USD 15 |
TZS 1213:2016 | 2016 | Cream cheese — Specification Prescribes requirements, methods of sampling and test for cream cheese intended for human consumption ICS. 67.100.30 |
8 | Tshs. 15,000/= USD 15 |
TZS 1211:2014 | 2014 | Cottage cheese — Specification Specifies requirements, methods of test and sampling for Cottage cheese intended for direct consumption or for further processing ICS. 67.100.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 1210:2017 (2nd Ed.) | 2017 | Provolone cheese - Specification Specifies requirements, methods of test and sampling for Provolone cheese intended for human consumption ICS. 67.100.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 1207:2017 (1st Ed.) | 2017 | Emmental cheese - Specification Specifies requirements, methods of sampling and test for Emmental cheese intended for human consumption ICS. 67.100.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 1205:2017 (1st Ed) | 2017 | Havarti cheese - Specification Specifies requirements, methods of sampling and test for Havarti cheese intended for human consumption ICS. 67.100.10 |
6 | Tshs. 15,000/= USD 15 |
TZS 1202:2017 (1st Ed) | 2017 | Danbo cheese - Specification Specifies requirements, methods of sampling and test for Danbo cheese intended for human consumption ICS. 67.100.30 |
6 | Tshs. 15,000/= USD 15 |
TZS 1201:2014 | 2014 | Gouda cheese — Specification Specifies requirements, methods of test and sampling for Gouda cheese intended for direct consumption or for further processing ICS: 67.100.30 |
5 | TZS 10,000/-USD 10 |
TZS 1199-21:2015 | 2015 | Methods of sampling and test for Crude and refined glycerine Part 21: Determination of saponification equivalent Describes a titrimetric method for the determination of the saponification equivalent of crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-20:2015 | 2015 | Methods of sampling and test for Crude and refined glycerine Part 20: Test for reducing substances Describes a method for the detection of reducing substances in crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-19:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 19: Assessment of odour Describes a method for assessing the odour of crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-18:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 18: Detection of sugars Describes a colorimetric method for detecting the presence of sugars in crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-17:2015. | 2015 | Methods of sampling and test for crude and refined glycerine Part 17: Determination of lead content Describes a colorimetric limit test for lead in crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-15:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 15: Determination of heavy metals content Describes a method for determining the heavy metal content of crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-14:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 14\: Limit test for organic chloride Describes a turbidimetric limit test for organic chloride in crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-13:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 13: Limit test for chloride Describes a turbidimetric limit test for chloride in crude and refined glycerol ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1099-10:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 10\: Determination of arsenic content\: Silver diethyldithiocarbamate method Specifies a silver diethyldithiocarbamate photometric method for the determination of the arsenic content of glycerols for industrial use ICS: 71.080.01 |
5 | Tshs 10,000/= USD 10 |
TZS 1199-7:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 7\: Determination of sulphated ash — Gravimetric method Specifies a gravimetric method for determining sulphated ash deriving from glycerines for industrial use. The method is applicable to products yielding a quantity of sulphated ash less than ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-5:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 5\: Determination of alkalinity and acidity — Volumetric method Specifies a titrimetric method for the determination of the alkalinity or acidity of glycerines for industrial use ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1199-4:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 4\: Determination of density and relative density Specifies methods for the determination of the density at 20 °C of purified glycerol (i.e. free from substances in suspension and crystallized salts) for industrial use. A choice of two pykn ICS: 71.080.01 |
8 | Tshs. 15,000/= USD 15 |
TZS 1199-3:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 3\: Determination of glycerol content Describes a method for the determination of the glycerol content of crude, technical, dynamite grade double-distilled and chemically pure glycerols. Other polyhydric alcohols with three or m ICS: 71.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 1199-2:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 2\: Methods of sampling Describes methods for sampling quantities of glycerine, either crude or refined, for industrial use, in the course of filing (see clause 4), or already contained in drums (see clause 5) or i ICS: 71.080.01 |
11 | Tshs. 20,000/= USD 20 |
TZS 1199-1:2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 1: Samples and test methods — General Provides general prescriptions relative to the treatment of samples and to the test methods for glycerines for industrial use ICS: 71.080.01 |
2 | TZS 10,000/-USD 10 |
TZS 1198:2015 | 2015 | Chemically pure (CP) glycerine —Specification Prescribes the requirements and methods of sampling and testing for chemically pure glycerine ICS: 71.100 |
6 | Tshs. 15,000/= USD 15 |
TZS 1196: 2015 | 2015 | Guava juice — Specification Prescribes requirements and methods of sampling and tests for guava juice CS: 67.160.20 |
5 | TZS 10,000/-USD 10 |
TZS 1194: 2015 | 2015 | Apple juice — Specification Specifies the requirements and methods of sampling and tests for apple juice extracted from an apple fruit Malus domestica Borkh (synonymous Pyrus malus (L). intended for direct human consum ICS: 67.160.20 |
5 | TZS 10,000/-USD 10 |
TZS 1193: 2018 (2nd Ed) EN 520:2004+A1 | 2018 | Gypsum plasterboards — Definition, requirements and tests method (Ed 2) Specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It i ICS: 91.100.10 |
54 | Tshs 60,000/= USD 60 |
TZS 1192: 2018 (2nd Ed) | 2018 | Roselle Alcoholic drink - Specification Specifies requirements and methods of sampling and tests for roselle alcoholic drink, produced by fermentation of a sugar added extract of dried rosellecalyces mash, by yeasts ICS: 67.160.10 |
5 | TZS 10,000/-USD 10 |
TZS 1191:2017 (2nd Ed) | 2017 | Roselle Non Alcoholic drink- Specification Specifies requirements and methods of sampling and tests for rosellenon alcoholic drink; intended for direct human consumption without dilution ICS: 67.160.20 |
5 | TZS 10,000/-USD 10 |
TZS 1892: 2016 ISO 1518-1: 2011 | 2016 | Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method Specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching w ICS: 87.040 |
7 | TSHS 15,000/= USD 15 |
TZS 1891: 2016 ISO 4628-2: 2003 | 2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of Describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards. The pictorial standards provided in this part of ISO 4628 illustrate blisters in ICS 87.040 |
12 | TSHS 20,000/= USD 20 |
TZS 1890: 2016 ISO 15528: 2013 | 2016 | Paints, varnishes and raw materials for paints and varnishes — Sampling Specifies procedures for the sampling of paints, varnishes and raw materials used in their manufacture. Such products include liquids and materials which, without undergoing chemical modific ICS: 87.040 |
12 | TSHS 20,000/= USD 20 |
TZS 1889: 2016 ISO 4630-1: 2004 | 2016 | Clear liquids — Estimation of colour by the Gardner colour scale — Part 1: Visual method. Specifies a method for estimating, by means of the Gardner colour scale, the colour of clear, yellow/brown liquid products using colour-measuring instruments. The results might be invalid if ICS: 87.060.20 |
7 | TSHS 15,000/= USD 15 |
TZS 1888: 2016 ISO 11998: 2006 | 2016 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings The ability of coatings to withstand wear caused by repeated cleaning operations and to withstand penetration by soiling agents is an important consideration both from a practical point of v ICS: 87.040 |
11 | TSHS 20,000/= USD 20 |
TZS 1887: 2016 ISO 1516: 2002 | 2016 | Determination of flash/no flash — Closed cup equilibrium method Specifies a method to determine if paints, varnishes, paint binders, solvents, petroleum or related products, when maintained at a selected equilibrium temperature and under the conditions o ICS: 87.040 |
9 | TSHS 15,000/= USD 15 |
TZS 1886-4: 2016 ISO 2811-4: 2011 | 2016 | Paints and varnishes — Determination of density — Part 4: Pressure cup method. Specifies a method for determining the density of paints, varnishes and related products using a pressure cup. The method is suitable for products which are aerated. Emulsion paints, for ex ICS: 87.040 |
8 | TSHS 15,000/= USD 15 |
TZS 1886-1: 2016 ISO 2812-1: 2007 | 2016 | Paints and varnishes Determination of resistance to liquids — Part 1: Immersion in liquids other than water. Specifies general methods for determining the resistance of an individual-layer or multilayer system of coating materials to the effects of liquids, other than water, or paste-like products ICS: 87.040 |
7 | TSHS 15,000/= USD 15 |
TZS 1885: 2016 | 2016 | Paints and varnishes — Spraying properties of paints Specifies a method for assessing spray application properties and the flow characteristics of paints when the paints are applied over relatively large areas. It can also be used to assess ot ICS: 87.040 |
4 | TSHS 10,000/= USD 10 |
TZS 1884: 2016 | 2016 | Alkali resistant plaster primer (latex-type) — Specification Covers a latex-type of alkali-resistant plaster primer for interior and exterior use on dry cement plaster and concrete, unglazed brick, gypsum surfaces, fibre-cement boards and other compre ICS: 87.040 |
9 | TSHS 15,000/= USD 15 |
TZS 1883: 2016 | 2016 | Mineral solvents for paints and related products — Specification Specifies the requirements for two categories of mineral solvents for use in paints and varnishes and for other purposes, as follows: Type A, having an aromatic content below 25 % (v/v) Ty ICS: 87.060.30 |
3 | TSHS 10,000/= USD 10 |
TZS 1882: 2016 | 2016 | Solvent based paint remover — Specification Prescribes the requirements and the methods of sampling and test for solvent based paint remover. The paint removers are intended for general use on surfaces of painted, varnished or lacquer ICS: 87.040 |
13 | TSHS 20,000/= USD 20 |
TZS 1794:2016 ISO 14341:2010 | 2016 | Welding consumables – Wire electrodes and weld deposits gas shield metal arc welding of non- alloy and fine grain steels – Classification. Specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of no ICS: 25.160.20 |
10 | TSHS 15,000/= USD 15 |
TZS 1793:2016. ISO 2560:2009 | 2016 | Welding consumables – Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification. Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non ICS: 25.160.20 |
41 | TSHS 50,000/= USD 50 |
TZS 1792:2016. ISO 23551-3:2005 | 2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Gas/air ratio controls, pneumatic type. Specifies the safety, construction and performance requirements for gas/air ratio controls, pneumatic type (hereafter referred to as “ratio control”), for inlet pressures up to and including ICS: 27.060.20 |
10 | TSHS 15,000/= USD 15 |
TZS 1791:2016. ISO 23551-1:2012 | 2016 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements – Part 1: Automatic and semi-automatic valves. Specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use. ICS: 27.060.20 |
37 | TSHS 45,000/= USD 45 |
TZS 1790:2016. ISO 23550:2011 | 2016 | Safety and control devices for gas burners and gas-burning appliances - General requirements. Specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings (hereafter referred to as controls) for burne ICS: 27.060.20 |
41 | TSHS 50,000/= USD 50 |
TZS 1789: 2016 | 2016 | Code of hygienic practices for sprouts production Covers the hygienic practices that are specific for the primary production of seeds for sprouting and the production of safe and quality sprouts for human consumption. ICS: 67.020 |
15 | TSHS 20,000/= USD 20 |
TZS 1788: 2016 | 2016 | Breadfruit — Specification Specifies requirements and method of sampling and test for breadfruit (Artocarpus altilis of the family Moraceae,) to be supplied fresh to the consumer, after preparation and packaging and f ICS: 67.080.20 |
7 | TSHS 15,000/= USD 15 |
TZS 1787: 2016 | 2016 | Fresh jackfruit — Specification Applies to varieties of jackfruit grown from Artocarpus heterophyllus Lamarck of the family Moraceae, to be supplied fresh to the consumer, after preparation and packaging and for industrial ICS: 67.080.01 |
6 | TSHS 15,000/= USD 15 |
TZS 1786: 2016 | 2016 | Fresh okra — Specification and grading Specifies requirements and method of sampling of okra of varieties (cultivars) grown from Abelmoschuss esculentus L. Moench of Malvaceae family to be supplied fresh to the consumer. The stan ICS: 67.080 |
5 | TSHS 10,000/= USD 10 |
TZS 1785: 2016 | 2016 | Protection against non-ionizing radiation — limits to human exposure to electric, magnetic and electromagnetic fields up to 300GHz Provides exposure limits to protect human against adverse effects caused by electric, magnetic and electromagnetic fields up to 300 GHz. ICS: 13.280 |
11 | TSHS 20,000/= USD 20 |
TZS 1784: 2016 | 2016 | Protection against thermal stress — Occupational exposure limits for hot environments Prescribes the exposure limits designed to protect occupational workers in hot environment against thermal induced healtheffects. ICS: 13.020.01 |
7 | TSHS 15,000/= USD 15 |
TZS 1783: 2016. EAS 817: 2015 | 2016 | Stain remover for tableware — Specification Specifies the requirements and methods of test for a stain remover used in hard or soft water to remove coffee tea and other adsorbed food stains, primarily from plastic tableware, by immers ICS: 71.100.40 |
11 | TSHS 20,000/= USD 20 |
TZS 1782-2: 2016. EAS 816-2: 2015 | 2016 | Synthetic liquid laundry detergents — Specification — Part 2: Machine wash Specifies the requirements and methods of sampling and test for machine wash synthetic liquid laundry detergents. ICS: 71.100.40 |
10 | TSHS 15,000/= USD 15 |
TZS 1782-1: 2016. EAS 816: 2015 | 2016 | Synthetic liquid laundry detergents — Specification — Part 1: Hand wash Specifies the requirements and methods of sampling and test for hand wash synthetic liquid laundry detergents. ICS: 71.100.40 |
8 | TSHS 15,000/= USD 15 |
TZS 1781: 2016. EAS 815: 2015 | 2016 | Soap noodles — Specification Specifies requirements and methods of test for soap noodles used as an intermediate product for subsequent conversion into a marketable soap. ICS: 77.100.40 |
10 | TSHS 15,000/= USD 15 |
TZS 1780: 2016. EAS 814: 2015 | 2016 | Determination of biodegradability of surfactants – Test method Prescribes a method for the determination of biodegradability of surfactants and for assessment of results, for both anionic and non-ionic surfactants. ICS: 71.100.40 |
31 | TSHS 40,000/= USD 40 |
TZS 1779-1: 2016. EAS 812-1: 2015 | 2016 | Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash Specifies the requirements and methods of test for synthetic and combined (soap and synthetic) hand wash. ICS: 71.100.40 |
10 | TSHS 15,000/= USD 15 |
TZS 1778-2: 2016. EAS 127-2:2015 | 2016 | Synthetic detergent powders — Specification Part 2: Machine wash Specifies the requirements and methods of sampling and text for synthetic detergents for machine wash. It does not cover hand wash powders and industrial detergent powders. ICS: 71.100.40 |
14 | TSHS 20,000/= USD 20 |
TZS 1777: 2016 | 2016 | Animal and vegetable fats and oils — Determination of lead by directs graphite furnace atomic absorption spectroscopy. Specifies a method for the determination of trace amounts (> 0,001 mg/kg) of lead in all types of crude or refined edible oils and fats. ICS: 67.200.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1776: 2016 ISO 9832: 2002 | 2016 | Animal and vegetable fats and oils — Determination of residual technical hexane content Specifies a method for the determination of the residual technical hexane content of animal and vegetable fats and oils (referred to as fats hereinafter). ICS: 67.200.10 |
10 | TSHS 15,000/= USD 15 |
TZS 1775: 2016 ISO 5558: 1982 | 2016 | Animal and vegetable fats and oils — Detection and identification of antioxidants — Thin-layer chromatographic method Specifies a thin-layer chromatographic method for the detection and identification of the following antioxidants in animal and vegetable fats and oils ICS: 67.200.10 |
3 | TSHS 10,000/= USD 10 |
TZS 1774: 2016 ISO 18609: 2000 | 2016 | Determination of Unsaponifiable Matter-Method using Hexane Extraction. Specifies a method using three hexane extractions for the determination of the unsaponifiable matter content of animal and vegetable fats and oils. It is applicable to all fats and oils but ICS 67.200.10 |
8 | TSHS 15,000/= USD 15 |
TZS 1773: 2016 | 2016 | Agricultural equipment – Four wheeled tractors – Test methods. Prescribes method for the determination of turbidity in sterilized milk. ICS: 67.100.10 |
2 | TSHS 10,000/= USD 10 |
1582. TZS 1772:2016 | 2016 | Stainless steel wash-hand basins and wash troughs Specification covers material, dimensional and constructional requirements for stainless steel wash-hand basins and wash troughs. ICS: 77.140.01 |
2 | TSHS 10,000/= USD 10 |
TZS 1771: 2016 | 2016 | Flavoured milk — Specification Prescribes requirements, methods of sampling and test for flavoured milk intended for direct consumption. ICS: 67.100.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1770: 2016 | 2016 | Hazard Analysis and Critical Control Point (HACCP) System — Requirements for any organization in the food chain Prescribes the requirements for establishment, implementation and maintenance of a HACCP system as a preventive system so as to ensure safety of the food. It is applicable to any organizatio ICS: 67.020, |
17 | TSHS 25,000/= USD 25 |
TZS 1769: 2016 | 2016 | Coconut milk and coconut cream — Specification Prescribes the require¬ments and sampling and test methods for packaged aqueous coconut milk and coconut cream products for direct human consumption. ICS: 67.200.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1767: 2016 EAS 825: 2014 | 2016 | Groundnut seed — Requirements for certification Specifies the certification requirements for the production of pre-basic, basic and certified seed of groundnut (Arachis hypogaea L.). It includes requirements for eligible varieties, field ICS: 65.020.20 |
17 | TSHS 25,000/= USD 25 |
TZS 1766: 2016 EAS 824: 2014 | 2016 | Soybean seed — Requirements for certification. Specifies the certification requirements for the production of pre-basic, basic and certified seed of soybean (Glycine max(L.) Merrill). It includes requirements for eligible varieties, fiel ICS: 65.020.20 |
16 | TSHS 25,000/= USD 25 |
TZS 1765: 2016 EAS 823: 2014 | 2016 | Sunflower seed — Requirements for certification Specifies the certification requirements for the production of pre-basic, basic and certified seed of sunflower (Helianthus annuus L.). It includes requirements for eligible varieties, field ICS: 65.020.20 |
18 | TSHS 25,000/= USD 25 |
TZS 1764:2016 EAS 822: 2014 | 2016 | Sorghum seed — Requirements for certification This East African Standard specifies the certification requirements for the production of pre-basic, basic and certified seed of sorghum (Sorghum bicolor (L.) Moench). It includes requiremen ICS: 65.020.20 |
17 | TSHS 25,000/= USD 25 |
TZS 1763: 2016 EAS 821: 2014 | 2016 | Maize seed — Requirements for certification Specifies the certification requirements for the production of pre-basic, basic and certified seed of maize (Zea mays L.). It includes requirements for eligible varieties, field standards, f ICS: 65.020.20 |
18 | TSHS 25,000/= USD 25 |
TZS 1758: 2016 | 2016 | Data elements and interchange formats — Information interchange — Representation of dates and times. Applicable whenever representation of dates in the Gregorian calendar, times in the 24-hour timekeeping system, time intervals and recurring time intervals or of the formats of these represe ICS: 01.140.30 |
33 | TSHS 40,000/= USD 40 |
TZS 1881: 2016 | 2016 | Bituminous paint for cold application excluding use in contact with potable water — Specification Specifies requirements and method of sampling and test for a range of bitumen-based solvent-borne paints. It covers paints for cold application by either brushing, spraying, rolling or dippi ICS: 87.040 |
10 | TSHS 15,000/= USD 15 |
TZS 1880: 2016 | 2016 | Priming paints for steel — Specification Describes the requirements and the methods of sampling and test for priming paint for steel structure. It covers two types of primer, the one comprising of barrier protection primer intended ICS: 87.040 |
6 | TSHS 15,000/= USD 15 |
TZS 1879: 2016 | 2016 | Varnish for interior use — Specification Specifies requirements and methods of sampling and test for varnish for interior use. It covers two types of varnishes for interior use on wooden surfaces: Type I: General purpose glossy, ICS: 87.040 |
12 | TSHS 20,000/= USD 20 |
TZS 1878: 2016 | 2016 | Household plastic ware — Specification Specifies the requirements, methods of sampling and test for compression and injection-moulded plastic cups, tumblers, mugs, plates, saucers, trays, bowls and other similar wares (other than ICS: 83.080.01 |
16 | TSHS 25,000/= USD 25 |
TZS 1877–2: 2016 | 2016 | Plastic container — Specification — Part 2: Basin Specifies the requirements, sampling and method of test for basins made from polyolefin for domestic purposes ICS: 83.080.01 |
6 | TSHS 15,000/= USD 15 |
TZS 1877–1: 2016 | 2016 | Plastic container — Specification — Part 1: Bucket Specifies requirements, sampling and method of test for buckets with volume up to and including 20 L made from thermoplastic materials for domestic purposes. ICS: 83.080.01 |
10 | TSHS 15,000/= USD 15 |
TZS 1877–1: 2016 | 2016 | Plastic container — Specification — Part 1: Bucket Specifies requirements, sampling and method of test for buckets with volume up to and including 20 L made from thermoplastic materials for domestic purposes. ICS: 83.080.01 |
10 | TSHS 15,000/= USD 15 |
TZS 1876: 2016 ISO 472: 2013 | 2016 | Plastics — Vocabulary Defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all a ICS: 83.080.01 |
131 | TSHS 140,000/= USD 140 |
TZS 1875-2: 2016 | 2016 | Thermoplastic dustbin and lids — Specification — Part 2: Plastic and rubber dustbin lid Specifies requirements for dustbin lids manufactured from polymeric compound of thermoplastics or rubber or a combination of both, suitable for use with dustbins which comply with TZS 1875–1 ICS: 83.080.20 |
5 | TSHS 10,000/= USD 10 |
TZS 1875-1: 2016 | 2016 | Thermoplastic dustbin and lid — Specification — Part 1: Dustbin Specifies requirements, performance and test methods for both rotational and injection moulded thermoplastic dustbins (excluding lids) for use with normal household refuse, except hot ashes, ICS: 83.080.20 |
14 | TSHS 20,000/= USD 20 |
TZS 1874: 2016 | 2016 | Plastic drinking straw — Specification Specifies the requirements, methods of sampling and test for plastic drinking straws. ICS: 83.080.01 |
4 | TSHS 10,000/= USD 10 |
TTZS 1873-1: 2016 ISO 15681-1: 2003 | 2016 | Water quality — Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) — Part 1: Method by flow injection analysis (FIA) Specifies flow injection analysis (FIA) methods for the determination of orthophosphate in the mass concentration range from 0,01 mg/l to 1,0 mg/l (P), and total phosphorus by manual digesti ICS: 13.060.50 |
17 | TSHS 25,000/= USD 25 |
TZS 1872: 2016 ISO 28540: 2011 | 2016 | Water quality — Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water — Method using gas chromatography with mass spectrometric detection (GC-MS) Specifies a method for the determination of at least 16 selected PAH (see Table 1) in drinking water and ground water in mass concentrations above 0,005 μg/l and in surface water in mass con ICS: 13.060.50 |
27 | TSHS 35,000/= USD 35 |
TZS 1871: 2016 ISO 10566: 1994 | 2016 | Water quality — Determination of aluminium — Spectrometric method using pyrocatechol violet Applicable to the analysis of potable waters, ground waters and lightly polluted surface and sea waters. ICS: 13.060.50 |
5 | TSHS 10,000/= USD 10 |
TZS 1870: 2016 ISO 15061: 2001 | 2016 | Water quality — Determination of dissolved bromate — Method by liquid chromatography of ions specifies a method for the determination of dissolved bromate in water (e.g. drinking water, raw water, surface water, partially treated water or swimming pool water). Appropriate pretreatme ICS: 13.060.50 |
21 | TSHS 30,000/= USD 30 |
TZS 1869-1: 2016 ISO 9964-1: 1993 | 2016 | Water quality — Determination of sodium and potassium — Part 1: Determination of sodium by atomic absorption spectrometry Specifies a method for the determination of dissolved sodium by flame atomic absorption spectrometry (AAS). It is intended for the analysis of raw and drinking water. The method is applicabl ICS: 13.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 1868: 2016 ISO 9697: 2015 | 2016 | Water quality — Measurement of gross beta activity in non-saline water — Thick source method Specifies a test method for the determination of grass beta activity concentration in non-saline waters. The method covers non-volatile radionuclides with maximum beta energies of approximat ICS: 13.060.01 |
11 | TSHS 20,000/= USD 20 |
TZS 1867: 2016 ISO 9696: 2007 | 2016 | Water quality — Measurement of gross alpha activity in non-saline water — Thick source method Specifies a method for the determination of gross alpha activity in non- saline water for alpha-emitting radionuclides which are not volatile at 350 0C. It is possible to determine supported ICS: 13.060.60 |
11 | TSHS 20,000/= USD 20 |
TZS 1866: 2016 ISO 9390: 1990 | 2016 | Water quality — Determination of borate — Spectrometric method using azomethine-H Specifies a spectrometric method for the determination of borate in water. The method is applicable to the determination of borate in concentrations between 0, 01 mg and 1 mg of boron per li ICS: 13.060.01 |
4 | TSHS 10,000/= USD 10 |
TZS 1865: 2016 ISO 9297: 1989 | 2016 | Water quality — Determination of chloride ━ Silver nitrate titration with chromate indicator (Mohr’s method) Specifies a titration method for the determination of dissolved chloride in water. The method is applicable to the direct determination of dissolved chloride in concentrations between 5 mg/I ICS: 13.060.01 |
4 | TSHS 10,000/= USD 10 |
TZS 1864: 2016 ISO 9174: 1990 | 2016 | Water quality — Determination of chromium — Atomic absorption spectrometric methods Specifies two methods for the determination of total chromium in water by atomic absorption spectrometry. The two methods are covered in separate sections as follows. ICS: 13.060.01 |
5 | TSHS 10,000/= USD 10 |
TZS 1863: 2016 ISO 8288: 1986 | 2016 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods Specifies three methods for the determination of cobalt. Nickel, copper, zinc, cadmium and lead in water by flame atomic absorption spectrometry. ICS: 13.060.50 |
6 | TSHS 15,000/= USD 15 |
TZS 1862: 2016 ISO 8245: 1999 | 2016 | Water quality — Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) Guidance for the determination of total carbon (TC), total inorganic carbon (TIC) and total organic carbon (TOC) in drinking water, ground water, surface water, sea water and waste water. It ICS: 13.060.50 |
11 | TSHS 20,000/= USD 20 |
TZS 1861-1: 2016 ISO 8165-1: 1992 | 2016 | Water quality — Determination of selected monovalent phenols — Part 1: Gas-chromatographic method after enrichment by extraction Specifies a method for the determination of the phenols presented in table 1 in a concentration range from 0, 1 µg/I to 1 mg/I. The concentration range depends on the nature of the phenols t ICS: 13.060.01 |
7 | TSHS 15,000/= USD 15 |
TZS 1860: 2016 ISO 7980: 1986 | 2016 | Water quality — Determination of calcium and magnesium —Atomic absorption spectrometric method Specifies a method for the determination of dissolved calcium and magnesium by flame atomic absorption spectrometry. It is intended for the analysis of raw and drinking waters and can be use ICS: 13.060.01 |
3 | TSHS 10,000/= USD 10 |
TZS 1859-3: 2016 ISO 7890: 1988 | 2016 | Water quality — Determination of nitrate — Part 3: Spectrometric method using sulfosalicylic acid Specifies a method for the determination of nitrate ion in water. ICS: 13.060.01 |
4 | TSHS 10,000/= USD 10 |
TZS 1858: 2016 ISO 7888: 1985 | 2016 | Water quality — Determination of electrical conductivity Specifies a method for the measurement of the electrical conductivity of all types of water. ICS: 13.060.01 |
6 | TSHS 15,000/= USD 15 |
TZS 1854: 2016 ISO 16265: 2009 | 2016 | Water quality — Determination of the methylene blue active substances (MBAS) index — Method using continuous flow analysis (CFA) Specifies a procedure for the determination of the methylene blue active substances (MBAS) index, in the ranges 0,05 mg/I to 0,5 mg/I and 0,5mg/I to5,0mg/I, in various water samples (e.g. gr ICS: 13.060.50 |
20 | TSHS 25,000/= USD 25 |
TZS 1853: 2016 ISO 15089: 2000 | 2016 | Water quality — Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents Specifies a guide for the selective quantitative analysis by immunoassays of environmental chemicals such as pesticides (including insecticides) or either metabolites in drinking, ground and ICS: 13.060.50 |
11 | TSHS 20,000/= USD 20 |
TZS 1852: 2016 ISO 14911: 1998 | 2016 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water specifies a method for the determination of the dissolved cations Li+, Na+, nh4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ in water (e.g. drinking water, surface water, waste water). ICS: 13.060.01 |
16 | TSHS 25,000/= USD 25 |
TZS 1851: 2016 ISO 14402: 1999 | 2016 | Water quality — Determination of phenol index by flow analysis (FIA and CFA) Specifies two methods for the determination of the phenol index in waters of different origin (such as ground waters, surface waters, seep waters, and waste waters) in mass concentrations of ICS: 13.060.50 |
16 | TSHS 25,000/= USD 25 |
TZS 1850: 2016 ISO 12846: 2012 | 2016 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment Specifies two methods for the determination of mercury in drinking, surface, ground, rain and waste water after appropriate pre-digestion. For the first method (described in clause6), an enr ICS: 13.060.50 |
11 | TSHS 20,000/= USD 20 |
TZS 1849: 2016 ISO 12020: 1997 | 2016 | Water quality — Determination of aluminum ━ Atomic absorption spectrometric methods Describes two atomic absorptions spectrometric (AAS) methods for the determination of aluminum in water. ICS: 13.060.01 |
10 | TSHS 15,000/= USD 15 |
TZS 1848: 2016 ISO 11969: 1996 | 2016 | Water quality — Determination of arsenic — Atomic absorption spectrometric method (hydride technique) Specifies method for the determination of arsenic including organically bound arsenic in drinking waters, ground waters and surface waters, in a concentration range from 1 µ/I to 10 µg/I. ICS: 13.060.01 |
8 | TSHS 15,000/= USD 15 |
TZS 1847: 2016 ISO 11885: 2007 | 2016 | Water quality — Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Specifies a method for the determination of dissolved elements, elements bound to particles ( particulate) and total content of elements in different in different types of water (e.g. ground ICS: 13.060.50 |
28 | TSHS 35,000/= USD 35 |
TZS 1846: 2016 ISO 11732: 2005 | 2016 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection Specifies methods suitable for the determination of ammonium nitrogen in various types of water (such as ground, drinking, surface, and wasters) in mass concentrations ranging from 0,1 mg/I ICS: 13.060.50 |
18 | TSHS 25,000/= USD 25 |
TZS 1845: 2016 ISO 11423: 1997 | 2016 | Water quality — Determination of benzene and some derivatives Described is applicable to the determination of benzene, methylbenzene (toluene), dimethyl benzenes (xylenes) and ethylbenzene (abbreviated hereafter to BTX) in homogeneous samples of water ICS: 13.060.50 |
17 | TSHS 25,000/= USD 25 |
TZS 1844: 2016 ISO 10523: 2008 | 2016 | Water quality — Determination of pH Specifies a method for determining the PH value in rain, drinking and mineral waters, bathing waters, surface and ground waters, as well as municipal and industrial waste waters, and liquid ICS: 13.060.01 |
13 | TSHS 20,000/= USD 20 |
TZS 1843: 2016 ISO 10359: 1992 | 2016 | Water quality — Determination of fluoride Specifies a method for the determination of dissolved fluoride in fresh, potable and low contaminated water, and some surface waters, using an electrochemical technique. The method is direct ICS: 13.060.01 |
6 | TSHS 15,000/= USD 15 |
TZS 1842: 2016 ISO 6059: 1984 | 2016 | Water quality — Determination of the sum of calcium and magnesium — EDTA titrimetric method Specifies a titrimetric method using ethylenediaminetetraacetic acid (EDTA) for the determination of the sum of the calcium and magnesium concentrations in ground waters, surface waters and ICS: 13.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 1841-1: 2016 ISO 6703: 1984 | 2016 | Water quality Determination of cyanide — Part 1: Determination of total cyanide Specifies three methods for the determination of total cyanide (see clause 2) in water. ICS: 13.060.01 |
11 | TSHS 20,000/= USD 20 |
TZS 1840: 2016 ISO 6332: 1988 | 2016 | Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline Specifies a 1,10-phenanthroline spectrometric method for the determination of iron in water and waste water. Procedures are describing are describing for the determination. ICS: 13.060.01 |
4 | TSHS 10,000/= USD 10 |
TZS 1839: 2016 ISO 6333: 1986 | 2016 | Water quality — Determination of manganese — formaldoxime spectrometric methods Specifies a formaldoxime spectrometric method for the determination of total manganese (including dissolved, suspended and organically bound manganese) in surface and drinking water ICS: 13.060.50 |
4 | TSHS 10,000/= USD 10 |
TZS 1838: 2016 ISO 6777: 1984 | 2016 | Water quality — Determination of nitrite — Molecular absorption spectrometric method Specifies a molecular absorption spectrometric method for the determination of nitrite in potable, raw and waste water. ICS: 13.060.01 |
5 | TSHS 10,000/= USD 10 |
TZS 1837: 2016 ISO 7027: 1999 | 2016 | Water quality — Determination of turbidity Specifies four methods for the determination of turbidity of water. ICS: 13.060.60 |
10 | TSHS 15,000/= USD 15 |
TZS 1836: 2016 ISO 5961: 1994 | 2016 | Water quality — Determination of cadmium by atomic absorption spectrometry Specifies two methods for the determination of cadmium: flame atomic absorption spectrometry (AAS) (section 2) and electrothermal atomization (AAS) (section 3). ICS: 13.060.40 |
10 | TSHS 15,000/= USD 15 |
TZS 1835: 2016 ISO 5664: 1984 | 2016 | Water quality — Determination of ammonium — Distillation and titration method Specifies a distillation and titration method for the determination of ammonium in raw, potable and waste water ICS: 13.060.01 |
3 | TSHS 10,000/= USD 10 |
TZS 1830: 2016 ISO 18416: 2007 | 2016 | Cosmetics — Microbiology — Detection of candida albicans General guidelines for the detection and identification of the specified microorganism Candida albicans in cosmetic products. Microorganisms considered as specified in this international sta ICS: 07.100.99 |
17 | TSHS 25,000/= USD 25 |
TZS 1829: 2016 ISO 16212: 2008 | 2016 | Cosmetics — Microbiology — Enumeration of yeast and mould General guidelines for enumeration of yeast and mould present in cosmetics by counting the colonies on selective agar medium after aerobic incubation. ICS: 07.100.99 |
19 | TSHS 25,000/= USD 25 |
TZS 1828: 2016 ISO 11930: 2012 | 2016 | Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product Comprises: a preservation efficacy test; and procedure for evaluating the overall antimicrobial protection of a cosmetic product which is not considered low risk, based on a risk assessment ICS: 07.100.99 |
22 | TSHS 30,000/= USD 30 |
TZS 1827: 2016 ISO 22718: 2006 | 2016 | Cosmetics — Microbiology — Detection of Staphylococcus aureus General guidelines for the detection and identification of the specified microorganism Staphylococcus aureus in cosmetic products. Microorganisms considered as specified in this internationa ICS: 07.100.99 |
15 | TSHS 20,000/= USD 20 |
TZS 1826: 2016 ISO 22717: 2006 | 2016 | Cosmetics — Microbiology — Detection of pseudomonas aeruginosa General guidelines for the detection and identification of the specified micro-organism Pseudomonas aeruginosa in cosmetic products. Micro-organisms considered as specified in this Internati ICS: 07.100.99 |
13 | TSHS 20,000/= USD 20 |
TZS 1825: 2016 ISO 21150:2006 | 2016 | Cosmetics — Microbiology — Detection of Escherichia coli General guidelines for the detection and identification of the specified microorganism Escherichia coli in cosmetic products. Microorganisms considered as specified in this international sta ICS: 71.100.70 |
14 | TSHS 20,000/= USD 20 |
TZS 1824: 2016 ISO 21149: 2006 | 2016 | Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria General guidelines for enumeration and detection of aerobic mesophilic bacteria present in cosmetics. ICS: 07.100.99 |
24 | TSHS 30,000/= USD 30 |
TZS 1822: 2016 | 2016 | Heavy-duty alkaline detergents for ‘cleaning-in-place’ in food and beverage industry — Specification Specifies requirements and test methods for heavy-duty alkaline detergents designed primarily for the removal of ‘difficult’/stubborn soils from stainless steel equipment in food and beverag ICS: 71.100.40 |
9 | TSHS 15,000/= USD 15 |
TZS 1818: 2016 | 2016 | Household fabric softeners — Specification Specifies requirements and methods of test for household fabric softeners/conditioner/enhancers. ICS: 71.100.40 |
11 | TSHS 20,000/= USD 20 |
TZS 1823: 2016 ISO 21148: 2005 | 2016 | Cosmetics — Microbiology — General instructions for microbiological examination General instructions for carrying out microbiological examinations of cosmetic products, in order to ensure their quality and safety, in accordance with an appropriate risk analysis (e.g low ICS: 07.100.99 |
21 | TSHS 30,000/= USD 30 |
TZS 1816: 2016 | 2016 | Determination of carbon dioxide in workplace atmospheres Describes the collection and analysis of carbon dioxide (CO2) in workplace atmospheres. Samples are collected in gas sampling bags and analyzed using a gas chromatograph (GC). The qualitativ ICS: 13.040.30 |
11 | TSHS 20,000/= USD 20 |
TZS 1815: 2016 | 2016 | Determination of ammonia in workplace atmospheres Describes the collection and analysis of airborne ammonia. The current permissible exposure limit (STEL) for ammonia is 35 ppm (27 mg/m3). The detection limit of ammonia is 2.0 µg NH3 in sol ICS: 13.040.30 |
7 | TSHS 15,000/= USD 15 |
TZS 1814: 2016 EAS 834: 2016 | 2016 | Processing and handling of salted fish and fish products — Code of practice Prescribes guidelines for processing and handling of salted fish and fish products intended for human consumption. ICS: 67.020 |
8 | TSHS 15,000/= USD 15 |
TZS 1813: 2016 EAS 833: 2016 | 2016 | Processing and handling of dried fish and fish products — Code of practice Prescribes guidelines for processing and handling of dried fish and fish products intended for human consumption. ICS: 67.020 |
5 | TSHS 10,000/= USD 10 |
TZS 1812: 2016 EAS 832: 2016 | 2016 | Fish industry — Operational cleanliness and hygiene — Guidelines Covers guidelines for operational cleanliness and hygiene in the fish industry. ICS: 67.020 |
8 | TSHS 15,000/= USD 15 |
TZS 1811: 2016 EAS 831: 2016 | 2016 | Frozen fish fillets — Specification Specifies requirements and methods of sampling and test for frozen fish fillets intended for human consumption. ICS: 67.120.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1810: 2016 EAS 830: 2016 | 2016 | Frozen fish sticks (fish fingers), fish portions and fish fillets — Breaded or in batter — Specification Specifies requirements and methods of sampling and test for frozen fish stick (fish fingers), fish portions and fish fillets-breaded or batter, intended for human consumption ICS: 67.120.30 |
5 | TSHS 10,000/= USD 10 |
TZS 1809: 2016 EAS 829: 2016 | 2016 | Transport of live fish seeds for acquaculture purposes — Code of practice Prescribes conditions for the handling and transportation of live fish seeds for aquaculture purposes. ICS: 03.220.99 |
6 | TSHS 15,000/= USD 15 |
TZS 1808: 2016 EAS 827: 2016 | 2016 | Fresh and frozen whole fin fish — Specification Specifies requirements, methods of sampling and test for fresh and frozen whole fin fish. ICS: 67.120.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1807: 2016 EAS 828: 2016 | 2016 | Dried and salted dried fish — Specification Specifies the requirements and the methods of sampling and test for dried and salted fish. This standard does not apply to Rastrineobola argentea and smoked fish. ICS: 67.120.30 |
6 | TSHS 15,000/= USD 15 |
TZS 1806: 2016 EAS 826: 2016 | 2016 | Dried fish — Silver cyprinid (Rastrineobola argentea) — Specification Specifies the requirements and methods of sampling and test for dried silver cyprinid (Rastrineobola argentea). NOTE This includes common names used in EAC such as Omena, Dagaa, Mukene, In ICS: 67.120.30 |
8 | TSHS 15,000/= USD 15 |
TZS 1805: 2016 | 2016 | Textiles — Warehousing practice for cotton lint Outlines the minimum requirements for commercial warehousing of cotton lint. It also specifies the details that a storage warehouse must meet in order to store and handle cotton lint. ICS: 59.060.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1804: 2016 | 2016 | Textiles — sampling practice of cotton fibres for testing Covers procedures for taking lot sample of cotton fibres, from a designated source (lot), and reducing it through a series of steps to produce test specimens that are representative of the so ICS: 59.060.10 |
4 | TSHS 10,000/= USD 10 |
TZS 1803: 2016 | 2016 | Textiles — Terminology for cotton fibres Compilation of the cotton terminology compiled by the Fibre (Cotton) Technical Committee (TC); TDC7 — Fibre — Cotton. ICS: 59.060.10 |
9 | TSHS 15,000/= USD 15 |
TZS 1801: 2016 EAS 352: 2014 | 2016 | Chewing gum and bubble gum — Specification Specifies the requirements and methods of sampling and testing for chewing gum and bubble gum. ICS: 67.180.10 |
9 | TSHS 15,000/= USD 15 |
TZS 1799:2016 EAS 349:2015 | 2016 | Liquid glucose (glucose syrup) –Specification Specifies the requirements and the methods of sampling and test for liquid glucose (glucose syrup) for human consumption. ICS: 67.180.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1798: 2016 EAS 819: 2015 | 2016 | Molasses for industrial use — Specification Specifies requirements and methods of sampling and test for molasses for industrial use. ICS: 67.180.10 |
9 | TSHS 15,000/= USD 15 |
TZS 1797: 2016 EAS 818: 2015 | 2016 | Sugar cane jiggery — Specification Specifies requirements and methods of sampling and test for sugar cane jiggery. ICS: 67.180.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1800: 2017 | 2017 | Cakes ― Specification Prescribes the requirements and sampling and test methods for cakes intended for direct human consumption. This standard applies to plain cakes, fruitcakes, sponge cakes and speciality cakes ICS: 67.060 |
7 | TSHS 15,000/= USD 15 |
TZS 1795:2016 | 2016 | Steel wire products for fencing. Specifies requirements for steel wires and wire products used for fencing purposes. ICS: 77.140.65 |
18 | TSHS 25,000/= USD 25 |
TZS 1893: 2016 ISO 1514: 2004 | 2016 | Paints and varnishes — Standard panels for testing Specifies several types of standard panel and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes ICS: 87.040 |
16 | TSHS 25,000/= USD 25 |
TZS 1899: 2016 EAS 852: 2015 | 2016 | Auto-dried roofing paint — Specification Specifies requirements, sampling and test methods for solvent-borne air-dried roofing paint for use on galvanized iron sheet, zinc and zinc alloy coated steel. ICS: 87.060.30 |
6 | TSHS 15,000/= USD 15 |
TZS 1898: 2016 EAS 848: 2015 | 2016 | Water-thinned priming paints for wood — Specification Specifies requirements, sampling and test methods for water-thinned priming paints intended for application by brush, roller spray or any other suitable method to the exterior and interior o ICS: 87.060.30 |
7 | TSHS 15,000/= USD 15 |
TZS 1896-3: 2016 ISO 9117-3: 2010 | 2016 | Paints and varnishes — Drying tests— Part 3: Surface-drying test using ballotini Specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components. The ICS: 87.040 |
4 | TSHS 10,000/= USD 10 |
TZS 1896-1: 2016 ISO 9117-1: 2009 | 2016 | Paints and varnishes — Drying tests— Part 1: Determination of through-dry state and through-dry time Specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint, varnish or related material has reached the through-dry state after a ICS: 87.040 |
7 | TSHS 15,000/= USD 15 |
TZS 1895-1: 2016 ISO 6504-1: 1983 | 2016 | Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints Specifies a method to be used for determining the hiding power (spreading rate necessary to give a contrast ratio of 98 %) of white or light-coloured paints. lt is restricted to paint films ICS: 87.040 |
31 | TSHS 40,000/= USD 40 |
TZS 1894: 2016 ISO 6503: 1984 | 2016 | Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method Describes a flame atomic absorption spectrometric method for the determination of total lead in paints and related products. The method is applicable to products having total lead contents i ICS: 87.040 |
6 | TSHS 15,000/= USD 15 |
TZS 1757-3: 2016 | 2016 | Quantities and units — Part 3: Space and time Gives names, symbols and definitions for quantities and units of space and time. Where appropriate, conversion factors are also given. ICS: 01.060 |
19 | TSHS 25,000/= USD 25 |
TZS 1757-2: 2016 | 2016 | Quantities and units — Part 2: Mathematical signs and symbols to be used in the natural sciences and technology Gives general information about mathematical signs and symbols, their meanings, verbal equivalents and applications. ICS: 01.060 |
40 | TSHS 45,000/= USD 45 |
TZS 1756: 2015 ISO 3400: 1997 | 2015 | Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method Specifies a method for the spectrometric determination of alkaloids in cigarette smoke condensates. ICS: 65.160 |
9 | TSHS 15,000/= USD 15 |
TZS 1755: 2015 ISO 10315: 2013 | 2015 | Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method Specifies a method for the gas-chromatographic determination of nicotine in cigarette smoke condensates ICS: 65.160 |
7 | TSHS 15,000/= USD 15 |
TZS 1754:2015 ISO 8243: 2003 | 2015 | Cigarettes — Sampling. Specifies two methods of providing representative samples of a population of cigarettes manufactured for sale ICS: 65.160 |
16 | TSHS 25,000/= USD 25 |
TZS 1753: 2015 ISO 8454: 1995 | 2015 | Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method Specifies a method for the determination of carbon monoxide (CO) in the vapour phase of cigarette smoke. ICS: 65.160 |
7 | TSHS 15,000/= USD 15 |
TZS 1752: 2015 ISO 15152: 2003 | 2015 | Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method Specifies a method for the determination of the content of total alkaloids as nicotine in tobacco by continuous-flow analysis. ICS: 65.160 |
11 | TSHS 20,000/= USD 20 |
TZS 1751: 2015 ISO 3402: 1999 | 2015 | Tobacco and tobacco products — Atmosphere for conditioning and testing. Specifies the atmosphere for the conditioning and testing of samples and test pieces of tobacco and tobacco products. It is applicable to tests on tobacco, tobacco products, and materials us ICS: 65.160 |
4 | TSHS 10,000/= USD 10 |
TZS 1750: 2015 ISO 2817: 1999 | 2015 | Tobacco and tobacco products — Determination of silicated residues insoluble in hydrochloric acid. Specifies a method for the determination of the percentage of hydrochloric-acidinsoluble extraneous silica particles, especially particles of sand, in tobacco (whole leaf, cut tobacco, tobac ICS: 65.160 |
6 | TSHS 15,000/= USD 15 |
TZS 1749: 2015 ISO 3550-1: 1997 | 2015 | Cigarettes — Determination of loss of tobacco from the ends — Part 1: Method using a rotating cylindrical cage. Specifies a method for the determination of loss of tobacco from cigarette ends using a rotating cylindrical cage. It applies mainly to cigarettes sampled on the manufacturing site, before o ICS: 65.160 |
10 | TSHS 15,000/= USD 15 |
TZS 1748: 2015 ISO 16632: 2003 | 2015 | Tobacco and tobacco products — Determination of water content — Gas-chromatographic method Specifies a gas-chromatographic (GC) method for the determination of water content. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable fo ICS: 65.160 |
9 | TSHS 15,000/= USD 15 |
TZS 1747: 2015 ISO 6488: 2004 | 2015 | Tobacco and tobacco products — Determination of water content — Karl Fischer method. Specifies a method for the determination of water content by the Karl Fischer method. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable ICS: 65.160 |
8 | TSHS 15,000/= USD 15 |
TZS 1746: 2015. ISO 4387: 2000 | 2015 | Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine. Specifies methods for the determination of total particulate matter and for the subsequent determination of nicotine-free dry particulate matter present in the smoke from cigarettes generate ICS: 65.160 |
17 | TSHS 25,000/= USD 25 |
TZS 1745:2016 | 2016 | Fresh Garlic – Specification Applies to garlic of varieties (cultivars) grown from Allium sativum (L.) to be supplied either fresh, semi-dry or dry to the consumer, garlic for processing being excluded. ICS: 67.220.20 |
7 | TSHS 15,000/= USD 15 |
TZS 1744: 2016 | 2016 | Dehydrated garlic — Specification Specifies requirements and methods of sampling and test for dehydrated garlic from Allium sativum (L.) intended for human consumption. ICS: 67.220.10 |
8 | TSHS 15,000/= USD 15 |
TZS 1743: 2016. | 2016 | Code of hygienic practice for fresh fruits and vegetables Covers general hygienic practices for the primary production and packing of fresh fruits and vegetables cultivated for human consumption in order to produce safe and wholesome products: part ICS: 67.020 |
21 | TSHS 30,000/= USD 30 |
TZS 1742: 2015. ISO 21067: 2007 | 2015 | Packaging — Vocabulary. Specifies preferred terms and definitions related to packaging and materials handling, for use in international commerce. ICS: 01.040.55 |
11 | TSHS 20,000/= USD 20 |
TZS 1741: 2015 ISO 28219: 2009 | 2015 | Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols Defines minimum requirements for identifying items; provides guidelines for item marking with machine-readable symbols; covers both labels and direct marking of items; includes testing proce ICS: 35.040 |
49 | TSHS 55,000/= USD 55 |
TZS 1740: 2015. ISO 3394: 2012 | 2015 | Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages Sets forth a series of dimensions for rigid rectangular transport packages, based on the standard plan dimension (module) of 600 mm × 400 mm, 600 mm × 500 mm and 550 mm × 366 mm, as outlined ICS: 55.020 |
11 | TSHS 20,000/= USD 20 |
TZS 1739:2015. ISO 3676:2012 | 2015 | Packaging – Complete filled transport packages and unit loads – Unit load dimension. Specifies the plan dimensions for unit loads suitable for the distribution of goods which comprises all activities for the movement of products from their origin to their destination. ICS: 55.020 |
5 | TSHS 10,000/= USD 10 |
TZS 1737-2: 2015. ISO 9884-2: 1999 | 2015 | Tea sacks — Specification — Part 2: Performance specification for sacks for palletized and containerized transport of tea Specifies requirements and tests to determine the suitability of sacks for the palletized and containerized transport of tea on standard pallets of standard unit load size in standard contai ICS: 55.080 |
12 | TSHS 20,000/= USD 20 |
TZS 1737-1: 2015. ISO 9884-1:1994 | 2015 | Tea sacks — Specification — Part 1: Reference sack for palletized and containerized transport of tea Specifies the materials, constructions of a reference sack (valve-pasted, flat, hexagonal-ended sack of stepped- end construction, formed from a stepped-end tube) suitable for the palletized ICS: 55.080 |
6 | TSHS 15,000/= USD 15 |
TZS 1736: 2016 | 2016 | Coriander — Specification Specifies the requirements and methods of sampling and test for coriander seed (Coriandrum sativum L.), in the whole and ground (powdered) forms intended for human consumpti ICS: 67.220.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1735: 2016 | 2015 | Vanilla ¬– Specification Specifies requirements and methods of sampling and test for vanilla belonging to the species Vanilla fragrans (Salisbury) Ames, syn. Vanilla planifolia Andrews. It is applicable to vanilla i ICS: 67.220.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1734: 2016 | 2016 | Cinnamon — Specification Specifies the requirements and the methods of sampling and test for whole or ground (powdered) cinnamon which is the bark of the tree or shrub Cinnamomum zeylanicum blume intended for hu ICS: 67.220.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1733: 2015 | 2015 | Retro reflective marking for commercial vehicles and their trailers — Specification Applies to the approval of retro reflective marking used to increase the visibility and recognition for commercial vehicles and their trailers. ICS: 43.040.20 |
22 | TSHS 30,000/= USD 30 |
TZS 1732: 2015 | 2015 | Protective leather gloves — Specification Covers general requirements for gloves design, construction, sizes and other information applicable to all protective Leather gloves. This Tanzania Standard can also be applied to arm guards ICS: 13.340.40 |
15 | TSHS 20,000/= USD 20 |
TZS 1731: 2015 | 2015 | Leather — Ladies Handbags-Specification Covers general requirements for materials, design, construction and other information applicable to all ladies’ fashion handbags made with leather or coated fabrics outer. ICS: 59.140.35 |
11 | TSHS 20,000/= USD 20 |
TZS 1730: 2015 | 2015 | Textiles — B-Twill Jute cloth — Specification Specifies the constructional details and other particulars of a B-twill jute cloth used for stitching jute bags for packing agricultural food grains. ICS: 59.080.20 |
3 | TSHS 10,000/= USD 10 |
TZS 1729: 2015 | 2015 | Textiles — Hessian bags — Specification Specifies requirements for two types of hessian bags fabricated from type 1and type 2 of hessian cloth. This specification may be used by mutual agreement between the purchaser and the suppl ICS: 59.080.30 |
3 | TSHS 10,000/= USD 10 |
TZS 1728: 2015 | 2015 | Textile — Specification for school bags Specifies the requirements, method of test and sampling for school bags for carrying books and other learning materials. It does not specify the general appearance, feel, luster or degree of ICS: 55.080 |
8 | TSHS 15,000/= USD 15 |
TZS 1727: 2015 | 2015 | Textile — Floor covering — Tufted carpets — Specification. Prescribes the constructional particulars and requirements for tufted carpets made from wool or man-made fibres or their blend. It does not cover specific characteristics, such as suitabilit ICS: 97.150 |
11 | TSHS 20,000/= USD 20 |
TZS 1726: 2015 | 2015 | Textiles – Woven and warp knitted quilt fabrics — Specification Specification covers woven and warp knitted quilt fabrics, composed of any textile fibre, or fibre blends. The requirements apply to the length and width directions for those properties wher ICS: 59.080.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1725:2014 | 2014 | Footballs — Specification Covers the requirements, methods of sampling and test for footballs made from leather or synthetic material. ICS 97.220.40 |
5 | TSHS 10,000/= USD 10 |
TZS 1707: 2015 | 2015 | Textiles — Woven and knitted sheeting products — Specification This specification covers the evaluation of specific performance characteristics of importance in woven and knitted flat, fitted, and waterbed sheet products for use in institutional and hou ICS: 97.160 |
6 | TSHS 15,000/= USD 15 |
TZS 1190: 2010 (1st Ed) | 2010 | Dried Roselle- Specification Prescribes requirements and methods of Sampling and tests for dried roselle calyces, Hibiscus subdariffa, of Malvaceae family ICS 67.080 |
5 | TZS 10,000/-USD 10 |
TZS 1189: 2010 (1st Ed) | 2010 | Dried Banana - Specification Prescribes requirements and methods of sampling and tests for dried banana from Musa spp of the family Musaceae; intended for direct human consumption or for other use in the food industry ICS 67.080 |
6 | Tshs. 15,000/= USD 15 |
TZS 1188:2016 (2nd Ed) | 2016 | Dried Mango – Specification Specifies requirements and methods of sampling and tests for dried mangoes from Mangifera indica intended for direct human consumption or for other use in the food industry ICS 67.080 |
9 | Tshs. 15,000/= USD 15 |
TZS 1187 (Part 17): 2010(1st Ed)- ISO 15500-17: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 17: Flexible fuel line Specifies test and requirements for the flexible line, a compressed natural gas fuel system component in accordance with SAE J 517 (100R-8 hose) or JIS B 8362 intended for use on the types o ICS 43.060.40 |
6 | Tshs. 15,000/= USD 15 |
TZS 1187 (Part 16): 2010 (1st Ed) -ISO 15500-16: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 16: Rigid fuel line Specifies test and requirements for the rigid fuel line, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 15): 2010- ISO 15500-15: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 15: Gas- tight housing and ventilation hose Specifies test and requirements for the gas- tight housing and ventilation hose, a compressed natural gas fuel system component intended for use on all types of motor vehicles ICS 43.060.40 |
3 | TZS 10,000/-USD 10 |
TZS 1706: 2015 | 2015 | Textiles — Woven, knitted or flocked bedspread fabrics — Specification Specifies performance requirements for woven, knitted, or flocked fabrics to be used in the manufacturing of bedspreads. ICS: 59.080.30 |
2 | TSHS 10,000/= USD 10 |
TZS 1705: 2015. EAS 47: 2000 | 2015 | Fresh papaya — Specification Prescribes requirements for fish (carica papayas) to be supplied in export and local specified markets. It also stipulates requirements for handling, grading and packaging of the produce. ICS: 67.080.10 |
2 | TSHS 10,000/= USD 10 |
TZS 1704: 2017 EAS 19: 2017 | 2017 | Fresh avocados — Specifications Specifies requirements, sampling and test methods for avocados (Persea americana Gartner or P. Grattisima mill) fruits of the family Lauraceae to be supplied fresh to the consumer. This stan ICS: 67.080.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1697: 2014 EAS 166: 2000 | 2014 | Wood poles for power and telecommunication lines — Specification — Part 1: Eucalyptus Specifies requirements for wood poles for power transmission and telecommunication overhead lines. ICS: 79.080 |
11 | TSHS 20,000/= USD 20 |
TZS 1696:2014(1st Ed) EAS 290 part 3:2002 | 2014 | Polishes — Specification ⎯ Part 3: Floor polish water emulsion buffable type Prescribes requirements and methods of test for water emulsion floor polish buffable type. ICS: 87.060.30 |
5 | TSHS 10,000/= USD 10 |
TZS 1695:2014(1st Ed) EAS 290-2: 2002 | 2014 | Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste) Prescribes the requirements and the methods of test for solvent- based floor polishes (liquid and paste). ICS: 87.060.30 |
5 | TSHS 10,000/= USD 10 |
TZS 1694:2014(1st Ed) EAS 293 Part 2:2007 | 2014 | Road marking materials — Part 2: Road marking performance for road users Specifies the performance for road users of white and yellow road markings, as expressed by their reflection in daylight and under road lighting, retroreflection in vehicle headlamp illumina ICS: 97.080.20 |
18 | TSHS 25,000/= USD 25 |
TZS 1693: 2014 EAS 293-1:2007 | 2014 | Road marking materials — Physical Properties Specifies the laboratory requirements and test methods for retro reflective and other road marking materials, both permanent and temporary. ICS: 97.080.20 |
35 | TSHS 40,000/= USD 40 |
TZS 1691:2018(2nd Ed) | 2014 | Automatic Transmission Fluids (ATF) based on road vehicles —Specification Specifies requirements, sampling and test method for Automatic Transmission Fluids (ATF) based on road vehicles. It also specifies the classification as recommended by manufacturers and meet ICS: 75.120 |
6 | TSHS 15,000/= USD 15 |
TZS 1690:2014(1st Ed) | 2014 | Holomo cheese — Specification Specifies requirements, methods of test and sampling for holomo cheese intended for direct consumption or for further processing. ICS: 67.100.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1689:2014(1st Ed) EAS 461:2013 | 2014 | Hair dyes – Part 1: Aryl diamine based formulated powders — Specification Specifies the requirements and methods of sampling and test for aryl diamine based formulated powder hair dyes. It covers permanent powder hair dyes based on aryl di-amines which act as prim ICS: 71.100.70 |
15 | TSHS 20,000/= USD 20 |
TZS 1688:2014(1st Ed) EAS 341:2013 | 2014 | Nail polish removers— Specification Specifies the requirements and methods of sampling and test for nail polishes used for cosmetics purposes. ICS: 71.100.70 |
5 | TSHS 10,000/= USD 10 |
TZS 1687:2014(1st Ed) EAS 340:2013 | 2014 | Nail polish- specification Specifies the requirements and methods of test for nail polish used for cosmetics ICS: 71.100.70 |
15 | TSHS 20,000/= USD 20 |
TZS 1686: 2014(1st Ed) EAS 334: 2013 | 2014 | List by category of cosmetic products Lays down the list of products that are classified as cosmetics. ICS: 71.100.70 |
3 | TSHS 10,000/= USD 10 |
TZS 1685:2014(1st Ed) EAS 134:2013 | 2014 | Cold rolled steel section-Specification Specifies the dimensions and sectional properties of cold rolled steel sections of thickness up to 8 mm for use in structural applications. The section are listed in Tables 4 to 12 ICS: 77.140.01 |
22 | TSHS 30,000/= USD 30 |
TZS 1684: 2014 EAS 494: 2008 | 2014 | Incineration plant for the destruction of hospital waste — Code of practice for the design, specification, installation and commissioning Give guidance on the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste. It also gives information on training of staff and mai ICS: 13.030.40 |
19 | TSHS 25,000/= USD 25 |
TZS 1683: 2014 EAS 493: 2008 | 2014 | Incineration plant for destruction of hospital waste — Method for specifying purchasers’ requirements Specifying requirements for incinerators for the destruction of hospital waste manufactured to specifiers’ requirements. It does not cover other items of plant such as charging machine, ch ICS: 13.030.40 |
6 | TSHS 15,000/= USD 15 |
TZS 1682:2014(1st Ed) EAS 492:2008 | 2014 | Incineration plant for the destruction of hospital waste — Method of test and calculation for the performance Describes methods of test for the performance of the incineration plant. ICS: 13.030.40 |
16 | TSHS 25,000/= USD 25 |
TZS 1681:2014(1st Ed) EAS 491:2008 | 2014 | Incineration plant for the destruction of hospital waste — Specification Specifies the performance requirements for incineration plant, assisted by auxiliary fuel if required, suitable for the destruction of hospital waste. ICS: 13.030.40 |
3 | TSHS 10,000/= USD 10 |
TZS 1680:2014(1st Ed) EAS 770:2013 | 2014 | Fortified sugar — Specification Specifies the requirements and methods of sampling and test for fortified brown sugars and fortified plantation (mill) white sugar intended for direct human consumption ICS: 67.180.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1679: 2014 EAS 108: 2013 | 2014 | Hot-rolled, heavy-thickness carbon steel sheets, coils and strips — Specification Specifies requirements for hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality. ICS: 77.140.20 |
14 | TSHS 20,000/= USD 20 |
TZS 1678:2014(1st Ed) EAS 802:2013 | 2014 | Textured soya protein products — Specification Specifies requirements and methods of sampling and test for textured soya protein products intended for human consumption. ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1677:2014(1st Ed) EAS 801:2013 | 2014 | Soya protein products- specification Specifies requirements and methods of sampling and test for soya protein products intended for human consumption ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1676:2014 EAS 765:2013 | 2014 | Brown Rice- specification Specifies the requirements and methods of sampling and test for brown rice of the varieties grown from Oryza spp., intended for human consumption or for processing to milled rice. ICS: 67.060 |
7 | TSHS 15,000/= USD 15 |
TZS 1675:2014(1st Ed) EAS 764:2013 | 2014 | Rough (paddy) Rice- Specification Specifies the requirements and methods of sampling and test for rough rice of the varieties grown from Oryza spp. used for further processing. ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1674:2014(1st Ed) EAS 763:2013 | 2014 | Faba beans — Specification Specifies the requirements and methods of sampling and test for faba beans of cultivated varieties (cultivars) grown from Vicia faba L. intended for human consumption ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1673:2014(1st Ed) EAS 761:2013 | 2014 | Dry split peas — Specification Specifies the requirements and methods of sampling and test for dry split peas of varieties (cultivars) grown from Pisum sativum L. and Pisum sativum var. arvense (L.) Poir. intended for hum ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
1504. TZS 1672:2014(1st Ed) EAS 760:2013 | 2014 | Lentils — Specification Specifies the requirements and methods of sampling and test for shelled whole lentils of varieties (cultivars) grown from Lens culinaris Medic. Syn. Lens esculenta Moench. intended for human ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1671:2014(1st Ed) EAS 759:2013 | 2014 | Dry whole peas — Specification Specifies the requirements and methods of sampling and test for dry whole peas of varieties (cultivars) grown from Pisum sativum L. and Pisum sativum var. arvense (L.) Poir. intended for hum ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1670:2014(1st Ed) EAS 758:2013 | 2014 | Finger millet grains — Specification Specifies the requirements and methods of sampling and test for finger millet grains of varieties (cultivars) grown from Eleusine coracana (L.) Gaertner intended for human consumption. ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1669:2014(1st Ed) EAS 757:2013 | 2014 | Sorghum grains — Specification Specifies the requirements and methods of sampling and test for sorghum grains of varieties (cultivars) grown from Sorghum bicolor (L.) Moench intended for human consumption ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1668:2014(1st Ed) EAS 755:2013 | 2014 | Cowpeas — Specification Specifies the requirements and methods of sampling and test for dry cowpeas of the varieties (cultivars) grown from Vigna unguiculata Linn.Sync. Vigna sinensis (L.) Hassk. intended for human ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1667:2014(1st Ed) EAS 754:2013 | 2014 | Chickpeas — Specification Specifies requirements and methods of sampling and test for dry chickpeas of the varieties (cultivars) grown from Cicer arietinum Linn. intended for human consumption. ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1666:2014 EAS 331:2013 | 2014 | Green grams — Specification Specifies requirements and methods of sampling and test for the dry whole grainsof the green gram of the cultivar Vigna radiata intended for direct human consumption ICS: 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1665:2014 EAS 284:2013 | 2014 | Pearl millet grains — Specification Specifies the requirements and methods of sampling and test for whole and decorticated pearl millet of the Senegalese varieties (cultivars) “souna” and “sanio” grown from Pennisetum glaucum ICS: 67.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1662:2014(1st Ed) | 2014 | Footwear — Leather men’s closed shoes — Specification Specifies the requirements for the men’s closed shoes which are made either by machine or by hand stitched or stuck on outer soles. ICS: 61.060 |
10 | TSHS 15,000/= USD 15 |
TZS 1661:2014(1st Ed) | 2014 | Code of practice for inspection and acceptance criteria for used footwear (mitumba) Prescribes code of practice for the inspection and acceptance criteria for used footwear in the country. ICS: 61.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1660:2014(1st Ed) | 2014 | Polyurethane (PU) coated leather — Specification Prescribes requirements, methods of sampling and test for polyurethane (PU) coated leather. ICS: 59.080.40 |
8 | TSHS 15,000/= USD 15 |
TZS 1659:2014(1st Ed) | 2014 | Textiles — Reusable sanitary towels — Specification Prescribes the requirements for reusable sanitary towels for external use ICS: 59.080.30 |
11 | TSHS 20,000/= USD 20 |
TZS 1657:2014(1st Ed) EAS 797:2013 | 2014 | Vitamin and mineral food supplements ― Requirements Specifies the requirements for vitamin and mineral food supplements intended for use in supplementing the daily diet with vitamins and/or minerals. It covers vitamin and mineral food supplem ICS: 67.230 |
11 | TSHS 20,000/= USD 20 |
TZS 1656:2014(1st Ed) EAS 798:2013 | 2014 | Lipid food supplements ― Requirements Specifies the requirements for lipid food supplements used for complementing the normal diet with essential fatty acids. It covers lipid food supplements primarily providing essential fatty ICS: 67.230 |
5 | TSHS 10,000/= USD 10 |
TZS 1655: 2014 | 2014 | Edible Casein — Specification Applies to edible acid casein, edible rennet casein and edible caseinate, intended for direct consumption or further processing. ICS: 67.100 |
6 | TSHS 15,000/= USD 15 |
TZS 1187 (Part 14): 2010 (1st Ed)- ISO 15500-14: 2002 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 14: Excess flow valve Specifies test and requirements for the excess flow valve, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 13): 2010 (1st Ed)- ISO 15500-13 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 13: Pressure relief device (PRD) Specifies test and requirements for the pressure relief device (PRD), a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS 43.060.40 |
11 | Tshs. 20,000/= USD 20 |
TZS 1187 (Part 12): 2010 (1st Ed) -ISO 15500-12: 2000 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 12: Pressure relief valve (PRV) Specifies test and requirement for the pressure relieve valve (PRV), a compressed natural gas fuel system component intended for use on all types of motor vehicles. ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 11): 2010 -ISO 15500-11: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 11: Gas/ air mixer Specifies test and requirements for the gas/ air mixer, a compressed natural gas fuel system component intended for use on all types of motor vehicles ICS 43.060.40 |
3 | TZS 10,000/-USD 10 |
TZS 1187 (Part 10): 2010 (1st Ed)- ISO 15500-10: 2000 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 10: Gas- flow adjuster Specifies test and requirements for the gas flow adjuster, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS: 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 9): 2010 (1st Ed)- ISO 15500-9: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 9: Pressure regulator Specifies test and requirements for the pressure regulator, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS 43.060.40 |
5 | TZS 10,000/-USD 10 |
TZS 1187 (Part 8): 2010- ISO 15500-8: 2001 | 2010 | Road vehicles - Compressed Natural Gas (CNG) fuel system components part 8: Pressure indicator Specifies test and requirements for the pressure indicator, a compressed natural gas fuel system component intended for use on all types of motor vehicles ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 7): 2010-ISO 15500-7: 2002 | 2010 | Road vehicles - Compressed Natural Gas (CNG) fuel system components Part 7: Gas injector Specifies test and requirements for the gas injector, a compressed natural gas fuel system component intended for use on all types of motor vehicles ICS: 43.060.40 |
5 | TZS 10,000/-USD 10 |
TZS 1187 (Part 6): 2010 (1st Ed) -ISO 15500-6: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 3: Check valve Specifies test and requirements for the automatic valve, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 5): 2010(1st Ed)- ISO 15500-5: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 5: Manual cylinder valve Specifies test and requirements for the manual cylinder valve, a compressed natural gas fuel system component intended for use on all types of motor vehicles ICS 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 3): 2010 (1st Ed) -ISO 15500-3: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 3: Check valve Specifies test and requirements for check valve, a compressed natural gas fuel system component intended for use on the types of motor vehicles ICS: 43.060.40 |
4 | TZS 10,000/-USD 10 |
TZS 1187 (Part 2): 2010 (1st Ed)- ISO 15500-2: 2001 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 2: Performance and general test method Specifies performance and general test methods for compressed natural gas fuel system components ICS: 43.060.40 |
8 | Tshs. 15,000/= USD 15 |
TZS 1187 (Part 1): 2010 (1st Ed)- ISO 15500-1: 2000 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 1: General requirements and definitions Specifies general requirement and definitions of compressed natural gas fuel system components. It also provides general design principles and specification requirements for instruction and ICS 43.060.40 |
5 | TZS 10,000/-USD 10 |
TZS 1184: 2010(1st Ed) | 2010 | Vehicle stability performance in the event of tyre failure Specifies the directional stability performance requirements for rigid passenger vehicles in the event of a tyre failure. It does not apply to articulated units or combination of vehicle or ICS: 43.060.40 |
6 | Tshs. 15,000/= USD 15 |
TZS 1183 (Part4): 2011 (1st Ed)- ISO 6887-4: 3003 | 2011 | Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination – Part 4: Specific rules for the prepar Specifies rules for the preparation of samples and decimal dilutions for the microbiological examination of food products ICS: 07.100. 30 |
13 | Tshs. 20,000/= USD 20 |
TZS 1654: 2019 | 2019 | Liqueurs — Specification Specifies requirements, methods of sampling and tests for liqueurs. ICS: 67.160.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1652:2014(1st Ed) EAS 792:2013 | 2014 | Carpet and upholstery shampoo — Specification Specifies the requirements and methods of sampling and test for a liquid foaming shampoo used for both general cleaning and spot cleaning of colourfast carpets and upholstery that are not da ICS: 77.100.40 |
4 | TSHS 10,000/= USD 10 |
TZS 1651:2014(1st Ed) EAS 791:2013 | 2014 | Oven cleaner and grease remover — Specification Specifies the requirements and methods of sampling and test for oven cleaner and grease remover. The standard covers three types of oven cleaners and grease removers that are suitable for th ICS: 77.100.40 |
7 | TSHS 15,000/= USD 15 |
TZS 1650:2014(1st Ed) EAS 789:2013 | 2014 | Instant hand sanitizers — Specification Specifies the requirements and methods of test for alcohol based instant hand sanitizers. The standard does not cover non-alcohol-based hand sanitizers. ICS: 77.100.40 |
7 | TSHS 15,000/= USD 15 |
TZS 1649:2014(1st Ed) EAS 788:2013 | 2014 | Synthetic detergent paste — Specification Specifies the requirements and methods of sampling and test for synthetic detergent pastes based predominantly on alkyl aryl sulphonates for hand and machine wash. ICS: 77.100.40 |
12 | TSHS 20,000/= USD 20 |
TZS 1647-2:2014(1st Ed) EAS 766-2:2013 | 2014 | Antibacterial toilet soap — Specification ― Part 2: Liquid Specifies the requirements, and methods of sampling and test for liquid antibacterial toilet soap. It includes antibacterial (bacteriostatic) and antifungal (fungal static). It does not cove ICS: 77.100.40 |
13 | TSHS 20,000/= USD 20 |
TZS 1647-1:2014(1st Ed) EAS 766-1:2013 | 2014 | Antibacterial toilet soap — Specification — Part 1: Solid Specifies the requirements and methods of sampling and test for solid antibacterial toilet soap. ICS: 77.100.40 |
12 | TSHS 20,000/= USD 20 |
TZS 1646:2013 EAS 456:2007 | 2013 | East Africa organic products standard Provides requirements for organic production. It covers plant production, animal husbandry, bee-keeping, the collection of wild products and the processing and labelling of the products ther ICS:67.020 |
23 | TSHS 30,000/= USD 30 |
TZS 1645: 2014 | 2014 | Point of use drinking water treatment units — Specification Covers performance and constructional requirements for point-of-use drinking water treatment units intended to be used for lowering the concentration in drinking water of substances that are ICS:71.080.60 |
12 | TSHS 20,000/= USD 20 |
TZS 1182: 2010 (1st Ed)- ISO 6887-3: 2003 | 2010 | Microbiology of food and animal feeding stuffs- preparation of test samples, initial suspension and decimal dilutions for microbiological examinations – Part 3: Specific rules for preparatio Specifies rules for the preparations of fish and fishery product samples and their suspensions for microbiological examination ICS: 07.100. 30 |
11 | Tshs. 20,000/= USD 20 |
TZS 1181:2018 (2nd Ed)- ISO 6887- 2:2003 | 2018 | Microbiology of food and animal feeding stuffs- preparation of test samples, initial suspension and decimal dilutions for microbiological examinations- Part 2: Specific rules for preparation Specifies rules for the preparation of meat and meat product samples and their suspension for microbiological examination ICS 07.100.30 |
15 | Tshs. 20,000/= USD 20 |
TZS 1180: 2017 (2nd Ed)- ISO 6887-1: 1999 | 2017 | Microbiology of food and animal feeding stuffs: Preparation of test samples, initial suspension and decimal dilutions for microbiological examinations – part 1: General rules for the preparat Defines general rules for aerobic preparation of the initial suspension and decimal dilutions for microbiological examination of products intended for human or animal consumption ICS: 07.100.20 |
5 | TZS 10,000/-USD 10 |
TZS 1179: 2010- ISO 6340: 1995 | 2010 | Water quality – Detection of Salmonella Species Specifies a method for the detection of Salmonella species in water samples for monitoring purposes ICS 07.100.20 |
11 | Tshs. 20,000/= USD 20 |
TZS 1178: 2010 (1st Ed) ISO 6222: 1999 | 2010 | Water quality - Enumeration of culturable micro-organisms- Colony count by inoculation in a nutrient agar culture medium Specifies a method for the enumeration of culturable micro-organisms in water by counting the colonies formed in nutrient agar culture medium after aerobic incubation at 36oC and 22oC ICS 07.100.20 |
4 | TZS 10,000/-USD 10 |
TZS 1177: 2011 (1st Ed)- ISO 11138-3: 2006 | 2011 | Sterilization of health care products – Biological indicators part 3: Biological indicators for moist heat sterilization process Specific requirements for test organisms, suspensions inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilization processes emp ICS 11.080.01 |
8 | Tshs. 15,000/= USD 15 |
TZS 1176: 2010 (1st Ed) ISO 7899-2: 2000 | 2010 | Water Quality - Detection and enumeration of intestinal Enterococci bacteria – Part 2: Membrane filtration method Specifies a method for detection and enumeration of intestinal enterococci in water by membrane filtration. It is intended for examination of drinking water, water from swimming pools and ot ICS 07.100.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1175: 2010 (1st Ed) ISO 7218: 2007 | 2010 | Microbiology of food and animal feeding stuffs- General requirement and guidance for microbiological examination Gives general requirement and guidance/options intended for tree main use: implementation of ISO/TC 34/SC 9 or ISO/TC 43/SC 5 standards for detection or enumeration of microorganisms, named ICS 07.100.20 |
66 | Tshs 75,000/= USD 75 |
TZS 1174: 2010 (1st Ed)- ISO 9308: 2000 | 2010 | Water quality- Detection and enumeration of Escherichia coli and coliforms bacteria Part 1: Membrane filtration method Describes a reference method (standard test) for the detection and enumeration of Escherichia Coli and coliforms bacteria in water for human consumption. The standard test is based on membra ICS: 07.100.20 |
10 | Tshs. 15,000/= USD 15 |
TZS 1173:2017(1st Ed) ISO 8633:1992 | 2017 | Solid fertilizers – Simple sampling method for small lots Defines a sampling for the control of quantities of solid fertilizers not more than 250t and outlines the method to be used ICS: 65.080 |
4 | TZS 10,000/-USD 10 |
TZS 1171:2017(1st Ed)- ISO 3963:1977 | 2017 | Fertilizers – Sampling from a conveyor by stopping the belt Specifies reference method for sampling all solid fertilizers transported on a conveyor belt from the place of manufacture or storage to some other location ICS: 65.080 |
2 | TZS 10,000/-USD 10 |
TZS 1170:2017(1st Ed)- ISO 10249:1996 | 2017 | Fluid fertilizers – Preliminary visual examination and preparation of samples for physical testing Specifies both a procedure for preliminary examination of a single sample as received for testing, and a procedure for preparing a test sample by blending and reduction of a series of sample ICS: 65.080 |
5 | TZS 10,000/-USD 10 |
TZS 1169:2017(1st Ed) -ISO 10248:1996 | 2017 | Fluid fertilizers – De- aeration of suspension samples by film disentrainment Specifies a procedure for the de-aeration of suspension samples for physical testing ICS: 65.080 |
1 | TZS 10,000/-USD 10 |
TZS 1168:2017 | 2017 | Fertilizer — Single super phosphate — Specification Prescribes the requirements, methods of sampling and test of Single Super Phosphate fertilizer in powder and granular forms ICS: 65.080 |
4 | TZS 10,000/-USD 10 |
TZS 1167: 2015- ISO 1573: 1980 | 2015 | Tea — Determination of loss in mass at 103°C. Specifies a method for the determination of the loss in mass when tea is heated in air at 103°C. ICS 67.140.10 |
2 | TZS 10,000/-USD 10 |
TZS 1166: 2015 ISO 15598: 1999 | 2015 | Tea — Determination of crude fibre content Specifies a method for the determination of crude fibre in tea ICS 67.140.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1165: 2015 (1st Ed) -ISO 1578: 1975 | 2015 | Tea — Determination of alkalinity of water-soluble ash Specifies a method for the determination of the alkalinity of water-soluble ash of tea. ICS 67.140.10 |
2 | TZS 10,000/-USD 10 |
TZS 1164: 2015 (1st ed) ISO 1577: 1987 | 2015 | Tea — Determination of acid-insoluble ash. Specifies a method for the determination of the acid-insoluble ash from tea ICS 67.140.10 |
2 | TZS 10,000/-USD 10 |
TZS 1163: 2015 (1st Ed) ISO 1576: 1988 | 2015 | Tea — Determination of water-soluble ash and water-insoluble ash Specifies a method for the determination of the water-soluble ash and the water-insoluble ash of tea ICS 67.140.10 |
2 | TZS 10,000/-USD 10 |
TZS 1162: 2015 (1st Ed) ISO 1575: 1987 | 2015 | Tea — Determination of total ash. Specifies a method for the determination of the total ash from tea ICS 67.140.10 |
2 | TZS 10,000/-USD 10 |
TZS 1161: 2015 (1st Ed) ISO 9768: 1994 | 2015 | Tea — Determination of water extracts Specifies a method for the determination of the water extract from tea ICS 67.140.10 |
3 | TZS 10,000/-USD 10 |
TZS 1160: 2015 (1st Ed)- ISO 7516: 1984 | 2015 | Instant tea in solid form — Sampling Specifies methods of sampling instant tea in solid form (hereinafter referred to as “instant tea”). It applies to sampling from Containers of all sizes ICS 67.140.10 |
4 | TZS 10,000/-USD 10 |
TZS 1159: 2017- ISO 4149:2005 | 2017 | Green Coffee – Olfactory and visual examination and determination of foreign matter and defects Specifies methods for the olfactory and visual examination and for the determination of foreign matter and defects in green coffee, in order to assess conformity with a specification or a co ICS 67.140.20 |
5 | TZS 10,000/-USD 10 |
TZS 1158: 2010 - ISO 10470:2004 | 2010 | Green Coffee – Defect reference chart Provides a chart which lists the main five different categories of defects which are considered to be potentially present in green coffee as marketed throughout the world, whatever its speci ICS 67.140.20 |
15 | Tshs. 20,000/= USD 20 |
TZS 1157:2017- ISO 9116:2004 | 2017 | Green Coffee - Guidelines on methods of specification Gives guidance on methods to be used to describe green coffee for sale and purchase and is based on the terms of contract used in the international coffee trade. It also recommends procedure ICS 67.140.20 |
4 | TZS 10,000/-USD 10 |
TZS 1156: 2017 -ISO 6673:2003 | 2017 | Green Coffee - determination of loss in mass at 105 oC. Specifies a method for the determination of the loss in mass at 105oC of green coffee. It is applicable to decaffeinated and non- decaffeinated green coffee ICS 67.140.20 |
4 | TZS 10,000/-USD 10 |
TZS 1155: 2010- ISO 1446:2001 | 2010 | Green Coffee - determination of water content- basic reference method Specifies the basic reference method for the determination of the water content of green coffee. This method is designed to serve as a standard for the checking and perfecting of method suit ICS 67.140.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1154: 2010- ISO 8455:1986 | 2010 | Green Coffee in bags - guide on storage and transport Gives general guidance on the conditions for minimizing the risks of infestation, contamination and quality deterioration of green coffee packed in bags and which is the subject of internati ICS 67.140.20 |
3 | TZS 10,000/-USD 10 |
TZS 1153: 2010 (1st Ed) ISO 6667: 1985 | 2010 | Green Coffee – Determination of proportion of insect- damaged beans Describes the types of damage caused by insects to green coffee beans and specifies a method for the determination of the proportion of insect- damaged beans in a lot of green coffee togethe ICS: 67.140.20 |
12 | Tshs. 20,000/= USD 20 |
TZS 1152: 2010 -ISO 4150:1991 | 2010 | Green coffee – Size analysis – Manual sieving Specifies a routine method for carrying out size analysis of green coffee by manual sieving using laboratory test sieves. The procedure includes the determination of moisture content or loss ICS 67.140.20 |
6 | Tshs. 15,000/= USD 15 |
TZS 1151:2010 (1st Ed)- ISO 6668: 1991 | 2010 | Green Coffee – Preparation of samples for use in sensory analysis Specifies a method for the roasting of green coffee, grinding the roasted coffee and the preparation from the ground coffee of a beverage to be used in sensory analysis ICS 67.140.20 |
5 | TZS 10,000/-USD 10 |
TZS 1150:2010 -ISO 4072:1982 | 2010 | Green Coffee in bags - Sampling Specifies a method of sampling a consignment of green coffee, shipped in the bags or more, for the purpose of examination to determine whether the consignment complies with a contract specif ICS 67.140.20 |
3 | TZS 10,000/-USD 10 |
TZS 1149: 2010 -ISO 6669:1995 | 2010 | Green and roasted coffee- Determination of free-flow bulk density of whole beans (Routine method) Specifies a method for the determination of the bulk density of whole green or roasted coffee beans under free-flow conditions from one container to another ICS 67.140.20 |
3 | TZS 10,000/-USD 10 |
TZS 1148: 2017- ISO 8460: 1987 | 2017 | Instant coffee- determination of free-flow and compacted bulk densities Specifies two methods for the determination of the bulk density of instant coffee a) free-flow bulk density (section one) b) compacted bulk density (section two). ICS 67.140.20 |
6 | Tshs. 15,000/= USD 15 |
TZS 1137: 2009 (1st Ed) | 2009 | Textiles- Tie and Dye - Specification Prescribes the requirements and methods of sampling and tests for tie and dye fibric ICS 61.020 |
11 | Tshs. 20,000/= USD 20 |
TZS 1136: 2009 | 2009 | Textile – Zippers – Specification Specifies performance levels required for zippers made from interlocking components mounted on textile tapes ICS 59.080.01 |
12 | Tshs. 20,000/= USD 20 |
TZS 1134: 2018 (2nd Ed) EAS 841: 2017 | 2018 | Hair oil- specification methods for hair oils. The standard covers three types of hair oils as follows: • Type 1; • Type 2; and • Type 3. Hair oils for which therapeutic claims are made are not covered by th ICS: 71.100.70 |
4 | TZS 10,000/-USD 10 |
TZS 1133:2017 | 2017 | Skin care oils – Specification Prescribes the requirements and method of sampling and test for skin care oils based on refined vegetable oils blends, vegetable oils, mineral oils or mixture of the vegetable oils and miner ICS:67.200.10 |
13 | Tshs. 20,000/= USD 20 |
TZS 1132:2009 (1st Ed) ISO 10530: 19992 | 2009 | Water Quality- Determination of dissolved sulfide- Photometric method using ethylene blue Specifies a photometric method for the determination of dissolved sulfide in water. The method is applicable to the determination of dissolved sulfide in a mass concentration range from 0. ICS 13.060.50 |
9 | Tshs. 15,000/= USD 15 |
TZS 1131(Part 1): 2009 (1st Ed) -ISO 11905-1: 1997 | 2009 | Water Quality – Determination of nitrogen – Part 1: Methods using oxidative digestion with peroxodisulfate Specifies a method for the determination of nitrogen present in water, in the form of free ammonia, ammonium, nitrite, nitrate and organic nitrogen compounds capable of conversion to nitrate ICS 13.060.01 |
13 | Tshs. 20,000/= USD 20 |
TZS 1130(Part 1): 2009 (1st Ed)- ISO 10304-1 2007 | 2009 | Water Quality - Determination of dissolved anions by liquid chromatography of ions- Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite phosphate and sulfate Specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, eg drinking water, ground water, surface water, wast ICS 13.060.50 |
15 | Tshs 20,000/= USD 20 |
TZS 1120:2009- ISO 14050:2009 | 2009 | Environmental Management- Vocabulary Defines terms of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards ICS 01.040.13 |
169 | Tshs 175,000/= USD 175 |
TZS 1119:2018 (2nd Ed) ISO /TR 14032:1999 | 2018 | Environmental management — Examples of environmental performance evaluation (EPE) Technical Report provides examples of EPE that represent a range of applications from simple to elaborate. They also represent a range of organizations (e.g., manufacturing and service compa ICS 13.020.10 |
93 | Tshs 100,000/= USD 100 |
TZS 1118:2018 (2nd Ed) ISO 14031:2013 | 2018 | Environmental management — Environmental performance evaluation — Guidelines Guidance on the design and use of environmental performance evaluation (EPE) within an organization. It is applicable to all organizations, regardless of type, size, location and complexity ICS13.020.10 |
38 | Tshs 45,000/= USD 45 |
TZS 1117: 2018 (2nd Ed) ISO 14015:2001 | 2018 | Environmental management — Environmental assessments of sites and organization (EASO) Provides guidance on how to conduct an EASO through a systematic process of identifying environmental aspects and environmental issues and determining, if appropriate, their business consequ ICS: 13.020.10 |
19 | Tshs 25,000/= USD 25 |
TZS 1116:2009 (1st Ed) | 2009 | Management of mercury in small scale gold mining and refining-Code of practice Prescribe the guidelines which will increase awareness and encourage the best practices for management of mercury in small/artisanal mining activities for gold extraction as well as for gold ICS 13.020.01 |
4 | TZS 10,000/-USD 10 |
TZS 1115: 2009 (1st Ed) | 2009 | The petroleum products retail outlets Prescribes guidelines and requirements for the design, materials, construction and layouting of motor fuel dispensing facilities. It also includes facilities for the storage of liquids, pipi ICS: 75.200 |
17 | Tshs 25,000/= USD 25 |
ZS 1114:2015 (2nd Ed) | 2015 | Road transport vehicles, containers and equipment used for the transportation of dangerous petroleum products Standard for road transport vehicles, containers and equipment shall be used for the transportation of dangerous petroleum products. Dangerous petroleum products include petrochemicals, avia ICS: 75.200 |
44 | Tshs 50,000/= USD 50 |
TZS 1113:2009 (1st Ed) | 2009 | Depots for the storage of petroleum products Prescribes the technical requirements relating to the design, materials, construction, testing and layout of bulk plant depots and terminals used for the storage of petroleum products and al ICS: 75.200 |
45 | Tshs 50,000/= USD 50 |
TZS 1108:2017(2nd Ed) ISO 6598: 1985 | 2017 | Fertilizers- Determination of phosphorous content- Quinoline phosphomolybdate- Gravimetric method Specifies a gravimetric method using quinolone phosphomolybdate for the determination of phosphorus (expressed as diphosphoruspentaoxide) in a solution prepared from natural mineral phosphat ICS 65.080 |
3 | TZS 10,000/-USD 10 |
TZS 1107: 2009 (1st Ed) -ISO 10084: 1992 | 2009 | Solid fertilizers – Determination of mineral – acid- soluble sulphate content- Gravimetric method Specifies method for the gravimetric determination of the mineral- acid-soluble sulphate content of solid fertilizers ICS 65.080 |
3 | Tshs 10,000/= USD 10 |
TZS 1106:2009 (1st Ed)- ISO 7497: 1984 | 2009 | Fertilizers – Extraction of phosphates soluble in mineral acids Specifies a method for the extraction of mineral acid-soluble phosphates by attack with a mixture of hydrochloric and nitric acid acids and a method by attack with a mixture of sulfuric and ICS 65.080 |
2 | TZS 10,000/-USD 10 |
TZS 1105:2017 (2nd Ed) ISO 5316: 1977 | 2017 | Fertilizers – Extraction of water-soluble phosphate Specifies a method for the extraction of water-soluble phosphorus (V) oxide from fertilizers ICS 65.080 |
3 | TZS 10,000/-USD 10 |
TZS 1104:2017 | 2017 | Ethanol Gel for domestic Heating – Specification Specifies the requirement, test methods and sampling procedure for ethanol gel intended for domestic heating and cooking ICS: .75.160.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1099: 2017 (2nd Ed) | 2017 | Automotive biodiesel fuel- Specification Specifies requirements and test methods for pure biodiesel (B100) used as automotive diesel fuel for diesel engines at 100% concentration ICS 75.160.20 |
15 | Tshs. 20,000/= USD 20 |
TZS 1097: 2017 | 2017 | Wet mops — Specification Specifies the requirements, methods of sampling and testing of wet mops head with cotton or polyester cotton or any other suitable material strands with a handle ICS: 97.180 |
5 | TZS 10,000/-USD 10 |
TZS 1095: 2017 | 2017 | Sweeping brooms — Specification Specifies the requirements, methods of sampling and test for sweeping brooms used for cleaning surfaces ICS: 97.080 |
6 | Tshs. 15,000/= USD 15 |
TZS 1094: 2017 | 2017 | Painters’ brushes — Specification Specifies the requirements, test methods and sampling procedure for painters’ brushes intended to be used for painting, decorations and other general purpose ICS: 97.080 |
11 | Tshs 20,000/= USD 20 |
TZS 1093-14:2017 (2nd Ed) ISO 10545-14: 2015 | 2017 | Ceramic tiles – Part 14: Determination of resistance to stains Specifies a method for determining the resistance to stains of the proper surface of ceramic tiles ICS 91.100.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1093-13:2017 ISO 10545-13: 1995 | 2017 | Ceramic Tiles-Part 13: determination of chemical resistance Specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles ICS: 91.100.20 |
2 | TZS 10,000/-USD 10 |
TZS 1093-12:2017 ISO 10545-12: 1995 | 2017 | Ceramic tiles- Part 12: Determination of frost resistance Specifies a method for determining the frost resistance of all ceramic tiles intended for use in freezing conditions in the presence of water ICS 91.100.20 |
2 | TZS 10,000/-USD 10 |
TZS 1093-11:2017 (2nd Ed) ISO 10545-11: 1994 | 2017 | Ceramic tiles – Part 11: Determination of crazing resistance for glazed tiles Defines a test method for determining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product. ICS 91.100.20 |
3 | TZS 10,000/-USD 10 |
TZS 1093-10:2017 (2nd Ed) ISO 10545-10: 1995 | 2017 | Ceramic tiles- Part 10: Determination of moisture expansion Specifies a method for determining the moisture expansion of ceramic tiles ICS 91.100.20 |
3 | Tshs 10,000/= USD 10 |
TZS 1093-9: 2017 (2nd Ed) ISO 10545-9: 2013 | 2017 | Ceramic tiles – Part 9: Determination of resistance to thermal shock Defines a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use ICS 91.100.20 |
2 | TZS 10,000/-USD 10 |
TZS 1093-8:2017 (2nd Ed)- ISO 10545-8: 2014 | 2017 | Ceramic tiles- Part 8: Determination of liner thermal expansion Defines a test method for determining the coefficient of liner thermal expansion of ceramic tiles ICS 91.100.20 |
2 | TZS 10,000/-USD 10 |
TZS1093-7:2009 ISO -10545-7: 1996 | 2009 | Ceramic tiles- Part 7: Determination of resistance to surface abrasion for glazed tiles Specifies a method for determining the resistance to surface abrasion of all glazed ceramic tiles used for floor covering ICS 91.100.20 |
9 | Tshs. 15,000/= USD 15 |
TZS 1093-6:2009 (1st Ed) ISO 10545-6: 1995 | 2009 | Ceramic tiles – Part 6: determination of resistance to deep abrasion for unglazed tiles Specifies a test method for determining the resistance to deep abrasion of all unglazed ceramic tiles used for floor coverings. ICS 91.100.20 |
4 | TZS 10,000/-USD 10 |
TZS 1093-5:2009 (1st Ed) ISO10545-5:1996 | 2009 | Ceramic tiles – Part 5: Determination of impact resistance by measurement of coefficient of restitution Specifies a test method for determining the impact resistance of ceramic tiles by measuring the coefficient of restitution ICS 91.100.20 |
7 | Tshs. 15,000/= USD 15 |
TZS 1093-4: 2009 (1st Ed)- ISO 10545: 2004 | 2009 | Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength Defines a test method for determining the modulus of rupture and breaking strength of all ceramic tiles ICS 91.100.20 |
6 | Tshs. 15,000/= USD 15 |
TZS 1093-3:2009 - ISO 10545-3: 1995 | 2009 | Ceramic Tiles-Part 3: Determination of water absorption, apparent porosityapparent relative density and bulk density Specifies methods for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles ICS 91.100.23 |
3 | TZS 10,000/-USD 10 |
TZS 1093-2:2009 (1st Ed) ISO 10545-2: 1995 | 2009 | Ceramic tiles - Part 2: Determination of dimensions and surface quality Specifies methods for determining the dimensional characteristics (length, width, and thickness, straightness of sides, rectangularity and surface flatness) and the surface quality of cerami ICS 91.100.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1093-1:2009 (1st Ed)- ISO 10545-1:1995 | 2009 | Ceramic Tiles-Part 1: Sampling and basis for acceptance Specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles ICS 91.100.20 |
5 | TZS 10,000/-USD 10 |
TZS 1092: 2009 (1st Ed) | 2009 | Textiles - specification for spun polyester sewing threads Specifies the requirements and methods of sampling and test for synthetic sewing threads spun from polyester fibres ICS 59.080.99 |
6 | Tshs. 15,000/= USD 15 |
TZS 1091 (Part 2): 2009 (1st Ed) | 2009 | Textiles – Specification for pun yarns. (Part 2): Yarns for knitting Prescribes the requirements and methods of sampling and test methods for 100% spun polyester yarn intended for knitting ICS 59.080.20 |
5 | TZS 10,000/-USD 10 |
TZS 1090 (Part 1): 2009 (1st Ed) | 2009 | Textiles – Specification for spun yarns (Part 1): Yarns for weaving Prescribes the requirements and methods of sampling and test methods for 100% spun polyester yarns intended for weaving by using conventional looms ICS 59.080.20 |
4 | TZS 10,000/-USD 10 |
TZS 1641:2013 ISO 6805:1994 | 2013 | Rubber hoses and hose assemblies for underground mining- Wire-reinforced hydraulic types for coal mining- Specification Specifies requirements for six types of embedded-wire hose and hose assembly of bore diameter from 5 mm to 51 mm for use with common hydraulic fluids such as mineral oils, soluble oils, oil ICS.83.140.40 |
7 | TSHS 15,000/= USD 15 |
TZS 1640:2013 ISO 3949:2009 | 2013 | Plastics hoses and hose assemblies- Textile- reinforced types for hydraulic applications- Specification Specifies requirements for three types of textile- reinforced thermoplastics hose and hose assembly of nominal size from 3, 2 to 25. ICS.83.140.40 |
13 | TSHS 20,000/= USD 20 |
TZS 1639:2013-ISO 3862:2009 | 2013 | Rubber hoses and hose assemblies- Rubber- covered spiral- wire- reinforced hydraulic types for oil- based or water-based fluids- Specification Specifies requirements for five types of spiral- wire- reinforced hydraulic hose and hose assembly of nominal size from 6, 3 to 51. ICS.83140.40 |
13 | TSHS 20,000/= USD 20 |
TZS 1638:2013(1st Ed) ISO 1436:2009 | 2013 | Rubber hoses and hose assemblies- Wire-braid-reinforced hydraulic types for oil-based or water- based fluids- Specification Specification requirements for six types of wire-braid- reinforced hose and hose assembly of nominal size from 5 to 51, plus, for one of the types (type R2ATS), nominal size 63. ICS. 83.140.40 |
12 | TSHS 20,000/= USD 20 |
TZS 1637:2013(1st Ed) ISO 1307:2006 | 2013 | Rubber and plastics hoses- Hose sizes, minimum and maximum inside diameters and tolerance on cut- to- length hoses Specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. It is also specifies tolerance on cut-to-length rubber and plastic ICS: 83.140.40 |
3 | TSHS 10,000/= USD 10 |
TZS 1636:2013(1st Ed) ISO 18752:2012 | 2013 | Rubber hoses and hose assemblies- Wire-or-textile-reinforced single pressure types for hydraulic application- Specification. Specifies requirements for ten classes, four grades and seven types of wire-or textile-reinforced hydraulic hoses and hose assemblies of nominal size ranging from 5 to 12. ICS. 23.040.70 |
15 | TSHS 20,000/= USD 20 |
TZS 1635:2013(1st Ed) ISO 4079:2009 | 2013 | Rubber hoses and hose assemblies- Textile-reinforced hydraulic types for oil- based or water-based fluids- Specification Specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. ICS.83.140.40 |
13 | TSHS 20,000/= USD 20 |
TZS 1634-2:2013(1st Ed) EAS 147-2:2000 | 2013 | Vinegar- Specification Part 2: Vinegar form artificial sources Prescribe the quality requirements and methods of test for substitute vinegar. ICS: 67.220.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1634-1:2013(1st Ed) EAS 147-1:2000 | 2013 | Vinegar- Specification Part 1: Vinegar form natural sources Prescribes requirements and methods of sampling and test for vinegar derived by fermentation from suitable raw materials of agricultural or silvicultural origin. ICS:67.220.20 |
5 | TSHS 10,000/= USD 10 |
TZS 1086: 2018- EAS 892: 2017 | 2018 | Fresh sweet banana — Specification Specifies the requirements, sampling and test methods for fresh sweet banana of Musa spp, Musaceae family, in an unripe or ripe state, to be supplied to the consumer. Bananas intended for co ICS: 67.080.10 |
8 | Tshs 15,000/= USD 15 |
TZS 1085: 2015 | 2015 | Fresh cabbage—Specification Prescribes the requirements and methods of sampling and test for fresh cabbages, Brassica oleracea, variety capitata (L.) intended for human consumption ICS: 67 080.20 |
8 | Tshs. 15,000/= USD 15 |
TZS 1084:2014 (2nd Ed)- EAS 756:2013 | 2014 | Dry pigeon peas — Specification Specifies the requirements and methods of sampling and test for dry pigeon peas of the varieties (cultivars) grown from Cajanus cajan Linn. intended for human consumption ICS 67.060 |
5 | TZS 10,000/-USD 10 |
TZS 1083: 2017 (3rd Ed)- EAS 762: 2017 | 2017 | Dry soybeans — Specification Specifies requirements, sampling and test methods for dry soybeans of varieties (cultivars) grown from Glycine max (L.) Merr. Intended for human consumption ICS 67.060 |
6 | Tshs. 15,000/= USD 15 |
TZS 1082: 2015 | 2015 | Dried banana — Specification Prescribes requirements and methods of sampling and test for dried banana from Musa spp. of the family Musaceae intended for direct human consumption or for other use in the food industry ICS: 67.080 |
11 | Tshs. 20,000/= USD 20 |
TZS 1079: 2009 (1st Ed) | 2009 | Installation of underground storage tanks, pumps/ dispensers and pipework at service stations and consumer installation Covers provisions for the installation of underground storage tanks of individual capacity not exceeding 85 000 1, pumps/ dispensers and pipework at service stations and consumer installatio ICS 75. 200, |
28 | Tshs 35,000/= USD 35 |
TZS 1076: 2009 (1st Ed) | 2009 | Selection, specification, installation, operation and maintenance of automatic liquid level and temperature measuring instruments on petroleum storage tanks Gives guidance on the selection, specification, installation, operation and maintenance of mechanical and servo- operated automatic tank gauging system measuring level and temperature in pet ICS 75. 200 |
25 | Tshs 30,000/= USD 30 |
TZS 1074: 2009 (1st Ed) -ISO 12922: 1999 | 2009 | Lubricants, industrial oils and related products (class L)- Family H (hydraulic systems) Specifications for categories HFAE, HFAS. HFB, HFC, HFDR AND HFDU Specifies the requirements of fire-resistance hydraulic fluids for hydrostatic and hydrodynamic hydraulic systems in general industrial applications. It is not used in aerospace or power gen ICS 75.100 |
8 | Tshs. 15,000/= USD 15 |
TZS 1073: 2018(2nd Ed) -ISO 15380: 2002 | 2018 | Lubricants, industrial oils and related products (class L)-Family H (Hydraulic systems- Specification for categories HETG, HEPG HEES and HEPR Specify the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems particularly hydraulic fluid power systems. ICS 75.100 |
19 | Tshs 25,000/= USD 25 |
TZS 1072: 2018 (2nd Ed)- ISO 11158: 2009 | 2018 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG Specifies the minimum requirements for new mineral oil hydraulic fluids and is intended for hydraulic systems, particularly for hydrostatic hydraulic fluid power application. The purpose of ICS 75.100 |
15 | Tshs. 20,000/= USD 20 |
TZS 1066(Part 99): 2009 (1st Ed)- ISO 6743-99: 2002 | 2009 | Lubricants, industrial oils and related products (class L) — Classification —General Establishes a general system of classification, which applies to lubricants, Industrial oils and related products, designated by the prefix letter ‘L’. ICS 75.100 |
3 | TZS 10,000/-USD 10 |
TZS 1065:2018 (2nd Ed) ISO 3448:1992 | 2018 | Industrial liquids lubricants-ISO viscosity classification Establishes a system of viscosity classification for industrial liquid lubricants and related fluids. This includes mineral oils used as lubricants, hydraulic fluids and electrical oils ICS 75.100 |
4 | TZS 10,000/-USD 10 |
TZS 1064 (Part 3): 2008 (1st Ed) | 2008 | Tyres, valves and tubes – List of equivalent - Part 3: Tubes Presents a list of equivalent terms relating to tubes in English, French and Russian as used in the tyre industry ICS 01.040.83 |
3 | Tshs 10,000/= USD 10 |
TZS 1064 (Part 2):2008 (1st Ed) ISO 3877-2: 1997 | 2008 | Tyres, valves and tubes – List of equivalent - Part 2: Tyre values Presents a list of equivalent tyre valve terms commonly use in the tyre industry ICS: 01.040.83 |
19 | Tshs 25,000/= USD 25 |
TZS 1064 (Part 1): 2008 (1st Ed) -ISO 3877-1: 1997 | 2008 | Tyres, valves and tubes – List of equivalent Presents a list of equivalent tyre terms commonly use in the tyre industry ICS 01.040.83 |
23 | Tshs. 30,000/= USD 30 |
TZS 1627: 2018- EAS 891: 2017 | 2018 | Fresh carrot — Specification Specifies requirements, sampling and test methods for carrots of varieties (cultivars) grown from Daucus carota (L.) of Apiaceae family to be supplied fresh to the consumer. ICS: 67.080.10, |
7 | TSHS 15,000/= USD 15 |
TZS 1626:2018(3rd Ed) EAS 146: 2018 | 2018 | Rum — Specification Specifies the requirements and methods of sampling and test for brown rice of the varieties grown from Oryza spp., intended for human consumption or for processing to milled rice. ICS: 67.160.10 |
3 | TSHS 10,000/= USD 10 |
TZS 1625:2013(1st Ed) | 2013 | Cultured sour milk- Specification Specifies requirements, methods of sampling and test for cultured sour milk. ICS: 67.100.10 |
4 | TSHS 10,000/= USD 10 |
TZS 1620: 2013(1st Ed) | 2013 | Disaster management and business continuity programs — An assessment and implementation tool Establishes a common set of criteria for disaster management, emergency management, and business continuity programs hereinafter referred to as the program. ICS: 03.100.01 |
38 | TSHS 45,000/= USD 45 |
TZS 1619: 2014(1st Ed) | 2014 | Textiles — Disposable underpads — Specification Specifies the requirements for two types of disposable underpads used during child birth and protection against incontinence. ICS: 59.080.30 |
3 | TSHS 10,000/= USD 10 |
TZS 1618:2014(1st Ed) | 2014 | Textile- Disposable adult diapers- Specification Specifies the requirements for disposable adult diapers. ICS: 59.080.30 |
7 | TSHS 15,000/= USD 15 |
TZS 1617:2014(1st Ed) | 2014 | Textiles-Specification for green surgical fabric for gowns and drapery Specifies requirements for the performance of green coloured surgical gowns and drapes materials used in the operation theatre. ICS: 11.040.30 |
6 | TSHS 15,000/= USD 15 |
TZS 1616: 2014(1st Ed) ISO 2336-1: 1996 | 2014 | Hacksaw blades — Part 1: Dimensions for hand blades Specifies the dimensions of hand hacksaw blades. ICS.25. 100.40 |
2 | TSHS 10,000/= USD 10 |
TZS 1615: 2014(1st Ed) ISO 525: 1999 | 2014 | Bonded abrasive products — General requirements Covers bonded abrasive products in general (grinding wheels, segments, sticks and stones) excluding abrasive products with diamond or cubic boron nitride. It gives the designation, the main ICS.25.100.70 |
19 | TSHS 25,000/= USD 25 |
TZS 1614:2014(1st Ed) ISO 1035-3:1980 | 2014 | Hot-rolled steel bars — Part 3: Dimensions of flat bars Specifies dimensions of metric series hot- rolled steel round bars ICS. 25.100.70 |
1 | TSHS 10,000/= USD 10 |
TZS 1607:2014(1st Ed) EAS 782:2013 Composite flour — Specification | 2014 | Composite flour — Specification Specifies requirements and methods of sampling and test for composite flour intended for human consumption. ICS. 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1606:2014(1st Ed) EAS 779: 2013 | 2014 | High quality cassava flour — Specification Specifies requirements and methods of sampling and test for high quality cassava flour, which is obtained from the processing of cassava (Manihot esculenta Crantz), intended for human consum ICS 67.060 |
5 | TSHS 10,000/= USD 10 |
TZS 1603:2014(1st Ed) | 2014 | Textiles — Tarpaulins made from high density polyethylene woven fabric — Specification Prescribes the construction details and other requirements for tarpaulins having minimum mass of 200 g/m2. ICS. 59.080.30 |
8 | TSHS 15,000/= USD 15 |
TZS 1602:2014 | 2014 | Textile — Specification for knitted sweater Specifies the requirements and method of test for bleached or dyed knitted sweater. Does not specify the general appearance, feel, luster or degree of colour of the sweater. ICS. 61.020 |
11 | TSHS 20,000/= USD 20 |
TZS1601:2013(1st Ed) | 2013 | Textiles — Hair extensions — Specification Prescribes the requirements and test methods for hair extensions made from synthetic fibres for use on human beings. It shall not be applicable to the natural human hairs. ICS. 71.100 |
15 | TSHS 20,000/= USD 20 |
TZS 1600:2013(1st Ed) | 2013 | Textiles — a-twill jute bags — specification Prescribes the technical requirements relating to the manufacture of A-Twill jute bags and does not purport to include all the provisions of a contract. ICS. 59.060 |
4 | TSHS 10,000/= USD 10 |
TZS 1598:2013(1st Ed) | 2013 | Ricotta Cheese-Specification Specifies requirements, methods of test and sampling for Ricotta cheese intended for direct consumption or for further processing. ICS: 67.100.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1597:2013(1st Ed) | 2013 | Caciotta cheese Specifies requirements, methods of test and sampling for Caciotta cheese intended for direct consumption or for further processing ICS: 67.100.30 |
4 | TSHS 10,000/= USD 10 |
TZS 1592-2:2013 ISO 4249-2:1990 | 2013 | Motorcycle tyre and rims (Code- designated series)- Part 2: Tyre load ratings Specifies the load ratings for an inch code-designated series of tyres for motorcycles. ICS: 43.140 |
4 | TSHS 10,000/= USD 10 |
TZS 1592-1:2013 ISO 4249-1:1985 | 2013 | Motorcycle tyre and rims (Code- designated series) Part 1: Tyres Designation in use and the dimensions for an inch code designated series of tyres for motorcycles. ICS: 43.140 |
4 | TSHS 10,000/= USD 10 |
TZS 1591:2013(1st Ed) | 2013 | Motorcycle and scooter tyres-Specification Prescribe the requirements and methods of sampling and test for motorcycle and scooter tyres. ICS: 83.160.10 |
13 | TSHS 20,000/= USD 20 |
TZS 1590:2013 ISO 22300:2012 | 2013 | Societal security- Terminology Contains terms and definitions applicable to societal security to establish a common understanding so that consistent terms are used. ICS: 03.100.01 |
11 | TSHS 20,000/= USD 20 |
TZS 1589:2013 ISO 22301:2012 | 2013 | Societal security- Business continuity management systems- Requirements Specifies requirements to plan, establish, implement, operate, monitor, review, maintain and continually improve a documented management system to protect against, reduce the likelihood of o ICS: 03.100.01 |
24 | TSHS 30,000/= USD 30 |
TZS 1588:2013 ISO 22320:2011 | 2013 | Societal security –Emergency management- Requirements for incident response Specifies minimum requirements for effective incident response and provide the basics for command and control, operational information, coordination and cooperation within an incident respon ICS: 03.100.01 |
21 | TSHS 30,000/= USD 30 |
TZS 1587:2013(1st Ed) ISO 10014:2006 | 2013 | Quality management- Guidelines for realizing financial and economic benefits Provides guideline for realizing financial and economic benefits from the application of the ISO 9000 quality management principles. ICS: 120.10 |
25 | TSHS 30,000/= USD 30 |
TZS 1586:2013(1st Ed) ISO 19011:2011 | 2013 | Guidelines for auditing management systems. Provide guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audit as well as guidance on the evaluatio ICS.03.120.10 |
44 | TSHS 50,000/= USD 50 |
TZS 1585:2013(1st Ed) | 2013 | Specification for road humps and rumbles strips Specifies the requirements for design and construction of road humps and rumble strips, intended for use in speed control on paved roads and highways. ICS 93.080.20 |
8 | TSHS 15,000/= USD 15 |
TZS 1578: 2012 | 2012 | Sunflower seeds ― Specification Specifies requirements and methods of sampling and test for sunflower (Helianthus annuus, Linnaeus) seeds for oil milling. ICS: 67.200.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1583: 2013 | 2013 | Processed cultivated edible mushrooms – Specification Prescribes requirements and methods of sampling and tests for processed mushrooms of cultivated edible species to be supplied for export and local markets. ICS: 67.080.20 |
11 | TSHS 20,000/= USD 20 |
TZS 1573: 2017 ISO 9087:1998 | 2017 | Wood- Determination of nail and screw holding power under axial laod application. Specifies a method for determining the specific resistance of wood to the extraction of nails and screws. ICS 91.080.20 |
3 | TSHS 10,000/= USD 10 |
TZS 1571: 2015 | 2015 | Rural and urban addressing Provides requirements for assigning addresses in urban and rural areas; naming roads, streets, buildings and localities; recording and mapping the related information; assigning postcodes; a ICS: 01.080.10 |
28 | TSHS 35,000/= USD 35 |
TZS 1569:2014(1st Ed) EAS 800:2013 | 2014 | Soya milk — Specification Specifies requirements and methods of sampling and test for soya milk intended for human consumption. ICS: 67.060 |
4 | TSHS 10,000/= USD 10 |
TZS 1568 (Part 2): 2012 | 2012 | Method for determination of iron in flours – Quantitative Spectrophotometric method for determination of Total Iron and Iron from Ferrous Sulphate in Flours and Premixes Prescribes a reference method for quantitative spectrophotometric method for determination of total iron and iron from ferrous sulphate contents in flours and premixes ICS: 67.050 |
9 | TSHS 15,000/= USD 15 |
TZS 1568-1: 2013 (1st Ed | 2013 | Method for determination of iron in flours – Part 1: Spot tests for determining added iron in fortified flour Prescribes a routine method of spot tests for determination of added iron in fortified flours ICS 67.050 |
5 | TSHS 10,000/= USD 10 |
TZS 1567-3: 2013 (1st Ed) | 2013 | Determination of vitamins in flours- Part 3: Determination of riboflavin (vitamin B2) content in fortified flours - high performance liquid chromatography method Prescribes a reference test method for determination of riboflavin (vitamin B2) content in fortified flours by high performance liquid chromatography. ICS 67.050 |
6 | TSHS 15,000/= USD 15 |
TZS 1567-2: 2013 (1st Ed) | 2013 | Determination of vitamins in flours – Part 2: Determination of Vitamin A content in flours by high performance liquid chromatography method Prescribes a reference method for determination of vitamin A content in flours by High Performance Liquid Chromatography (HPLC) ICS 67.050 |
8 | TSHS 15,000/= USD 15 |
TZS 1567-1: 2013 (1st Ed) | 2013 | Determination of Vitamins in Flours – Part 1: Qualitative method for Determination of vitamin A in flours Prescribe routine qualitative method for determination of vitamin A in flours. ICS 67.050 |
4 | TSHS 10,000/= USD 10 |
TZS 1564:2014 | 2014 | Fat and oil derivatives- Fatty Acid Methyl Esters (FAME)- Determination of methanol content Specifies a method for the determination of methanol content in fatty acid methyl esters (FAME) for use as diesel fuel and domestic heating fuel. The method is applicable for a concentration ICS: 67.200.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1563:2014 | 2014 | Fat and oil derivatives- Fatty Acid Methyl Esters (FAME)- Determination of potassium content by atomic adsorption spectrometry Specifies a method for the determination of potassium content equal to or greater than 0.5 mg/kg. This method is applicable to fatty acid methyl esters intended for addition to mineral oils. ICS: 67.200.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1562:2013(1st Ed) | 2013 | Fat and oil derivatives- Fatty Acid Methyl Ester (FAME)-Determination of sodium content by atomic absorption spectrometry Specifies a method for the determination of sodium content equal to or greater than 1 mg/kg in Fatty Acid Methyl Esters (FAME) ICS 67.200.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1561:2013(1st Ed) | 2013 | Fat and oil derivatives- Fatty Acid Methyl Esters (FAME)- Determination of phosphours content by Inductively Coupled Plasma (ICP) emission spectrometry) Specifies inductively coupled plasma (ICP) emission spectrometry method for the determination of phosphorus content between 4 mg/kg and 20 mg/kg in Fatty Acid Methyl Esters, hereinafter refe ICS 67.200.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1557:2013(1st Ed) | 2013 | Fat and oil derivatives- Fatty Acid Methyl Esters (FAME)-Determination of ester and linolenic acid methyl ester contents Describe a procedure for the determination of the ester content in Fatty Acid Methyl Esters (FAME). It also allows determining the linolenic acid methyl ester content. ICS 67.200.10 |
8 | TSHS 15,000/= USD 15 |
TZS 1063 (Part 2): 2008 (1st Ed) -ISO 3739-2: 1992 | 2008 | Industrial tyres and rims Part 2: Pneumatictyres (metric services) on 5º tapered or flat base rims-load ratings Specifies the load ratings of the metric series pneumatic tyres primarily intended for industrial vehicles for use on prepapred surfaces ICS 83.160.99 |
2 | TZS 10,000/-USD 10 |
TZS 1550: 2020 (2nd Ed) | 2020 | Textile - Woven handkerchief performance – Specification Describe the requirements and construction details for handkerchiefs. ICS 61.040 |
5 | TSHS 10,000/= USD 10 |
TZS 1063 (Part 1): 2008 (1st Ed) -ISO 3739-1: 2007 | 2008 | Industrial tyre and rims (Part 1): Pneumatic tyres (metric services) on 5º tapered or flat base rims-designation, dimensions and marking Specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and marking ICS 83.160.99 |
12 | Tshs. 20,000/= USD 20 |
TZS 1062: 2008 | 2008 | Concrete manhole and inspection chambers, unreinforced, steel fibre and reinforced Specifies performance requirements and describes test methods for precast concrete units for inspection chambers designed to be used for inverts not exceeding 2 meters deep and manholes, of ICS 93.080.30 |
52 | Tshs 60,000/= USD 60 |
TZS 1061: 2008- ISO 4998: 2005 | 2008 | Continuous hot-dip zinc-coated carbon steel sheet of structural qualities Applies to continuous hot-dip zinc-and zinc and iron-alloy-coated carbon steel sheet of structural quality. Zinc coated structural quality sheet is produced in thickness from 0.25 mm to 5 mm ICS 77.140.50 |
13 | Tshs 20,000/= USD 20 |
TZS 1549: 2012 (1st Ed) | 2012 | Textile - Lining fabric specification Prescribes constructional details and other requirements for woven fabrics and warp knitted fabrics for linings in garments. Requirements are specified for construction, mass per unit area, ICS 59.080.30 |
13 | TSHS 20,000/= USD 20 |
TZS 1060: 2008 ISO 9364: 2001 | 2008 | Continuous hot-dip aluminum/zinc-coated steel sheet of commercial, drawing and structural qualities Specifies the characteristics of steel of commercial, drawing and structural qualities coated by a continuous hot-dip aluminum/zinc alloy coating process ICS 77.140.50 |
16 | Tshs 25,000/= USD 25 |
TZS 1548 (Part 2): 2018(2nd Ed) ISO 10322-2:2016 | 2018 | Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses Specifies requirements for the optical geometrical properties of semi- finished progressive power spectacle lens blanks. ICS 11.040.70 |
8 | TSHS 15,000/= USD 15 |
TZS 1548 (Part 1):2018(2nd Ed)- ISO 10322-1: 2016 | 2018 | Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks Specifies requirements for the optical and geometrical properties of all semi-finished single-vision and multifocal spectacle lens blanks ICS 11.040.70 |
10 | TSHS 15,000/= USD 15 |
TZS 1059: 2008 ISO 3575: 2005 | 2008 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities Applies to carbon steel sheet of commercial and drawing qualities coated by the continuous hot-dip zinc-coating process. Zinc coated sheet is produced in thickness from 0.25 mm to 5mm inclus ICS 77.140.50 |
14 | Tshs. 20,000/= USD 20 |
TZS 1547: 2012 ISO16034:2002 | 2012 | Ophthalmic optics - Specification for single - vision ready – to - wear near - vision spectacles Specifies the minimum requirements for complete single-vision ready- to –wear near vision spectacles. ICS 11.040.70 |
3 | TSHS 10,000/= USD 10 |
TZS 1058 (Part1): 2008- ISO 6934-1: 1991 | 2008 | Steel for the prestressing of concrete General requirements Specifies requirements for high tensile steel to be used in prestressed concrete. It applies only to materials in the condition as supplied by the manufacturers. It does not cover requiremen ICS 77.140.15 |
7 | Tshs. 15,000/= USD 15 |
TZS 1056: 2008- ISO 7165: 1999 | 2008 | Firefighting – Portable fire extinguishers – Performance and construction Specifies the principal requirements intended to ensure the safety, reliability and performance of portable fire extinguishers ICS: 13.220.10 |
43 | Tshs 50,000/= USD 50 |
TZS 1053: 2008 -ISO 7864: 1993 | 2008 | Sterile hypodermic needles for single use Specifies requirements for sterile hypodermic needles for single use of nominal outside diameters 0,3 and 1,2mm. It does not apply to dental needless ICS 11.040.25 |
11 | Tshs. 20,000/= USD 20 |
TZS 1052:2017 -ISO 6009: 2016 | 2017 | Hypodermic needles for single use — Colour coding for identification Establishes a colour code for the identification of single-use hypodermic needles of designated metric sizein the range of 0,18 mm (34 Gauge) to 3,4 mm (10 Gauge). It applies to regular-wall ICS 11.040.25 |
6 | Tshs. 15,000/= USD 15 |
TZS 1051 (Part 2): 2008 ISO 595-2: 1987 | 2008 | Reusable all-glass or metal-and-glass syringes for medical use – Part 2: Design, Performance requirements and tests Specifies the design, performance and the corresponding test methods for reusable syringes having a graduated capacity from 1 to 100ml, for general medical use ICS: 11.040.25 |
3 | TZS 10,000/-USD 10 |
TZS 1051 (Part 1): 2008 ISO 595-1: 1986 | 2008 | Reusable all-glass or metal- and-glass syringes for medical use – Part 1: Dimensions Specifies dimensions for reusable all-glass or metal-and-glass syringes for medical use, having a graduated capacity from 1 to 100 ml. it also specifies requirements for the graduated capaci ICS: 11.040.25 |
6 | Tshs. 15,000/= USD 15 |
TZS 1018: 2015(2nd Ed)- EAS 144:2014 | 2015 | Neutral (fine) spirit – Specification Prescribes the requirements and methods of sampling and test for neutral or fine spirit to be used for the production of potable alcoholic beverages ICS: 67.160.10 |
4 | TZS 10,000/-USD 10 |
TZS 1017: 2008 (1st Ed) ISO 7408: 1983 | 2008 | Fertilizers – Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide – Titrimetric method Specifies a method for the determination of the ammoniacal nitrogen content of fertilizers containing other substances, such as urea or urea-aldehyde condensates, which release ammonia in th ICS: 65.080 |
5 | TZS 10,000/-USD 10 |
TZS 1016: 2017 (2nd Ed) ISO 5314: 1981 | 2017 | Fertilizers — Determination of ammoniacal nitrogen content — Titrimetric method after distillation Specifies a titrimetric method, after distillation, for the determination of the ammoniacal nitrogen content of fertilizers ICS: 65.080 |
4 | TZS 10,000/-USD 10 |
1006. TZS 1015: 2017 (2nd Ed) ISO 5315: 1984 TZS 1015: 2017 (2nd Ed)- ISO 5315: 1984 | 2017 | Fertilizers – Determination of total nitrogen content – Titrimetric method after distillation Specifies a titrimetric method, after distillation, for the determination of the total nitrogen content of fertilizers in all forms, including those which have to be digested ICS: 65.080 |
5 | TZS 10,000/-USD 10 |
TZS 1014:2017 (2nd Ed) ISO 8397: 1988 | 2017 | Solid fertilizers and soil conditioners — Test sieving Specifies a method for the determination of the particle size distribution of solid fertilizers and soil conditioners by test sieving ICS: 65.080 |
3 | TZS 10,000/-USD 10 |
TZS 1013:2017(2nd Ed)- ISO 8358: 1991 | 2017 | Solid fertilizers – Preparation of samples for chemical and physical analysis Specifies methods for the preparation of test samples and test portions from laboratory samples of solid fertilizer for subsequent chemical or physical analysis. ICS: 65.080 |
4 | TZS 10,000/-USD 10 |
TZS 1012: 2017 (2nd Ed) ISO 7410: 1983 | 2017 | Fertilizers and soil conditioners — Final samples — Practical arrangements Establishes practical arrangements relating to final samples of solid fertilizers and soil conditioners ICS: 65.080 |
1 | TZS 10,000/-USD 10 |
TZS 1011: 2017 (2nd Ed)- ISO 7742: 1988 | 2017 | Solid fertilizers — Reduction of samples Specifies a method suitable for the reduction of a sample of a solid fertilizer to a smaller quantity such as may be used for analysis or for further reduction after suitable comminution ICS: 65.080 |
6 | Tshs. 15,000/= USD 15 |
TZS 1010: 2017 (2nd Ed)- ISO 5306: 1983 | 2017 | Fertilizers — Presentation of sampling reports Specifies the information to be given in sampling reports for consignments of fertilizers ICS: 65.080 |
8 | Tshs. 15,000/= USD 15 |
TZS 1009: 2008 (1st Ed) | 2008 | Herbal soap – Specification Prescribes requirements and test methods for herbal soap ICS 71.100.40 |
3 | TZS 10,000/-USD 10 |
TZS 1008: 2015- EAS 145: 2014 | 2015 | Gin — Specification Specifies the requirements and methods of sampling and test for gin ICS: 67.160.10 |
3 | TZS 10,000/-USD 10 |
TZS 1007:2008 (1st Ed) | 2008 | Code of practice for the cleaning of petroleum storage tanks and disposal of sludge Specifies code of practice for the cleaning and disposal of sludge and scales. ICS: 87.040 |
21 | Tshs. 30,000/= USD 30 |
TZS 1006: 2009 (1st Ed) | 2009 | Metre rules and rulers for the school and office use – Specification Specifies the requirements for metre rules and rulers for schools and office use ICS: 17.040.30 |
4 | TZS 10,000/-USD 10 |
TZS 1004: 2018-(2nd Ed) EAS 864: 2017 | 2018 | Photocopy paper — Specification Specifies requirements, sampling and test methods for photocopy paper ICS: 85.080.10 |
5 | TZS 10,000/-USD 10 |
TZS 1003: 2017 (2nd Ed)- ISO 7558: 1988 | 2017 | Guide to the prepacking of fruits and vegetables Gives general guidance on the conditions and the methods of prepacking and packing for transport of the main types of fruits and vegetables sold fresh ICS: 67.080 |
5 | TZS 10,000/-USD 10 |
TZS 1002: 2009 (1st Ed) -ISO 874: 1980 | 2009 | Fresh fruits and vegetables – Sampling Specifies a method of sampling fresh fruits and vegetables, forming the subject of international trade, with the view to determining the quality or particular characteristics of the goods ICS.67.080 |
3 | TZS 10,000/-USD 10 |
TZS 1001: 2017(3rd Ed) EAS 329: 2017 | 20017 | Fresh mangoes – specification Specifies requirements, sampling and test methods for mango (Mangifera indica L.) from the family Anacardiaceae to be supplied fresh to the consumer. This standard does not apply to green pr ICS: 67.080.10 |
7 | Tshs. 15,000/= USD 15 |
TZS 1545: 2012 ISO 4660:2011 | 2012 | Rubber, raw natural – Colour index test Specifies a method of determining the colour of raw natural rubber according to a standard colour scale ICS: 83.040.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1544: 2012 ISO 248-1:2011 | 2012 | Rubber, raw – Determination of volatile matter content – Part 1: Hot-mill method and oven method Specifies two methods for the determination of volatile-matter content in raw rubbers by using a hot mill or an oven. ICS: 83.040.10 |
13 | TSHS 20,000/= USD 20 |
TZS 1543: 2012 ISO 2007:2007 | 2012 | Rubber, unvulcanized – Determination of plasticity – Rapid plastimeter method Specifies a method for the rapid determination of the plasticity of raw rubber and unvulcanized compounded rubber. It is applicable to the determination of the plasticity retention index (PR ICS: 83.040.10 |
3 | TSHS 10,000/= USD 10 |
TZS 1542: 2012 ISO 2930: 2009 | 2012 | Rubber, raw natural – Determination of plasticity retention index (PRI) Specifies a method for determining the plasticity retention index (PRI) of raw natural rubber. ICS: 83.040.10 |
7 | TSHS 15,000/= USD 15 |
TZS 1541: 2012 ISO 1795:2007 | 2012 | Rubber, raw natural and raw synthetic- Sampling and further preparative procedures Specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical and physical tests. ICS: 83.040.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1540:2012 ISO 1656:1996 | 2012 | Rubber, raw natural and rubber latex natural – Determination of nitrogen content Specifies a macro-method and a semi-micro method for the determination of nitrogen in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process. ICS: 83.040.10 |
12 | TSHS 20,000/= USD 20 |
TZS 1539: 2012 ISO 249: 1995 | 2012 | Rubber, raw natural- Determination of dirt content Specifies a method for the determination of the dirt content of raw natural rubber. It is not applicable to dirt present as surface contamination. ICS 83.040.10 |
6 | TSHS 15,000/= USD 15 |
TZS 1538: 2012 ISO 289-1: 2005 | 2012 | Rubber, unvulcanized - Determination using a shearing - disc viscometer- Part 1: Determination of Mooney viscosity Specifies method, using a shearing- disc viscometer for measuring the Moooney viscosity of uncompounded or compounded rubbers ICS 83.060 |
11 | TSHS 20,000/= USD 20 |
TZS 1537:2012 (1st Ed) ISO 289-1:2005 | 2012 | Rubber, unvulcanized - Determinations using a shearing - disc viscometer Part 1: Determination of mooney viscosity Specifies a method, using a shearing -disc viscometer, for measuring the Mooney viscosity of uncompounded or compounded rubbers. ICS 83.060 |
15 | TSHS 20,000/= USD 20 |
TZS 1536: 2012 (1st Ed) | 2012 | Spices and condiments - Cumin specification Prescribes the requirements and methods of sampling and test for fruitsof cumin (CuminumcyminumL.) ICS 67.220.10 |
5 | TSHS 10,000/= USD 10 |
TZS 1535: 2012 (1st Ed) | 2012 | Roasted cashew kernels – Specification Specifies requirements and methods of sampling and test for roasted cashew kernels obtained from nuts of cashew tree (Anacardiumoccidentale, L) ICS 67.200.20 |
4 | TSHS 10,000/= USD 10 |
TZS 1534: 2018 ISO 14889:2013 | 2018 | Ophthalmic optics - spectacle lenses- fundamental requirements for uncut finished lenses Specifies fundamental requirements for uncut finished spectacle lenses. This International Standard is not applicable to protective spectacle lenses. ICS 11.040.70 |
6 | TSHS 15,000/= USD 15 |
TZS 1533: 2012 ISO 10005:2005 | 2012 | Quality management system - Guidelines for quality plans Provide guidelines for the development, review, acceptance, application and revision of quality plans. It is applicable whether or not the organization has a management system in conformity ICS 03.120.10 |
23 | TSHS 30,000/= USD 30 |
TZS 1532: 2012 (1st Ed) | 2012 | Plastics creates for fruits and vegetables – Specification Prescribes the requirements, methods of sampling and test for rigid and collapsible plastic crates for holding and transporting fruits and vegetables. ICS 55.020 |
10 | TSHS 15,000/= USD 15 |
TZS 1531: 2012 (1st Ed) | 2012 | Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity Specifies general characteristics and test methods for determination of volume and carrying capacity of flexible carrier bags with handles for transport of various unspecified retail goods. ICS 55.020 |
13 | TSHS 20,000/= USD 20 |
TZS 1530: 2012 (1st Ed) ISO 247: 2006 | 2012 | Rubber - Determination of ash Specifies two methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or vulcanized rubbers of the M, N, O, ICS 83.060 |
6 | TSHS 15,000/= USD 15 |
TZS 1529: 2012 (1st Ed) | 2012 | Fruits and vegetables - Determination of sodium chloride in brine Prescribes method for the determination of sodium chloride in brine in fruits and vegetables ICS.67.080.01 |
5 | TSHS 10,000/= USD 10 |
TZS 1526: 2012 (1st Ed) ISO 14025: 1999 | 2012 | Environmental labels and declarations - (Type III) environmental declarations - principle and procedure Establishes the principles and specifies the procedures for developing Type III environmental declaration programmes and Type III environmental declarations. It specifically establishes the ICS 13.020.50 |
30 | TSHS 35,000/= USD 35 |
TZS 1525: 2012 (1st Ed) ISO 14024: 1999 | 2012 | Environmental labels and declarations - Type I environmental labeling - Principle and procedure Establishes the principles and procedures for developing Type I environmental labelling programmes, including the selection of product categories, product environmental criteria and product ICS 13.020.50 |
16 | TSHS 25,000/= USD 25 |
TZS 1524: 2012 (1st Ed) ISO 14021: 1999 | 2012 | Environmental labels and declarations - Self declared environmental claims (Type II) environmental labeling Specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in environmen ICS 13.020.50 |
27 | TSHS 35,000/= USD 35 |
TZS 1523: 2012 (1st Ed) ISO 14020: 2000 | 2012 | Environmental labels and declarations - General principles Establishes guiding principles for the development and use of environmental labels and declarations. ICS 13.020.50 |
9 | TSHS 15,000/= USD 15 |
TZS 1522: 2012 (1st Ed) ISO 24511: 2007 | 2012 | Activities relating to drinking water and wastewater services - Guidelines for the management of wastewater utilities and for the assessment of wastewater services Provides guidelines for the management of wastewater utilities and for the assessment of wastewater services ICS 13.060.30 |
59 | TSHS 65,000/= USD 65 |
TZS 1521:2014 (1st Ed) EAS 783:2013 | 2014 | Stainless steel tanks ― Specification Specifies material, dimensional, and constructional requirements for stainless steel tanks. ICS: 77.140 |
5 | TSHS 10,000/= USD 10 |
TZS 1520: 2012 (1st Ed) | 2012 | Non- malted cereal beer- Specification Specifies requirements and methods of sampling and test for beer obtained from non-malted cereals. ICS 67.160.10 |
15 | TSHS 20,000/= USD 20 |
TZS 1519: 2012(1st Ed) EAS 501:2008 | 2012 | Conductors of insulated cables Specifies the nominal cross- sectional areas, in the range 0.5 mm2 to 2 500mm2 for conductors in electric power cables and cords of a wide range of types. Requirements for numbers and sizes ICS.29.060.20 |
37 | TSHS 45,000/= USD 45 |
TZS 1518 (Part 8):2016 | 2016 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/ 750 VPart 1: General requirements Specifies requirements and test methods for the constructions and performance of polyvinyl chloride (PVC) insulation of rated voltage 300/500 V intended for internal wiring, electric power a ICS: 29.060.20 |
15 | TSHS 20,000/= USD 20 |
TZS 1518 (Part 7): 2012 EAS 499-7:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 7: Flexible cables screened and unscreened with two or more conductors. Details the particular specifications for polyvinyl chloride insulated screened and unscreened control cables of rated voltages up to and including 300/500 V. ICS 29.060.20 |
23 | TSHS 30,000/= USD 30 |
TZS 1518 (Part 6): 2012 EAS 499-6:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 6: Lift cables and cables for flexible connections Details the particular specification for both circular and flat lift cables and cables for flexible connections of rated voltages up to and including 450/750 V. ICS 29.060.20 |
39 | TSHS 45,000/= USD 45 |
TZS 1518 (Part 5): 2012(1st Ed) EAS 499-5:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (Cords) Specifies particular specifications for polyvinyl chloride insulated flexible cables (cords) of rated voltages up to and include 300/500 V. ICS 29.060.20 |
43 | TSHS 50,000/= USD 50 |
TZS 1518 (Part 4): 2012 (1st Ed) EAS 499-4:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 4: Sheathed cables for fixed wiring Specifies the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V ICS 29.060.20 |
15 | TSHS 20,000/= USD 20 |
TZS 1518 (Part 3): 2012 EAS 499-3:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 3: None sheathed cables for fixed wiring Specification for polyvinyl chloride insulated single-core non- sheathed cables for fixed wiring of rated voltages up to and including 450/750 V. ICS 29.060.20 |
33 | TSHS 40,000/= USD 40 |
TZS 1518 (Part 1): 2012 EAS 499-1:2008 | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/ 750 VPart 1: General requirements Applies to rigid and flexible cables with insulation and sheath if any, based on polyvinyl chloride of rated voltages U/U up to and including 450/750 V used in power installations of nominal ICS 29.060.20 |
11 | TSHS 20,000/= USD 20 |
TZS 1517: 2012 (1st Ed) ISO/IEC 27002: 2005 | 2012 | Information technology – Security techniques – Code of practice for information security management Establishes guidelines and general principles for initiating, implementing, maintaining and improving information security management in an organization. ICS 35.040 |
115 | TSHS 120,000/= USD 120 |
TZS 1516: 2012(1st Ed) ISO 25841:2011 | 2012 | Textiles – Female condoms – Requirements and test methods Specifies the minimum requirements and test methods for female condoms, which are supplied to consumers for contraceptive purposes assisting in the prevention of sexually transmitted infecti ICS. 11.200 |
40 | TSHS 45,000/= USD 45 |
TZS 1515: 2012 (1st Ed) | 2012 | Food products – Determination of melamine in liquid and powder milk by ELISA (Routine method) Prescribes procedures for the extraction and determination of melamine in liquid (fresh milk, UHT milk and condensed milk); and powder milk by ELISA Methods. ICS 67.050 |
10 | TSHS 15,000/= USD 15 |
TZS 1514: 2012 (1st Ed) | 2012 | Food products – Determination of melamine in liquid and powder milk by HPLC-UV Method Prescribes procedures for the extraction and determination of Melamine in liquid (fresh milk, UHT milk and condensed milk) and powder milk by HPLC-UV Method. ICS 67.050 |
8 | TSHS 15,000/= USD 15 |
TZS 1513: 2012 (1st Ed) | 2012 | Marble tiles and slabs – Specification Specifies the materials characteristics, physical requirement, sizes and finish of marble tiles and slabs. ICS 91.100.99 |
8 | TSHS 15,000/= USD 15 |
TZS 1512: 2019 (2nd Ed) EAS 179: 2003 | 2019 | Precast concrete paving blocks – Specifications Specifies requirements for pre-cast concrete paving blocks intended for the construction of low speed roads, industrial and other paved surfaces subjected to all categories of static and veh ICS.91.100 |
10 | TSHS 15,000/= USD 15 |
TZS 1511: 2012 (1st Ed) | 2012 | Occupational health and safety management system requirement Specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state ICS:31.100 |
14 | Tshs. 20,000/= USD 20 |
TZS 1510: 2014 (2nd Ed) EAS 799:2013 | 2014 | Edible full fat soya flour- Specification Prescribes requirements and methods of sampling and test for edible full fat soya flour for human consumption. ICS 67.060 |
7 | Tshs. 15,000/= USD 15 |
TZS 1509: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of thiamine content by fluorometric method Prescribes method for the determination of thiamine content in milk based infant formula. The method is also applicable to all food products. ICS 67.020 |
7 | Tshs. 15,000/= USD 15 |
TZS 1508: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of Vitamin E content by liquid chromatographic method Prescribes method for the determination of Vitamin E content in milk based infant formula. ICS. 67.020 |
6 | Tshs. 15,000/= USD 15 |
TZS 1507: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of vitamin D3 content by liquid chromatographic method Prescribes method for the determination of Vitamin D3 content in milk based infant formula. The method used is applicable in ready-to-feed milk-based infant formulas containing 488– 533 IU/L ICS 67.020 |
7 | Tshs. 15,000/= USD 15 |
TZS 1505: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of iodide content by ion-selective electrode method Prescribes method for the determination of iodide in milk based infant formula.The method used is applicable in ready to feed milk based infant formula containing 75 – 150 µg/L iodide. ICS 67.020 |
6 | Tshs. 15,000/= USD 15 |
TZS 1504: 2016 (1st Ed) ISO 2448:1998 | 2016 | Fruits and vegetable products – Determination of ethanol content Specifies a method for the chemical determination of ethanol in fruit and vegetable products. The method is not applicable to products containing more than 5 % (m/m) of ethanol. In the case ICS 67.080.01 |
10 | Tshs. 15,000/= USD 15 |
TZS 1503: 2016 (1st Ed) ISO 763:2003 | 2016 | Fruits and vegetable products – Determination of ash insoluble in hydrochloric acid Specifies a method for the determination of the hydrochloric-acid-insoluble ash yielded by fruit and vegetable products.The method serves for the determination of siliceous impurities, toget ICS 67.080.01 |
8 | Tshs. 15,000/= USD 15 |
TZS 1502: 2016 (1st Ed) ISO 6634:1982 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test Part 14: Determination of arsenic content - Silver diethyldithocarbamate spectrophotometric method Specifies a method for the determi- nation of the arsenic content of fruits, vegetables and derived products. ICS 67.080.01 |
9 | Tshs. 15,000/= USD 15 |
TZS 1501: 2016 (1st Ed) ISO 6637:1984 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 16: Determination of mercury content – Flameless atomic absorption method Specifies a method for the determi- nation of the mercury content of fruits, vegetables and derived products. ICS 67.080.01 |
9 | Tshs. 15,000/= USD 15 |
TZS 1500-: 2016 (2nd Ed) ISO 6636/2:1981 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 15: Determination of zinc content - Atonic absorption spectrometric method Specifies an atomic absorption spec- trometric method for the determination of the zinc content of fruits, vegetables and derived products. ICS 67.080.01 |
4 | TZS 10,000/-USD 10 |
TZS 899: 2018 (2nd Ed) | 2018 | Textiles – Towels – Specification Specifies the constructional details and other requirements of woven terry fabrics to be used in the manufacture of beach, bath, kitchen and facecloth towels. ICS: 59.080.30 |
7 | Tshs. 15,000/= USD 15 |
TZS 898: 2006 (1st Ed) | 2006 | Textiles – Specifications for school wear for boys and girls – Requirements for making school wear Specifies requirements for the manufacture, size, labeling and dry cleaning of all types of outwear garments intended for school wear. ICS: 61.020 |
4 | TZS 10,000/-USD 10 |
TZS 897: 2006 (1st Ed) | 2006 | Textiles – Specification for woven fabrics used for suits, jackets, slacks, trousers and skirts Specifies requirements for woven fabrics used in making suits, jackets, slacks, trousers and skirts made from one textile fibre or mixture of textile fibres. ICS. 59.080.30 |
5 | TZS 10,000/-USD 10 |
TZS 896: 2006 (1st Ed) | 2006 | Textiles – Specification for handmade batiks Prescribes the minimum requirements and test methods for handmade batiks. ICS: 61.020 |
7 | TZS 15,000/-USD 15 |