Dimensional / Length
Dimensional Metrology Laboratory is a laboratory that provides traceability and calibration of length and angular measuring equipment, instrument and tools. The calibration services of the Dimensional Metrology Laboratory are designed to help the makers and users of precision instruments achieve the highest possible levels of measurement quality and productivity. The Laboratory is equipped with Equipment, Standard and Personnel qualified to carry out its services.
The laboratory is accredited by SADCAS and has the following capabilities;
| Instrument | Range | CMC |
| Measuring Tape | (0-12)m | ±0,4 mm |
| Dip tape | (0-12)m | ±0,4 mm |
| Measuring/Dip Tape | (0-30)m | ±0,4 mm |
| Above 30m | ±0,4 mm | |
| Ruler | (0-1000)mm | ±0,2mm |
| Hand Instruments | ||
| Height gauge | (0-200)mm | ±11 µm |
| (200-500)mm | ±25 µm | |
| Depth /thickness gauge | (0-25) mm | ±6 µm |
| External Micrometre | (0-300) mm | ±6,0 µm |
| Vernier/Digital Calliper | (0-200) mm | ±11 µm |
| (0-500) mm | ±25 µm | |
| Dial Indicators/gauges | (0-20)mm | ±6µm |
| (20-50)mm | ±9µm | |
| Feeler Gauge | (0-1)mm | ±2µm |
| End Standard | ||
| Set of Gauge Blocks | (0-200) mm | ±0,2 µm |
| Setting piece | (0-200) mm | ±2 µm |
| Penetrometer | (0-50)mm | ±0,1mm |
| GO-NO-GO gauge | (0-50)mm | ±9 µm |
| Sieves | Above 2.5mm | ±11 µm |
| Protactor | (0 - 180) degrees | 1 degree |
| Mason Square | 90 degrees | 1 degree |
| Inclinometer | (0 - 90) degrees | 1 degree |
