Standard Catalogues
| TZS. NO | Year | Title and Scope | Pages | Price |
|---|---|---|---|---|
| TZS 3118: 2022 | 2022 | Stretch cling film — Specification Specifies requirements, methods of sampling and test for stretch cling film used for wrapping food to keep it fresh, boxes, luggage and palletized products, such as tea, chemicals, machinery 83.140.10 |
13 | TSHS 20,000/= USD 20 |
| TZS 2870: 2022 (1st Ed) | 2022 | Textiles — Reusable fabric face masks — Specification Specifies performance requirements, sampling and test methods for reusable fabric face masks for general public use. 11.040.30 |
7 | TSHS 15,000/= USD 15 |
| TZS 2891: 2022 (1st Ed) | 2022 | Stainless steel cookware — Specification This Tanzania Standard lays down the requirements for the following types of stainless steel utensils: a) Cooking utensils, b) Serving utensils, c) Table utensils, and d) Storage utensi 77.140.20 |
32 | TSHS 40,000/= USD 40 |
| TZS 2786: 2022 (1st Ed) | 2022 | Ginger paste ― Specification Specifies the requirements, sampling and test methods for ginger paste prepared from ginger (Zingiber officinale) intended for human consumption. 67.220.10 |
6 | TSHS 15,000/= USD 15 |
| TZS 2771:2022(1st Ed) | 2022 | Samosa (manda) and spring roll sheets — Specification Prescribes the requirements, sampling and test methods for samosa (manda) and spring roll sheets. 67.060 |
4 | TSHS 10,000/= USD 10 |
| TZS 2656:2022(1st Ed) | 2022 | Kraft paper — Specification Specifies the requirements, sampling, and test methods of Kraft paper for manufacture of wrapping and general packaging purpose. 85.060 |
6 | TSHS 15,000/= USD 15 |
| TZS 2399:2020(1st Ed) | 2020 | Copper rods and bars of electrical purposes — Specification Covers the requirements for copper rods and bars for electrical purposes. 77.150.30 |
15 | TSHS 20,000/= USD 20 |
| TZS 2524:2021(1st Ed) | 2021 | Diary book — Specification Specifies the requirements, sampling and test methods for diary books. 85.080.10 |
7 | TSHS 15,000/= USD 15 |
| TZS 2919:2022/EAS 1003:2021 (1st Ed) | 2022 | Cashew butter― Specification Specifies requirements, sampling and test methods for cashew butter derived from kernels of cashew tree (Anacardium occidentale, L) intended for human consumption. 67.100.29 EAS 1003:2021 |
5 | TSHS 10,000/= USD 10 |
| TZS 146: 2009 (2nd Ed) | 2009 | Steel tubes for furniture purposes – Specification Covers the requirements for plain carbon round steel tubes for furniture purposes. 77.140.75 |
4 | TSHS 10,000/= USD 10 |
| TZS 2356:2020/ISO 10282:2014 (1st Ed) | 2020 | Single use sterile surgical rubber gloves ― Specification Specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. 11.140 10282:2014 |
11 | TSHS 20,000/= USD 20 |
| TZS 2781:2021 (1st Ed) | 2021 | Baobab fruit powder ― Specification Prescribes the requirements and methods of sampling and test for baobab fruit powder intended for human consumption and industrial use. 67.080.10 |
7 | TSHS 15,000/= USD 15 |
| TZS 2663: 2022 (1st Ed) | 2022 | Garbage bags — Specification Specifies the general characteristics, requirements and test methods for garbage bags made from thermoplastic materials containing a minimum of 10 % of postconsumer recyclate that ensures fi 55.120 |
12 | TSHS 20,000/= USD 20 |
| TZS 2347: 2019- ISO 16924: 2016 (1st Ed) | 2019 | Natural gas fuelling stations — LNG stations for fuelling vehicles Specifies the design, construction, operation, maintenance and inspection of stations for fuelling liquefied natural gas (LNG) to vehicles, including equipment, safety and control devices. 75.200 16924: 2016 |
77 | TSHS 85,000/= USD 85 |
| TZS 3160:2021 (1st Ed) | 2021 | Maandazi — Specification Specifies requirements, sampling and test methods for maandazi, intended for human consumption. This Tanzania Standard applies to doughnuts, East African doughnuts, Swahili buns and mahamri. 67.060 |
5 | TSHS 10,000/= USD 10 |
| TZS 2593:2022 | 2022 | Household laundry detergent bars ― Specification Specifies requirements, sampling and test methods for household laundry detergent bars. 67.120.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 3016:2021 | 2021 | Common salt and cattle licks — Specification Specifies the requirements, sampling and test methods for common salt and cattle licks for animal consumption. 65.120 |
5 | TSHS 10,000/= USD 10 |
| TZS 2794:2021 | 2021 | Methylated spirit 70% for medical use — Specification Specifies requirements, methods of sampling and test for methylated spirit 70% to be used as medical disinfectant, cosmetics and solvent. It does not apply to material for industrial and foo 71.060 |
3 | TSHS 10,000/= USD 10 |
| TZS 142-4:2021 | 2021 | Steel for the reinforcement of concrete — Part 4: Ribbed bars — Low grade steel (300 MPa – 450 MPa) Specifies technical requirements for low grade steel ribbed bars to be used as reinforcement in concrete. It is applicable to steel delivered in the form of bars, coils and de-coiled product 91.080.40 |
26 | TSHS 35,000/= USD 35 |
| TZS 3139:2021 | 2021 | Transparent toilet soap — Specification Specifies requirements and test methods for transparent toilet soap suitable for body hygiene. 71.100.40 |
3 | TSHS 10,000/= USD 10 |
| TZS 2605:2021/ ISO 11277:2009 | 2021 | Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation Specifies a basic method of determining the particle size distribution applicable to a wide range of mineral soil materials, including the mineral fraction of organic soils. ICS : 13.080.20 ISO 11277:2009 |
34 | Tshs. 40,000/= USD 40 |
| TZS 2855:2021/ ISO 9202:2019 | 2021 | Jewellery and precious metals — Fineness of precious metal alloys Specifies a range of fineness of precious metal alloys (excluding solders) recommended for use in the field of jewellery. ICS: 39.060 ISO 9202:2020 |
2 | Tshs. 10,000/= USD 10 |
| TZS 2863:2021/ ISO 15239:2005 | 2021 | Solid mineral fuels — Evaluation of the measurement performance of on-line analysers Sets out practices for the evaluation of the measurement performance of all types of on-line analysers for solid mineral fuel. ICS :75.160.10 ISO 15239:2005 |
61 | Tshs. 70,000/= USD 70 |
| TZS 2605:2021/ ISO 11277:2009 | 2021 | Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation Specifies a basic method of determining the particle size distribution applicable to a wide range of mineral soil materials, including the mineral fraction of organic soils. ICS : 13.080.20 ISO 11277:2009 |
34 | Tshs. 40,000/= USD 40 |
| TZS 2957:2021/ ISO 3632-2:2011 | 2021 | Spices -- Saffron (Crocus sativus L.) -- Part 2: Test methods Specifies test methods for dried saffron obtained from the Crocus sativus L. flower. ICS:67.220.10 ISO 3632-2:2011 |
40 | TSHS 45,000/= USD 45 |
| TZS 2959:2021/ ISO 11056:1999 | 2021 | Sensory analysis — Methodology — Magnitude estimation method Specifies a method for applying magnitude estimation to the evaluation of sensory attributes. ICS : 67.240 ISO 11056:1999 |
20 | Tshs. 25,000/= USD 25 |
| TZS 2917-4:2021/ IEC 61853-4:2018 | 2021 | Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles Describes the standard reference climatic profiles used for calculating energy ratings. This standard contains an attachment in the form of zip files (climatic data sets), which are intended 27.160 |
8 | |
| TZS 2917-3:2021/ IEC 61853-3:2018 | 2021 | Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules Describes the calculation of PV module energy rating values. The purpose of this document is to define a methodology to determine the PV module energy output (watt-hours), and the climatic s 27.160 |
13 | |
| TZS 2917-1:2021/ IEC 61853-1:2011 | 2021 | Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating Describes requirements for evaluating PV module performance in terms of power (watts) rating over a range of irradiances and temperatures. The object is to define a testing and rating system 27.160 |
17 | |
| TZS 2728:2021/ IEC 62548:2016 | 2021 | Photovoltaic (PV) arrays - Design requirements Sets out design requirements for photovoltaic (PV) arrays including DC array wiring, electrical protection devices, switching and earthing provisions. The scope includes all parts of the PV 27.160 |
72 | |
| TZS 2726:2021/ IEC 62738:2018 | 2021 | Ground-mounted photovoltaic power plants - Design guidelines and recommendations Sets out general guidelines and recommendations for the design and installation of ground-mounted photovoltaic (PV) power plants. A PV power plant is defined within this document as a grid-c 27.160 |
24 | |
| TZS 2725-1-24:2021/ IEC 60794-1-24:2014 | 2021 | Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods Applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical co 33.180.10 |
12 | |
| TZS 2725-1-23:2021/ IEC 60794-1-23:2019 | 2021 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods Is available as IEC 60794-1-23:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 33.180.10 |
35 | |
| TZS 2725-1-2:2021/ IEC 60794-1-2:2017 | 2021 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance Applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical c 33.180.10 |
10 | |
| TZS 2406-2:2021/ IEC 61724-2:2016 | 2021 | Photovoltaic system performance - Part 2: Capacity evaluation method Defines a procedure for measuring and analyzing the power production of a specific photovoltaic system with the goal of evaluating the quality of the PV system performance. The test is inten 27.160 |
14 | |
| TZS 877-1-4:2021/ IEC 61215-1-4:2016 | 2021 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules Lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 607 27.160 |
9 | |
| TZS 877-1-3:2021/ IEC 61215-1-3:2016 | 2021 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules Lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 607 27.160 |
9 | |
| TZS 877-1-2:2021/ IEC 61215-1-2:2016 | 2021 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modul Lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 607 27.160 |
9 | |
| TZS 877-1-1:2021/ IEC 61215-1-2:2016 | 2021 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules TC 82 Additional i Lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 607 27.160 |
8 | |
| TZS 2912-1:2021/ISO 19867-1:2018 | 2021 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability Applicable to cookstoves used primarily for cooking or water heating in domestic, small-scale enterprise, and institutional applications, typically with firepower less than 20 kW and cooking 97.040.20 ISO 19867-1:2018 |
108 | TSHS 115,000/= USD 115 |
| TZS 2912:2021/ISO 19869:2019 | 2021 | Clean cookstoves and clean cooking solutions — Field testing methods for cookstoves Provides field testing methods to evaluate cooking system performance in real-world conditions. 97.040.20 ISO 19869:2019 |
108 | TSHS 115,000/= USD 115 |
| TZS 14:2021/ISO 671:1982 | 2021 | Steel and cast iron - Determination of sulphur content - Combustion titrimetric method Specifies a titrimetric method for the determination of sulphur in steel and cast iron, after combustion of the test portion in a current of oxygen. 77.080.01 ISO 671:1982 |
5 | TSHS 10,000/= USD 10 |
| TZS 2887:2021/ISO 6947:2020 | 2021 | Welding and allied processes — Welding positions Defines welding positions for testing and production, for butt and fillet welds, in all product forms. 25.160.40 ISO 6947:2020 |
19 | TSHS 25,000/= USD 25 |
| TZS 2888:2021/ISO 6847:2020 | 2021 | Welding consumables — Deposition of a weld metal pad for chemical analysis Specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. 25.160.20 ISO 6847:2020 |
4 | TSHS 10,000/= USD 10 |
| TZS 2688-13:2021/ ISO 1920-13:2018 | 2021 | Testing of concrete — Part 13: Properties of fresh self compacting concrete Specifies procedures for testing fresh self-compacting concrete. It specifies the following test methods: determination of consistence (slump flow test), V funnel test, L box test, sieve seg ICS : 91.100.30 ISO 1920-13:2018 |
23 | Tshs. 30,000/= USD 30 |
| TZS 2688-12:2021/ ISO 1920-12:2015 | 2021 | Testing of concrete — Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method Specified in ISO 1920-12:2015 is a method for evaluating the carbonation resistance of concrete using an accelerated carbonation test. ICS : 91.100.30 ISO 1920-12:2015 |
12 | Tshs. 20,000/= USD 20 |
| TZS 2880:2021/ISO 20456:2017 | 2021 | Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids Applies to industrial electromagnetic flowmeters used for the measurement of flowrate of a conductive liquid in a closed conduit running full. 17.120.10 |
30 | TSHS 35,000/= USD 35 |
| TZS 2688-11:2021/ ISO 1920-11:2013 | 2021 | Testing of concrete — Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion Specifies a method for determining the unidirectional non-steady-state chloride penetration parameters of conditioned specimens of hardened concrete. ICS : 91.100.30 ISO 1920-11:2013 |
20 | Tshs. 25,000/= USD 25 |
| TZS 2688-10:2021/ ISO 1920-10:2010 | 2021 | Testing of concrete — Part 10: Determination of static modulus of elasticity in compression Specifies a test method for the determination of the static modulus of elasticity in compression of hardened concrete, on test specimens which are cast or taken from a structure. ICS : 91.100.30 ISO 1920-10:2010 |
7 | TSHS 15,000/= USD 15 |
| TZS 2943:2021/ ISO 2074:2007 | 2021 | Plywood — Vocabulary Establishes terminology relating specifically to plywood. ICS : 01.040.79 ISO 2074:2007 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2770:2021/ ISO/TR 17870-2:2015 | 2021 | Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels Defines the quality of thin ceramic tiling and provides guidance for materials selection, installation, and use, to ensure that required levels of quality and performance are achieved. ICS : 91.100.23 ISO/TR 17870-2:2015 |
24 | Tshs. 30,000/= USD 30 |
| TZS 2823-5:2021/ISO 4210-5:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 5: Steering test methods Specifies the steering test methods for ISO 4210‑2. 43.150 ISO 4210-5:2014 |
13 | TSHS 20,000/= USD 20 |
| TZS 720:2021(2nd Ed)/ISO/IEC 17020:2012 | 2021 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection Specifies requirements for the competence of bodies performing inspection and for the impartiality and consistency of their inspection activities. 03.120.20 ISO/IEC 17020:2012 |
18 | Tshs. 25,000/= USD 25 |
| TZS 2769:2021/ ISO 26987:2008 | 2021 | Resilient floor coverings — Determination of staining and resistance to chemicals Specifies a procedure for the determination of the reaction of resilient floor covering to chemical substances. ICS : 97.150 ISO 26987:2008 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2823-4:2021/ISO 4210-4:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 4: Braking test methods Specifies the braking test methods for ISO 4210‑2. 43.150 ISO 4210-4:2014 |
29 | TSHS 35,000/= USD 35 |
| TZS 2815:2021(2nd Ed)ISO/IEC 17011:2017 | 2021 | Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies Specifies requirements for the competence, consistent operation and impartiality of accreditation bodies assessing and accrediting conformity assessment bodies. 03.120.20 ISO/IEC 17011:2017 |
29 | Tshs. 35,000/= USD 35 |
| TZS 2698-4:2021/ ISO 16311-4:2014 | 2021 | Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention Gives requirements for substrate condition before and during application, including structural stability, storage of materials, the preparation, and application of products and systems for t ICS : 91.100.30 ISO 16311-4:2014 |
49 | TSHS 55,000/= USD 55 |
| TZS 2698-3:2021/ ISO 16311-3:2014 | 2021 | Maintenance and repair of concrete structures — Part 3: Design of repairs and prevention Defines basic considerations and decision-making for the specification of repair and prevention remedies, and management strategies for reinforced and unreinforced concrete structures using ICS : 91.100.30 ISO 16311-3:2014 |
22 | Tshs. 30,000/= USD 30 |
| TZS 2823-3:2021/ISO 4210-3:2014 | 2021 | ISO 4210-3:2014 Cycles — Safety requirements for bicycles — Part 3: Common test methods Specifies the common test methods for ISO 4210‑2. 43.150 ISO 4210-3:2014 |
9 | TSHS 15,000/= USD 15 |
| TZS 2823-1:2021/ISO 4210-1:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 1: Terms and definitions Specifies terms and definitions related to safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies having saddle height as given in Table 1. 43.150 ISO 4210-1:2014 |
6 | TSHS 15,000/= USD 15 |
| TZS 2804:2021/ ISO 13291:2006 | 2021 | Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method Specifies a reduced molybdophosphate photometric method for the determination of the total phosphorus content of hard coal, lignites and coke. Two methods for taking the phosphorus into solu ICS : 75.160.10 ISO 13291:2006 |
6 | TSHS 15,000/=USD 15 |
| TZS 1457:2021(3rd Ed)/ISO 10006:2017 | 2021 | Quality management — Guidelines for quality management in projects Gives guidelines for the application of quality management in projects. 03.100.70 ISO 10006:2017 |
34 | Tshs. 40,000/= USD 40 |
| TZS 2808-3:2021/ISO 3545-3:1989 | 2021 | Steel tubes and fittings - Symbols for use in specifications - Part 3: Tubular fittings with circular cross-section Defines the most common Symbols with the aim of standardizing and facilitating the use of terminology in Standards for tubular fittings and associated products. 23.040.40 ISO 3545-3:1989 |
4 | TSHS 10,000/= USD 10 |
| TZS 2766:2021/ ISO 622:2016 | 2021 | Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method Specifies a reduced molybdophosphate photometric method for the determination of the total phosphorus content of hard coal, lignites and coke. Two methods for taking the phosphorus into solu ICS : 75.160.10 ISO 622:2016 |
6 | TSHS 15,000/=USD 15 |
| TZS 2698-2:2021/ ISO 16311-2:2014 | 2021 | Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures Describes general requirements and procedures for the assessment of concrete structures. ICS : 91.100.30 ISO 16311-2:2014 |
44 | TSHS 50,000/ USD 50 |
| TZS 2765: 2021/ ISO 23499:2013 | 2021 | Coal — Determination of bulk density for the use in charging of coke ovens Provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. It focuses on the uncompacte ICS : 73.040 ISO 23499:2013 |
6 | TSHS 15,000/=USD 15 |
| TZS 2814:2021/ISO 10019:2005 | 2021 | Guidelines for the selection of quality management system consultants and use of their services Provides guidance for the selection of quality management system consultants and the use of their services. 03.100.30 ISO 10019:2005 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2764:2021/ ISO 10753:2019 | 2021 | Coal preparation plant — Assessment of the liability to breakdown in water of materials associated with coal seams Specifies a method for assessing the liability of materials associated with coal seams to breakdown on agitation with water. ICS : 73.120 ISO 10753:2019 |
13 | TSHS 20,000/=USD 20 |
| TZS 2698-1:2021/ ISO 16311-1:2014 | 2021 | Maintenance and repair of concrete structures — Part 1: General principles Presents the framework and general principles for maintenance and repair of all kinds of existing concrete structures ? un-reinforced and reinforced concrete, prestressed concrete and steel- ICS : 91.100.30 ISO 16311-1:2014 |
19 | Tshs. 25,000/= USD 25 |
| TZS 2763:2021/ ISO 13292:2006 | 2021 | Copper, lead, zinc and nickel concentrates — Experimental methods for checking the bias of sampling Specifies methods for checking whether there is any bias in the sampling of copper, lead, zinc and nickel concentrates, where the sampling is carried out in accordance with the methods speci ICS : 73.060.99 ISO 13292:2006 |
11 | TSHS 20,000/=USD 20 |
| TZS 2761:2021/ ISO 12745:2008 | 2021 | Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques Provides guidelines to test for bias over a wide range of mass measurement techniques, to estimate the precision for each technique and to calculate the precision for wet mass when estimated ICS : 73.060.99 ISO 12745:2008 |
47 | TSHS 55,000/=USD 55 |
| TZS 2808-2:2021/ISO 3545-2:1989 | 2021 | Steel tubes and fittings - Symbols for use in specifications - Part 2: Square and rectangular hollow sections Defines the most common Symbols with the aim of standardizing and facilitating the use of terminology in Standards for steel hollow sections and associated products. 23.040.10 ISO 3545-2:1989 |
2 | TSHS 10,000/= USD 10 |
| TZS 2694:2021/ ISO/TR 17870-1:2015 | 2021 | Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles Defines the quality of ceramic tiling and provides guidance for materials selection, installation and use, to achieve required levels of quality and performance. ICS : 91.100.23 ISO/TR 17870-1:2015 |
20 | Tshs. 25,000/= USD 25 |
| TZS 2762:2021/ ISO 12744:2006 | 2021 | Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling Specifies methods for checking the precision of primary sampling, sample processing, chemical analysis, physical testing and determination of moisture content of copper, lead, zinc and nicke ICS : 73.060.99 ISO 12744:2006 |
15 | TSHS 20,000/=USD 20 |
| TZS 2662:2021/ISO 20611:2018 | 2021 | Adventure tourism — Good practices for sustainability — Requirements and recommendations Provides requirements and recommendations for adventure tourism activity providers on good practices for sustainability (environmental, social and economic aspects) for adventure tourism act 03.200.10 /ISO 20611:2018 |
10 | TSHS 15,000/= USD 15 |
| TZS 2719:2021/ ISO 12739:2006 | 2021 | Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method Specifies an ion-exchange/EDTA titrimetric method for the determination of the mass fraction of zinc in zinc concentrates. The method is applicable to zinc sulfide concentrates having a mass ICS : 73.060.99 ISO 12739:2006 |
23 | TSHS 30,000/=USD 30 |
| TZS 2660:2021/ISO 13009:2015 | 2021 | Tourism and related services — Requirements and recommendations for beach operation Establishes general requirements and recommendations for beach operators that offer tourist and visitor services. It provides guidance for both beach operators and users regarding the delive 03.080.30 ISO 13009:2015 |
35 | Tshs. 40,000/= USD 40 |
| TZS 2718:2021/ ISO 10251:2006 | 2021 | Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying Specifies methods for the determination of moisture content of a lot of copper, lead, zinc or nickel concentrate, defined as the percentage mass loss of the moisture test portion under the c ICS : 73.060.99 ISO 10251:2006 |
13 | TSHS 20,000/=USD 20 |
| TZS 2690:2021/ ISO 19338:2014 | 2021 | Performance and assessment requirements for design standards on structural concrete Provides performance and assessment requirements for design standards of structural concrete. ICS : 91.080.40 ISO 19338:2014 |
10 | TSHS 15,000/= USD 15 |
| TZS 2661:2021/ISO 21401:2018 | 2021 | Tourism and related services — Sustainability management system for accommodation establishments — Requirements Specifies environmental, social and economic requirements to implement a sustainability management system in accommodation establishments in the tourism sector. 03.100.70 ISO 21401:2018 |
29 | TSHS 35,000/= USD 35 |
| TZS 2689-2:2021/ ISO 17785-2:2016 | 2021 | Testing methods for pervious concrete — Part 2: Density and void content Specifies a procedure for testing the density and void content of freshly mixed and hardened pervious concrete specimens for pavement in the laboratory or cored from field placements. ICS : 91.100.30 ISO 17785-2:2016 |
7 | TSHS 15,000/= USD 15 |
| TZS 2717:2021/ ISO 13543:2016 | 2021 | Copper, lead, zinc and nickel sulfide concentrates — Determination of mass of contained metal in a lot Specifies the method for determining the mass of contained metal in a lot, based on the wet mass, moisture content and dry basis metal content of the lot. The procedure for estimating the va ICS : 73.060.99 1/ ISO 13543:2016 |
8 | TSHS 15,000/=USD 15 |
| TZS 2689-1:2021/ ISO 17785-1:2016 | 2021 | Testing methods for pervious concrete — Part 1: Infiltration rate Specifies the procedure for testing the infiltration rate of hardened pervious concrete pavement specimens in the laboratory. ICS : 91.100.30 ISO 17785-1:2016 |
6 | TSHS 15,000/= USD 15 |
| TZS 2659:2021/ISO 14785:2014 | 2021 | Tourist information offices — Tourist information and reception services — Requirements Establishes minimum quality requirements for services provided by tourist information offices (TIO) of any type and size, whether publicly or privately operated, in order to satisfy visitors 03.080.30 ISO 14785:2014 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2688-9:2021/ ISO 1920-9:2009 | 2021 | Testing of concrete — Part 9: Determination of creep of concrete cylinders in compression Specifies a method for determining the creep of standard concrete test cylinders subjected to a sustained longitudinal compressive load. ICS : 91.100.30 ISO 1920-9:2009 |
7 | TSHS 15,000/= USD 15 |
| TZS 2716:2021/ ISO 10469:2006 | 2021 | Copper sulfide concentrates — Determination of copper — Electrogravimetric method Specifies an electrogravimetric method for the determination of the mass fraction of copper in copper sulfide concentrates in the range 15 % to 50 %. ICS : 73.060.99 ISO 10469:2006 |
21 | TSHS 30,000/=USD 30 |
| TZS 2688-8:2021/ ISO 1920-8:2004 | 2021 | Testing of concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory Specifies a method for determining the length changes of concrete specimens due to drying in air, and the method of preparing and curing the concrete specimens to be tested. ICS : 91.100.30 ISO 1920-8:2004 |
4 | TSHS 10,000/ USD 10 |
| TZS 2914-1:2021(1st Ed)/ISO 17831-1:2015 | 2021 | Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets Defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion a 27.190 ISO 17831-1:2015 |
7 | TSHS 15,000/= USD 15 |
| TZS 2712:2021 / ISO 722:1991 | 2021 | Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round Specifies the dimensions for seven nominal sizes. This third edition cancels and replaces the second edition (1985), which has been technically revised (addition of round drill steels and ex ICS : 73.100.30 ISO 722:1991 |
3 | TSHS 10,000/=USD 10 |
| TZS 2914-2:2021(1st Ed)/ISO 17831-2:2015 | 2021 | Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes Defines a method for determining the mechanical durability of briquettes. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a con 27.190 /ISO 17831-2:2015 |
6 | TSHS 15,000/= USD 15 |
| TZS 2711: 2021 / ISO 723:1991 | 2021 | Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels Specifies the dimensions of both forged collared shanks and corresponding chuck bushings. Values are given for five nominal sizes. This second edition cancels and replaces the first edition ICS : 73.100.30 ISO 723:1991 |
3 | TSHS 10,000/=USD 10 |
| TZS 2854:2021 / ISO 11596:2008 | 2021 | Jewellery — Sampling of precious metal alloys for and in jewellery and associated products Specifies a method of sampling precious metal jewellery alloys for the determination of the precious metal content. It is applicable to raw materials, semi-finished products and finished pro ICS : 39.060 ISO 11596:2008 |
9 | TSHS 15,000/=USD 15 |
| TZS 2808-1:2021/ISO 3545-1:1989 | 2021 | Steel tubes and fittings - Symbols for use in specifications - Part 1: Tubes and tubular accessories with circular Cross-section Defines the most common Symbols with the aim of standardizing and facilitating the use of terminology in Standards for steel tubes and associated products. 23.040.10 ISO 3545-1:1989 |
3 | TSHS 10,000/= USD 10 |
| TZS 159:2021(4th Ed)/EAS 913:2019 | 2021 | Solid fertilizers — Methods of sampling specifies methods for drawing test samples from bags, as well as drawing samples of bulk material from wagon, truck loads or from flowing streams and from transfer belts ICS 65.080 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2813:2021/ISO 4996:2014 | 2021 | Hot-rolled steel sheet of high yield stress structural quality Applies to hot-rolled steel sheet of high yield stress structural quality with the use of microalloying elements. The product is intended for structural purposes where particular mechanical 77.140.50 ISO 4996:2014 |
8 | TSHS 15,000/= USD 15 |
| TZS 2688-7:2021/ ISO 1920-7:2004 | 2021 | Testing of concrete — Part 7: Non-destructive tests on hardened concrete Specifies non-destructive test methods for use on hardened concrete. ICS : 91.100.30 ISO 1920-7:2004 |
24 | Tshs. 30,000/= USD 30 |
| TZS 2860:2021/ ISO 12740: 1998 | 2021 | Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation Specifies a fire assay and flame atomic absorption spectrometric procedure for the determination of silver and gold contents of lead sulfide concentrates.The method is applicable to the dete ICS : 73.060.99 ISO 12740: 1998 |
26 | TSHS 35000/=USD 35 |
| TZS 2779:2021(3rd Ed)/ISO 21572:2019 | 2021 | Foodstuffs — Molecular biomarker analysis — Immunochemical methods for the detection and quantification of proteins Specifies performance criteria for immunochemical methods for the detection and/or quantification of a specific protein or protein(s) of interest [POI(s)] in a specified matrix. 67.050 ISO 21572:2019 |
25 | Tshs. 30,000/= USD 30 |
| TZS 2861:2021/ ISO 10258:2018 | 2021 | Copper sulfide concentrates — Determination of copper content — Titrimetric methods Specifies two titrimetric methods for the determination of the copper content of copper sulfide concentrates in the range 15 % (m/m) to 50 % (m/m), using sodium thiosulfate after separation ICS : 73.060.99 ISO 10258:2018 |
20 | TSHS 25000/=USD 25 |
| TZS 2812:2021/ISO 13976:2016 | 2021 | Hot-rolled steel sheet in coils of structural quality and heavy thickness Applies to hot-rolled carbon/manganese steel sheet in coils of structural quality without the use of microalloying elements. It is generally used in the delivered condition and is intended f 77.140.50 ISO 13976:2016 |
9 | TSHS 15,000/= USD 15 |
| TZS 2708:2021/ISO 19020:2017 | 2021 | Microbiology of the food chain — Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs Specifies a screening method for the detection of staphylococcal enterotoxins SEA, SEB, SECs, SED and SEE in foodstuffs. 07.100.30 ISO 19020:2017 |
22 | Tshs. 30,000/= USD 30 |
| TZS 2859-1:2021/ ISO 18758-1:2018 | 2021 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 1: Vocabulary Defines terms relating to rock drill rigs and rock reinforcement rigs, including their intended use, working methods, types, and main components. ICS : 53.100 ISO 18758-1:2018 |
20 | TSHS 25000/=USD 25 |
| TZS 2574:2021/ EAS 935:2019 | 2021 | Packaging — Code of practice — Glass containers Gives guidelines on the manufacture, types, selection and use of glass containers for packaging. ICS 55.100 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2707:2021/ISO/TS 17919:2013 | 2021 | Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of botulinum type A, B, E and F neurotoxin-producing clostridia Specifies a horizontal method for the molecular detection of clostridia carrying botulinum neurotoxin A, B, E, and F genes by a PCR method. 07.100.30 ISO/TS 17919:2013 |
47 | Tshs. 50,000/= USD 50 |
| TZS 2811:2021/ISO 4995:2014 | 2021 | Hot-rolled steel sheet of structural quality Applies to hot-rolled steel sheet of structural quality in the grades listed in Table 1, usually prepared without the use of microalloying elements. 77.140.50 ISO 4995:2014 |
8 | TSHS 15,000/= USD 15 |
| TZS 2668 :2021/ ISO 15249:1998 | 2021 | Zinc sulfide concentrates — Determination of gold content — Acid dissolution/solvent extraction/flame atomic absorption spectrometric method Specifies an acid decomposition, solvent extraction, flame atomic absorption spectrometric procedure for the determination of gold in zinc sulfide concentrates ICS : 73.060.99 15249:1998 |
16 | TSHS 25000/=USD 25 |
| TZS 2573:2021/ EAS 934:2019 | 2021 | Packaging — Flexible laminate tubes — Test method to assess the strength of the side seam Specifies methods for the assessment of the strength of the side seam of flexible laminate tubes. ICS 55.120 |
5 | TSHS 10,000/ USD 10 |
| TZS 2862:2021/ ISO 9599: 2015 | 2021 | Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method Specifies a gravimetric loss-in-mass method for the determination of the hygroscopic moisture content in analysis samples of copper, lead, zinc, and nickel sulfide concentrates. ICS : 73.060.99 ISO 9599: 2015 |
6 | TSHS 15,000/=USD 15 |
| TZS 2810:2021/ISO 16701:2015 | 2021 | Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying o Specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h exposure to a slightly acidified solution of 1 % NaCl tw 77.060 ISO 16701:2015 |
13 | TSHS 20,000/= USD 20 |
| TZS 2705:2021(1st Ed)/ISO 20837:2006 | 2021 | Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Requirements for sample preparation for qualitative detection Provides criteria and examples for sample preparation in order to obtain PCR-compatible samples or nucleic acids of suitable quality and quantity for PCR. 07.100.30 ISO 20837:2006 |
7 | TSHS 15,000/= USD 15 |
| TZS 2572:2021/ EAS 933:2019 | 2021 | Paper and board intended to come into contact with foodstuffs — Determination of formaldehyde in an aqueous extract Specifies the determination of formaldehyde in aqueous extracts prepared from paper and board intended to come in contact with foodstuffs. The limit of determination is 1 mg/kg. ICS 55.040 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2570:2021/ EAS 931:2019 | 2021 | Packaging ancillary materials — Code of practice — Desiccants Gives the guidelines on the selection and use of desiccants in packaging. ICS 55.040 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2704:2021(1st Ed)/ISO 221748:2005 | 2021 | Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — General requirements and definitions Gives the general requirements for the in vitro amplification of nucleic acid sequences (DNA or RNA). It is applicable to the testing of foodstuffs and isolates obtained from foodstuffs for 07.100.30 ISO 22174:2005 |
11 | Tshs. 20,000/= USD 20 |
| TZS 6863:2021/ ISO 15239:2005 | 2021 | Solid mineral fuels — Evaluation of the measurement performance of on-line analysers Sets out practices for the evaluation of the measurement performance of all types of on-line analysers for solid mineral fuel. ICS : 75.160.10 ISO 15239:2005 |
61 | TSHS 70,000/=USD 70 |
| TZS 2674-5:2021/ISO 4427-5:2019 | 2021 | Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system Specifies the characteristics of the fitness for purpose of pipes and/or fittings assemblies made from polyethylene (PE) for buried or above ground applications, intended for the conveyance 23.040.45 ISO 4427-5:2019 |
9 | TSHS 15,000/= USD 15 |
| TZS 2818:2021/ ISO 10003:2018 | 2021 | Quality management — Customer satisfaction — Guidelines for dispute resolution external to organizations Gives guidelines for an organization to plan, design, develop, operate, maintain and improve an effective and efficient dispute-resolution process for complaints that have not been resolved ICS : 03.120.10 ISO 10003:2018 |
36 | Tshs. 45,000/= USD 45 |
| TZS 2703:2021(1st Ed)/ISO 22118:2011 | 2021 | Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens — Performance characteristics Specifies minimum requirements of performance characteristics for the detection of nucleic acid sequences (DNA or RNA) by molecular methods. 07.100.30 ISO 22118:2011 |
10 | TSHS 15,000/= USD 15 |
| TZS 2864:2021/ ISO 15117-1:2004 | 2021 | Coal flow properties — Part 1: Bin flow Sets out methods for the measurement of the flow properties of coal, primarily for the design of bins and chutes. It also provides some guidance on the presentation of these data for analysi ICS : 73.040 ISO 15117-1:2004 |
24 | TSHS 30,000/=USD 30 |
| TZS 2674-1:2021/ISO 4427-1:2019 | 2021 | Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General Specifies the general aspects of polyethylene (PE) compounds for the manufacture of pressure pipes and fittings (mains and service pipes) for buried or above ground applications 23.040.45 ISO 4427-1:2019 |
17 | TSHS 25,000/= USD 25 |
| TZS 2702:2021(1st Ed)/ISO 13720:2010 | 2021 | Meat and meat products — Enumeration of presumptive Pseudomonas spp. Specifies a method for the enumeration of presumptive Pseudomonas spp. present in meat and meat products, including poultry. 07.100.30 ISO 13720:2010 |
7 | TSHS 15,000/= USD 15 |
| TZS 2817:2021/ ISO/TR 31004:2013 | 2021 | Risk management — Guidance for the implementation of ISO 31000 Provides guidance for organizations on managing risk effectively by implementing ISO 31000:2009. ICS : 03.100.01 ISO/TR 31004:2013 |
37 | Tshs. 45,000/= USD 45 |
| TZS 2865:2021/ ISO 10752:2020 | 2021 | Coal sizing equipment — Performance evaluation Describes the principles and methods for the expression of results of performance tests on sizing equipment used in coal preparation, and includes methods for the evaluation of performance p ICS : 73.120 ISO 10752:2020 |
35 | TSHS 40,000/=USD 40 |
| TZS 2673:2021/ISO 16708:2006 | 2021 | Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods Specifies the functional requirements and principles for design, operation and requalification of pipelines in the petroleum and natural gas industries using reliability-based limit state me 75.200 ISO 16708:2006 |
57 | TSHS 65,000/= USD 65 |
| TZS 2816:2021/ ISO/IEC 17065:2012 | 2021 | Conformity assessment — Requirements for bodies certifying products, processes and services Contains requirements for the competence, consistent operation and impartiality of product, process and service certification bodies ICS : 03.120.20 ISO/IEC 17065:2012 |
27 | Tshs. 35,000/= USD 35 |
| TZS 2701:2021(1st Ed)/ISO15214:1998 | 2021 | Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of mesophilic lactic acid bacteria — Colony-count technique at 30 degrees C Specifies a horizontal method for the enumeration of viable mesophilic lactic acid bacteria by counting the colonies growing in a solid medium after incubation at 30 °C for 3 days. 07.100.30 ISO 15214:1998 |
7 | TSHS 15,000/= USD 15 |
| TZS 2866:2021/ ISO 5073:2013 | 2021 | Brown coals and lignites — Determination of humic acids Specifies volumetric methods for the determination of total humic acids and free humic acid of brown coals and lignites. ICS : 73.040 ISO 5073:2013 |
7 | TSHS 15,000/=USD 15 |
| TZS 2672:2021/ISO 16440:2016 | 2021 | Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines Specifies requirements, including corrosion protection, for the design, fabrication, installation and maintenance of steel-cased pipelines for pipeline transportation systems in the petroleu 77.140 ISO 16440:2016 |
39 | TSHS 45,000/= USD 45 |
| TZS 2906:2021/ ISO 14045:2012 | 2021 | Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines Describes the principles, requirements and guidelines for eco-efficiency assessment for product systems including: the goal and scope definition of the eco-efficiency assessment; ICS : 13.020.10 ISO 14045:2012 |
38 | TSHS 45,000/=USD 45 |
| TZS 2700:2021(1st Ed)/ISO/TS 17728:2015 | 2021 | Microbiology of the food chain — Sampling techniques for microbiological analysis of food and feed samples Applies to the collection of samples before submission to the laboratory for microbiological examination. It provides general instructions and specific requirements for obtaining samples and 07.100.30 ISO/TS 17728:2015 |
17 | Tshs. 25,000/= USD 25 |
| TZS 2639:2021/ISO 8565:2011 | 2021 | Metals and alloys — Atmospheric corrosion testing — General requirements Establishes general requirements for stationary corrosion testing of metals and metallic and other inorganic coatings under atmospheric conditions carried out in the open air or under shelte 77.060 ISO 8565:2011 |
11 | TSHS 20,000/= USD 20 |
| TZS 2638:2021/ISO 8044:2015 | 2021 | Corrosion of metals and alloys — Basic terms and definitions Defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations. 77.060 ISO 8044:2015 |
23 | TSHS 30,000/= USD 30 |
| TZS 2699:2021/ISO 13307:2013 | 2021 | Microbiology of food and animal feed — Primary production stage — Sampling techniques Specifies sampling techniques within the primary food-animal production stage, for detection or enumeration of viable microorganisms with particular reference to food-borne pathogens. 07.100.30 ISO 13307:2013 |
16 | Tshs. 25,000/= USD 25 |
| TZS 2631-8:2021/ISO 17225-8:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 8: Graded thermally treated and densified biomass fuels Determines the fuel quality classes and specifications of graded densified solid biofuels produced from thermally treated biomass for non-industrial and industrial use. 27.190 |
14 | TSHS 20,000/= USD 20 |
| TZS 2631-7:2021/ISO 17225-7:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes Determines the fuel quality classes and specifications of graded non-woody briquettes. 27.190 ISO 17225-7:2014 |
7 | TSHS 15,000/= USD 15 |
| TZS 2631-6:2021/ISO 17225-6:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets Determines the fuel quality classes and specifications of graded non-woody pellets. 27.190 ISO 17225-6:2014 |
7 | TSHS 15,000/= USD 15 |
| TZS 2631-5:2021/ISO 17225-5:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood Determines the fuel quality classes and specifications of graded firewood. 27.190 ISO 17225-5:2014 |
10 | TSHS 15,000/= USD 15 |
| TZS 2631-4:2021/ISO 17225-4:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips Determines the fuel quality classes and specifications of graded wood chips 27.190 ISO 17225-4:2014 |
8 | TSHS 15,000/= USD 15 |
| TZS 2907:2021/ ISO 14046:2014 | 2021 | Environmental management — Water footprint — Principles, requirements and guidelines Specifies principles, requirements and guidelines related to water footprint assessment of products, processes and organizations based on life cycle assessment (LCA). ICS : 13.020.10 ISO 14046:2014 |
33 | TSHS 40,000/=USD 40 |
| TZS 2634:2021/ISO 22867:2011 | 2021 | Forestry and gardening machinery — Vibration test code for portable handheld machines with internal combustion engine — Vibration at the handles Specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-enginepow 13.160 ISO 22867:2011 |
28 | TSHS 35,000/= USD 35 |
| TZS 2633-1:2021/ISO 7256-1:1984 | 2021 | Sowing equipment - Test methods - Part 1 : Single seed drills (precision drills) Specifies test methods for single seed drills (precision drills). 65.060.30 ISO 7256-1:1984 |
14 | TSHS 20,000/= USD 20 |
| TZS 2905-1:2021/ ISO 5149-1:2014 | 2021 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Definitions, classification and selection criteria Specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment, and establishes procedures for the operation, maintenance, and rep ICS : 27.080 ISO 5149-1:2014 |
45 | TSHS 50,000/=USD 50 |
| TZS 2632-2:2021/ISO 5682-2:2017 | 2021 | Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers Specifies test methods to assess sprayed liquid horizontal transverse distribution. Methods are based on sprayed liquid volume measurement, nozzle flow rate measurement or nozzle tip pressur 65.060.40 ISO 5682-2:2017 |
10 | TSHS 15,000/= USD 15 |
| TZS 2632-1:2021/ISO 5682-1:2017 | 2021 | Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles Specifies test methods to assess the performance of sprayer nozzles with the exception of droplet characteristics. Applicable tests by nozzle type are described in an informative annex as a 65.060.40 ISO 5682-1:2017 |
35 | TSHS 40,000/= USD 40 |
| TZS 2722-2:2021(1st Ed)/ISO 13300-2:2006 | 2021 | Sensory analysis — General guidance for the staff of a sensory evaluation laboratory — Part 2: Recruitment and training of panel leaders Gives guidelines for the recruitment and training of panel leaders. In addition, it describes the principal activities and responsibilities of a panel leader for sensory analysis. 67.240 ISO 13300-2:2006 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2905-4:2021/ ISO 5149-4:2014 | 2021 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery Specifies requirements for safety and environmental aspects in relation to operation, maintenance and repair of refrigerating systems and the recovery, reuse and disposal of all types of ref ICS : 27.080 ISO 5149-4:2014 |
23 | TSHS 30,000/=USD 30 |
| TZS 2629-2:2021/ISO 857-2:2005 | 2021 | Welding and allied processes — Vocabulary — Part 2: Soldering and brazing processes and related terms Defines terms used for metal soldering and brazing processes, as well as related terms. 01.040.25 ISO 857-2:2005 |
28 | TSHS 35,000/= USD 35 |
| TZS 2722-1:2021(1st Ed)/ISO 13300-1:2006 | 2021 | Sensory analysis — General guidance for the staff of a sensory evaluation laboratory — Part 1: Staff responsibilities Provides guidance on staff functions in order to improve the organization of a sensory evaluation laboratory, to optimize the use of personnel, and to improve the efficiency of sensory tests 67.240 ISO 13300-1:2006 |
9 | TSHS 15,000/= USD 15 |
| TZS 2908:2021/ ISO 14033:2019 | 2021 | Environmental management — Quantitative environmental information — Guidelines and examples Gives guidelines for the systematic and methodical acquisition and review of quantitative environmental information and data about systems. It supports the application of stand ICS : 13.020.10 ISO 14033:2019 |
66 | TSHS 75,000/=USD 75 |
| TZS 2721:2021(2nd Ed)/ISO133018:2018 | 2021 | Sensory analysis — Methodology — General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure Obtaining data on the detection of stimuli that evoke responses to odour, flavor and taste by a 3-AFC (three-alternative forced-choice) procedure, and the processing of the data to estimate 67.240 ISO 13301:2018 |
28 | Tshs. 30,000/= USD 30 |
| TZS 2629-3:2021/ISO/TR 25901-3:2016 | 2021 | Welding and allied processes — Vocabulary — Part 3: Welding processes Contains terms and definitions for welding processes, classified in accordance with their physical characteristics and to the relevant energy carrier. 01.040.25 ISO/TR 25901-3:2016 |
45 | TSHS 50,000/= USD 50 |
| TZS 2909:2021/ ISO/TS 14048:2002 | 2021 | Environmental management — Life cycle assessment — Data documentation format Provides the requirements and a structure for a data documentation format, to be used for transparent and unambiguous documentation and exchange of Life Cycle As ICS : 13.020.10 ISO/TS 14048:2002 |
41 | TSHS 50,000/=USD 50 |
| TZS 2628:2021/ISO/TR 581:2005 | 2021 | Weldability — Metallic materials — General principles Gives general principles related to the weldability of metallic materials. These principles apply to all welding processes and all different types of construction whatever properties they ma 01.040.25 ISO/TR 581:2005 |
4 | TSHS 10,000/= USD 10 |
| TZS 2720:2021(2nd Ed)/ISO 8588:2017 | 2021 | Sensory analysis — Methodology — "A" - "not A" test Specifies a procedure for determining whether a perceptible sensory difference exists between samples of two products. The method applies whether a difference exists in a single sensory attr 67.240 ISO 8588:2017 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2910 :2021/ ISO 14055-1:2017 | 2021 | Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 1: Good practices framework Provides guidelines for establishing good practices in land management to prevent or minimize land degradation and desertification. It does not include management of coastal wetlands. ICS : 13.020.01 ISO 14055-1:2017 |
31 | TSHS 40,000/=USD 40 |
| TZS 2684:2021/ISO 3493:2014 | 2021 | Vanilla — Vocabulary Defines the most commonly used terms relating to vanilla. It is applicable to the following species of vanilla plants: Vanilla fragrans (Salisbury) Ames, syn. 01.040.67 ISO 3493:2014 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2627:2021/ISO 15296:2017 | 2021 | Gas welding equipment — Vocabulary Defines a vocabulary of terms and definitions specifically related to gas welding equipment. 01.040.25 ISO 15296:2017 |
13 | TSHS 20,000/= USD 20 |
| TZS 2682:2021 (1st Ed)ISO/TS 16393:2019 | 2021 | Molecular biomarker analysis — Determination of the performance characteristics of qualitative measurement methods and validation of methods Specifies methods that yield a binary result and are used for the determination in food or food products (including seeds of food crops) of the presence of molecular biomarkers. 67.050 ISO/TS 16393:2019 |
28 | TSHS 35,000/= USD 35 |
| TZS 1971-2:2021/ISO 7240-2: 2017 | 2021 | Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment Specifies requirements, test methods and performance criteria for fire detection control and indicating equipment (FDCIE) for use in fire detection and fire alarm systems installed in buildi 13.220.20 ISO 7240-2:2017 |
49 | TSHS 55,000/= USD 55 |
| TZS 2681:2021 (1st Ed)/ISO 13495:2013 | 2021 | Foodstuffs — Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid Specifies molecular tools for generating molecular profiles of varieties of plant species, enabling varietal identification, i.e. confirmation of identity in relation to one or more referenc 67.050 ISO 13495:2013 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2680:2021 (1st Ed)/ISO 16578:2013 | 2021 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences Defines terms for the detection of nucleic acid sequence of interest using DNA microarrays for detection of nucleic acid. 67.050 ISO 16578:2013 |
7 | TSHS 15,000/= USD 15 |
| TZS 1718:2021/ EAS 93-1:2020 | 2021 | Preservation of raw hides and skins — Code of practice — Part 1: Stack salting Provides guidelines for preservation of raw hides and skins by stack salting. ICS 59.140.20 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2899:2021/ISO/IEC 24769-2: 2013 | 2021 | Information technology — Realtime locating systems (RTLS) device conformance test methods — Part 2: Test methods for air interface communication at 2,4 GHz Defines the test methods for determining the conformance of 2,4 GHz real-time locating system (RTLS) tags with the specifications given in the corresponding subclauses of ISO/IEC 24730-2, bu 35.040 ISO/IEC 24769-2: 2013 |
28 | TSHS 35,000/= USD 35 |
| TZS 2679:2021/ISO 20813:2019 | 2021 | Molecular biomarker analysis — Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) — General requirements and de Specifies minimum requirements of performance characteristics for the detection of nucleic acid sequences (DNA) by molecular methods, such as the polymerase chain reaction (PCR), including d 67.050 ISO 2081:2019 |
27 | TSHS 35,000/= USD 35 |
| TZS 1719:2021/ EAS 93-2:2020 | 2021 | Preservation of raw hides and skins — Code of practice — Part 2: Air drying Provides guidelines for preservation of raw hides and skins by air drying. ICS 59.140.20 |
4 | TSHS 10,000/ USD 10 |
| TZS 1720:2021/ EAS 93-3:2020 | 2021 | Preservation of raw hides and skins — Code of practice — Part 3: Pickling Provides guidelines for preservation of raw hides and skins by pickling. ICS 59.140.20 |
4 | Tshs. 10,000/= USD 10 |
| TZS 1522:2021/ ISO 24511:2007 | 2021 | Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services Provides guidelines for the management of wastewater utilities and for the assessment of wastewater services. is applicable to publicly and privately owned and operated wastewater utilities, ICS : 93.030 ISO 24511:2007 |
59 | TSHS 65,000/=USD 65 |
| TZS 208-1: 2021/ ISO 3377-1:2011 | 2021 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear Specifies a method for determining the tear strength of leather using a single-edge tear. ICS : 59.140.30 ISO 3377-1:2011 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2678:2021/ISO 16577:2016 | 2021 | Molecular biomarker analysis — Terms and definitions Gives the definition of terms used in the International Standards published in the frame of ISO/TC 34/SC 16. 67.050 ISO 16577:2016 |
32 | Tshs. 40,000/= USD 40 |
| TZS 2733:2021/ ISO 3999:2004 | 2021 | Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests Specifies the performance, design and test requirements of apparatus for gamma radiography with portable, mobile and fixed exposure containers of the various categories defined in Clause 4. ICS : 19.100 ISO 3999:2004 |
32 | TSHS 40,000/=USD 40 |
| TZS 2900:2021/ISO/IEC 18305: 2016 | 2021 | Information technology — Real time locating systems — Test and evaluation of localization and tracking systems Identifies appropriate performance metrics and test & evaluation scenarios for localization and tracking systems, and it provides guidance on how best to present and visualize the T&E result 35.040 ISO/IEC 18305: 2016 |
76 | TSHS 85,000/= USD 85 |
| TZS 3002:2021/ EAS 228:2018 | 2021 | Cotton bed sheets — Specification Specifies the requirements, sampling and test methods for bed sheets made from cotton fabrics. ICS 59.080.30 |
6 | TSHS 15,000/= USD 15 |
| TZS 2648-2:2021(1st Ed) ISO 8128-2:1993 | 2021 | Apple juice, apple juice concentrates and drinks containing apple juice — Determination of patulin content — Part 2: Method using thin-layer chromatography Specified is extraction of patulin in a mixture of ethyl acetate and chloroform (3:2 by volume), filtration of the extract on a silica-gel column and qualitative and quantitative determinati 67.160.20 ISO 8128-2:1993 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2648-1:2021(1st Ed) ISO 8128-1:1993 | 2021 | Apple juice, apple juice concentrates and drinks containing apple juice — Determination of patulin content — Part 1: Method using high-performance liquid chromatography Specified is extraction of patulin from a test portion using ethyl acetate followed by partitioning of the extract with aqueous sodium carbonate solution, qualitative and quantitative determ 67.160.20 ISO 8128-1:1993 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3000-2:2021/ EAS 943-2:2020 | 2021 | Footwear — Specification— Part 2: Ladies open shoes Specifies the requirements, methods of sampling and test for ladies’ open shoes. ICS 61.060 |
18 | Tshs. 25,000/= USD 25 |
| TZS 2734:2021/ ISO 14152:2001 | 2021 | Neutron radiation protection shielding — Design principles and considerations for the choice of appropriate materials Presents the general methodology governing the design of neutron radiation protectionshielding and the choice of neutron radiation protection shielding materials. ICS : 13.280 ISO 14152:2001 |
75 | TSHS 80,000/=USD 80 |
| TZS 2624:2021(1st Ed)/ISO 749:1997 | 2021 | Oilseed residues — Determination of total ash Specifies a method for the determination of the total ash from residues (excluding compounded products) obtained by the extraction of oil from oilseeds by pressure or solvent. 67.200.20 ISO 749:1997 |
2 | Tshs. 10,000/= USD 10 |
| TZS 2623:2021(1st Ed)/ISO 17189:2003 | 2021 | Butter, edible oil emulsions and spreadable fats — Determination of fat content (Reference method) Specifies a method for the determination of the fat content of butter, edible oil emulsions (2.2) and spreadable fats (margarine, vegetable oil spreads, dairy spreads and blended spreads). 67.100.20 ISO 17189:2003 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2757:2021/ ISO 8672:2014 | 2021 | Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method Specifies the determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy using the membrane filter method in workplace atmospheres, as define ICS : 13.040.30 ISO 8672:2014 |
31 | TSHS 40,000/=USD 40 |
| TZS 2986:2021/ISO 1718:1991 | 2021 | Rock drilling equipment - Drill rods with tapered connection for percussive drilling Specifies the basic dimensions of drill rods with tapered connection for percussive drilling and the necessary dimensions of the tapered connections. 73.100.30 ISO 1718:1991 |
3 | TSHS 10,000/= USD 10 |
| TZS 3000-1:2021/ EAS 943-1:2020 | 2021 | Footwear — Specification — Part 1: Ladies closed shoes Specifies the requirements, methods of sampling and test for ladies’ closed shoes. ICS 61.060 |
17 | Tshs. 25,000/= USD 25 |
| TZS 2622-2:2021 (1st Ed)/ISO 15788-2:2003 | 2021 | Animal and vegetable fats and oils — Determination of stigmastadienes in vegetable oils — Part 2: Method using high-performance liquid chromatography (HPLC) Specifies a method for the determination of steradienes, especially stigmastadienes. Steradienes are formed by dehydration of sterols during bleaching and also partially during steam washing 67.200.10 ISO 15788-2:2003 |
10 | TSHS 15,000/= USD 15 |
| TZS 2756:2021/ ISO 13964:1998 | 2021 | Air quality — Determination of ozone in ambient air — Ultraviolet photometric method Specifies an ultraviolet (UV) photometric method for the determination of ozone in ambient air. It is applicable to the determination of ozone concentrations in t ICS : 13.040.20 ISO 13964:1998 |
13 | TSHS 20,000/=USD 20 |
| TZS 2987:2021/ISO 1717:1974 | 2021 | Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions Specifies the connecting dimensions for drill-rods and the shanks of drill-bits. In addition, an example is given for wet drilling. 73.100.30 ISO 1717:1974 |
5 | TSHS 10,000/= USD 10 |
| TZS 2622-1:2021/ISO 15788-1:1999 | 2021 | Animal and vegetable fats and oils — Determination of stigmastadienes in vegetable oils — Part 1: Method using capillary-column gas chromatography (Reference method) Specifies a method for the determination of stigmastadienes in virgin vegetable oils containing low concentrations of these hydrocarbons, particularly in virgin olive oil. 67.200.10 ISO 15788-1:1999 |
9 | TSHS 15,000/= USD 15 |
| TZS 2999-2:2021/ EAS 944-2:2020 | 2021 | Footwear — Specification — Part 2: Children’s shoes (2-6 years) Specifies the requirements, methods of sampling and test for children’s shoes of 2-6 years. ICS 61.060 |
18 | Tshs. 25,000/= USD 25 |
| TZS 2999-1:2021/ EAS 944-1:2020 | 2021 | Footwear — Specification — Part 1: Children’s shoes (2 years and below) Specifies the requirements, methods of sampling and test for children’s shoes of 2 years and below. ICS 61.060 |
17 | Tshs. 25,000/= USD 25 |
| TZS 2608-2:2021/ ISO 10648-2:1994 | 2021 | Containment enclosures — Part 2: Classification according to leak tightness and associated checking methods Gives a classification of containment enclosures according to leak tightness and specifies methods for checking this tightness for the following tests: manufacturing test at the factory; acc ICS : 13.280 ISO 10648-2:1994 |
14 | TSHS 20,000/=USD 20 |
| TZS 2988: 2021/ISO 721: 1991 | 2021 | Rock drilling equipment — Integral stems Specifies the dimensions of integral Sterns used for rock drilling. 73.100.30 ISO 721: 1991 |
4 | TSHS 10,000/= USD 10 |
| TZS 288-4:2021 (2nd Ed)/ISO 1296-4:2017 | 2021 | Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determination by capillary gas chromatography Specifies a method for the determination of fatty acid methyl esters (FAMEs) derived by transesterification or esterification from fats, oils, and fatty acids by capillary gas chromatography 67.200.10 ISO 1296-4:2017 |
21 | Tshs. 30,000/= USD 30 |
| TZS 941:2021/ ISO 2919:2012 | 2021 | Radiological protection — Sealed radioactive sources — General requirements and classification Establishes a classification system for sealed radioactive sources that is based on test performance and specifies general requirements, performance tests, production tests, marking and cert ICS : 13.280 ISO 2919:2012 |
19 | TSHS 25000/=USD 25 |
| TZS 288-3:2021 (2nd Ed)/ISO 1296-3:2017 | 2021 | Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) Specifies a rapid base-catalysed transesterification method for fats and oils with trimethyl sulfonium hydroxide (TMSH) to prepare fatty acid methyl esters. The method is exclusively applica 67.200.10 ISO 1296-3:2017 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2989: 2021/ISO 13756: 2015 | 2021 | Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride Specifies a volumetric method for the determination of silver in silver jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain copper, zinc, c 39.060 ISO 13756: 2015 |
5 | TSHS 10,000/= USD 10 |
| TZS 2604:2021/ ISO 11272:2017 | 2021 | Soil quality — Determination of dry bulk density Specifies three methods for the determination of dry bulk density of soils calculated from the mass and the volume of a soil sample. The methods involve drying and weighing a soil sample, th ICS : 13.080.20 ISO 11272:2017 |
14 | TSHS 20,000/=USD 20 |
| TZS 288-2:2021 (1st Ed)/ISO 12966-2:2017 | 2021 | Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 2: Preparation of methyl esters of fatty acids Specifies methods of preparing the methyl esters of fatty acids. 67.200.10 /ISO 12966-2:2017 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2990: 2021/ISO 11427: 2014 | 2021 | Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide Describes a volumetric method for the determination of silver in jewellery alloys, preferably within the range of fineness stated in ISO 9202. 39.060 ISO 11427: 2014 |
5 | TSHS 10,000/= USD 10 |
| TZS 1662-1:2021/ EAS 942-1:2020 | 2021 | Footwear — Specification — Part 1: Men’s closed shoes Specifies the requirements, methods of sampling and test for men’s closed shoes. ICS 61.060 |
18 | Tshs. 25,000/= USD 25 |
| TZS 288-1:2021 (1st Ed)/ISO 12966-1:2014 | 2021 | Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters Gives an overview of the gas chromatographic determination of fatty acids, free and bound, in animal and vegetable fats and oils following their conversion to fatty acid methyl esters (FAMEs 67.200.10 ISO 12966-1:2014 |
7 | TSHS 15,000/= USD 15 |
| TZS 2603:2021/ ISO 11260:2018 | 2021 | Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution Specifies a method for the determination of the cation exchange capacity (CEC) at the pH of the soil and for the determination of the content of exchangeable sodium, potassium, calcium and m ICS : 13.080.10 ISO 11260:2018 |
12 | TSHS 20,000/=USD 20 |
| TZS 2984: 2021/ISO 18806: 2019 | 2021 | Solid mineral fuels — Determination of chlorine content Specifies two methods (high temperature combustion and high pressure vessel combustion) for the determination of chlorine in solid mineral fuels. It is applicable to solid mineral fuels. 75.160.10 ISO 18806: 2019 |
13 | TSHS 20,000/= USD 20 |
| TZS 2601:2021/ ISO 25177:2019 | 2021 | Soil quality — Field soil description Provides guidance on the description of soil in the field and its environmental context. It is applicable to natural, near-natural, urban and industrial sites. The soil observa ICS : 13.080.01 ISO 25177:2019 |
50 | TSHS 55000/=USD 55 |
| TZS 1422:2021/ EAS 971:2020 | 2021 | Textiles — Fabrics for household curtains and drapery — Specification Specifies performance requirements, sampling and test methods of fabrics for curtains and drapery. ICS 59.080.30 |
7 | TSHS 15,000/= USD 15 |
| TZS 2983: 2021/ISO 540: 2008 | 2021 | Hard coal and coke — Determination of ash fusibility Specifies a method of determining the characteristic fusion temperatures of ash from coal and coke. 73.040 ISO 540: 2008 |
10 | TSHS 15,000/= USD 15 |
| TZS 2982-1/ISO 5071-1: 2013 | 2021 | Brown coals and lignites — Determination of the volatile matter in the analysis sample — Part 1: Two-furnace method Specifies a method of determining the volatile matter of brown coals and lignites. 73.040 ISO 5071-1: 2013 |
8 | TSHS 15,000/= USD 15 |
| TZS 2600:2021/ ISO 13536:1995 | 2021 | Soil quality — Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 Specifies a method for the determination of the potential cation exchange capacity (CEC) of soil buffered at pH = 8,1 and of the determination of the content of exchangeable sodium, potassiu ICS : 13.080.10 ISO 13536:1995 |
7 | TSHS 15,000/=USD 15 |
| TZS 1371-1:2021/ISO 12228-1:2014 | 2021 | Determination of individual and total sterols contents — Gas chromatographic method — Part 1: Animal and vegetable fats and oils Specifies a procedure for the gas chromatographic determination of the content and composition of sterols in animal and vegetable fats and oils. 67.200.10 ISO 12228-1:2014 |
24 | Tshs. 30,000/= USD 30 |
| TZS 2998: 2021/ISO 22932-2: 2020 | 2021 | Mining — Vocabulary — Part 2: Geology Specifies the geologic terms commonly used in mining. Only those terms that have a specific meaning in this field are included. 01.040.73 ISO 22932-2: 2020 |
44 | TSHS 50,000/= USD 50 |
| TZS 2599 :2021/ ISO 11465: 1993 | 2021 | Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method Specified can be applied to all types of soil samples. Different procedures are specified for air-dried soil samples, e.g. samples pretreated according to ISO 11464, and for field ICS : 13.080.20 ISO 11465: 1993 |
3 | TSHS 10,000/=USD 10 |
| TZS 3205-3:2021/ ISO 20290-3:2019 | 2021 | Aggregates for concrete — Test methods for mechanical and physical properties — Part 3: Determination of aggregate crushing value (ACV) Gives the determination of aggregate crushing value (ACV) of aggregates. ICS : 91.100.30 ISO 20290-3:2019 |
8 | TSHS 15,000/= USD 15 |
| TZS 1371-2:2021/ISO 12228-2:2014 | 2021 | Determination of individual and total sterols contents — Gas chromatographic method — Part 2: Olive oils and olive pomace oils Specifies a procedure for the gas chromatographic determination of the contents and composition of sterols and triterpene dialcohols in olive and olive pomace oils. 67.200.10 /ISO 12228-2:2014 |
16 | Tshs. 25,000/= USD 25 |
| TZS 2602:2021/ ISO 10694:1995 | 2021 | Soil quality — Determination of organic and total carbon after dry combustion (elementary analysis) Specifies a method for the determination of the total carbon content in soil after dry combustion. The organic carbon content is calculated from this content after correcting for carbonates ICS : 13.080.10 ISO 10694:1995 |
7 | TSHS 15,000/=USD 15 |
| TZS 2997: 2021/ISO 3084: 1998 | 2021 | Iron ores — Experimental methods for evaluation of quality variation Specifies experimental methods for the evaluation of quality variation of iron ores for each type of iron ore being traded and for each handling plant. 73.060.10 ISO 3084: 1998 |
18 | TSHS 25,000/= USD 25 |
| TZS 2996: 2021/ISO 3086: 2006 | 2021 | Iron ores — Experimental methods for checking the bias of sampling Specifies experimental methods for checking the bias of sampling of iron ores, when sampling is carried out in accordance with the methods specified in ISO 3082, having as reference a stoppe 73.060.10 ISO 3086: 2006 |
23 | TSHS 30,000/= USD 30 |
| TZS 3205-2:2021/ ISO 20290-2:2019 | 2021 | Aggregates for concrete — Test methods for mechanical and physical properties — Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test) Describes the Los Angeles test, for determining the resistance to fragmentation of coarse aggregates. ICS : 91.100.30 ISO 20290-2:2019 |
6 | TSHS 15,000/= USD 15 |
| TZS 2995: 2021/ISO 3085: 2019 | 2021 | Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement Specifies experimental methods for checking the precision of sampling, sample preparation and measurement of iron ores being carried out in accordance with the methods specified in ISO 3082 73.060.10 ISO 3085: 2019 |
18 | TSHS 25,000/= USD 25 |
| TZS 2620:2021(2nd Ed )/ISO 6884:2008 | 2021 | Animal and vegetable fats and oils — Determination of ash Specifies a method for the determination of ash, applicable to all animal and vegetable fats and oils, including acid oils. 67.200.10 ISO 6884:2008 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3150:2021/ ISO 20292:2009 | 2021 | Materials for the production of primary aluminium — Dense refractory bricks — Determination of cryolite resistance Covers materials for the production of primary aluminium. ICS : 71.060.50 ISO 20292:2009 |
7 | TSHS 15,000/= USD 15 |
| TZS 2597:2021/ ISO 16000-5:2007 | 2021 | Indoor air — Part 5: Sampling strategy for volatile organic compounds (VOCs) Intended as an aid to planning volatile organic compound (VOC) indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the entire measu ICS : 13.040.20 ISO 16000-5:2007 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2994: 2021/ISO 3087: 2020 | 2021 | Iron ores — Determination of the moisture content of a lot Specifies a method for the determination of the moisture content of a lot of iron ore. This method is applicable to all iron ores, whether natural or processed. 73.060.10 ISO 3087: 2020 |
35 | TSHS 40,000/= USD 40 |
| TZS 3112:2021/ ISO 16999:2003 | 2021 | Wood-based panels — Sampling and cutting of test pieces Specifies certain rules for the sampling and cutting of test pieces. ICS : 79.060.01 ISO 16999:2003 |
5 | TSHS 10,000/ USD 10 |
| TZS 2621:2021(3rd Ed )/ISO 6886:2016 | 2021 | Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test) Specifies a method for the determination of the oxidative stability of fats and oils under extreme conditions that induce rapid oxidation: high temperature and high air flow. 67.200.10 ISO 6886:2016 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3104-5:2021/ ISO 12460-5:2015 | 2021 | Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perforator method) Specifies an extraction method known as the "perforator method". ICS : 79.060.01 ISO 12460-5:2015 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2901: 2021/ISO 3082: 2017 | 2021 | Iron ores — Sampling and sample preparation procedures Provides; a) the underlying theory, b) the basic principles for sampling and preparation of samples, and, c) the basic requirements for the design, installation and operation of sampling sys 73.060.10 ISO 3082: 2017 |
83 | TSHS 90,000/= USD 90 |
| TZS 2596:2021/ ISO 14080:2018 | 2021 | Greenhouse gas management and related activities — Framework and principles for methodologies on climate actions Gives guidelines by means of a framework and principles for establishing approaches and processes to: identify, assess and revise methodologies; develop methodologies; ICS : 13.020.40 ISO 14080:2018 |
36 | TSHS 45,000/=USD 45 |
| TZS 2595:2021/ ISO 14067:2018 | 2021 | Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification Specifies principles, requirements and guidelines for the quantification and reporting of the carbon footprint of a product (CFP), in a manner consistent with International Standards on life ICS : 13.020.40 ISO 14067:2018 |
46 | TSHS 55,000/=USD 55 |
| TZS 799:2021(1st Ed)/ISO 16050:2003 | 2021 | Foodstuffs — Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products — High-performance liquid chromatographic method Specifies a reverse-phase high-performance liquid chromatographic method, with immunoaffinity column clean-up and post-column derivatization, for the determination of aflatoxins in cereals, 67.060 ISO 16050:2003 |
12 | Tshs. 20,000/= USD 20 |
| TZS 3104-4:2021/ ISO 12460-4:2016 | 2021 | Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method Specifies a desiccator method for the determination of the quantity of formaldehyde emitted from particleboard, fibreboard, plywood, oriented strand board (OSB) and wooden laminated flooring ICS : 79.060.01 ISO 12460-4:2016 |
9 | TSHS 15,000/= USD 15 |
| TZS 2594-3:2021/ ISO 14064-3:2019 | 2021 | Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements Specifies principles and requirements and provides guidance for verifying and validating greenhouse gas (GHG) statements.It is applicable to organization, project and product GHG statements. ICS : 13.020.40 ISO 14064-3:2019 |
54 | TSHS 60,000/=USD 60 |
| TZS 2902: 2021/ISO 11323: 2010 | 2021 | Iron ore and direct reduced iron — Vocabulary Gives the definitions for terms used in TC 102 standards for sampling, sample preparation, moisture and particle size analysis and physical testing of iron ore and direct reduced iron. Some 01.040.73 ISO 11323: 2010 |
21 | TSHS 40,000/= USD 40 |
| TZS 2617-1:2021(1st Ed)/ 16634-1:2008 | 2021 | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 1: Oilseeds and animal feeding s Specifies a method for the determination of the total nitrogen content and the calculation of crude protein content of oilseeds and animal feeding stuffs. 65.120 ISO 16634-1:2008 |
30 | TSHS 35,000/= USD 35 |
| TZS 3104-3:2021/ ISO 12460-3:2020 | 2021 | Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method Specifies a procedure for determination of accelerated formaldehyde release from uncoated and coated wood-based panels using the gas analysis method. ICS :79.060.01 ISO 12460-3:2020 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2594-2:2021/ ISO 14064-2:2019 | 2021 | Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements Specifies principles and requirements and provides guidance at the project level for the quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emissio ICS : 13.020.40 ISO 14064-2:2019 |
26 | TSHS 35000/=USD 35 |
| TZS 2594-1:2021/ ISO 14064-1:2018 | 2021 | Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals Specifies principles and requirements at the organization level for the quantification and reporting of greenhouse gas (GHG) emissions and removals. It includes requirements for the design, ICS : 13.020.40 ISO 14064-1:2018 |
47 | TSHS 55,000/=USD 55 |
| TZS 3104-1:2021/ ISO 12460-1:2007 | 2021 | Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the 1-cubic-metre chamber method Specifies a 1 m3 chamber method for the determination of the formaldehyde emission from wood-based panels under defined conditions, relating to typical conditions in real-life. ICS : 79.060.01 ISO 12460-1:2007 |
19 | Tshs. 25,000/= USD 25 |
| TZS 3101:2021/ ISO 18775:2020 | 2021 | Veneers — Terms and definitions, determination of physical characteristics and tolerances Establishes the standard terms and definitions (including those relative to features and defects), the methods for the determination of physical characteristics and the tolerances for dimens ICS : 01.040.79 ISO 18775:2020 |
19 | Tshs. 25,000/= USD 25 |
| TZS 1857-3:2021/ ISO 7393-3:1990 | 2021 | Water quality — Determination of free chlorine and total chlorine — Part 3: Iodometric titration method for the determination of total chlorine Specifies a procedure for water. It is applicable for the measurement of concentrations, in terms of chlorine, from 0,01 to 0,21 mmol/l. The interfering substances are given. In annex B a pr ICS : 13.060.50 ISO 7393-3:1990 |
7 | TSHS 15,000/=USD 15 |
| TZS 3099:2021/ ISO 16979:2003 | 2021 | Wood-based panels — Determination of moisture content Specifies a method for determining the moisture content of wood-based panels. ICS : 79.060.01 ISO 16979:2003 |
3 | Tshs. 10,000/= USD 10 |
| TZS 1857-2:2021/ ISO 7393-2:2017 | 2021 | Water quality — Determination of free chlorine and total chlorine — Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes Specifies a method for the determination of free chlorine and total chlorine in water, readily applicable to lab- and field-testing. It is based on measurement of the absorption, the red DPD ICS : 13.060.50 ISO 7393-2:2017 |
19 | TSHS 25000/=USD 25 |
| TZS 3097:2021/ ISO 16978:2003 | 2021 | Wood-based panels — Determination of modulus of elasticity in bending and of bending strength Specifies a method for determining the apparent modulus of elasticity and bending strength of wood-based panels in flatwise bending. ICS : 79.060.01 ISO 16978:2003 |
5 | TSHS 10,000/ USD 10 |
| TZS 1869-3:2021/ ISO 9964-3:1993 | 2021 | Water quality — Determination of sodium and potassium — Part 3: Determination of sodium and potassium by flame emission spectrometry Specified is aspirating the sample into a gas flame of sufficient thermal energy to cause any sodium and potassium present to emit its characteristic radiation and measuring the intensity at ICS : 13.060.50 ISO 9964-3:1993 |
5 | TSHS 10,000/=USD 10 |
| TZS 3096:2021/ ISO 16572:2008 | 2021 | Timber structures — Wood-based panels — Test methods for structural properties Specifies test methods for determining the structural properties of commercial wood-based and lignocellulosic fibrous panel products for use in load-bearing timber structures. ICS : 79.060.01 ISO 16572:2008 |
28 | Tshs. 35,000/= USD 35 |
| TZS 1869-2:2021/ISO 9964-2:1993 | 2021 | Water quality — Determination of sodium and potassium — Part 2: Determination of potassium by atomic absorption spectrometry Specified is adding a caesium chloride solution to the sample as an ionization suppressant, aspirating the sample directly into the air/acetylene flame of an atomic absorption spectrometer a ICS : 13.060.50 ISO 9964-2:1993 |
4 | TSHS 10,000/=USD 10 |
| TZS 3095:2021/ ISO 9427:2003 | 2021 | Wood-based panels — Determination of density Specifies a method for determining the density of wood-based panels. ICS : 79.060.01 ISO 9427:2003 |
3 | TSHS 10,000/ USD 10 |
| TZS 3094:2021/ ISO 9426:2003 | 2021 | Wood-based panels — Determination of dimensions of panels Specifies methods for measuring the thickness, width and length, as well as the squareness, edge straightness and flatness of wood-based panels. ICS : 79.060.01 ISO 9426:2003 |
5 | TSHS 10,000/ USD 10 |
| TZS 3093:2021/ ISO 9424:2003 | 2021 | Wood-based panels — Determination of dimensions of test pieces Specifies a method for measuring the thickness, length and width of test pieces of wood-based panels. ICS : 79.060.01 ISO 9424:2003 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2801:2021/ ISO 2965:2019 | 2021 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeabil Specifies a method for the determination of air permeability (AP).It is applicable to materials used as cigarette papers, filter plug wrap and filter joining paper, including materials havin ICS : 65.160 ISO 2965:2019 |
27 | TSHS 35000/=USD 35 |
| TZS 2948-1:2021/ ISO 12466-1:2007 | 2021 | Plywood — Bonding quality — Part 1: Test methods Specifies methods for determining the bonding quality of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resin, by shear testing. ICS : 79.060.10 ISO 12466-1:2007 |
16 | Tshs. 25,000/= USD 25 |
| TZS 3110:2021/ ISO 15822:2007 | 2021 | Test method of doorset opening performance in diagonal deformation — Seismic aspects Specifies the test method for evaluating the opening function of single-leaf doorset under in-plane diagonal deformation by in-plane static load. ICS : 91.060.50 ISO 15822:2007 |
11 | Tshs. 20,000/= USD 20 |
| TZS 3108:2021/ ISO 9380:1990 | 2021 | Doorsets — Repeated torsion test Specifies the method to be used to determine the effect of repeated torsion on doorsets and their hardware. ICS : 91.060.50 ISO 9380:1990 |
3 | Tshs. 10,000/= USD 10 |
| TZS 3107:2021/ ISO 15821:2007 | 2021 | Doorsets and windows — Water-tightness test under dynamic pressure — Cyclonic aspects Specifies a test method for determining the water-tightness under dynamic pressure of doorsets and windows, assembled for normal use and installed as in practice. ICS : 91.060.50 ISO 15821:2007 |
9 | Tshs. 15,000/= USD 15 |
| TZS 3106:2021/ ISO 8248:1985 | 2021 | Windows and door height windows — Mechanical tests Determines the forces necessary for opening and closing Examines the reaction to tests simulating misuse and the efficiency of locking devices or registred opening devices. ICS : 91.060.50 ISO 8248:1985 |
20 | Tshs. 25,000/= USD 25 |
| TZS 3105:2021/ ISO 9379:2005 | 2021 | Operating forces — Test method — Doors Applicable to the manual operation doorsets. The tests are applicable to doorsets of any material. ICS : 91.060.50 ISO 9379:2005 |
6 | TSHS 15,000/= USD 15 |
| TZS 3102:2021/ ISO 8273:1985 | 2021 | Doors and doorsets — Standard atmospheres for testing the performance of doors and doorsets placed between different climates Applies to extenal and internal elements in ordinary buildings and houses, but do not apply to doors and doorsets in rooms with special atmospheres (such as doors to freezing rooms,etc.). ICS : 91.060.50 ISO 8273:1985 |
2 | Tshs. 10,000/= USD 10 |
| TZS 3100:2021/ ISO 8272:1985 | 2021 | Doorsets — Air permeability test Specifies a method for the deter-mination of the air permeability of doorsets to be fitted in ex-terior walls and supplied in the form of completely assembled and finished units. ICS : 91.060.50 ISO 8272:1985 |
3 | TSHS 10,000/ USD 10 |
| TZS 3028-2:2021/ ISO 10406-2:2015 | 2021 | Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets Specifies test methods applicable to fibre-reinforced polymer (FRP) sheets for the upgrading of concrete members. ICS : 83.120 ISO 10406-2:2015 |
35 | Tshs. 40,000/= USD 40 |
| TZS 3028-1:2021/ ISO 10406-1:2015 | 2021 | Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids Specifies test methods applicable to fibre-reinforced polymer (FRP) bars and grids as reinforcements or pre-stressing tendons in concrete. ISO 10406-1:2015 |
39 | Tshs. 45,000/= USD 45 |
| TZS 3036:2021/ ISO/TR 16475:2020 | 2021 | General practices for the repair of water-leakage cracks in concrete structures Provides a guideline for the selection of a proper grout material to repair water leakage through cracks and other deformities in concrete structures. ICS : 91.080.40 ISO/TR 16475:2020 |
15 | Tshs. 20,000/= USD 20 |
| TZS 3033-3:2021/ ISO 14824-3:2012 | 2021 | Grout for prestressing tendons — Part 3: Test methods Describes the test methods for grout specified in ISO 14824-1. ICS : 91.100.30 ISO 14824-3:2012 |
11 | Tshs. 20,000/= USD 20 |
| TZS 3033-2:2021/ ISO 14824-2:2012 | 2021 | Grout for prestressing tendons — Part 2: Grouting procedures Gives the procedures to be used for grouting of tendons in post-tensioned prestressed concrete. ICS : 91.100.30 ISO 14824-2:2012 |
11 | Tshs. 20,000/= USD 20 |
| TZS 3032:2021/ ISO 22966:2009 | 2021 | Execution of concrete structures Gives common requirements for the execution of concrete structures and applies to both in-situ works and construction using prefabricated concrete elements. ICS : 91.080.40 ISO 22966:2009 |
59 | Tshs. 65,000/= USD 65 |
| TZS 3030-1:2021/ ISO 22965-1:2007 | 2021 | Concrete — Part 1: Methods of specifying and guidance for the specifier Applies to concrete for structures cast in situ, pre-cast structures and structural pre-cast products for buildings and civil engineering structures. ICS : 91.100.30 ISO 22965-1:2007 |
22 | Tshs. 30,000/= USD 30 |
| TZS 3029:2021/ ISO 16204:2012 | 2021 | Durability — Service life design of concrete structures Specifies principles and recommends procedures for the verification of the durability of concrete structures subject to: — known or foreseeable environmental actions causing material deterio ICS : 91.080.40 ISO 16204:2012 |
31 | Tshs. 40,000/= USD 40 |
| TZS 3171:2021/ ISO 20336:2017 | 2021 | Solid mineral fuels — Determination of total sulfur by Coulomb titration method Specifies an alternative method of determining the total sulfur content of coal and coke by high-temperature combustion ? Coulomb titration. ICS : 75.160.10 ISO 20336:2017 |
6 | TSHS 15,000/= USD 15 |
| TZS 3170:2021/ ISO 19579:2006 | 2021 | Solid mineral fuels — Determination of sulfur by IR spectrometry Specifies an alternative method of determining the total sulfur content of hard coal, brown coal, and lignite by high-temperature combustion and infrared absorption using commercially availa ICS : 73.040 ISO 19579:2006 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3169:2021/ ISO 15238:2016 | 2021 | Solid mineral fuels — Determination of total cadmium content of coal Specifies a procedure for the determination of the total cadmium content of coal. ICS : 73.040 ISO 15238:2016 |
5 | TSHS 10,000/ USD 10 |
| TZS 3167:2021/ ISO 3551-1:1992 | 2021 | Rotary core diamond drilling equipment — System A — Part 1: Metric units Specifies the characteristics of a range of equipment for drilling holes having diameters from 30 mm to 200 mm and yielding cores having diameters from 18,5 mm to 165 mm. ICS: 73.100.30 ISO 3551-1:1992 |
79 | Tshs. 85,000/= USD 85 |
| TZS 3164:2021/ ISO 3552-1:1992 | 2021 | Rotary core diamond drilling equipment — System B — Part 1: Metric units Specifies the characteristics of a range of equipment for drilling holes having diameters from 36 mm to 146 mm and yielding cores from 22 mm to 120 mm in diameter ICS : 73.100.30 ISO 3552-1:1992 |
43 | TSHS 50,000/= USD 50 |
| TZS 3144:2021/ ISO 8995-3:2018 | 2021 | Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places Specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places. ICS : 13.180 ISO 8995-3:2018 |
7 | Tshs. 15,000/= USD 15 |
| TZS 3145:2021/ ISO 8995-1:2002 | 2021 | Lighting of work places — Part 1: Indoor Specifies lighting requirements for indoor work places and for people to perform the visual tasks efficiently, in comfort and safety throughout the whole work period. ICS : 13.180 ISO 8995-1:2002 |
18 | Tshs. 25,000/= USD 25 |
| TZS 3059:2021/ ISO 11222:2002 | 2021 | Air quality — Determination of the uncertainty of the time average of air quality measurements Provides a method for the quantification of the uncertainty of a time average of a set of air quality data obtained at a specified location over a defined averaging time period. ICS : 13.040.01 ISO 11222:2002 |
20 | Tshs. 25,000/= USD 25 |
| TZS 3058:2021/ ISO 19087:2018 | 2021 | Workplace air — Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy Is a standard for the analysis by Fourier-Transform Infrared (FTIR) of respirable crystalline silica (RCS) in samples of air collected on collection substrates (i.e. filters or foams). ICS : 13.040.30 ISO 19087:2018 |
30 | Tshs. 35,000/= USD 35 |
| TZS 3057:2021/ ISO 9359:1989 | 2021 | Air quality — Stratified sampling method for assessment of ambient air quality Enables results which are independent of the actual meteorological conditions prevailing during the interval of time of measurement to be calculated for a longer time. ICS :13.040.20 ISO 9359:1989 |
12 | Tshs. 20,000/= USD 20 |
| TZS 3039:2021/ ISO 22450:2020 | 2021 | Recycling of rare earth elements — Requirements for providing information on industrial waste and end-of-life products Specifies the recycling information to be provided for rare earth elements (REEs) in industrial waste and end-of-life (EOL) products from manufacturers/producers to recyclers. ICS : 13.030.30 ISO 22450:2020 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3040:2021/ ISO 22444-2:2020 | 2021 | Rare earth — Vocabulary — Part 2: Metals and their alloys Defines the terms for rare earth metals and their alloys, as well as for methods of preparation and purification. ICS : 01.040.13 ISO 22444-2:2020 |
10 | Tshs. 15,000/= USD 15 |
| TZS 3041:2021/ ISO 22444-1:2020 | 2021 | Rare earth — Vocabulary — Part 1: Minerals, oxides and other compounds Defines the terms for rare earth minerals, oxides and other compounds, as well as for related production processes. ICS : 01.040.13 ISO 22444-1:2020 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3042:2021/ ISO 16304:2018 | 2021 | Ships and marine technology — Marine environment protection — Arrangement and management of port waste reception facilities Provides a method for addressing ship generated waste and cargo residues from when they are offloaded from the ship, to how they are managed ashore. ICS :13.020.99 ISO 16304:2018 |
23 | Tshs. 30,000/= USD 30 |
| TZS 3043:2021/ ISO 21070:2017 | 2021 | Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage Specifies procedures for the shipboard management of garbage, including handling, collection, separation, marking, treatment, and storage. ICS : 13.020.99 ISO 21070:2017 |
19 | Tshs. 25,000/= USD 25 |
| TZS 3044:2021/ ISO 17422:2018 | 2021 | Plastics — Environmental aspects — General guidelines for their inclusion in standards Provides a structure for inclusion of environmental aspects in standards for plastics products. ICS : 13.020.01 ISO 17422:2018 |
12 | Tshs. 20,000/= USD 20 |
| TZS 3045:2021/ ISO 15270:2008 | 2021 | Plastics — Guidelines for the recovery and recycling of plastics waste Provides guidance for the development of standards and specifications covering plastics waste recovery, including recycling. ICS :13.030.50 ISO 15270:2008 |
14 | Tshs. 20,000/= USD 20 |
| TZS 3218:2021/ ISO 22868:2021 | 2021 | Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) Specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest ICS : 13.140 ISO 22868:2021 |
37 | Tshs. 45,000/= USD 45 |
| TZS 3217:2021/ ISO 8084:2003 | 2021 | Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements Establishes a laboratory test method and performance requirements for operator protective structures (OPS) on self-propelled forestry machines. ICS : 65.060.80 ISO 8084:2003 |
4 | TSHS 10,000/ USD 10 |
| TZS 3216:2021/ ISO 11850:2011 | 2021 | Machinery for forestry — General safety requirements Specifies general safety requirements for self-propelled forestry machines and machines configured as forestry machines. ICS : 65.060.80 ISO 11850:2011 |
18 | Tshs. 25,000/= USD 25 |
| TZS 3215:2021/ ISO 18564:2016 | 2021 | Machinery for forestry — Noise test code Specifies all the information necessary for carrying out efficiently and under standardised conditions the noise emission values of self-propelled forestry machinery. ICS : 17.140.20 ISO 18564:2016 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3214:2021/ ISO 8224-1:2003 | 2021 | Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods Specifies the operational characteristics of, and laboratory and field test methods for, traveller irrigation machines. ICS : 65.060.35 ISO 8224-1:2003 |
36 | Tshs. 45,000/= USD 45 |
| TZS 2823-9:2021/ ISO 4210-9:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods Specifies saddle and seat-post test methods for ISO 4210‑2. ICS : 43.150 ISO 4210-9:2014 |
6 | TSHS 15,000/= USD 15 |
| TZS 2823-8:2021/ ISO 4210-8:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods Specifies pedal and drive system test methods for ISO 4210‑2. ICS : 43.150 ISO 4210-8:2014 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2823-7:2021/ ISO 4210-7:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods Specifies wheel and rim test methods for ISO 4210‑2. ICS : 43.150 ISO 4210-7:2014 |
7 | TSHS 15,000/= USD 15 |
| TZS 3213-2:2021/ ISO /TS 11155-2:2009 | 2021 | Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration Specifies a test comprising several methods for measuring the dynamic gas adsorption of air filters in the passenger compartments of road vehicles. ICS :43.040.60 ISO /TS 11155-2:2009 |
17 | Tshs. 25,000/= USD 25 |
| TZS 3213-1:2021/ ISO /TS 11155-1:2001 | 2021 | Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtration Specifies a particulate filtration test, including the critical characteristics of equipment, test procedure and report format, for the consistent assessment of filter elements in a laborato ICS : 43.040.60 ISO /TS 11155-1:2001 |
38 | Tshs. 45,000/= USD 45 |
| TZS 3208-5:2021/ ISO 29463-5:2011 | 2021 | High-efficiency filters and filter media for removing particles in air — Part 5: Test method for filter elements Specifies the reference test procedure for determining the efficiency of filters at their most penetrating particle size (MPPS). ICS : 91.140.30 ISO 29463-5:2011 |
23 | Tshs. 30,000/= USD 30 |
| TZS 3208-4:2021/ ISO 29463-4:2011 | 2021 | High-efficiency filters and filter media for removing particles in air — Part 4: Test method for determining leakage of filter elements-Scan method Specifies the test procedure of the "scan method", considered to be the reference method, for determining the leakage of filter elements. ICS : 91.140.30 ISO 29463-4:2011 |
38 | TSHS 45,000/= USD 45 |
| TZS 3208-3:2021/ ISO 29463-3:2011 | 2021 | High-efficiency filters and filter media for removing particles in air — Part 3: Testing flat sheet filter media Specifies the test procedure for testing the efficiency of flat sheet filter media. It is intended for use in conjunction with ISO 29463-1, ISO 29463-2, ISO 29463-4 and ISO 29463-5. ICS : 91.140.30 ISO 29463-3:2011 |
20 | Tshs. 25,000/= USD 25 |
| TZS 3189:2021/ ISO 1460:2020 | 2021 | Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area Specifies a method of determining the mass per unit area of hot dip galvanized coatings on ferrous materials. ICS : 25.220.40 ISO 1460:2020 |
3 | TSHS 10,000/ USD 10 |
| TZS 3208-2:2021/ ISO 29463-2:2011 | 2021 | High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics Specifies the aerosol production and measuring equipment used for testing high-efficiency filters and filter media in accordance with ISO 29463-3, ISO 29463-4 and ISO 29463-5, as well as the ICS : 91.140.30 ISO 29463-2:2011 |
26 | TSHS 35,000/= USD 35 |
| TZS 3156-2:2021/ ISO 8283-2:1992 | 2021 | Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE) Specifies the design formulae and the derived dimensions, together with tolerances, of sockets and spigots for joints of PE fittings and for integral sockets of PE pipes intended for use in ICS : 23.040.20 ISO 8283-2:1992 |
4 | TSHS 10,000/ USD 10 |
| TZS 3156-1:2021/ ISO 8283-1:1991 | 2021 | Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chlorid Establishes a classification and designation system for sockets and specifies the design formulae and the derived dimensions, together with tolerances, of these sockets and of spigots for jo ICS : 23.040.20 ISO 8283-1:1991 |
9 | Tshs. 15,000/= USD 15 |
| TZS 3051-3:2021/ ISO 2286-3:2016 | 2021 | Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness Specifies a method for the determination, at a specified pressure, of the thickness of rubber- and plastics-coated fabrics, irrespective of the type of substrate employed. ICS : 59.080.40 ISO 2286-3:2016 |
3 | TSHS 10,000/ USD 10 |
| TZS 3051-2:2021/ ISO 2286-2:2016 | 2021 | Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit are Specifies methods of determining the total mass per unit area, the mass per unit area of the coating and the mass per unit area of the substrate cloth of a rubber- or plastics-coated fabric. ICS : 59.080.40 ISO 2286-2:2016 |
6 | Tshs. 15,000/= USD 15 |
| TZS 3051-1:2021/ ISO 2286-1:2016 | 2021 | Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass Specifies methods of determining the length, width and net mass of a roll of rubber- or plastics-coated fabrics. ICS : 59.080.40 ISO 2286-1:2016 |
3 | TSHS 10,000/ USD 10 |
| TZS 2645:2021 (1st Ed)/ISO 29842:2011 | 2021 | Sensory analysis — Methodology — Balanced incomplete block designs Specifies a method for the application of balanced incomplete block designs to sensory descriptive and hedonic tests. 67.240 ISO 29842:2011 |
19 | Tshs. 25,000/= USD 25 |
| TZS 2644:2021/ISO 16820:2004 | 2021 | Sensory analysis — Methodology — Sequential analysis Describes a procedure for statistically analysing data from forced-choice sensory discrimination tests, such as the Triangle, Duo-Trio, 3-AFC, 2-AFC, in which after every trial of the discri 67.240 ISO 16820:2004 |
10 | TSHS 15,000/= USD 15 |
| TZS 2960:2021/ ISO 935:1988 | 2021 | Animal and vegetable fats and oils — Determination of titre Specifies a method for the preparation of the water-insoluble fatty acide and determination of their solidification temperature. The method is not applicable to titres below 30 degrees centi ICS : 67.200.10 ISO 935:1988 |
3 | TSHS 10,000/=USD 10 |
| TZS 2643:2021(2nd Ed)/ISO 10399 :2017 | 2021 | Sensory analysis — Methodology — Duo-trio test Specifies a procedure for determining whether a perceptible sensory difference or similarity exists between samples of two products. The method is a forced-choice procedure. The method is ap ISO 10399 :2017 |
7 | TSHS 15,000/= USD 15 |
| TZS 1370:2021/ ISO 9936:2016 | 2021 | Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography Specifies a method for the determination of the contents of free α-, β-, γ-, and δ-tocopherols and tocotrienols (referred to jointly as tocols) in animal and vegetable fats and oils (referre ICS : 67.200.10 ISO 9936:2016 |
16 | TSHS 25000/=USD 25 |
| TZS 2642:2021(2nd Ed)/ISO 8587 :2006 | 2021 | Sensory analysis — Methodology — Ranking Describes a method for sensory evaluation with the aim of placing a series of test samples in rank order. 67.240 ISO 8587 :2006 |
21 | Tshs. 30,000/= USD 30 |
| TZS 3109:2021/ ISO 15702:1998 | 2021 | Leather — Tests for colour fastness — Colour fastness to machine washing Specifies a method for determining the resistance of leather to washing in a washing machine under specified conditions. ICS : 59.140.30 ISO 15702:1998 |
6 | TSHS 15,000/= USD 15 |
| TZS 3111:2021/ ISO 15703:1998 | 2021 | Leather — Tests for colour fastness — Colour fastness to mild washing Specifies a method for determining the resistance of leather to mild washing under specified conditions. ICS : 59.140.30 ISO 15703:1998 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2641:2021/ISO 5495 :2005 | 2021 | Sensory analysis — Methodology — Paired comparison test Describes a procedure for determining whether there exists a perceptible sensory difference or a similarity between samples of two products concerning the intensity of a sensory attribute 67.240 ISO 5495:2005 |
21 | Tshs. 30,000/= USD 30 |
| TZS 3088-1:2021/ ISO 16663-1:2009 | 2021 | Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh Specifies a method for the determination of the size of the mesh opening of fishing nets, using an objective mesh gauge. It is applicable to active and passive fishing gear. ICS : 65.150 ISO 16663-1:2009 |
8 | TSHS 15,000/= USD 15 |
| TZS 3088-2:2021/ ISO 16663-2:2003 | 2021 | Fishing nets — Method of test for the determination of mesh size — Part 2: Length of mesh Specifies a method for the determination of mesh length of fishing nets using a ruler. It is applicable to passive fishing gears. ICS : 65.150 ISO 16663-2:2003 |
3 | TSHS 10,000/ USD 10 |
| TZS 3114:2021/ ISO 9865:1991 | 2021 | Textiles — Determination of water repellency of fabrics by the Bundesmann rain-shower test Describes the principle, the atmosphere for conditioning and testing, the preparation of test specimens, the apparatus and materials, the equipment calibration, the procedure, the expression ICS : 59.080.30 ISO 9865:1991 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3115:2021/ ISO 811:2018 | 2021 | Textiles — Determination of resistance to water penetration — Hydrostatic pressure test Specifies a hydrostatic pressure method for determining the resistance of fabrics to penetration by water. ICS :59.080.30 ISO 811:2018 |
5 | Tshs. 10,000/= USD 10 |
| TZS 3206:2021/ ISO 4167:2006 | 2021 | Polyolefin agricultural twines Specifies the principal properties of polyolefin agricultural twines, the test methods which permit their verification, and the form of delivery for the twines. ICS : 59.080.50 ISO 4167:2006 |
11 | Tshs. 20,000/= USD 20 |
| TZS 1372:2021/ ISO 12873:2010 | 2021 | Olive oils and olive-pomace oils — Determination of wax content by capillary gas chromatography Specifies the determination of the wax content, as a mass fraction expressed in milligrams per kilogram, of olive oils and olive-pomace oils. The individual waxes are separated according to ICS : 67.200.10 ISO 12873:2010 |
9 | TSHS 15,000/=USD 15 |
| TZS 2591-2:2021 (1st Ed)/ISO 15592-2:2001 | 2021 | Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 2: Atmosphere for conditioning and testing Specifies an atmosphere for conditioning and testing samples of fine-cut tobacco and test pieces made from it 65.160 ISO 15592-1:2001 |
5 | Tshs. 10,000/= USD 10 |
| TZS 3186:2021/ IEC 62108:2016 | 2021 | Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval Specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-a ICS:27.160 |
56 | |
| TZS 3015:2021/ ISO 20588:2019 | 2021 | Animal feeding stuffs — Vocabulary Defines terms relating to animal feeding stuffs. NOTE It includes the most common and frequently used terms in the field of animal feeding stuffs. ICS : 65.120 ISO 20588:2019 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2591-1:2021 (1st Ed)/ISO 15592-1:2001 | 2021 | Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 1: Sampling Specifies two methods of sampling a population of fine-cut tobacco manufactured for sale for the preparation of smoking articles. 65.160 ISO 15592-1:2001 |
16 | Tshs. 25,000/= USD 25 |
| TZS 2420-5:2021/ ISO 6887-5:2020 | 2021 | Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 5: Specific rules for the preparation of milk and Specifies rules for the preparation of samples of milk and milk products and their suspensions for microbiological examination when the samples require a different preparation from the gener ICS : 07.100.30 ISO 6887-5:2020 |
11 | Tshs. 20,000/= USD 20 |
| TZS 3003:2021/ ISO 17410:2019 | 2021 | Microbiology of the food chain — Horizontal method for the enumeration of psychrotrophic microorganisms Specifies a horizontal method for the enumeration of psychrotrophic microorganisms that are able to grow and form colonies on a solid agar culture medium after aerobic incubation at 6,5 °C. ICS : 07.100.30 ISO 17410:2019 |
10 | Tshs. 15,000/= USD 15 |
| TZS 2736:2021(2nd Ed)/ISO 5079:1995 | 2021 | Textile fibres — Determination of breaking force and elongation at break of individual fibres Describes method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state. 59.060.01 ISO 5079:1995 |
6 | TSHS 15,000/= USD 15 |
| TZS 3004:2021/ ISO 19020:2017 | 2021 | Microbiology of the food chain — Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs Specifies a screening method for the detection of staphylococcal enterotoxins SEA, SEB, SECs, SED and SEE in foodstuffs. ICS :07.100.30 ISO 19020:2017 |
22 | Tshs. 30,000/= USD 30 |
| TZS 2424:2021/ ISO 15216-2:2019 | 2021 | Microbiology of the food chain — Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR — Part 2: Method for detection Specifies a method for detection of hepatitis A virus (HAV) and norovirus genogroups I (GI) and II (GII), from test samples of foodstuffs [(soft fruit, leaf, stem and bulb vegetables, bottle ICS : 07.100.30 ISO 15216-2:2019 |
40 | Tshs. 45,000/= USD 45 |
| TZS 2735:2021(1st Ed)/ISO 3060: 1974 | 2021 | Textiles — Cotton fibres — Determination of breaking tenacity of flat bundles Applicable to fibres being tested either at a nominal gauge length of zero or at a finite gauge length. It is especially intended to be used with tensile strength test instruments which have 59.060.10 ISO 3060: 1974 |
6 | TSHS 15,000/= USD 15 |
| TZS 3053:2021/ ISO 21147:2003 | 2021 | Fine-cut tobacco and smoking articles made from it — Survey and analysis of consumer-made articles Specifies the method of conducing a survey to determine nicotine-free dry particulate matter and nicotine yields from fine-cut smoking articles made by consumers. ICS : 65.160 ISO 21147:2003 |
5 | TSHS 10,000/ USD 10 |
| TZS 2934:2021/ ISO 20613:2019 | 2021 | Sensory analysis — General guidance for the application of sensory analysis in quality control Gives guidelines for the implementation of a sensory analysis programme in quality control (QC), including general elements and procedures.It is applicable to food and non-food industries.It ICS : 67.240 ISO 20613:2019 |
11 | TSHS 20,000/=USD 20 |
| TZS 3054:2021/ ISO 4389:2000 | 2021 | Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method Specifies a method for the gas chromatographic determination of pesticide residues in leaf tobacco, manufactured tobacco and tobacco products. ICS : 65.160 ISO 4389:2000 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2968:2021/ ISO 14470:2011 | 2021 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food Specifies requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food, and establishes guidelines for me ICS : 67.020 ISO 14470:2011 |
20 | TSHS 25000/=USD 25 |
| TZS 3055:2021/ ISO 20193:2019 | 2021 | Tobacco and tobacco products — Determination of the width of the strands of cut tobacco Specifies a method for the determination of the width of strands of cut tobacco. This method is only applicable on samples of strands of cut tobacco with a uniform cut width. ICS : 65.160 ISO 20193:2019 |
8 | TSHS 15,000/= USD 15 |
| TZS 2967:2021/ ISO 7002:1986 | 2021 | Agricultural food products — Layout for a standard method of sampling from a lot General rules for drafting standard methods; they cannot be used itself for samplling products. Rules for drafting individual elements and clauses, such as title, introduction, scope, field ICS : 67.040 ISO 7002:1986 |
17 | TSHS 25000/=USD 25 |
| TZS 3056:2021/ ISO 20193:2019 | 2021 | Tobacco and tobacco products — Determination of the width of the strands of cut tobacco Specifies a method for the determination of the width of strands of cut tobacco. This method is only applicable on samples of strands of cut tobacco with a uniform cut width. ICS : 65.160 ISO 20193:2019 |
8 | Tshs. 15,000/= USD 15 |
| TZS 3232:2021/ ISO 9648:1988 | 2021 | Sorghum — Determination of tannin content Consists in extraction by shaking with dimethylformamide, then after centrifuging, addition of ferric ammonium citrate and ammonia to an aliqiot part of the supernatant liquid and spectromet ICS : 67.060 ISO 9648:1988 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2971:2021/ISO /TR 22758:2020 | 2021 | Biotechnology — Biobanking — Implementation guide for ISO 20387 Provides guidance to biobanks on how to implement the quality management, management, and technical requirements of ISO 20387. It expands on aspects of ISO 20387 and provides examples for il ICS : 07.080 ISO /TR 22758:2020 |
23 | TSHS 30,000/=USD 3O |
| TZS 2972-1:2021/ISO 20688-1:2020 | 2021 | Biotechnology — Nucleic acid synthesis — Part 1: Requirements for the production and quality control of synthesized oligonucleotides Specifies minimum requirements for the production and quality control of synthesized oligonucleotides (nominally up to 250 bases).This document also describes general quality attributes for ICS : 07.080 ISO 20688-1:2020 |
28 | TSHS 35000/=USD 35 |
| TZS 2589:2021 (2 nd Ed)/ISO 20871:2018 | 2021 | Footwear — Test methods for outsoles — Abrasion resistance Specifies a method for the determinatispecifies a method for the determination of the abrasion resistance for outsoles, irrespective of the material.on of the abrasion resistance for outsole 61.060 ISO 20871:2018 |
7 | TSHS 15,000/= USD 15 |
| TZS 3241:2021/ ISO 6646:2011 | 2021 | Rice — Determination of the potential milling yield from paddy and from husked rice Specifies a laboratory method for the determination of the yield of husked rice obtained from paddy or parboiled paddy (Oryza sativa L.), and for the determination of the yield of milled hea ICS : 67.060 ISO 6646:2011 |
10 | TSHS. 15,000/= USD 15 |
| TZS 2973:2021/ ISO 20395:2019 | 2021 | Biotechnology — Requirements for evaluating the performance of quantification methods for nucleic acid target sequences — qPCR and dPCR Provides generic requirements for evaluating the performance and ensuring the quality of methods used for the quantification of specific nucleic acid sequences (targets). ICS : 07.080 ISO 20395:2019 |
50 | TSHS 55,000/=USD 55 |
| TZS 2588: 2021(1st Ed)/ISO 17707: 2005 | 2021 | Footwear — Test methods for outsoles — Flex resistance Specifies a method for determining the flex resistance of outsoles. This method is intended to assess the effect of sole materials and surface patterns on cut growth. This method is applied 61.060 ISO 17707:2005 |
8 | TSHS 15,000/= USD 15 |
| TZS 3240:2021/ ISO 6639-1:1986 | 2021 | Cereals and pulses — Determination of hidden insect infestation — Part 1: General principles Deals with sampling and methods of detremination. A table shows a summary of the principal characteristics of methods of determination, as referance method, carbon dioxide method, ninhydrin ICS : 67.060 ISO 6639-1:1986 |
2 | TSHS 10,000/ USD 10 |
| TZS 3239:2021/ ISO 6639-2:1986 | 2021 | Cereals and pulses — Determination of hidden insect infestation — Part 2: Sampling Shows general principles, apparatus, sampling times and places, pre-sampling inspection and identification of lots, sampling of bilk grain, sampling of grain in bags, preparation of laborato ICS : 67.060 ISO 6639-2:1986 |
4 | TSHS 10,000/ USD 10 |
| TZS 2974-2:2021/ ISO 20391-2:2019 | 2021 | Biotechnology — Cell counting — Part 2: Experimental design and statistical analysis to quantify counting method performance Provides a method for evaluating aspects of the quality of a cell counting measurement process for a specific cell preparation through a set of quality indicators derived from a dilution ser ICS : 07.080 ISO 20391-2:2019 |
53 | TSHS 60,000/=USD 60 |
| TZS 3228:2021/ ISO 6639-3:1986 | 2021 | Cereals and pulses — Determination of hidden insect infestation — Part 3: Reference method Consists in maintaining test samples at a controlled temperature and relative humidity such that the greatest possible proportion of the insects present in the sample when collected can deve ICS : 67.060 ISO 6639-3:1986 |
4 | TSHS 10,000/ USD 10 |
| TZS 3227:2021/ ISO 6639-4:1987 | 2021 | Cereals and pulses — Determination of hidden insect infestation — Part 4: Rapid methods Specifies five rapid methods for estimating the degree of, or detecting the presence of, hidden insect infestation in a sample of a cereal or pulse. ICS : 67.060 ISO 6639-4:1987 |
17 | Tshs. 25,000/= USD 25 |
| TZS 2974-1:2021/ ISO 20391-1:2018 | 2021 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods Defines terms related to cell counting for biotechnology. It describes counting of cells in suspension (generally cell concentration) and cells adhered to a substrate (generally area density ICS : 07.080 ISO 20391-1:2018 |
16 | TSHS 25000/=USD 25 |
| TZS 2975:2021/ ISO 20387:2018 | 2021 | Biotechnology — Biobanking — General requirements for biobanking Specifies general requirements for the competence, impartiality and consistent operation of biobanks including quality control requirements to ensure biological material and data collections ICS : 07.080 ISO 20387:2018 |
36 | TSHS 45,000/=USD 45 |
| TZS 2587:2021/ISO 17699:2003 | 2021 | Footwear — Test methods for uppers and lining — Water vapour permeability and absorption specifies two test methods for assessing, respectively, the water vapour permeability and the water vapour absorption of uppers or complete upper assembly irrespective of the material, in or 61.060 ISO 17699:2003 |
9 | TSHS 15,000/= USD 15 |
| TZS 2411-6:2021/ISO/TS 21569-6:2016 | 2021 | Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening meth Specifies a procedure for the detection of a DNA sequence of the modified cry1Ab/Ac gene and a procedure for the detection of the DNA transition sequence between the maize ubiquitin promoter ICS : 67.050 ISO/TS 21569-6:2016 |
10 | TSHS 15,000/=USD 15 |
| TZS 2411-5:2021/ISO/TS 21569-5:2016 | 2021 | Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening meth Specifies a procedure for the detection of a DNA sequence used in genetically modified (GM) plants by means of a real-time PCR (polymerase chain reaction). The method detects a 78 base pairs ICS : 67.050 ISO/TS 21569-5:2016 |
10 | TSHS 15,000/=USD 15 |
| TZS 2586:2021 (1st Ed)/ISO 20865:2002 | 2021 | Footwear — Test methods for outsoles — Compression energy Specifies a method for the determination of the compression energy of outsoles. 61.060 ISO 20865:2002 |
6 | TSHS 15,000/= USD 15 |
| TZS 2585:2021 (3rd Ed)/ISO 9092:2019 | 2021 | Nonwovens — Vocabulary Establishes a definition for the term nonwovens and provides auxiliary terminology to distinguish nonwovens from other materials. 01.040.59 ISO 9092:2019 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2903: 2021/ISO 13545: 2000 | 2021 | Lead sulfide concentrates — Determination of lead content — EDTA titration method after acid digestion Specifies a lead sulfate precipitation EDTA titrimetric method after acid decomposition for determination of the lead content of lead sulfide concentrates. 73.060.99 ISO 13545: 2000 |
17 | TSHS 25,000/= USD 25 |
| TZS 2411-4:2021/ ISO/TS 21569-4:2016 | 2021 | Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 4: Real-time PCR based screening meth Specifies a procedure for the detection of a DNA sequence of the promoter region of the nopaline synthase gene (P-nos) from Agrobacterium tumefaciens and a procedure for the detection of the ICS : 67.050 ISO/TS 21569-4:2016 |
10 | TSHS 15,000/=USD 15 |
| TZS 2584-18:2021 (1st Ed)/ISO 9073-18:2007 | 2021 | Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test Specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials. It includes instructions for the testing of wet specimens. 59.080.30 ISO 9073-18:2007 |
6 | TSHS 15,000/= USD 15 |
| TZS 2584-17:2021 (1st Ed)/ISO 9073-17:2008 | 2021 | Textiles — Test methods for nonwovens — Part 17: Determination of water penetration (spray impact) Specifies a method for measuring the resistance of fabrics to the penetration of water by impact. 59.080.30 ISO 9073-17:2008 |
6 | TSHS 15,000/= USD 15 |
| TZS 2411-3:2021/ ISO/TS 21569-3:2020 | 2021 | Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR m Describes a procedure for the detection of the DNA transition sequence between the 35S promotor (P35S) from Cauliflower mosaic virus and a modified phoshinothricin-acetyltransferase gene (pa ICS : 67.050 ISO/TS 21569-3:2020 |
14 | TSHS 20,000/=USD 20 |
| TZS 2584-16:2021 (1st Ed)/ISO 9073-16:2007 | 2021 | Textiles — Test methods for nonwovens — Part 16: Determination of resistance to penetration by water (hydrostatic pressure) Describes the hydrostatic pressure test that measures the resistance of nonwoven fabrics to the penetration of water under varied hydrostatic head pressures. 59.080.30 ISO 9073-16:2007 |
7 | TSHS 15,000/= USD 15 |
| TZS 2932;2021/ ISO 1871:2009 | 2021 | Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method Provides general guidelines for the determination of nitrogen by the Kjeldahl method. It applies to food and feed products containing nitrogenous compounds that can be directly determined by ICS : 67.050 ISO 1871:2009 |
7 | TSHS 15,000/=USD 15 |
| TZS 2584-15:2021 (1st Ed)/ISO 9073-15:2007 | 2021 | Textiles — Test methods for nonwovens — Part 15: Determination of air permeability Specifies a method of measuring the flow of air passing perpendicularly through a given area of a fabric. 59.080.30 ISO 9073-15:2007 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2921-1:2021/ ISO 8391-1:1986 | 2021 | Ceramic cookware in contact with food — Release of lead and cadmium — Part 1: Method of test Applies to ceramic cookware, intended to be used for the preparation of foods by heating. The determination is carried out by extraction of the cookware surfaces with hot acetic acid solutio ICS : 67.250 ISO 8391-1:1986 |
4 | TSHS 10,000/=USD 10 |
| TZS 2584-14:2021 (1st Ed)/ISO 9073-14:2006 | 2021 | Textiles — Test methods for nonwovens — Part 14: Coverstock wetback Specifies a test method to examine the ability of diaper coverstock to resist the transport back onto the skin of a liquid which has already penetrated the coverstock. This test corresponds 59.080.30 ISO 9073-14:200 |
9 | TSHS 15,000/= USD 15 |
| TZS 2584-13:2021 (1st Ed)/ISO 9073-13:2006 | 2021 | Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time Specifies a test method for measuring the strike-through time (STT) for each of three subsequent doses of liquid (simulated urine) applied to the surface of a test piece of nonwoven coversto 59.080.30 ISO 9073-13:2006 |
7 | TSHS 15,000/= USD 15 |
| TZS 1630-2:2021/ ISO 14502-2:2005 | 2021 | Determination of substances characteristic of green and black tea — Part 2: Content of catechins in green tea — Method using high-performance liquid chromatography Specifies a high-performance liquid chromatographic (HPLC) method for the determination of the total catechin content of tea from the summation of the individual catechins. It is applicable ICS : 67.140.10 ISO 14502-2:2005 |
23 | Tshs. 30,000/= USD 30 |
| TZS 2884:2021/ ISO 22253:2019 | 2021 | Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method Specifies a method for the gas-chromatographic determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime. ICS : 65.160 ISO 22253:2019 |
7 | TSHS 15,000/=USD 15 |
| TZS 2584-12:2021 (1st Ed)/ISO 9073-12:2002 | 2021 | Textiles — Test methods for nonwovens — Part 12: Demand absorbency Describes a method for the evaluation of the absorbency of fabrics when one side is in contact with a liquid and the fabric is under mechanical pressure. 59.080.30 ISO 9073-12:2002 |
12 | Tshs. 20,000/= USD 20 |
| TZS 2885:2021/ ISO 21766:2018 | 2021 | Tobacco and tobacco products — Determination of tobacco-specific nitrosamines in tobacco products — Method using LC-MS/MS Specifies a method for the quantification of four tobacco specific nitrosamines (TSNAs) in tobacco and the following tobacco products: cigarettes, cigars and smokeless tobacco products using ICS : 65.160 ISO 21766:2018 |
16 | TSHS 25000/= USD 25 |
| TZS 2904: 2021/ISO 11441: 1995 | 2021 | Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate Specifies a lead sulfate precipitation EDTA titrimetric method for the determination of lead content in lead sulfide concentrates. Applicable to all lead sulfide concentrates with lead conte 73.060.99 ISO 11441: 1995 |
15 | TSHS. 20,000/USD 20 |
| TZS 2874:2021/ ISO 20370:2009 | 2021 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of acetate content Specifies a method for the determination of the acetate content of material used to produce wrappings for cigarette filters, cigarettes and other tobacco products. ICS : 65.160 ISO 20370:2009 |
7 | TSHS 15,000/=USD 15 |
| TZS 2584-11:2021 (1st Ed)/ISO 9073-11:2002 | 2021 | Textiles — Test methods for nonwovens — Part 11: Run-off Describes test methods for measuring the quantity of test liquid (simulated urine) which runs down a nonwoven test piece when a specified mass of test liquid is poured on to the nonwoven tes 59.080.30 ISO 9073-10:2003 |
10 | TSHS 15,000/= USD 15 |
| TZS 2886;2021/ ISO 20369:2009 | 2021 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of citrate content Specifies a method for the determination of the citrate content of material used to produce wrappings for cigarette filters, cigarettes and other tobacco products. ICS : 65.160 ISO 20369:2009 |
7 | TSHS 15,000/=USD 15 |
| TZS 1630-1:2021/ ISO 14502-1:2005 | 2021 | Determination of substances characteristic of green and black tea — Part 1: Content of total polyphenols in tea — Colorimetric method using Folin-Ciocalteu reagent Specifies a method for the determination of the total polyphenol content of leaf teas and instant teas by a colorimetric assay using Folin-Ciocalteu phenol reagent. It is applicable to both ICS : 67.140.10 ISO 14502-1:2005 |
10 | TSHS 15,000/= USD 15 |
| TZS 2584-10:2021 (1st Ed)/ISO 9073-10:2003 | 2021 | Textiles — Test methods for nonwovens — Part 10: Lint and other particles generation in the dry state Specifies a test method for measuring the linting of nonwovens in the dry state. It can also be applied to other textile materials. 59.080.30 /ISO 9073-10:2003 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2833:2021/ ISO 6322-3:1989 | 2021 | Storage of cereals and pulses — Part 3: Control of attack by pests Gives guidance in means of controlling attack by vertebrate and invertebrate pests. It shows onset of infestation, factors affecting insect and mite development, heating of grain caused by i ICS : 67.060 ISO 6322-3:1989 |
6 | TSHS 15,000/=USD 15 |
| TZS 2584-9:2021 (2nd Ed)/ISO 9073-9:2008 | 2021 | Textiles — Test methods for nonwovens — Part 9: Determination of drapability including drape coefficient Specifies a test method that is used to determine the drape coefficient of fabrics (nonwovens, wovens and knitted fabrics). 59.080.30 ISO 9073-9:2008 |
12 | Tshs. 20,000/= USD 20 |
| TZS 2584-8:2021 (1st Ed)/ISO 9073-8:1995 | 2021 | Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine) Provides a method for measuring the time of liquid (simulated urine) strike-through for nonwovens. Does not simulate in-use conditions for finished products. 59.080.30 ISO 9073-8:1995 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2832:2021/ISO 6322-2:2000 | 2021 | Storage of cereals and pulses — Part 2: Practical recommendations Gives guidance on the choice of a method of storage of cereals and pulses, and on the practical recommendations for good storage, according to the method chosen. Other aspects of the storage ICS : 67.060 ISO 6322-2:2000 |
9 | TSHS 15,000/=USD 15 |
| TZS 2584-7:2021 (1st Ed)/ISO 9073-7:1995 | 2021 | Textiles — Test methods for nonwovens — Part 7: Determination of bending length Specifies a method for the determination of the bending length of nonwovens. Gives an equation for calculating the flexural rigity of the fabric from the bending length 59.080.30 ISO 9073-7:1995 |
5 | TSHS 15,000/= USD 15 |
| TZS 2831:2021/ISO 6322-1:1996 | 2021 | Storage of cereals and pulses — Part 1: General recommendations for the keeping of cereals Gives general guidance of keeping cereals. Other aspects of the storage of cereals and pulses are dealt with ICS : 67.060 ISO 6322-1:1996 |
20 | TSHS 25000/=USD 25 |
| TZS 2584-6:2021 (1st Ed)/ISO 9073-6:2000 | 2021 | Textiles — Test methods for nonwovens — Part 6: Absorption Describes methods for the evaluation of some aspects of the behavior of nonwoven fabrics 59.080.30 ISO 9073-6:2000 |
9 | TSHS 15,000/= USD 15 |
| TZS 2830:2021/ISO 5527:2015 | 2021 | Cereals — Vocabulary Defines terms relating to cereals. ICS : 67.060 ISO 5527:2015 |
28 | TSHS 35000/=USD 35 |
| TZS 2584-5:2021 (1st Ed)/ISO 9073-5:2008 | 2021 | Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure) Specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter. ISO 9073-5:2008 |
7 | TSHS 15,000/= USD 15 |
| TZS 2829:2021/ISO 5526:2013 | 2021 | Cereals, pulses and other food grains — Nomenclature lists the botanical names of the main species of: a) cereals (Clause 3); b) pulses (Clause 4); c) other food grains (Clause 5).also lists the stabilized plant names of the International Seed ICS : 67.060 ISO 5526:2013 |
32 | TSHS 40,000/=USD 40 |
| TZS 2584-4:2021 (2nd Ed)/ISO 9073-4:1997 | 2021 | Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance Specifies a method for the determination of tear resistance of nonwovens by the trapezoid method. 59.080.30 ISO 9073-4:1997 |
3 | Tshs. 10,000/= USD 10 |
| TZS 163:2021/ISO 874:1980 | 2021 | Fresh fruits and vegetables — Sampling The method is intended with a view to determining the quality or particular characteristics of the goods. It describes the preparation of a lot, an increment, a bulk sample, a reduced sample ICS : 67.080.01 ISO 874:1980 |
3 | TSHS 10,000/=USD 10 |
| TZS 2584-3:2021(1st Ed)/ISO 9073-3:1989 | 2021 | Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation Specifies a method for the determination of the tensile properties of nonwovens by the cut strip method. 59.080.30 9073-3:1989 |
2 | Tshs. 10,000/= USD 10 |
| TZS 3005:2021/ ISO 22483:2020 | 2021 | Tourism and related services — Hotels — Service requirements Establishes quality requirements and recommendations for hotels regarding staff, service, events, entertainment activities, safety and security, maintenance, cleanliness, supply management a ISO 22483:2020 |
29 | Tshs. 35,000/= USD 35 |
| TZS 2842:2021/ISO 936:1998 | 2021 | Meat and meat products — Determination of total ash Specifies a method for the determination of the total ash from all kinds of meat and meat products, including poultry. ICS : 67.120.10 ISO 936:1998 |
6 | TSHS 15,000/=USD 15 |
| TZS 3007:2021/ ISO 14782:2021 | 2021 | Plastics — Determination of haze for transparent materials Specifies a method for the measurement of haze, an optical property resulting from wide-angle scattering of light, in transparent and substantially colourless plastics. This method is applic ISO 14782:2021 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2584-2:2021/ISO 9073-2:1995 | 2021 | Textiles — Test methods for nonwovens — Part 2: Determination of thickness Specifies methods for the determination of the thickness, when under a specific pressure, of normal and bulky nonwoven textiles. 59.080.30 9073-2:1995 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3008:2021/ ISO 7765-1:2007 | 2021 | Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods Specifies methods for the determination of the energy, that causes plastics films and sheet less than 1 mm in thickness to fail under specified conditions of impact of a free falling dart fr ICS : 83.140.10 ISO 7765-1:2007 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2841:2021/ISO 2917:1999 | 2021 | Meat and meat products — Measurement of pH — Reference method Specifies the reference method for measuring the pH of all kinds of meat and meat.products, including poultry.The method is applicable to products which may be homogenized and also to non-de ICS : 67.120.10 ISO 2917:1999 |
6 | TSHS 15,000/=USD 15 |
| TZS 3009:2021/ ISO 527-3:2018 | 2021 | Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets Specifies the conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based upon the general principles given in ISO 527-1. ICS : 83.140.10 ISO 527-3:2018 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2584-1:2021/ISO 9073-1:1989 | 2021 | Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area Specifies a method for the determination of mass per unit area of nonwovens. 59.080.30 9073-1:1989 |
2 | Tshs. 10,000/= USD 10 |
| TZS 3010:2021/ ISO 7086-1:2019 | 2021 | Glass hollowware in contact with food — Release of lead and cadmium — Part 1: Test method Specifies a test method for the release of lead and cadmium from glass hollowware that is intended to be used in contact with food. ICS : 67.250 ISO 7086-1:2019 |
24 | Tshs. 30,000/= USD 30 |
| TZS 3011:2021/ ISO 6486-1:2019 | 2021 | Ceramic ware, glass ceramic ware and glass dinnerware in contact with food — Release of lead and cadmium — Part 1: Test method Specifies a test method for the release of lead and cadmium from ceramic ware, glass ceramic ware and glass dinnerware intended to be used in contact with food, but excluding vitreous and po ICS : 67.250 ISO 6486-1:2019 |
26 | Tshs. 35,000/= USD 35 |
| TZS 2840:2021/ISO 3974:1977 | 2021 | Definitions of living animals for slaughter — Ovines Gives definitions of terms, such as lamb, young ovine, adult ovine in English and French. An annex shows two sketsches of dentition of ovines. ICS : 65.020.30 ISO 3974:1977 |
2 | TSHS 10,000/=USD 10 |
| TZS 448-2-23:2021/IEC 60335-2-23:2016+AMD1:2019 | 2021 | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care Deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for household and similar purposes, their rated voltage being not more than 250 V 13.120 |
46 | |
| TZS 448-2-21:2021/IEC 60335-2-21:2018 | 2021 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters Deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 2 91.140.65 |
29 | |
| TZS 27-1-1:2021/IEC 62680-1-1:2015 | 2021 | Universal serial bus interfaces for data and power - Part 1-1: Common components - USB Battery Charging Specification, Revision 1.2 Contains specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in excess of the USB 2.0 specification for charging and/or 29.200 |
68 | |
| TZS 2807:2021/IEC 61109:2008 | 2021 | Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria Applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres - usually glass - in a resin-based matrix, a housing (o 29.080.10 |
29 | |
| TZS 2806-1:2021/IEC 60282-1:2009+AMD1:2014 | 2021 | High-voltage fuses - Part 1: Current-limiting fuses Applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. Th 29.120.50 |
170 | |
| TZS 2805-1:2021/IEC 60383-1:1993 | 2021 | Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria Applies to insulators of ceramic material or glass for use on a.c. overhead power lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. Also applies to i 29.080.10 |
56 | |
| TZS 2743-5-3:2021/IEC 62040-5-3:2016 | 2021 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements Establishes the performance and test requirements applied to movable, stationary and fixed electronic DC uninterruptible power systems (DC UPS) that - are supplied from an AC voltage source 29.200 |
67 | |
| TZS 2743-4:2021/IEC 62040-4:2013 | 2021 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting Specifies the process and requirements to declare the environmental aspects concerning uninterruptible power systems (UPS), with the goal of promoting reduction of any adverse environmental 13.020.99 |
17 | |
| TZS 2743-3:2012/IEC 62040-3:2011 | 2021 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements applies to movable, stationary and fixed electronic uninterruptible power systems (UPS) that deliver single or three phase fixed frequency a.c. output voltage not exceeding 1 000 V a.c. and 29.200 |
107 | |
| TZS 2743-1:2021/IEC 62040-1:2017 | 2021 | Uninterruptible power systems (UPS) - Part 1: Safety requirements applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a re 29.200 |
147 | |
| TZS 2739:2021/IEC 61195:2014 | 2021 | Double-capped fluorescent lamps - Safety specifications specifies the safety requirements fordouble-capped fluorescent lamps for general lighting purposes of all groups having Fa6, Fa8, G5, G13 and R17d caps. Also specifies the method a manufactu 29.140.30 |
52 | |
| TZS 1599-3:2021/IEC 61960-3:2017 | 2021 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications.The objective of this docume 29.220.99 |
23 | |
| TZS 2611-1:2021/IEC 60034-1:2017 | 2021 | Rotating electrical machines - Part 1: Rating and performance Applicable to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349 29.160.01 |
74 | |
| TZS 1223-2:2021/IEC 60947-2:2016+AMD1:2019 | 2021 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains ad 29.130.20 |
647 | |
| TZS 1221-3:2021/IEC 61439-3:2012 | 2021 | Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) Defines the specific requirements for distribution boards intended to be operated by ordinary persons (DBO 29.130.20 |
20 | |
| TZS 1221-2:2021/IEC 61439-2:2011 | 2021 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies Defines the specific requirements of power switchgear and control gear assemblies (PSC-ASSEMBLIES) 29.130.20 |
23 | |
| TZS 1222:2021/IEC 60968:2015 | 2021 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements Specifies the safety and interchangeability requirements, together with the test methods and conditions required to show compliance of tubular fluorescent lamps with integrated means for con 29.140.30 |
30 | |
| TZS 1221-1:2021/IEC 61439-1:2011 | 2021 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules Lays down the definitions and states the service conditions, construction requirements, technical characteristics and verification requirements for low-voltage switchgear and control gear as 29.130.20 |
142 | |
| TZS 2729:2021/IEC 62852:2014 | 2021 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests Applies to connectors for use in the d.c. circuits of photovoltaic systems according to class II of IEC 61140:2001 with rated voltages up to 1 500 V d.c. and rated currents up to 125 A per c 27.160 |
41 | |
| TZS 2727:2021/IEC 62727:2012 | 2021 | Photovoltaic systems - Specification for solar trackers Provides guidelines for the parameters to be specified for solar trackers for photovoltaic systems and provides recommendations for measurement techniques. The purpose of this test specifica 27.160 |
15 | |
| TZS 2725-3-12:2021/IEC 60794-3-12:12 | 2021 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling Contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. is a detailed specification for duct and directly 33.180.10 |
9 | |
| TZS 2725-1-1:2021/IEC 60794-1-1:2015 | 2021 | Optical fibre cables - Part 1-1: Generic specification - General contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.applies to optical fibre cables for use with commun 33.180.10 |
24 | |
| TZS 3178-2:2021/IEC 62586-2:2017 | 2021 | Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements Specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems 17.220.20 |
145 | |
| TZS 3178-1:2021/IEC 62586-1:2017 | 2021 | Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) Specifies product and performance requirements for instruments whose functions include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whos 17.220.20 |
36 | |
| TZS 3204-1:2021/IEC 60664-1:2020 | 2021 | Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests Deals with insulation coordination for equipment having a rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems. 29.080.30 |
84 | |
| TZS 3203:2021/IEC 60376:2018 | 2021 | Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment Defines the quality for technical grade sulphur hexafluoride (SF6) and complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in electrical equipment. Detection t 29.040.20 |
19 | |
| TZS 3202-2:2021/IEC 60137:2017 | 2021 | Insulated Bushings for Alternating Voltages Above 1000V Specifies the characteristics and tests for insulated bushings. 29.080.20 - Bushings |
62 | |
| TZS 3187-2:2021/IEC 61730-2:2016 | 2021 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing Provides the testing sequence intended to verify the safety of PV modules whose construction has been assessed by IEC 61730-1. 27.160 |
57 | |
| TZS 3187 -1:2021/IEC 61730-1:2016 | 2021 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction Specifies and describes the fundamental construction requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation. Specific topics are provided to 27.160 |
53 | |
| TZS 3201-5-54:2021/IEC 60364-5-54:2011 | 2021 | Low- Voltage Electrical Installations-Part 5-54: Selection and erection of electrical equipment Earthing arrangements and protective conductors Addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety of the electrical installation 29.020 |
41 | |
| TZS 3188-9-8:2021/IEC TS 62257-9-8:2020 | 2021 | Renewable energy and hybrid systems for rural electrification - Part 9-8: Integrated systems - Requirements for stand-alone renewable energy products with power ratings less than or equal to provides baseline requirements for quality, durability and truth in advertising to protect consumers of off-grid renewable energy products. Evaluation of these requirements is based on tests 27.160 |
74 | |
| TZS 3185 :2021/IEC 62688:2017 | 2021 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification Describes the fundamental construction and testing requirements for Concentrator Photovoltaic (CPV) modules and assemblies in order to provide safe electrical and mechanical operation during 27.160 |
79 | |
| TZS 3252:2021/EAS 1027:2021 | 2021 | Bacon — Specification Specifies requirements, sampling and test methods for bacon ICS 67.160.10 |
5 | Tshs. 10,000/= USD 10 |
| TZS 3195:2021(2nd Ed) /ISO 15384:2018 | 2021 | Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing Specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn dur ICS : 13.340.10 ISO 15384:2018 |
14 | Tshs. 20,000/= USD 20 |
| TZS 3194:2021( 1st Ed)/ISO 21942:2019 | 2021 | Station uniform for firefighters Sets out minimum performance requirements for station uniforms for firefighters that are provided by agencies to be worn under primary protective garments compliant with the relevant standar ICS : 13.340.10 ISO 21942:2019 |
11 | Tshs. 20,000/= USD 20 |
| TZS 3153-6:2021(1st Ed)/ISO 12402-6:2006 | 2021 | Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods Specifies the safety requirements and additional test methods for special purpose lifejackets and buoyancy aids (referred to as special purpose devices within ISO 12402-6:2006) in combinatio ICS : 13.340.70 ISO 12402-6:2006 |
17 | Tshs. 25,000/= USD 25 |
| TZS 3153-5:2021(1st Ed)/ISO 12402-5:2006 | 2021 | Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements It applies to buoyancy aids used by adults or children. ISO 12402-5:2006 is not applicable to one-piece suits. ICS : 13.340.70 ISO 12402-5:2006 |
15 | Tshs. 20,000/= USD 20 |
| TZS 3153-4:2021(1st Ed)/ISO 12402-4:2006 | 2021 | Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements Specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children. ICS : 13.340.70 ISO 12402-4:2006 |
16 | Tshs. 25,000/= USD 25 |
| TZS 3153-3:2021(1st Ed)/ISO 12402-3:2006 | 2021 | Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements Specifies the safety requirements for lifejackets, performance level 150. It applies to lifejackets used by adults or children. ICS : 13.340.70 ISO 12402-3:2006 |
16 | Tshs. 25,000/= USD 25 |
| TZS 3153-2:2021(1st Ed)/ISO 12402-2:2006 | 2021 | Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements Specifies the safety requirements for lifejackets, performance level 275. It applies to lifejackets for adults and children for offshore use under extreme conditions ICS : 13.340.70 ISO 12402-2:2006 |
16 | Tshs. 25,000/= USD 25 |
| TZS 3209:2021(1st Ed)/ISO 18264:2016 | 2021 | Textile slings — Lifting slings for general purpose lifting operations made from fibre ropes — High modulus polyethylene (HMPE) Deals with the technical requirements to minimize the hazards listed in Clause 4 which can arise during the use of fibre rope slings when carried out in accordance with the instructions and ICS : 59.080.01 ISO 18264:2016 |
35 | Tshs. 40,000/= USD 40 |
| TZS 3033-1:2021(1st Ed)/ISO 14824-1:2012 | 2021 | Grout for prestressing tendons — Part 1: Basic requirements Covers the materials that may be used in the manufacture of cement grouts and the required properties and composition of the grout. It is applicable to grouting of tendons in all types of st ICS : 91.100.30 ISO 14824-1:2012 |
7 | TSHS 15,000/= USD 15 |
| TZS 3030-2:2021( 1st Ed)/ ISO 22965-2:2007 | 2021 | Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete Specifies properties of the constituent materials, the production of concrete and the compliance system of concrete. ICS : 91.100.30 ISO 22965-2:2007 |
41 | Tshs. 50,000/= USD 50 |
| TZS 3208-1:2021/ISO 29463-1:2017 | 2021 | High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking Establishes a classification of filters based on their performance, as determined in accordance with ISO 29463-3, ISO 29463-4 and ISO 29463-5. It also provides an overview of the test proced ICS : 91.140.30 ISO 29463-1:2017 |
16 | TSHS 25,000/= USD 25 |
| TZS 1640:2021 ( 1st Ed)/ISO 3949:2020 | 2021 | Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification Specifies requirements for three types of textile-reinforced thermoplastics hoses and hose assemblies of nominal size from 3,2 to 25. Each type is divided into two classes dependent on elect ICS : 23.100.40 ISO 3949:2020 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3157:2021/ISO 3633:2002 | 2021 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U) Specifies the requirements for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system i ICS : 23.040.20 ISO 3633:2002 |
29 | TSHS 35000/= USD 35 |
| TZS 3155:2021/ISO 16438:2012 | 2021 | Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods Specifies requirements and test methods for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance ICS : 65.060.35 ISO 16438:2012 |
5 | TSHS 10,000/=USD 10 |
| TZS 174:2021/ ISO 4032:2012 | 2021 | Hexagon regular nuts (style 1) — Product grades A and B Specifies the characteristics of hexagon regular nuts (style 1), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and pr ICS : 21.060.20 ISO 4032:2012 |
6 | TSHS 15,000/= USD 15 |
| TZS 172:2021/ ISO 4014:2011 | 2021 | Hexagon head bolts — Product grades A and B Specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or ICS : 21.060.10 ISO 4014:2011 |
14 | TSHS 20,000/=USD 20 |
| TZS 3083:2021/ISO 525:2013 | 2021 | Bonded abrasive products — General requirements Specifies: the ISO type number and shape; dimensional symbols; standard profiles; requirements for dimensions, limit deviations and tolerances as well as permissible unbalance; the specif ICS : 25.100.70 ISO 525:2013 |
13 | TSHS 20,000/=USD 20 |
| TZS 3082:2021/ISO 10684:2004 | 2021 | Fasteners — Hot dip galvanized coatings Specifies material, process, dimensional and some performance requirements for hot dip spun galvanized coatings applied to coarse threaded steel fasteners from M8 up to and including M64 and ICS : 21.060.01 ISO 10684:2004 |
20 | TSHS 25000/= USD 25 |
| TZS 3177-3:2021/ISO 5838-3:1993 | 2021 | Implants for surgery — Skeletal pins and wires — Part 3: Kirschner skeletal wires Specifies the characteristics (dimensions, ends, marking and packaging) of Kirschner wires. Material and mechanical requirements are covered by ISO 5838-1. ICS : 11.040.40 ISO 5838-3:1993 |
4 | TSHS 10,000/=USD 10 |
| TZS 3177-2:2021/ISO 5838-2:1991 | 2021 | Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions Specifies the dimensions. Material and mechanical requirements are covered by ISO 5838-1. Dimensions shall be according to figure 1 to figure 5 and table 1 to table 3. The ends, form A - pla ICS : 11.040.40 ISO 5838-2:1991 |
2 | TSHS 10,000/=USD 10 |
| TZS 3177-1:2021/ISO 5838-1:2013 | 2021 | Implants for surgery — Metallic skeletal pins and wires — Part 1: General requirements specifies general requirements for metallic skeletal pins and wires for use in bone surgery, excluding wires for binding and twisting. ICS : 11.040.40 ISO 5838-1:2013 |
3 | TSHS 10,000/=USD 10 |
| TZS 3090:2021/ ISO 385:2005 | 2021 | Laboratory glassware — Burettes Provides metrological and construction requirements for an internationally acceptable series of burettes, suitable for general laboratory purposes. ICS : 17.060 ISO 385:2005 |
12 | TSHS 20,000/=USD 20 |
| TZS 3091:2021/ISO 4803:1978 | 2021 | Laboratory glassware — Borosilicate glass tubing Specify material including its hydrolytic resistance and thermal coefficient of expansion. The range of sizes and tolerance and external diameters and well thickness are tabled and described ICS : 71.040.20 ISO 4803:1978 |
2 | TSHS 10,000/=USD 10 |
| TZS 59:2021/ISO 3696:1987 | 2021 | Water for analytical laboratory use — Specification and test methods Specifies the requirements for three grades for the analysis of inorganic chemicals. Not applicable to organic trace analysis, analysis of surface-active agents and biological or medical ana ICS : 71.040.30 ISO 3696:1987 |
5 | TSHS 10,000/=USD 10 |
| TZS 2346-8:2021/ISO 14520-8:2019 | 2021 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specifications, usage and safety ICS : 13.220.10 ISO 14520-8:2019 |
9 | TSHS 15,000/=USD 15 |
| TZS 1305:2021/ISO 7010:2019 | 2021 | Graphical symbols — Safety colours and safety signs — Registered safety signs prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour of each safety sign are according ICS : 01.080.10 ISO 7010:2019 |
298 | |
| TZS 2636:2021/ISO 16003:2017 | 2021 | Fire resistance tests — Door and shutter assemblies — Part 1: General requirements used in conjunction with ISO 834-1, specifies a method for determining the fire resistance of door and shutter assemblies designed primarily for installation within openings incorporated in ICS : 13.220.50 ISO 16003:2017 |
52 | TSHS 60,000/=USD 60 |
| TZS 2631-1:2021/ISO 17225-1:2014 | 2021 | Solid biofuels — Fuel specifications and classes — Part 1: General requirements determines the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from a) forestry and arboriculture; b) agriculture and horticulture; and ICS : 27.190 ISO 17225-1:2014 |
56 | TSHS 65,000/=USD 65 |
| TZS 3236:2021/EAS 1025:2021 | 2021 | Monitoring and sampling of premixes and fortified foods — Guidelines Provides the guidelines for monitoring, sampling and documentation of nutrient premixes and fortified foods. This standard is applicable to premixes, fortified flours, edible salt, sugar, ICS 67.020 |
9 | TSHS 15,000/= USD 15 |
| TZS 2630-1:2021/ISO 9606-1:2016 | 2021 | Qualification testing of welders — Fusion welding — Part 1: Steels Specifies the requirements for qualification testing of welders for fusion welding of steels.It provides a set of technical rules for a systematic qualification test of the welder, and enabl ICS : 25.160.01 ISO 9606-1:2016 |
33 | TSHS 40,000/=USD 40 |
| TZS 3235:2021/EAS 1024:2021 | 2021 | Fortified composite flour — Specification Specifies requirements, sampling and test methods for fortified composite flour intended for human consumption ICS 67.060 |
8 | TSHS 15,000/= USD 15 |
| TZS 1971-4:2021/ISO 7240-4:2017 | 2021 | Fire detection and alarm systems — Part 4: Power supply equipment Specifies requirements, test methods and performance criteria for power supply equipment (PSE) for use in fire detection and alarm systems installed in buildings.For the testing of other typ ICS : 13.220.20 /ISO 7240-4:2017 |
25 | TSHS 30,000/=USD 30 |
| TZS 3251:2021/EAS 1028:2021 | 2021 | Ham — Specification Specifies requirements, sampling and test methods for ham. It applies to the product that is cured and may be smoked or cooked, spiced and/or flavoured ICS 67.100.10 |
5 | Tshs. 15,000/= USD 15 |
| TZS 3250:2021/EAS 1029:2021 | 2021 | Rabbit meat (carcass and cuts) — Specification Specifies the requirements, sampling and test methods for rabbit meat (carcass and cuts) intended for human consumption ICS 67.100.10 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2724-5:2021/ISO/IEC 11801-5:2017 | 2021 | Information technology — Generic cabling for customer premises — Part 5: Data centres Specifies generic cabling within and to the computer room spaces of data centre premises, or computer room spaces within other types of building. Additionally those premises can include offi ICS : 35.200 ISO/IEC 11801-5:2017 |
52 | TSHS 60,000/=USD 60 |
| TZS 2724-3:2021/ISO/IEC 11801-3:2017(E) | 2021 | Information technology — Generic cabling for customer premises — Part 3: Industrial premises Specifies generic cabling, which is critical for providing robust services to the automation islands in industrial premises, or industrial spaces within other types of building. ICS : 35.200 ISO/IEC 11801-3:2017(E) |
34 | TSHS 40,000/=USD 40 |
| TZS 2724-2:2021/ ISO/IEC 11801-2:2017(E) | 2021 | Information technology — Generic cabling for customer premises — Part 2: Office premises Specifies generic cabling within and between the buildings of office premises, or office spaces within other types of building. ICS : 35.200 ISO/IEC 11801-2:2017(E) |
29 | TSHS 35,000/=USD 35 |
| TZS 3253:2021/EAS 1026:2021 | 2021 | Minced meat — Specification Specifies requirements, sampling and test methods for minced meat intended for human consumption. ICS 67.100.10 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2992:2021/ISO 22764:2020 | 2021 | Jewellery and precious metals — Fineness of solders used with precious metal jewellery alloys Specifies the precious metal content in solders suitable for use in the production of jewellery made of precious metal alloys. ICS : 39.060 ISO 22764:2020 |
3 | TSHS 10,000/=USD 10 |
| TZS 2991:2021/ISO 24018:2020 | 2021 | Jewellery and precious metals — Specifications for 1 kilogram gold bar Specifies the requirements, test methods, inspection, marking, packaging, transportation, storage, quality certificate and the order (or contract) information of one kilogram gold bars ICS : 39.060 ISO 24018:2020 |
4 | TSHS 10,000/=USD 10 |
| TZS 2896:2021/ISO 3156:1976 | 2021 | Stranded wire ropes for mine hoisting — Impregnating compounds, lubricants and service dressings — Characteristics and tests Specifies the nature and properties of impregnating compounds and lubricants together with the corresponding test methods. Annex A tabulates suggested qualification and quality control tests ICS : 73.100.40 ISO 3156:1976 |
4 | TSHS 10,000/=USD 10 |
| TZS 2895:2021/ISO 3155:1976 | 2021 | Stranded wire ropes for mine hoisting — Fibre components — Characteristics and tests Specifies the nature and properties of the components together with the corresponding test methods. Describes the determination of water-soluble acids, the salt content, and the extractable ICS : 73.100.40 ISO 3155:1976 |
2 | TSHS 10,000/=USD 10 |
| TZS 2894:2021/ISO 3154:1988 | 2021 | Stranded wire ropes for mine hoisting — Technical delivery requirements Specifies those properties of ropes and of their component parts which form a basis for acceptance. Does not apply to full-lock coil ropes, balance ropes and flat ropes used in mines. ICS : 73.100.40 ISO 3154:1988 |
11 | TSHS 20,000/=USD 20 |
| TZS 2853:2021/ ISO 18323:2015 | 2021 | Jewellery — Consumer confidence in the diamond industry Specifies a set of permitted descriptors for the diamond industry and is specifically designed to be understood by the consumer. The Standard also includes a series of definitions which aim ICS : 39.060 ISO18323:2015 |
7 | TSHS 15,000/=USD 15 |
| TZS 2857:2021/ISO 19225:2017 | 2021 | Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems Specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer lo ICS : 73.100.30 ISO 19225:2017 |
26 | TSHS 35000/=USD 35 |
| TZS 2856:2021/ISO 19224:2014 | 2021 | Continuous surface miners (CSM) — Safety requirements Deals with safety requirements for continuous surface miners (CSM). It specifies common requirements for the design and construction of CSM to protect workers from accidents and health hazar ICS : 73.100.30 ISO 19224:2014 |
15 | TSHS 20,000/=USD 20 |
| TZS 1200: 2021/ EAS 1011:2021 | 2021 | Cheddar cheese — Specification Specifies the requirements, sampling and test methods for cheddar cheese intended for direct consumption or for further processing ICS 67.100.20 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2859-2:2021/ISO 18758-2:2018 | 2021 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements Specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations: a) blast hole drilling; b) rock reinforcement; ICS : 53.100 ISO 18758-2:2018 |
57 | TSHS 65,000/=USD 65 |
| TZS 2858:2021/ISO 19296:2018 | 2021 | Mining — Mobile machines working underground — Machine safety Specifies the safety requirements for self-propelled mobile machines used in underground mining, as defined in 3.1.deals with hazards, hazardous situations and hazardous events (see Annex B) ICS : 13.110 /ISO 19296:2018 |
43 | TSHS 50,000/=USD 50 |
| TZS 993-3:2021/ISO 7886-3:2020 | 2021 | Sterile hypodermic syringes for single use — Part 3: Auto-disabled syringes for fixed-dose immunization Specifies the properties and performance of sterile single-use hypodermic syringes with an auto-disable syringe feature intended to deliver a fixed dose of vaccine immediately after filling. ICS : 11.040.25 ISO 7886-3:2020 |
15 | TSHS 20,000/=USD 20 |
| TZS 1968-13:2021/ISO 10993-13:2010 | 2021 | Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices Provides general requirements for the design of tests in a simulated environment for identifying and quantifying degradation products from finished polymeric medical devices ready for clinic ICS : 11.100.20 ISO 10993-13:2010 |
14 | TSHS 20,000/=USD 20 |
| TZS 1968-7:2021/ISO 10993-7:2008 | 2021 | Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals Specifies allowable limits for residual ethylene oxide (EO) and ethylene chlorohydrin (ECH) in individual EO-sterilized medical devices, procedures for the measurement of EO and ECH, and met ICS : 11.100.20 ISO 10993-7:2008 |
86 | TSHS 95,000/=USD 95 |
| TZS 3234:2021/EAS 1023:2021 | 2021 | Food fortification premix and fortificants — Specification Specifies the requirements, sampling and test methods for food fortification premix and fortificants intended for use in wheat flour, maize flour, composite flour, blended flour, sugar, salt ICS 67.020 |
6 | TSHS 15,000/= USD 15 |
| TZS 187-2: 2021 (3rd Ed) EAS 4-2:2021 | 2021 | Infant formula — Specification — Part 2: Formula for special medical purposes Specifies the requirements, sampling and test methods for infant formula in liquid or powdered form intended for use, where necessary, as a substitute for breast milk in meeting the normal n ICS 67.230 © EAC |
9 | Tshs. 15,000/= USD 15 |
| TZS 3075:2021/EAS 130:2020 | 2021 | Green coffee beans — Specification Specifies requirements, sampling and test methods for green coffee beans. This standard applies to both Arabica (Coffee arabica L.) and Robusta (Coffee canephora) coffee. ICS 67.140.20 |
4 | TSHS 10,000/ USD 10 |
| TZS 3098:2021/EAS 992:2020 | 2021 | Beeswax — Specification Specifies requirements, sampling and test methods for beeswax intended for use in the food industry. ICS 67.180.10 |
10 | TSHS 15,000/= USD 15 |
| TZS 3084:2021/EAS 990:2020 | 2021 | Bee propolis — Specification Specifies the requirements, sampling and test methods for bee propolis intended for human consumption. ICS 67.180.10 |
7 | TSHS 15,000/= USD 15 |
| TZS 279: 2021 (3rd Ed) EAS 96:2018 | 2021 | Sanitary towels — Specification— Part 1: Disposable Specifies requirements, sampling, and test methods for disposable sanitary towels (also known as sanitary pads/sanitary napkins ICS 59.080.30 |
20 | Tshs. 25,000/= USD 25 |
| TZS 3001: 2021/ EAS 970:2020 | 2021 | Fishing gill nets — Specification Specifies the requirements and test methods for fishing gill nets. ICS: 59.080 |
8 | |
| TZS 1639:2021/ISO 3862:2020 | 2021 | Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification Specifies requirements for five types of spiral-wire-reinforced hydraulic hoses and hose assemblies of nominal size from 6,3 to 51.They are suitable for use with: — oil-based ICS : 23.100.40 /ISO 3862:2020 |
13 | TSHS 20,000/=USD 20 |
| 758:2021( 3rd Ed) EAS 356:2019 | 2021 | Textiles — Requirements for inspection and acceptance of used textile products Specifies the requirements and sampling method for the inspection and acceptance of used textile products. ICS 58.080.01 |
4 | TSHS 10,000/ USD 10 |
| TZS 1636:2021/ISO 18752:2014 | 2021 | Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has ICS : 23.040.70 ISO 18752:2014 |
16 | TSHS 25000/=USD 25 |
| TZS 2674-3:2021/ISO 4427-3:2019 | 2021 | Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings Specifies the fittings made from polyethylene (PE) for buried or above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage ICS : 93.025 ISO 4427-3:2019 |
35 | TSHS 40,000/=USD 40 |
| TZS 2674-2:2021/ISO 4427-2:2019 | 2021 | Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes Specifies the pipes made from polyethylene (PE) for buried or above ground applications, intended for the conveyance of: — water for human consumption; — raw water prior to treatment; ICS : 93.025 ISO 4427-2:2019 |
20 | TSHS 25000/=USD 25 |
| TZS 2851: 2021/ EAS 965:2020 | 2021 | Lipstick — Specification Specifies the requirements, sampling and test methods for lipstick. ICS 71.100.70 |
7 | TSHS 15,000/= USD 15 |
| TZS 2844: 2021/ EAS 966:2020 (1st Ed) | 2021 | Synthetic hair extensions — Specification Specifies the requirements, sampling and test methods for synthetic hair extensions for use on humans. ICS 71.100.01 |
8 | TSHS 15,000/= USD 15 |
| TZS 2671:2021/ISO 8029:2014 | 2021 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification Specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of −10 °C to 55 °C ICS : 23.040.70 ISO 8029:2014 |
16 | TSHS 25,000/=USD 25 |
| TZS 2849: 2021/EAS 958: 2020 | 2021 | Baby oils — Specification Specifies requirements, sampling and test methods for baby oils intended for use on baby skin. Products for which therapeutic claims are made are not covered by this standard. ICS 71.100.70 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2670:2021/ISO 5774:2016 | 2021 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification Specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C. ICS : 23.040.70 ISO 5774:2016 |
13 | TSHS 20,000/=USD20 |
| TZS 2577:2021/ISO 3780:2009 | 2021 | Road vehicles — World manufacturer identifier (WMI) code Specifies the content and structure of an identifier in order to establish, on a world-wide basis, the identification of road vehicle manufacturers. The world manufacturer identifier (WMI) c ICS : 43.020 ISO 3780:2009 |
5 | TSHS 10,000/=USD 10 |
| TZS 2575:2021/ISO 3779:2009 | 2021 | Road vehicles — Vehicle identification number (VIN) — Content and structure Specifies the content and structure of a vehicle identification number (VIN) in order to establish, on a world-wide basis, a uniform identification numbering system for road vehicles. ICS : 43.020 ISO 3779:2009 |
6 | TSHS 15,000/=USD 15 |
| TZS 3061:2021/EAS 981:2020 | 2021 | Hydraulic road binders ― Specification Specifies the mechanical, physical and chemical requirements for hydraulic road binders. It also outlines the conformity criteria and evaluation procedures to be adhered to by the manufactu ICS 93.080.20 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2666:2021/ ISO 3873:1977 | 2021 | Industrial safety helmets Specifies physical and performance requirements, methods of test and marking requirements. The mandatory requirements apply to helmets for general use in industry. Additional optional perfor ICS : 13.340.20 ISO 3873:1977 |
8 | TSHS 15,000/=USD 15 |
| TZS 3060-5:2021/EAS 982-5:2020 | 2021 | Bitumen and bituminous binders — Specification — Part 5: Performance graded bitumen Specifies requirements, sampling and test methods for performance graded bitumen suitable for pavement construction ICS 93.080.20 |
8 | TSHS 15,000/= USD 15 |
| TZS 2346 -5:2021/ISO 14520-5:2019 | 2021 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant Contains specific requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specifications, usage and safety a ICS : 13.220.10 ISO 14520-5:2019 |
11 | TSHS 20,000/=USD 20 |
| TZS 2955:2021/ ISO 7925:1999 | 2021 | Dried oregano (Origanum vulgare L.) — Whole or ground leaves — Specification Specifies requirements for processed or semi-processed dried oregano1) leaves of Origanum genus, species and sub-species, excluding Origanum majorana, in the whole or ground (powdered) form. ICS : 67.220.10 ISO 7925:1999 |
5 | TSHS 10,000/ USD 10 |
| TZS 3060-4:2021/EAS 982-4:2020 | 2021 | Bitumen and bituminous binders ― Specification ― Part 4: Cationic bitumen emulsion Specifies requirements, sampling and test methods for cationic bitumen emulsion suitable for pavement construction. ICS 93.080.20 |
13 | Tshs. 20,000/= USD 20 |
| TZS 693-1:2021/ISO 8559-1:2017 | 2021 | Size designation of clothes — Part 1: Anthropometric definitions for body measurement Provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases. The list of measurements specified in thi ICS : 61.020 ISO 8559-1:2017 |
80 | TSHS 85,000/=USD 85 |
| TZS 3060-3:2021/EAS 982-3:2020 | 2021 | Bitumen and bituminous binders ― Specification ― Part 3: Anionic bitumen emulsion Specifies requirements, sampling and test methods for anionic bitumen emulsions suitable for pavement construction ICS 93.080.20 |
13 | Tshs. 20,000/= USD 20 |
| TZS 3060-2: 2021/ EAS 982-2:2020 | 2021 | Bitumen and bituminous binders ― Specification ― Part 2: Cutback bitumen Specifies the requirements, sampling and test methods for all grades of cutback bitumen suitable for pavement construction ICS 93.080.20 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2957-1:2021/ISO 3632-1:2011 | 2021 | Spices — Saffron (Crocus sativus L.) — Part 1: Specification Establishes specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers.It applies to saffron in both of the following forms: a) filaments and cut filaments; b) p ICS : 67.220.10 ISO 3632-1:2011 |
8 | TSHS 15,000/=USD 15 |
| TZS 3060-1:2021/EAS 982-1:2020 | 2021 | Bitumen and bituminous binders — Specification — Part 1: Penetration grade bitumen Specifies the requirements, sampling and test methods for penetration graded bitumen suitable for pavement construction ICS 93.080.20 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2956:2021/ISO 11164:1995 | 2021 | Dried rosemary (Rosmarinus officinalis L.) — Specification Provides the requirements for dried rosemary (Rosmarinus officinalis) leaves in cut form ICS: 67.220.10 ISO 11164:1995 |
3 | TSHS 10,000/=USD 10 |
| TZS 2954:2021/ISO 6575:1982 | 2021 | Fenugreek, whole or ground (powdered) — Specification Specifies the requirements for this product, describes sampling, methods of test, and packing and marking. An annex includes recommendations relating to storage and transport conditions ICS:67.220.10 /ISO 6575:1982 |
3 | TSHS 10000/=USD 10 |
| TZS 3255:2021/EAS 999:2021 | 2021 | Drop on materials for road marking paint — Specification Specifies requirements, sampling and test methods for glass beads, antiskid aggregates, and the mixture of the two, which are applied as drop-on materials on road marking paints. ICS 87.040 |
30 | Tshs. 35,000/= USD 35 |
| TZS 3254:2021/EAS 998:2021 | 2021 | Textured paint — Specification Specifies requirements, sampling and test methods for water based textured paint suitable for exterior and interior use on concrete surfaces, boards, primed wood, primed metal to give a prot ICS 87.040 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2929-2:2021/ISO 7086-2:2000 | 2021 | Glass hollowware in contact with food — Release of lead and cadmium — Part 2: Permissible limits Specifies permissible limits for the release of lead and cadmium from glass hollowware that is intended to be used in contact with food .is applicable to glass hollowware intended for use ICS: 67.250 ISO 7086-2:2000 |
5 | TSHS 10,000/=USD 10 |
| TZS 2848: 2021/ EAS 963:2020 | 2021 | Lip balm (lip salve) — Specification Specifies requirements, sampling and test methods for lip balm (lip salve) which are petroleum or vegetable oil based. It does not cover lip balm for which therapeutic claims are made, lipst ICS 71.100.70 |
6 | TSHS 15,000/= USD 15 |
| TZS 2847: 2021/ EAS 964:2020 | 2021 | Lip shine (lip gloss) — Specification Specifies the requirements, sampling and test methods for lip shine (lip gloss) based on refined vegetable or mineral oils. It does not cover lip shine (gloss) for which therapeutic claims a ICS 70.100.71 |
4 | TSHS 10,000/ USD 10 |
| TZS 2846: 2021/ EAS 962:2020 | 2021 | Hair spray — Specification Specifies the requirements, sampling and test methods for hair spray. This standard is applicable to both water based and oil based hair sprays delivered by the aerosol or non-aerosol system ICS 71.100.70 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2930:2021/ISO 14285:2014 | 2021 | Rubber and plastics gloves for food services — Limits for extractable substances Specifies limits for extractable chemical substances for single-use gloves made from natural rubber, synthetic rubber, or plastic materials that are intended for use in food preparation, foo ICS:67.250 ISO 14285:2014 |
18 | TSHS 25000/=USD 25 |
| TZS 37-2:2021(4th Ed) EAS 186-2:2021 | 2021 | Bathing soap — Specification ― Part 2: Liquid Specifies requirements, sampling and test methods for liquid bathing soap. It does not apply to hand wash liquid detergents, shampoo and products for specific purposes such as those for in ICS 71.100.40 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2346-5:2021/ ISO 14520-5:2019 | 2021 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant Specific requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specifications, usage and safety aspects. ICS:13.220.10 ISO 14520-5:2019 |
11 | TSHS 20,000/= USD 20 |
| TZS 2647:2021/ ISO 7701:1994 | 2021 | Dried apples — Specification and test methods Contains definitions of relevant terms. Then specification of general requirements and of specific requirements, as grading, odour, taste, freedom from insects, moulds, etc., extraneous matt ICS : 67.080.10 ISO 7701:1994 |
10 | Tshs. 15,000/= USD 15 |
| TZS 2646:2021/ ISO 7702:2001 | 2021 | Dried pears — Specification and test methods Specifies requirements and test methods for dried pears from fruits of the species Pyrus communis. Cancels and replaces the first edition, which has been technically revised. ICS : 67.080.10 ISO 7702:2001 |
1 | Tshs. 10,000/= USD 10 |
| TZS 3154: 2021 | 2021 | Solid waste — Environmental management of compost processing facilities Provides environmental and safety requirements for siting, design, operation and closure of a compost facility. It does not apply to composting activities that do not require registration wi ICS: 13.030.10 |
4 | Tshs. 10,000/= USD 10 |
| TZS 3152: 2021 | 2021 | Air quality ― Tolerance limits for boiler pollutants emissions to the air Prescribes the tolerance limits for pollutants emissions from all types of boilers. Pollutants prescribed in this Tanzania standard originate from specific types of fuel used in firing boile ICS: 13.030.20 |
4 | TSHS 10,000/ USD 10 |
| TZS 3151:2021 | 2021 | Air quality ― Tolerance limits for incinerator pollutants emission to air Prescribes the tolerance limits for pollutants emissions from all types of incinerators except incinerators used for hospital wastes. ICS: 13.030.20 |
5 | TSHS 10,000/ USD 10 |
| TZS 783:2021/ EAS 907:2019 (3rd Ed) | 2021 | Fertilizers — Potassium sulphate (sulphate of potash) — Specification Specifies requirements, sampling and test methods for potassium sulphate (sulphate of potash) fertilizer. ICS 65.080 |
3 | TSHS 10,000/ USD 10 |
| TZS 2792: 2021/ EAS 923:2019 (1st Ed) | 2021 | Instant tea — Specification Specifies the requirements, sampling and test methods for instant tea of the species Camellia sinensis (Linneaus) O. Kuntze. ICS 67.160.10 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2791: 2021/ EAS 922:2019 (1st Ed) | 2021 | Flavoured black tea — Specification Specifies requirements, sampling and test methods for flavoured black tea. ICS 67.160.10 |
6 | TSHS 15,000/= USD 15 |
| TZS 2790:2021/ ISO 10621:1997 | 2021 | Dehydrated green pepper (Piper nigrum L.) — Specification Specifies the requirements for dehydrated green pepper (Piper nigrum L.). Recommendation relating to conditions of storage and transport are given in annex A. ICS : 67.220.10 ISO 10621:1997 |
4 | TSHS 10,000/ USD 10 |
| TZS 2789:2021/ ISO 11162:2001 | 2021 | Peppercorns (Piper nigrum L.) in brine — Specification and test methods Specifies the requirements for peppercorns (Piper nigrum L.) in brine. ICS : 67.220.10 ISO 11162:2001 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2784:2021/ ISO 7910:1991 | 2021 | Dried mulberries — Specification Specifies requirements for dried mulberries, obtained from seedless fruits of the mulberry tree, Morus alba Linnaeus (White Mulberry), for human consumption. ICS : 67.080.10 ISO 7910:1991 |
6 | TSHS 15,000/= USD 15 |
| TZS 2783:2021/ ISO 7908:1991 | 2021 | Dried sweet cherries — Specification Specifies requirements for dried sweet cherries, obtained from fruits of the sweet cherry tree (Prunus avium Linnaeus), for human consumption. ICS :67.080.10 ISO 7908:1991 |
6 | TSHS 15,000/= USD 15 |
| TZS 2782:2021/ ISO 7703:1995 | 2021 | Dried peaches — Specification and test methods Specifies requirements and test methods for dried peaches from fruits of the species Prunus persica. Cancels and replaces the first edition, which has been technically revised. ICS :67.080.10 ISO 7703:1995 |
10 | TSHS 15,000/= USD 15 |
| TZS 2677:2021/ ISO 15190:2020 | 2021 | Medical laboratories — Requirements for safety Specifies requirements for safe practices in the medical laboratory (herein after referred to as "the laboratory"). ICS : 11.100.01 ISO 15190:2020 |
79 | Tshs. 85,000/= USD 85 |
| TZS 2676:2021/ ISO 22870:2016 | 2021 | Point-of-care testing (POCT) — Requirements for quality and competence Gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with ISO 15189. The requirements of this document apply when POCT is carried out in ICS : 03.120.10 ISO 22870:2016 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2675:2021/ ISO 15198:2004 | 2021 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer Describes a process for manufacturers of in vitro diagnostic medical devices to validate quality control procedures they recommend to their users. These quality control procedures are intend ICS : 11.100.10 ISO 15198:2004 |
10 | TSHS 15,000/= USD 15 |
| TZS 1968-11:2021/ ISO 10993-11:2017 | 2021 | Biological evaluation of medical devices — Part 11: Tests for systemic toxicity Specifies requirements and gives guidance on procedures to be followed in the evaluation of the potential for medical device materials to cause adverse systemic reactions. ICS :11.100.20 ISO 10993-11:2017 |
29 | Tshs. 35,000/= USD 35 |
| TZS 1882: 2021/ EAS 929:2019 (1st Ed) | 2021 | Solvent-based paint remover — Specification Specifies the requirements, methods of sampling and test for solvent-based paint removers. The paint removers are intended for general use on painted, varnished or lacquered on metal and oth ICS 87.040 |
18 | TSHS. 25,000/= USD 25 |
| TZS 2583-2: 2021/ EAS 928-2:2019 (1st Ed) | 2021 | Hot applied thermoplastic road marking paint — Specification —Part 2 — Road performance Specifies the performance requirements for thermoplastic material which have been melted and applied on road surfaces by spray, screed or extruded. ICS 87.040 |
10 | TSHS 15,000/= USD 15 |
| TZS 2583-1: 2021/ EAS 928-1:2019 (1th Ed) | 2021 | Hot applied thermoplastic road marking paint — Specification, Part 1: Constituent material and mixtures Specifies the requirements, methods of sampling and test for hot applied thermoplastic road marking paint and constituents that are melted and applied by spray, screed or extruded. ICS 87.040 |
21 | Tshs. 30,000/= USD 30 |
| TZS 2879:2021/ ISO 14511:2019 | 2021 | Measurement of fluid flow in closed conduits — Thermal mass flowmeters Gives guidelines for the specification, testing, inspection, installation, operation and calibration of thermal mass gas flowmeters for the metering of gases and gas mixtures. It is not appl ICS :17.120.10 ISO 14511:2019 |
30 | Tshs. 35,000/= USD 35 |
| TZS 2881:2021/ ISO 10790:2015 | 2021 | Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) Gives guidelines for the selection, installation, calibration, performance, and operation of Coriolis flowmeters for the measurement of mass flow and density. This International Standard als ICS : 17.120.10 ISO 10790:2015 |
37 | Tshs. 45,000/= USD 45 |
| TZS 2882:2021/ ISO 13710:2004 | 2021 | Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps Specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting ICS : 75.180.20 ISO 13710:2004 |
78 | Tshs. 85,000/= USD 85 |
| TZS 2883:2021/ ISO 13709:2009 | 2021 | Centrifugal pumps for petroleum, petrochemical and natural gas industries Specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. CS : 71.120.99 ISO 13709:2009 |
184 | Tshs. 190,000/= USD 190 |
| TZS 2809:2021/ ISO 4978:2018 | 2021 | Steel sheet and strip for welded gas cylinders Specifies the characteristics of hot-rolled steel sheet and strip with a thickness up to 12 mm inclusive of the non-alloyed steels listed in Table 1, which are intended for welded gas cylind ICS 77.140.30 ISO 4978:2018 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2823-2:2021/ ISO 4210-2:2014 | 2021 | Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles Specifies safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies having saddle height as given in Table 1, and lays down guidelines for manu ICS : 43.150 ISO 4210-2:2014 |
34 | Tshs. 40,000/= USD 40 |
| TZS 1638:2021/ ISO 1436:2020 | 2021 | Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification Specifies requirements for six types of wire-braid-reinforced hoses and hose assemblies of nominal size from 5 to 51. This document also specifies the hose of nominal size 63 for types 2SN a ICS : 23.100.40 ISO 1436:2020 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2889:2021/ ISO 17633:2017 | 2021 | Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification Specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding posi ICS :25.160.20 ISO 17633:2017 |
31 | Tshs. 40,000/= USD 40 |
| TZS 2890:2021/ ISO 17632:2015 | 2021 | Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification Specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition or in t ICS : 25.160.20 ISO 17632:2015 |
29 | Tshs. 35,000/= USD 35 |
| TZS 2893:2021/ ISO 1461:2009 | 2021 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods Specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not m ICS : 25.220.40 ISO 1461:2009 |
16 | Tshs. 25,000/= USD 25 |
| TZS 2892:2021/ ISO 2408:2017 | 2021 | Steel wire ropes — Requirements Specifies requirements for the manufacture, testing, acceptance, packing, marking and issuing of a certificate of quality of wire ropes. It is applicable to round strand ropes and compacted ISO 2408:2017 |
50 | Tshs. 55,000/= USD 55 |
| TZS 2569:2021/ EAS 930:2019 | 2021 | Paper and board food contact packaging material — Specification Specifies the requirements, sampling and test methods for paper and board food contact packaging mater ICS 55.040 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2571: 2021/ EAS 932:2020 | 2021 | Paper plates and cups for food packaging — Specification Specifies the requirements, sampling and test methods for paper plates and cups, with or without lids, used for food packaging. ICS 55.040 |
8 | TSHS 15,000/= USD 15 |
| TZS 2878-1:2021/ EAS 985-1:2020 | 2021 | Hermetic storage bags — Specification — Part 1: Woven polypropylene outer bag Specifies the requirements, methods of sampling and test for hermetic bags for storage of dried food commodities, derived products and seeds. It covers hermetic bags whose outer bags are mad ICS 55.080 |
18 | Tshs. 25,000/= USD 25 |
| TZS 2877-1:2021/ EAS 987-1:2020 | 2021 | Glass containers — Specification — Part 1: Bottles for carbonated and non-carbonated drinks Specifies the requirements, methods of sampling and test for glass bottles used for packaging of carbonated and non-carbonated drinks. It does not cover glass containers used in pharmaceutic ICS 81.040.30; 55.100 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2876-1:2021/ EAS 984-1:2020 | 2021 | Packaging ancillary materials — Specification ― Part 1: Single-sided pressure sensitive adhesive tapes Specifies the requirements, methods of sampling and test for single-sided pressure sensitive adhesive tapes used in packaging. It does not apply to tapes with adhesives on both surfaces. ICS 55.040 |
7 | TSHS 15,000/= USD 15 |
| TZS 2572:2021/ EAS 986:2020 | 2021 | Portable rigid plastic hermetic grain silo — Specification Specifies the requirements, methods of sampling and test for portable rigid plastic hermetic silo used for storage of dried food commodities, derived products and seeds. ICS 55.120 |
16 | Tshs. 25,000/= USD 25 |
| TZS 656:2021 | 2021 | Copper/chromium/arsenic composition for the preservation of timber — Specification Specifies the requirements for two types of water-borne preservatives containing mixtures of compounds of copper (II), chromium (VI) and arsenic (V). ICS: 71.100.50 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2692:2021/ ISO 26986:2010 | 2021 | Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification Specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls. ICS : 97.150 ISO 26986:2010 |
8 | TSHS 15,000/= USD 15 |
| TZS 2696-1:2021/ ISO 5019-1:1984 | 2021 | Refractory bricks — Dimensions — Part 1: Rectangular bricks Specifies the dimensions ot two series of rectangular refractory bricks. These two series of bricks may be used in conjunction with the series of arch bricks whose dimensions are specified i ICS : 81.080 ISO 5019-1:1984 |
2 | Tshs. 10,000/= USD 10 |
| TZS 2696-2:2021/ ISO 5019-2:1984 | 2021 | Refractory bricks — Dimensions — Part 2: Arch bricks Specifies the dimensions of two series of refractory arch bricks, each with a constant median dimension and one series of refractory arch bricks with a constant backface dimension. ICS : 81.080 ISO 5019-2:1984 |
2 | TSHS 10,000/ USD 10 |
| TZS 2696-3:2021/ ISO 5019-3:1984 | 2021 | Dome bricks for electric arc furnace roofs Specifies the dimensions of rectangular checker bricks for regenerative furnaces. ICS : 81.080 ISO 5019-3:1984 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2696-4:2021/ ISO 5019-4:1984 | 2021 | Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs Specifies the dimensions sf refractory bricks for use in the domes of electric arc furnace roofs. In the annex, the dimensions of special bricks also used for the construction of these furn ICS : 81.080 ISO 5019-4:1984 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2696-5:2021/ ISO 5019-5:1984 | 2021 | Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters Specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. ICS : 81.080 ISO 5019-5:1984 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2696-6:2021/ ISO 5019-6:2005 | 2021 | Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters Specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. ICS : 81.080 ISO 5019-6:2005 |
5 | TSHS 10,000/ USD 10 |
| TZS 2767:2021/ ISO 24011:2009 | 2021 | Resilient floor coverings — Specification for plain and decorative linoleum Specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls. ICS : 97.150 ISO 24011:2009 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2768:2021/ ISO 20326:2016 | 2021 | Resilient floor coverings — Specification for floor panels/assembly for loose laying Specifies requirements and test methods for floor panels/assembly for domestic and commercial levels of use, which have surface layers consisting of resilient floor covering. ICS : 97.150 ISO 20326:2016 |
18 | Tshs. 25,000/= USD 25 |
| TZS 2697:2021/ ISO 9205:1988 | 2021 | Refractory bricks for use in rotary kilns — Hot-face identification marking Specifies a system of marking the working face of refractory bricks for use in rotary kilns. The method is intended to provide a quick and easy way of checking that each brick has been insta ISO 9205:1988 |
3 | TSHS 10,000/ USD 10 |
| TZS 1904:2021/ ISO 21690:2006 | 2021 | Glass in building — Glass blocks — Specification and test methods Specifies requirements for the properties of glass blocks used for the construction of non-load-bearing walls and horizontally spanning panels. ISO 21690:2006 also specifies test methods use ICS : 81.040.20 ISO 21690:2006 |
10 | TSHS 15,000/= USD 15 |
| TZS 2942:2021/ ISO 1096:2014 | 2021 | Plywood — Classification Provides systems of classification of plywood panels based on general appearance and principal characteristics. ICS : 79.060.10 |
2 | TSHS 10,000/ USD 10 |
| TZS 2947-3:2021/ ISO 2426:2020 | 2021 | Plywood — Classification by surface appearance — Part 3: Softwood Specifies the nature and limits of characteristics inherent in wood and manufacturing defects enabling the visual assessment of the plywood for allocation to an appearance class. It applies ICS :79.060.10 ISO 2426:2020 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2947-2:2021/ ISO 2426-2:2020 | 2021 | Plywood — Classification by surface appearance — Part 2: Hardwood Specifies the nature and limits of characteristics inherent in wood and manufacturing defects enabling the visual assessment of the plywood for allocation to an appearance class. It applies ICS : 79.060.10 ISO 2426-2:2020 |
5 | TSHS 10,000/ USD 10 |
| TZS 2947-1:2021/ ISO 2426-1:2020 | 2021 | Plywood — Classification by surface appearance — Part 1: General Establishes general rules for the classification of plywood by its surface appearance. It concerns plywood made of hardwood including tropical and temperate hardwood, softwood and plywood de ICS : 79.060.10 ISO 2426-1:2020 |
4 | TSHS 10,000/ USD 10 |
| TZS 2962:2021/ ISO 1954:2013 | 2021 | Plywood — Tolerances on dimensions Specifies dimensional tolerances of plywood panels (length, width, thickness) and tolerances for edge straightness and squareness. ICS :79.060.10 SO 1954:2013 |
2 | Tshs. 10,000/= USD 10 |
| TZS 2944:2021/ ISO 12465:2007 | 2021 | Plywood — Specifications Establishes requirements for the specification of plywood for general and structural use, in dry, tropical dry/humid and high-humidity/exterior conditions. It includes requirements for the q ICS : 79.060.10 ISO 12465:2007 |
10 | TSHS 15,000/= USD 15 |
| TZS 2948-2:2021/ ISO 12466-2:2007 | 2021 | Plywood — Bonding quality — Part 2: Requirements Specifies requirements for determination of bonding quality class of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resins, according to their intended end uses. ICS :79.060.10 ISO 12466-2:2007 |
4 | TSHS 10,000/ USD 10 |
| TZS 2945:2021/ISO 13608:2014 | 2021 | Plywood — Decorative veneered plywood Specifies the terms, classifications, requirements, test methods, marking, for decorative veneered plywood with natural wood veneer, coloured veneer, laminated veneer, multilaminar veneer, a ICS :79.060.10 ISO 13608:2014 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2946:2021/ ISO 13609:2014 | 2021 | Wood-based panels — Plywood — Blockboards and battenboards Establishes requirements for the specifications of blockboards and battenboards for general use, in dry, tropic dry/humid, and high-humid/exterior conditions. It includes requirements of mat ICS :79.060.99 ISO 13609:2014 |
6 | TSHS 15,000/= USD 15 |
| TZS 2598:2021/ISO 28901:2011 | 2021 | Soil quality — Guidance for burial of animal carcasses to prevent epidemics Provides guidance on environment-friendly burial methods of animal carcasses to prevent epidemics, to curtail the spread of the disease, to destroy the causative agents, and to dispose of th ICS :13.080.99 ISO 28901:2011 |
29 | Tshs. 35,000/= USD 35 |
| TZS 2852:2021/ISO 8068:2006 | 2021 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines Specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turb ICS : 75.100 ISO 8068:2006 |
16 | Tshs. 25,000/= USD 25 |
| TZS 2651:2021/ISO 13738:2011 | 2021 | Lubricants, industrial oils and related products (class L) — Family E (Internal combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD Specifies the requirements of lubricating oils (hereinafter referred to as "two-stroke oils") to be used in two-stroke-cycle spark-ignition gasoline engines which employ a crankcase scavengi ICS : 75.100 ISO 13738:2011 |
7 | TSHS 15,000/= USD 15 |
| TZS 2653-1:2021/ ISO 12925-1:2018 | 2021 | Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems Establishes the specifications relative to family C (gears) for lubricants, industrial oils and related products of Class L (see ISO 6743‑6). This document deals only with lubricants for enc ICS : 75.100 ISO 12925-1:2018 |
44 | Tshs. 50,000/= USD 50 |
| TZS 2652-6:2021/ISO 6743-6:2018 | 2021 | Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (gear systems) Establishes the detailed classification of fluids of Family C (gear systems) which belongs to class L (lubricants, industrial oils and related products). It can be read in conjunction with I ICS : 75.100 ISO 6743-6:2018 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2652-99:2019/ISO 6743-99:2002 | 2021 | Lubricants, industrial oils and related products (class L) — Classification — Part 99: General Establishes a general system of classification, which appliies to lubricants, Industrial oils and related products, designated by the prefix letter "L". Within class L, 18 families of produc CS : 75.100 6743-99:2002 |
3 | TSHS 10,000/ USD 10 |
| TZS 162: 2021/ EAS 947:2019 (4th Ed) | 2021 | Jams, jellies and marmalades — Specification Specifies requirements, sampling and test methods for jams, jellies and marmalades intended for direct human consumption.It does not apply to: a) products when indicated as being intended f ICS 67.080.00 |
10 | TSHS 15,000/= USD 15 |
| TZS 1430: 2021/ EAS 920:2019 (4th Ed) | 2021 | Tea masala — Specification Specifies the requirements, sampling and test methods for tea masala which is used as a flavouring material in the preparation of tea. ICS 67.220.10 |
4 | TSHS 10,000/ USD 10 |
| TZS 2005: 2017 | 2017 | Textiles — Dust mask — Specification Specifies dust masks meant for protection against non-toxic mechanically generated dust particles contaminated atmospheres which may be a nuisance if inhaled in a dusty working environment. ICS: 59.080.01 |
3 | TSHS 10,000/ USD 10 |
| TZS 2004: 2017 | 2017 | Semitrailers for transportation of general cargo and freight containers Specifies the requirements for semi-trailers meant for transportation of freight containers and general cargo capable of operating at speeds above 30 km/h. This Tanzania Standard does not co ICS: 43.040.70 |
25 | Tshs. 30,000/= USD 30 |
| TZS 3006: 2022 /ISO 18188: 2016 | 2022 | Specification of polypropylene drinking straws Specifies the general characteristics, requirements and methods for testing of polypropylene (PP) drinking straws (herein after called PP straws). It is applicable to PP straws having an inn ICS: 67.250 ISO 18188: 2016 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2441: 2020 | 2020 | Baking powder — Specification Specifies the requirements and methods for sampling and test of baking powder. ICS: 67.00 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2417:2020 | 2020 | Goat carcasses and meat cuts — Specification Prescribes the requirements, sampling and test methods for goat carcasses and meat cuts intended for human consumption. ICS: 67.120.10 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2222: 2018 | 2018 | Specification for handheld metal detectors for use in weapon detection Covers the methods of test and performance requirements of hand held metal detectors used for determining the location of metal weapons carried on a person and in a small package. It does no ICS: 25.140.01 |
9 | TSHS 15,000/= USD 15 |
| TZS 2256: 2018 | 2018 | Standard Specification for fuel oil meters of the volumetric positive displacement type Provides the minimum requirements for the design, fabrication, pressure rating, marking, and testing for fuel oil meters (volumetric positive displacement type). The following safety hazards ICS: 75.200 |
5 | TSHS 10,000/ USD 10 |
| TZS 2266: 2018 | 2018 | Solid waste management — Waste tyres Prescribes stage methods of generation, collection, transportation, storage, utilization and disposal of waste tyres. It covers the generation of waste tyres from individual level to institu ICS:13.030.10 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2298:2018 | 2018 | Baby toilet soap — Specification Specifies requirements and sampling and test methods for baby toilet soap. ICS: 71.100.40 |
12 | Tshs. 20,000/= USD 20 |
| TZS 2507:2020 | 2020 | Textiles ― High Density Polyethylene (HDPE)/Polypropylene (PP) woven sacks for packaging of flour (milled product) ― Specification Prescribes the requirements of two types of HDPE/PP woven sacks suitable for packing flour. Type 1 Suitable for 25 kg and 50 kg . Type 25 Suitable for 5 kg and 10 kg. ICS: 55.080 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2508:2020 | 2020 | Textiles ― High Density Polyethylene (HDPE)/Polypropylene (PP) woven sacks for packaging of 50 kg/25 kg sugar ― Specification Prescribes the requirements of two types of HDPE/PP woven sacks suitable for packaging of sugar, namely: Type 1 – Sacks having packaging capacity of 50 kg; and Type 2 – Sacks having packagin ICS: 55.080 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2664: 2021 | 2021 | Aluminium foil for packaging — Specification Specifies the requirements, sampling and test methods for annealed aluminium alloy foil used for general packaging. It covers annealed aluminium alloy foil containing 98.00 % minimum aluminu ICS: 77.150.10 |
9 | TSHS 15,000/= USD 15 |
| TZS 3119: 2023 | 2021 | Denatured ethanol for use as cooking and appliance fuel — Specification Specifies requirements, sampling and tests method for denatured ethanol for use as cooking or heating appliance fuel, or both. ICS: 75.160.40 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2845-1:2021/EAS 967-1:2020 | 2021 | Butter for cosmetic use — Specification — Part 1: Shea butter Specifies requirements, sampling and test methods for shea butter for cosmetic use derived from the kernels of the sheanuts (Butyrospermum parkii). It does not cover products for which thera ICS 71.100.70 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2850: 2021/EAS 957: 2020 | 2021 | Aftershave — Specification Specifies the requirements, sampling and test methods for aftershave. ICS: 71.100.70 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2825:2021 | 2021 | Breakfast cereals — Specification Prescribes the requirements and methods of sampling and test for flaked/puffed breakfast cereals including muesli and cereal bars, for direct human consumption. ICS:67.060 |
7 | TSHS 15,000/= USD 15 |
| TZS 1634-1:2022(3rd Ed) EAS 147-1:2019 | 2022 | Vinegar — Specification — Part 1: Vinegar from natural sources Specifies requirements, sampling and test methods for vinegar from natural sources intended for human consumption. ICS 67.220.20 |
5 | TSHS 10,000/ USD 10 |
| TZS 2353: 2019 | 2019 | Adhesives — Ethyl and methyl cyanoacrylate — Specification Specifies requirements, sampling and methods of test for adhesives – ethyl and methyl cyanoacrylate. ICS: 83.180 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2607:2021 | 2021 | Tolerance limits for industrial effluents discharged into water bodies — Pulp and paper mills Prescribes the applicable limits to effluents discharged from the pulp and paper mills directly into water bodies and public sewers. It covers integrated pulp and paper facilities using unbl ICS: 13.060 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2543:2020 | 2020 | Textiles ― Polypropylene (PP) woven mats ― Specification Prescribes requirements of woven mats. The weave construction of the mats shall be plain, twill, satin, sateen weave or combination of designs. This Tanzania Standard does not specify the ge ICS: 59.080.30 |
3 | Tshs. 10,000/= USD 10 |
| TZS 2499: 2019 | 2019 | Pumpkin seeds — Specification Specifies requirements and methods of sampling and test for seeds obtained from pumpkin (Cucurbita pepo L.) intended for human consumption or for other use in the food industry. ICS: 67.200.10 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2509:2020 | 2020 | Textiles ― High Density Polyethylene (HDPE)/Polypropylene (PP) woven sacks for packing food grains ― Specification Prescribes the requirements of two types of HDPE/PP woven sacks suitable for packaging of all types of food grains (wheat, paddy, rice, pulses, millet, etc.). ICS: 55.080 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2525:2021 | 2021 | Thermal paper rolls — Specification Specifies the requirements, sampling and test methods for thermal paper rolls. ICS 85.080.01 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2657: 2021 | 2021 | Test liner board — Specification Specifies the requirements, sampling and test methods of test liner board used to manufacture corrugated board boxes. Test liner board is a strong paper made mainly from recycled pulp or fib ICS: 85.080.30 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2655: 2021 | 2021 | Corrugating medium for corrugated board — Specification Specifies the requirements, sampling and test methods of corrugating medium/fluting used to manufacture packaging containers. 85.080.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2541: 2020 | 2020 | Textiles — Specification for polyester fishing nets Specifies minimum requirements of fishing nets made from polyester fishing twine. ICS: 59.080 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2499: 2019 | 2019 | Pumpkin seeds — Specification Specifies requirements and methods of sampling and test for seeds obtained from pumpkin (Cucurbita pepo L.) intended for human consumption or for other use in the food industry. ICS: 67.200.10 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2188:2022/EAS 953:2020 | 2021 | Dressed Poultry — Specification Specifies requirements, methods of sampling and test for dressed poultry. It applies to birds domesticated for human consumption. ICS 67.120.20 |
5 | Tshs. 10,000/= USD 10 |
| TZS 2418:2021/EAS 954: 2020 | 2021 | Meat Sausages — Specification Specifies requirements, methods of sampling and test for sausages made from meat intended for human consumption. ICS 67.120.20 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2843:2021/EAS 955:2020 | 2021 | Production of Packaged Meat Products — Hygienic Requirements Specifies requirements for the production of packaged meat products processed or manufactured in an established meat processing factory. ICS 67.120.10 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2658:2021 | 2021 | Carbon dioxide for beverage and food industry — Specification Prescribes requirements, sampling and test methods for carbon dioxide for beverage and food industry. It does not apply to the following: a) carbon dioxide used for fire extinguishers, refr ICS: 67.160.20 |
22 | Tshs. 30,000/= USD 30 |
| TZS 611-4: 2020 | 2020 | 13A plugs, socket-outlets, adaptors and connection units — Part 4: Specification for 13A fused connection units switched and unswitched Specifies requirements for 13A fused fixed connection units for household, commercial and light industrial purposes, with particular reference to safety in normal use. The connection units a ICS: 29.120.30 |
51 | Tshs. 60,000/= USD 60 |
| TZS 611-2: 2020 | 2020 | 13A plugs, socket outlets, adaptors and connection units — Part 2: Specification for 13A switched and unswitched socket outlets Specifies requirements for 13A switched and unswitched shuttered socket outlets for household, commercial and light industrial purposes, with particular reference to safety in normal use. Th ICS: 29.120.30 |
86 | Tshs. 95,000/= USD 95 |
| TZS 611-1:2020 | 2020 | 13A plugs, socket-outlets, adaptors and connection units — Part 1: Specification for rewirable and non-rewirable 13 A fused plug Specifies requirements for 13A fused plugs having insulating sleeves on line and neutral pins, for household, commercial and light industrial purposes, with particular reference to safety in ICS: 29.120.30 |
79 | Tshs. 85,000/= USD 85 |
| TZS 2278: 2018 | 2018 | Raw cashew nut (in-shell) — Specification Specifies requirements, sampling and test methods for raw cashew nut obtained from the cashew tree (Anacardium occidentale, Linnaeus) for further processing. ICS: 67.080.10 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2649: 2020 | 2020 | Banana flour — Specification Prescribes requirements, sampling and test methods for green/unripe banana flour intended for human consumption or for other use in the food industry. ICS: 67:220.10 ICS: 67:220.10 |
4 | Tshs. 10,000/= USD 10 |
| TZS 2185: 2018 | 2018 | Dried meat — Specification Specifies requirements, methods of sampling and test for dried deboned meat meant for human consumption. ICS: 67.120.10 |
5 | TSHS 10,000/ USD 10 |
| TZS 2003: 2017 | 2017 | Cider and perry — Specification Specifies requirements and methods of sampling and test for cider and perry for human consumption. ICS: 67.160.10 |
6 | Tshs. 15,000/= USD 15 |
| TZS 3037:2021 | 2021 | Municipal and industrial wastewaters — General tolerance limits for use of treated wastewater in irrigation Provides requirements for treated effluents discharged from municipal and industrial establishments intended for irrigation purposes. It also provides specifications for treated effluent for ICS: 13.030.20 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2976: 2021 | 2021 | Pastry — Specification Specifies requirements, methods of sampling and test for pastries intended for human consumption. ICS: 67.060 |
5 | TSHS 10,000/ USD 10 |
| TZS 2911: 2021 | 2021 | Ethanol fuelled cooking appliances — Specification Covers the requirements for ethanol fuelled appliances for cooking and heat generation in households. It does not cover the requirements for lamps. ICS: 97.040.20 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2709: 2022 | 2022 | Flexible plastic packaging — Specification Specifies requirements, sampling and test methods for flexible plastic packaging materials.This Tanzania Standard does not cover woven and non-woven plastic materials. ICS: 55.040 |
10 | TSHS 15,000/= USD 15 |
| TZS 2183: 2018 | 2018 | Table eggs — Specification Specifies requirements, methods of sampling and test for chicken table eggs. ICS: 67.120.20 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1228:2009/ISO 22991:2004 | 2009 | Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction Specifies minimum requirements concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded steel liquefied petroleum gas ( ICS 23.020.30; |
31 | TSHS 40,000/ USD 40 |
| TZS 3141:2021 | 2021 | Shoe paste type — Specification polish wax solvent Specifies requirements, sampling and test methods for shoe wax solvent type polish suitable for application to footwear and leather goods. ICS 71.100.40 |
14 | Tshs. 20,000/= USD 20 |
| TZS 3140:2021 | 2021 | General purpose thinner for synthetic paints and varnishes — Specification Specifies requirements, sampling and test methods for general purpose thinner, for synthetic paints and varnishes. ICS 87.060.30 |
4 | TSHS 10,000/ USD 10 |
| TZS 3138:2021 | 2021 | Tile cleaners — Specification Specifies requirements, sampling and test methods for tile cleaners used for light and heavy-duty cleaning. ICS 71.100.40 |
17 | Tshs. 25,000/= USD 25 |
| TZS 3052:2021 | 2021 | Calf milk replacers — Specification Specifies requirements and sampling and test methods for calf milk replacers. 67.120.20 |
4 | TSHS 10,000/ USD 10 |
| TZS 2381:2019/ISO 12540:2017 | 2019 | Glass in building — Tempered soda lime silicate safety glass Covers product definitions, product characteristics, i.e. tolerances, flatness, edgework, etc., fracture characteristics, including fragmentation, and the physical and mechanical characteris 81.040.20 ISO 12540:2017 |
33 | TSHS 40,000/ USD 40 |
| TZS 1983-1:2021/ EAS 58-1:2021 | 2021 | Compounded dog food — Specification — Part 1: Complete food Specifies requirements, sampling and test methods for complete dog food. ICS 65.120 |
15 | TZS 20,000/-USD 20 |
| TZS 2187:2021/EAS 26:2020 | 2021 | Canned corned beef — Specification Specifies requirements, methods of sampling and test for canned corned beef products intended for human consumption ICS: 67.120.10 |
4 | TZS 10,000/-USD 10 |
| TZS 2578: 2020 - EAS 914: 2019 | 2020 | Mild steel nails — Specification Specifies requirements, sampling and test methods for, tolerance on dimensions, finish and surface coating, for the mild steel nails for general applications.The types of nails covered are l ICS: 77.140.65 |
26 | TSHS 35,000/= USD 35 |
| TZS 2330: 2019 | 2019 | Sugar free carbonated soft drinks — Specification Prescribes the requirements and methods of sampling and test for sugar free carbonated soft drinks of which only non-nutritive sweeteners are used as sweetening agents. ICS: 67.160.20 |
17 | TSHS 25,000/= USD 25 |
| TZS 2182: 2018 | 2018 | Sausages — Specification — Part 1: Red meat sausages Specifies requirements, methods of sampling and test for red meat sausages from cattle, sheep, goats, pigs and other animals intended for human consumption. ICS: 67.120.10 |
8 | TSHS 15,000/= USD 15 |
| TZS 2303: 2020 | 2020 | Non-woven bags — Specification Specifies the requirements, test methods and sampling plan for carrier bags made from non-woven fabrics. It does not cover feel and luster of the fabric. ICS: 59.080.30 |
5 | TSHS 10,000/= USD 10 |
| TZS 1229:2017 | 2017 | Gaseous oxygen for medical use ― Specification Specifies requirements and sampling and test methods for oxygen gas that is intended to be used for medical applications.This Tanzania Standard does not apply to oxygen for industrial, breat ICS: 71.060.01 |
13 | TSHS 20,000/= USD 20 |
| TZS 2418-2: 2020 | 2020 | Sausage — Specification — Part 2: Chicken sausage Specifies requirements, sampling and test methods for chicken sausages intended for human consumption. ICS: 67.120.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 2505:2019 | 2019 | Kitchen sinks — Functional requirements and test methods Specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers' instruc ICS: 91.140.70 |
21 | TZS 30,000/= USD 30 |
| TZS 877-2: 2016- IEC 61215-2: 2016 | 2016 | Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures Intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. The objective of this test sequence is to determine th ICS: 27.160 |
38 | |
| TZS 877-1: 2016- IEC 61215-1: 2016 | 2016 | Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements Lays down requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates, as defined in IEC 607 ICS: 27.160 |
16 | |
| TZS 2328: 2018- IEC 60502-2: 2014 | 2018 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) — Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) u Specifies the construction, dimensions and test requirements of power cables with extruded solid insulation from 6 kV up to 30 kV for fixed installations such as distribution networks or ind ICS: 29.060.20 |
78 | |
| TZS 1632: 2015 | 2015 | Leather — Wet-blue goat skins — Specification Specifies requirements, method of sampling and testing of the wet-blue goat skin tanned with the use of basic chromium sulphate as the primary tanning agent. ICS: 59.140.30 |
4 | TZS 10,000/ USD 10 |
| TZS 1631: 2015 | 2015 | Leather — Bovine wet-blue — Specification Specifies requirements, method of sampling and testing of the wet-blue leather produced from bovine hides and parts of bovine hides tanned with the use of basic chromium sulphate as the prim ICS: 59.140.30 |
4 | TZS 10,000/ USD 10 |
| TZS 1199-10: 2015 | 2015 | Methods of sampling and test for crude and refined glycerine Part 10: Determination of arsenic content: Silver diethyldithiocarbamate method Specifies a silver diethyldithiocarbamate photometric method for the determination of the arsenic content of glycerols for industrial use. ICS: 71.080.01 |
5 | TZS 10,000/ USD 10 |
| TZS 751: 2015 | 2015 | Determination of bromine in workplace atmospheres Describes the collection of airborne bromine (Br2) in the breathing zone of personnel in the workplace and the subsequent analysis by ion chromatography (IC). The qualitative detection limit ICS: 13.040.30 |
13 | TZS 20,000/ USD 20 |
| TZS 2054: 2017 - ISO 16958: 2015 | 2017 | Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method Specifies a method for the quantification of individual and/or all fatty acids in the profile of milk, milk products, infant formula and adult nutritional formula, containing milk fat and/or ICS: 67.100 |
45 | TZS 50,000/ USD 50 |
| TZS 2512:2020 | 2020 | Textiles ― Specification for non-woven cleaning wipes Prescribes the constructional details and other requirements for non-woven cleaning wipes, but covers both dry and wet cleaning wipes but it does not specify flavour/smell, colour feel and l ICS: 59.080.30 |
7 | TSHS 15,000/= USD 15 |
| TZS 2251:2018 | 2018 | Paper towel — Specification Specifies requirements, sampling and test methods for paper towels, in rolls and in sheets (single ply and double ply),suitable for general and industrial purposes. ICS: 85.080.20 |
10 | TSHS 15,000/= USD 15 |
| TZS 900-2: 2020 | 2020 | Textiles — Specification for knitted vests — Part 2 — Knitted vests for females Specifies the requirements and method of test for bleached or dyed knitted vests for females, but does not specify the general appearance, feel, lustre or degree of whiteness of the vests ICS: 61.020 |
8 | TSHS 15,000/= USD 15 |
| TZS 1407: 2016- ISO 7875-1: 1996 | 2016 | Water quality — Determination of surfactants — Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS) Spectrometric method for the determination of anionic surfactants by measurement of the methylene blue index (MBAS) in aqueous media. Suitable for drinking water, surface water and waste wat ICS: 13.060.50 |
9 | TSHS 15,000/= USD 15 |
| TZS 1403: 2016- ISO 6468: 1996 | 2016 | Water quality — Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes — Gas chromatographic method after liquid-liquid extraction Describes a method for determining certain organochlorine insecticides, polychlorinated biphenyls (PCBs) and chlorobenzenes (except the mono- and dichlorobenzenes) in drinking water, ground ICS: 13.060.50 |
24 | TZS 30,000/= USD 30 |
| TZS 2519:2020/ISO 758: 1976 | 2020 | Liquid chemical products for industrial use ― Determination of density at 20 ⁰C The principle of the specified method of reference consists in the determination of the mass of a volume of the substance at 20 °C which is contained in a pyknometer, and the determination o ICS: 71.040.40 |
2 | TZS 10,000/ USD 10 |
| TZS 2544-2:2020/ISO 17225-2:2014 | 2020 | Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets Determines the fuel quality classes and specifications of graded wood pellets for non-industrial and industrial use. ICS: 27.190 |
9 | TSHS 15,000/= USD 15 |
| TZS 2544-3:2020/ISO 17225-3 | 2020 | Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes Determines the fuel quality classes and specifications of graded wood briquettes. ICS: 27.190 |
6 | TSHS 15,000/= USD 15 |
| TZS 2267:2017 | 2018 | General purpose natural gas ― Specification Prescribes requirements, methods of sampling and test, calculation and interchangeability indices of natural gas for general purpose use. ICS: 75.060 |
24 | TZS 30,000/= USD 30 |
| TZS 2261: 2018 | 2018 | High performance engine lubricating oil for petrol engines Covers one type of engine lubricating oil suitable for the crankcase lubrication of spark-ignition engines of passenger cars (naturally aspirated or turbo charged), light duty trucks and hea ICS: 75.100 |
7 | TSHS 15,000/= USD 15 |
| TZS 2260: 2018 | 2018 | High performance engine lubricating oil for diesel engines Covers the type of engine lubricating oil suitable for the lubrication of heavy duty naturally aspirated, turbo-charged or super-charged compression-ignition engines that operate under the c ICS: 75.100 |
7 | TSHS 15,000/= USD 15 |
| TZS 2416: 2020 | 2020 | Lamb and mutton carcasses and meat cuts — Specification Prescribes the requirements, sampling and test methods for fresh and frozen lamb and mutton carcasses and meat cuts intended for human consumption. ICS: 67.120.10 |
8 | TSHS 15,000/= USD 15 |
| TZS 2346-9: 2019- ISO 14520-9: 2016 | 2019 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227 ea extinguishant Contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safet ICS: 13.220.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 2547: 2020- ISO 5718: 2013 | 2020 | Harvesting equipment — Blades for agricultural rotary mowers — Requirements Specifies requirements for blades used on rotary disk mowers and rotary drum mowers, mounted, semi-mounted, trailed, or self-propelled, as used for forage crop harvesting in agriculture only ICS: 65.060.50 |
8 | TSHS 15,000/= USD 15 |
| TZS 2493: 2020- ISO 13959: 2014 | 2020 | Water for haemodialysis and related therapies Specifies minimum requirements for water to be used in haemodialysis and related therapies ICS: 11.040.40 |
16 | TSHS 25,000/= USD 25 |
| TZS 2492: 2020- ISO 8359: 1996 | 2020 | Oxygen concentrators for medical use — Safety requirements Specifies safety requirements for continuous-flow oxygen concentrators, as defined in 1.3.8 (in this International Standard). This International Standard does not apply to oxygen concentrato ICS: 11.040.10 |
24 | TSHS 30,000/= USD 30 |
| TZS 2491: 2020- ISO 15197: 2013 | 2020 | In vitro diagnostic test systems — Requirements for bloodglucose monitoring systems for self-testing in managing diabetes mellitus Specifies requirements for in vitro glucose monitoring systems that measure glucose concentrations in capillary blood samples, for specific design verification procedures and for the validat ICS: 11.100.10 |
46 | TSHS 55,000/= USD 55 |
| TZS 2490: 2020- ISO 23640: 2011 | 2020 | In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents Applicable to the stability evaluation of in vitro diagnostic medical devices, including reagents, calibrators, control materials, diluents, buffers and reagent kits, hereinafter called IVD ICS: 11.100.10 |
7 | TSHS 15,000/= USD 15 |
| TZS 2074-3: 2017 | 2017 | Glossary of mining terms — Part 3: Drilling and blasting Covers the definition of terms used in mining industry in connection with drilling and blasting. ICS: 01.040.73 |
23 | TZS 30,000/= USD 30 |
| TZS 2279: 2018- EAS 887: 2017 | 2018 | Crude and semi refined palm oil — Specification Specifies the requirements, sampling and test methods for crude and semi refined (neutralized and/or bleached) palm oil derived from the fleshy mesocarp of the fruit of oil palm (Elaeis guin ICS 67.200.10 |
4 | TZS 10,000/ USD 10 |
| TZS 2227: 2018- ISO 12824: 2016 | 2018 | Royal jelly — Specification Specifies the production and sanitary requirements for royal jelly and establishes a series of organoleptic and chemical test methods to control royal jelly quality. It also specifies the re ICS: 67.180.10 |
35 | TZS 40,000/ USD 40 |
| TZS 2307-5: 2019- ISO 5167-5: 2016 | 2019 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters Specifies the geometry and method of use (installation and operating conditions) of cone meters when they are inserted in a conduit running full to determine the flow rate of the fluid flowi ICS: 17.120.10 |
15 | TZS 20,000/ USD 20 |
| TZS 2344-5: 2019- ISO 15874-5: 2013 | 2019 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system Specifies the characteristics of the fitness for purpose of polypropylene (PP) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of ICS: 23.040.20 |
10 | TSHS 15,000/= USD 15 |
| TZS 2346-10: 2019- ISO 14520-10: 2016 | 2019 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant Contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. It includes details of physical properties, specification, usage and safety ICS: 13.220.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 2190-3: 2018- ISO 6182-3: 2012 | 2018 | Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves Specifies performance, requirements, methods of test and marking requirements, for dry pipe valves and manufacturer’s specified relevant trim used in dry pipe automatic fire protection syste ICS: 13.220.20 |
19 | TSHS 25,000/= USD 25 |
| TZS 2190-7: 2019- ISO 6182-7: 2004 | 2019 | Fire protection — Automatic sprinkler systems — Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers Specifies performance requirements, test methods and marking requirements for fusible element and glass-bulb early suppression fast response (ESFR) sprinklers. It is applicable to ESFR spri ICS: 13.220.20 |
40 | TSHS 55,000/= USD 45 |
| TZS 2190-10: 2019- ISO 6182-10: 2014 | 2019 | Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers Specifies performance requirements, test methods, and marking requirements for domestic sprinklers. These sprinklers are intended to provide control of fires in domestic occupancies, to prev ICS: 13.220.20 |
54 | TZS 60,000/= USD 60 |
| TZS 2307-4: 2019- ISO 5167-4: 2003 | 2019 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes Specifies the geometry and method of use (installation and operating conditions) of Venturi tubes when they are inserted in a conduit running full to determine the flowrate of the fluid flo ICS: 17.120.10 |
24 | TZS 30,000/= USD 30 |
| TZS 2307-3: 2019- ISO 5167-3: 2003 | 2019 | Measurement of fluid flow by means of pressure differential devices inserted in circular-cross section conduits running full — Part 3: Nozzles and Venturi nozzles Specifies the geometry and method of use (installation and operating conditions) of nozzles and Venturi nozzles when they are inserted in a conduit running full to determine the flowrate of ICS: 17.120.10 |
30 | TSHS 35,000/= USD 35 |
| TZS 2307-2: 2019- ISO 5167-2: 2003 | 2019 | Measurement of fluid flow by means of pressure differential devices inserted in circular-cross section conduits running full — Part 2: Orifice plates Specifies the geometry and method of use (installation and operating conditions) of orifice plates when they are inserted in a conduit running full to determine the flowrate of the fluid fl ICS: 17.120.10 |
47 | TSHS 55,000/= USD 55 |
| TZS 2307-1: 2019- ISO 5167-1: 2003 | 2019 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements Defines terms and symbols and establishes the general principles for methods of measurement and computation of the flowrate of fluid flowing in a conduit by means of pressure differential ICS: 17.120.10 |
33 | TZS 40,000/ USD 40 |
| TZS 2190-11: 2019- ISO 6182-11: 2003 | 2019 | Fire protection — Automatic sprinkler systems — Part 11: Requirements and test methods for pipe hangers Specifies performance requirements, test methods and marking requirements for pipe hangers. ICS: 13.220.20 |
13 | TZS 20,000/= USD 20 |
| TZS 2346-8: 2019- ISO 14520-8: 2016 | 2019 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant This document contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, u ICS: 13.220.20 |
8 | TSHS 15,000/= USD 15 |
| TZS 2344-2: 2019- ISO 15874-2: 2013 | 2019 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes Specifies the requirements of pipes made from polypropylene (PP) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whet ICS: 23.040.20 |
18 | TSHS 25,000/= USD 25 |
| TZS 2344-3: 2019- ISO 15874-3: 2013 | 2019 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings Specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, wheth ICS: 23.040.20 ISO 15874-3: 2013 |
15 | TSHS 20,000/= USD 20 |
| TZS 2344-1: 2019- ISO 15874-1: 2013 | 2019 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General Specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intend ICS: 23.040.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 1015: 2017 (2nd Ed)- ISO 5315: 1984 | 2017 | Fertilizers — Determination of total nitrogen content — Titrimetric method after distillation Specifies a titrimetric method, after distillation, for the determination of the total nitrogen content of fertilizers in all forms, including those which have to be digested ICS: 65.080 |
5 | TZS 10,000/= USD 10 |
| TZS 2532:2020 | 2020 | Hospital based intravenous fluids production ― Code of practice Lays down the recommendations for layout and general practice in hospital-based infusion production units ICS: 11.120.01 |
10 | TSHS 15,000/= USD 15 |
| TZS 2531:2020 | 2020 | Industrial denatured spirit ― Specification Specifies requirements and methods of sampling and test for industrial denatured spirits. It does not apply to material for medicinal and food purposes. ICS: 71.080.60 |
12 | TSHS 20,000/= USD 20 |
| TZS 2530:2020 | 2020 | Ethanol for Industrial use ― Specification Specifies requirements and methods of sampling and test for ethanol suitable for industrial use. It does not apply to material for medicinal and food purposes. ICS: 71.080.60 |
11 | TSHS 20,000/= USD 20 |
| TZS 2537-11:2020/ISO 21940-11:2016 | 2020 | Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour Establishes procedures and unbalance tolerances for balancing rotors with rigid behaviour. It specifies a) the magnitude of the permissible residual unbalance, b) the necessary number of c ICS: 91.120.40 ISO 21940-11:2016 |
28 | TSHS 35,000/= USD 35 |
| TZS 2526-8:2020 /ISO 1388-8:1981 | 2020 | Ethanol for industrial use ― Methods of test ― Part 8: Determination of methanol content (methanol contents between 0.10 and 1.5 % (v/v)) ― Visual colorimetric method Specifies a visual colorimetric method for the determination of the methanol content of ethanol for industrial use. The method is applicable to products having methanol contents between 0,lO ICS: 71.080.60 ISO 1388-8:1981 |
3 | TSHS 10,000/= USD 10 |
| TZS 2525-7:2020 /ISO 1388-7:1981 | 2020 | Ethanol for industrial use ― Methods of test ― Part 7: Determination of methanol content (methanol contents between 0.01 and 0.20 % (v/v)) ― Photometric method Specifies a photometric method for the determination of the methanol content of ethanol for industrial use. The method is applicable to products having methanol contents between 0,Ol and 0,2 ICS: 71.080.60 ISO 1388-7:1981 |
4 | TSHS 10,000/= USD 10 |
| TZS 2524-6:2020 ISO 1388-6:1981 | 2020 | Ethanol for industrial use ― Methods of test ― Part 6: Test for miscibility with water Specifies a test for miscibility with water of ethanol for industrial use. This document should be read in conjunction with ISO 1388/1 (sec the annex). ICS: 71.080.60 ISO 1388-6:1981 |
2 | TSHS 10,000/= USD 10 |
| TZS 2523-5:2020/ISO 1388-5:1981 | 2020 | Ethanol for industrial use ― Methods of test ― Part 5: Determination of aldehyde content ― Visual colorimetric method Specifies a visual calorimetric method for the determination of the aldehydes content of ethanol forindustrial use. The method is applicable to products having aldehyde contents, expressed a ICS: 71.080.60 ISO 1388-5:1981 |
3 | TSHS 10,000/= USD 10 |
| TZS 2522-2:2020 /ISO 1388-2:1981 | 2020 | Ethanol for industrial use ― Methods of test ― Part 2: Detection of alkalinity or acidity to phenolphthalein Specifies a method for the detection of alkalinity and, if appropriate, the subsequent determination of acidity of ethanol for industrial use. The method is applicable to products having aci ICS: 71.080.60 ISO 1388-2:1981 |
2 | TSHS 10,000/= USD 10 |
| TZS 2521: 2020/ ISO 2211: 1973 | 2020 | Liquid chemical products ― Measurement of colour in Hazen units (Platinum-cobalt scale) Specifies a method of measuring the colour in Hazen units of liquid chemical products. It is applicable only to clear, slightly coloured liquids for which the colour characteristics are clos ICS: 71.040.50 ISO 2211: 1973 |
2 | TSHS 10,000/= USD 10 |
| TZS 2520: 2020 ISO 759:1976 (??1981) | 2020 | Volatile organic liquids for industrial use ― Determination of dry residue after evaporation on water bath ― General method Specifies a general method for the determination of the dry residue, after evaporation on a water bath, of volatile organic liquids for industrial use. The method is applicable to products h 71.040.40 ISO 759:1976 (??1981) |
2 | TSHS 10,000/= USD 10 |
| TZS 2278: 2018 | 2018 | Raw cashew nut (in-shell) — Specification Specifies requirements, sampling and test methods for raw cashew nut obtained from the cashew tree (Anacardium occidentale, Linnaeus) for further processing. ICS: 67.080.10 |
6 | TSHS 15,000/= USD 15 |
| TZS 2359: 2019 | 2019 | Coal for cement manufacture — Specification Prescribes requirements and test methods for coal intended for cement manufacture. ICS: 73.040 |
2 | TSHS 10,000/= USD 10 |
| TZS 2311-1:2019/ISO 4437-1:2014 | 2019 | Plastics piping systems for the supply of gaseous fuels ― Polyethylene (PE) — Part 1: General Specifies the general properties of polyethylene (PE) compounds for the manufacture of pipes and fittings intended to be used for the supply of gaseous fuels ICS: 75.200 ISO 4437-1:2014 |
14 | TSHS 20,000/= USD 20 |
| TZS 2311-4:2019/ISO 4437-4:2015 | 2019 | Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves Specifies the characteristics of valves made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels. ICS: 75.200 ISO 4437-4:2015 |
16 | TSHS 25,000/= USD 25 |
| TZS 2311-5:2019/ISO 4437-5:2014 | 2019 | Plastics piping systems for the supply of gaseous fuels ― Polyethylene (PE) — Part 5: Fitness for purpose of the system Specifies the requirements of fitness for purpose of the polyethylene (PE) piping system to be used for the supply of gaseous fuels. ICS: 75.200 ISO 4437-5:2014 |
11 | TSHS 20,000/= USD 20 |
| TZS 2344-7: 2019- ISO 15874-7: 2018 | 2019 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity Gives requirements and guidance for the assessment of conformity of compounds, products, and assemblies in accordance with the applicable part(s) of ISO 15874 intended to be included in the ICS: 23.040.20 ISO 15874-7: 2018 |
18 | TSHS 25,000/= USD 25 |
| TZS 2360:2018/ISO 561:1989 | 2018 | Coal preparation plant ― Graphical symbols Specifies basic symbols for use in flowsheets (see ISO 924) and other diagrams relating to coal preparation plant. ICS: 73.040 ISO 561:1989 |
13 | TSHS 20,000/= USD 20 |
| TZS 2361:2018/ISO 924:1989 | 2018 | Coal preparation plant ― Principles and conventions for flow sheets Sets out principles and conventions for use in preparation of basic process and equipment flowsheets for the design of a coal preparation plant. In order to cover the various stages leading ICS: 73.040 ISO 924:1989 |
5 | TSHS 10,000/= USD 10 |
| TZS 2362:2018/ISO 20905:2004 | 2018 | Coal preparation — Determination of dust/moisture relationship for coal Sets out a laboratory procedure for the dust testing of higher rank coals. The procedure defines a means of evaluating the dust/moisture relationship characteristic of a coal and a dust exti ICS: 73.040 ISO 20905:2004 |
12 | TSHS 20,000/= USD 20 |
| TZS 2385:2019/ISO 12543-4:2011(E) | 2019 | Glass in building ― Laminated glass and laminated safety glass ― Part 4: Test methods for durability Specifies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building. ICS: 81.040.20 ISO 12543-4:2011 |
11 | TSHS 20,000/= USD 20 |
| TZS 2392:2019/ISO 8269:1985 | 2019 | Door sets ― Static loading test Specifies a method of testing the behaviour of doorsets under static loading. It applies to doorsets with one pivoting leaf, without fixed parts other than the door frame itself, and for wh ICS:91.060.50 ISO 8269:1985 |
6 | TSHS 15,000/= USD 15 |
| TZS 2393:2019/ISO 8271:2005 | 2019 | Door leaves — Determination of the resistance to hard body impact Specifies the method to be used to determine the damage caused to a door leaf by the impact of a hard body. ICS: 91.060.50 |
3 | TSHS 10,000/= USD 10 |
| TZS 2395:2019/ISO 8274-2005 | 2019 | Windows and doors ― Resistance to repeated opening and closing ― Test method Specifies the method to be used to determine the mechanical durability of doorsets and the opening parts of windows after a defined number of operating cycles. ICS: 91.060.50 ISO 8274-2005 |
9 | TSHS 15,000/= USD 15 |
| TZS 2394:2019/ISO 9381:2005 | 2019 | Hinged or pivoted doors ― Determination of the resistance to static torsion Specifies the method to be used to determine the permanent deformation caused when static stress in torsion is applied to an open door leaf fixed in its own door frame as part of a doorset. ICS: 91.060.50 ISO 9381:2005 |
3 | TSHS 10,000/= USD 10 |
| TZS 2263: 2018 - ISO 11520-2: 2001 | 2018 | Agriculture grain dryer — Determination of performance — General additional procedure and crop-specific requirements Specifies additional procedures and gives guidance for testing and evaluating the drying performance of continuous-flow and batch grain driers for specific grain crops including wheat, barle 65.040.20 |
102 | TSHS 110,000/= USD 110 |
| TZS 2253: 2018 - ISO 11520-1: 1997 | 2018 | Agriculture grain dryer — Determination of performance — General requirements Describes methods for evaluating the drying performance of continuous flow and batch grain driers. The methods specified are for determining the evaporation rate which the machines concerned ICS: 65.040.20 |
33 | TSHS 40,000/= USD 40 |
| TZS 2223: 2018 – ISO/IEC 19792: 2009 | 2018 | Information technology — Security techniques — Security evaluation of biometrics Specifies the subjects to be addressed during a security evaluation of a biometric system. It covers the biometric-specific aspects and principles to be considered during the security evalu ICS: 35.040 |
37 | TSHS 45,000/= USD 45 |
| TZS 2221-10-1: 2018 - IEC 60839-10-1: 1995 | 2018 | Alarm systems — Part 10: Alarm systems for road vehicles — Section 1: Passenger cars Specifies requirements and test methods for vehicle security alarm systems in tended for installation within vehicles used for the carriage of passengers and having not more than eight seats ICS: 43.040.20 |
28 | |
| TZS 2190-8: 2018- ISO 6182-8: 2006 | 2018 | Fire protection — Automatic sprinkler systems — Part 8: Requirements and test methods for pre-action dry alarm valves Specifies performance requirements, methods of test and marking requirements for pre-action dry alarm valves and manufacturers' specified relevant trim used in non-interlock pre-action autom ICS: 13.220.20 |
22 | TSHS 30,000/= USD 30 |
| TZS 2190-5: 2018- ISO 6182-5: 2012 | 2018 | Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves Specifies performance requirements, methods of test and marking requirements for deluge valves and manufacturer's specified relevant trim used in deluge and pre-action automatic fire protect ICS: 13.220.20 |
19 | TSHS 25,000/= USD 25 |
| TZS 2190-1: 2018- ISO 6182-1: 2014 | 2018 | Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinkler Specifies performance and marking requirements and test methods for conventional, spray, flat spray, and sidewall sprinklers. It is not applicable to sprinklers having multiple orifices. ICS: 67.140.10 |
68 | TSHS 75,000/= USD 75 |
| TZS 1476: 2017 | 2017 | Hot-dip aluminium-zinc coated plain, corrugated and troughed steel sheets — Specification Specifies the requirements for continuous hot-dip aluminium-zinc (AZ) coated plain, corrugated and troughed steel sheets for roofing, cladding, fabrication and general use. ICS 77.140.50 |
10 | TSHS 15,000/= USD 15 |
| TZS 448-2-29: 2021/ IEC 60335-2-29: 2016/AMDI:2019 | 2021 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers Deals with the safety of electric battery chargers for household and similar use having an output not exceeding 120 V ripple-free direct current, their rated voltage being not more than 250 ICS: 97.180 |
49 | |
| TZS 1985: 2017 | 2017 | Mixed masala — Specification Specifies the requirements and the methods of sampling and test for mixed masala which is used as a flavouring material for fish, chicken and meat. This standard is not applicable to curry p ICS: 67.220.10 |
6 | TSHS 15,000/= USD 15 |
| TZS 29: 2021/EAS 99:2019 | 2021 | Spices and condiments — Nomenclature Provides the list of botanical names of plants classified under spices and condiments. It also gives the part of the plant used, the common English and available Swahili names of spices and ICS 67.220.10 |
5 | TSHS 10,000/= USD 10 |
| TZS 1855: 2016- ISO 22743: 2006 | 2016 | Water quality — Determination of sulfates — Method by continuous flow analysis (CFA) Specifies a continuous flow analysis (CFA) method for the determination of sulfate in various types of water (such as ground water, drinking water and waste water). The method is applicable ICS: 13.060.01 |
10 | TSHS 15,000/= USD 15 |
| TZS 2217-12-10: 2018 - IEC 62908-12-10: 2017 | 2018 | Touch and interactive displays — Part 12-10: Measurement methods of touch displays — Touch and electrical performance Specifies the standard measuring conditions and methods for determining touch performance of a touch sensor module. This document is applicable to touch sensor modules, where the structural ICS: 31.120 |
34 | |
| TZS 2217-13-10: 2018 - IEC 62908-13-10: 2016 | 2018 | Touch and interactive displays — Part 13-10: Reliability test methods of touch displays — Environmental durability test methods Specifies the methods for testing the environmental durability of touch display modules, touch sensor modules and test pattern cells, and can be used for devices at the production level, the ICS: 31.120 |
16 | |
| TZS 2218-1-1: 2018 - IEC 61747-1-1: 2014 | 2018 | Liquid crystal display devices — Part 1-1: Generic — Generic specification Generic specification for liquid crystal display devices. It defines general procedures for testing and gives general rules for the measuring methods of the electrical and optical characteri ICS: 31.120 |
2 | |
| TZS 2219-4: 2018 - IEC 60268-4: 2014 | 2018 | Sound system equipment — Part 4: Microphones Specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details ICS: 33.160.50 |
54 | |
| TZS 2219-5: 2018 - IEC 60268-5: 2003 | 2018 | Sound system equipment — Part 5: Loudspeakers Applies to sound system loudspeakers, treated entirely as passive elements.Loudspeakers with built-in amplifiers are excluded.NOTE 1 The term “loudspeaker” used in this s ICS: 33.160.50 |
7 | |
| TZS 2220-1: 2018 - IEC 62209-1: 2016 | 2018 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices — Part 1: Devic Specifies protocols and test procedures for measurement of the peak spatial-average SAR induced inside a simplified model of the head with defined reproducibility. It applies to certain elec ICS: 33.060.20 |
236 | |
| TZS 2259-1: 2018 - ISO 15223-1: 2016 | 2018 | Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements Identifies requirements for symbols used in medical device labelling that convey information on the safe and effective use of medical devices. It also lists symbols that satisfy the requirem ICS: 11.040.01 |
25 | TSHS 30,000/= USD 30 |
| TZS 2255: 2018 - ISO 3183: 2012 | 2018 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems Specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleu ICS: 75.200 |
179 | TSHS 185,000/= USD 185 |
| TZS 2224-1: 2018 – ISO/IEC 19795-1: 2006 | 2018 | Information technology — Biometric performance testing and reporting — Part 1: Principles and framework Concerned with the evaluation of biometric systems in terms of error rates and throughput rates. Metrics for the various error rates in biometric enrolment, verification and identification a ICS: 35.040 |
56 | TSHS 65,000/= USD 65 |
| TZS 2190-6: 2018 - ISO 6182-6: 2006 | 2018 | Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves Specifies performance requirements, methods of test and marking requirements for check valves used in automatic fire protection systems. ICS: 13.220.20 |
13 | TSHS 20,000/= USD 20 |
| TZS 1120: 2018 – ISO 14050: 2009 | 2018 | Environmental management — Vocabulary Defines terms of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards. ICS: 13.020.10 |
169 | TSHS 175,000/= USD 175 |
| TZS 1966: 2017 | 2017 | Stingless bee honey — Specification Specifies requirements, methods of sampling and tests for stingless bee honey produced by subfamily Meliponinae of genera Melipona, Scaptotrigona and Trigona intended for direct human consum ICS: 67.180.10 |
15 | TSHS 20,000/= USD 20 |
| TZS 1921: 2016 | 2016 | Beehives — Specification Prescribes the requirements for Type A, Type B and Type C beehives. ICS: 65.140 |
20 | TSHS 25,000/= USD 25 |
| TZS 1768: 2015 | 2015 | Code of practice for production, processing and handling of coffee beans Prescribes a Code of practice for production, processing and handling of coffee beans both Robusta and Arabica intended for human consumption. ICS: 67.140.20 |
12 | TSHS 20,000/= USD 20 |
| TZS 2308: 2019 | 2019 | Sluice valve for water works purposes (50 to 1 200 mm size) — Specification Cover requirement for non-rising stem type sluice valves from 50 to 1 200 mm sizes used for water supply up to 45 °C and having double flanged ends for connections. ICS: 17.120.10 |
22 | TSHS 30,000/= USD 30 |
| TZS 2010: 2017 | 2017 | Automotive maintenance workshop — Requirements Gives general requirement and technical parameters of basic types of garage and its equipment. ICS: 43.040.70 |
18 | TSHS 25,000/= USD 25 |
| TZS 2390:2019/ISO 16293-2:2017 | 2019 | Glass in building — Basic soda lime silicate glass products — Part 2: Float glass Specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass for use in building, as defined in ISO 16293‑1. ICS: 81.040.20 |
12 | TSHS 20,000/= USD 20 |
| TZS 2345-2: 2019- ISO 21138-2: 2007 | 2019 | Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene Specifies the definitions and requirements for pipes with a smooth external surface (Type A), fittings and systems based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and ICS: 23.040.20 |
41 | TSHS 50,000/= USD 50 |
| TZS 2336: 2019 | 2019 | Acoustic — General tolerance limits for underwater noise Sets out general tolerance limits for underwater noise as a results of human activities (Anthropogenic) The standard identify and categorize all the sources of underwater noise into main thr ICS: 17.140.01 |
6 | TSHS 15,000/= USD 15 |
| TZS 2327-1: 2019 | 2019 | Aerial bundled conductor systems — Part 1: General requirements and method of test Covers requirements and method of test for cores consisting of stranded conductors that are insulated with crosslinked polyethylene (XLPE) and that are intended for use in aerial bundled con 29.060.20 |
43 | TSHS 50,000/= USD 50 |
| TZS 2304:2018 | 2018 | Footwear ― Sportswear ― Specification Prescribes the performance requirements of sports footwear for all sports regardless of design and materials. ICS:13.340.50 |
10 | TSHS 15,000/= USD 15 |
| TZS 2297: 2018- EAS 890: 2018 | 2018 | Blended edible oils — Specification Specifies the requirements, sampling and test methods for blended edible oils of plant origin intended for human consumption. ICS 67.200.10 |
3 | TSHS 10,000/= USD 10 |
| TZS 2296: 2018- EAS 889: 2018 | 2018 | Groundnuts for oil extraction — Specification Specifies the requirements, sampling and test methods for groundnuts of the fruit of the plant Arachis hypogea intended for oil extraction. NOTE Groundnuts may also be referred to as shelle ICS: 67.200.10 |
4 | TSHS 10,000/= USD 10 |
| TZS 2207: 2018 | 2018 | Milk powder and cream powder — Specification Prescribes the requirements, methods of sampling and test for whole milk powder, partially skimmed milk powder, skimmed milk powder and cream powder intended for human consumption. ICS: 67.100.10 |
7 | TSHS 15,000/= USD 15 |
| TZS 2225: 2018 | 2018 | Sugar cane syrup — Specification Specifies the requirements, methods of sampling and test for sugar cane syrup intended to be used as raw material in food and other industries such as catering purposes, soft drinks and ph ICS: 67.180.10 |
4 | TSHS 10,000/= USD 10 |
| TZS 2226: 2021/EAS 989:2020 | 2021 | Bee pollen — Specification Specifies the requirements, sampling and test methods for bee pollen intended for human consumption. ICS 67.180.10 |
6 | TSHS 15,000/= USD 15 |
| TZS 2270: 2020- ISO 6327: 1981 | 2020 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers Describes hygrometers which determine the water content of a gas by detecting water vapour condensation occurring on a cooled surface or by checking the stability of the condensation on this ICS: 75.060 |
5 | TSHS 10,000/= USD 10 |
| TZS 2271-3: 2020- ISO 6974-3: 2018 | 2020 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to Describes the precision that can be expected from the gas chromatographic method that is set up in accordance with ISO 6974-1. The stated precision provides values for the magnitude of varia ICS: 75.060 |
11 | TSHS 20,000/= USD 20 |
| TZS 2272: 2020- ISO 6976: 2016 | 2020 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition Specifies methods for the calculation of gross calorific value, net calorific value, density, relative density, gross Wobbe index and net Wobbe index of natural gases, natural gas substitute ICS: 75.060 |
57 | TSHS 65,000/= USD 65 |
| TZS 2273-2: 2020- ISO 10101-2: 1993 | 2020 | Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure Specified is passing a measured volume of gas through a cell containing a relatively small volume of absorbent solution. Water in the gas is extracted by the absorbent solution and subsequen ICS: 75.060 |
7 | TSHS 15,000/= USD 15 |
| TZS 2273-3: 2020- ISO 10101-3: 1993 | 2020 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure Specifies general requirements for the determination. The principle of the method is reaction of water present in the test sample with iodine and sulfur-dioxide in a pyridine/methanol mixtur ICS: 75.060 |
6 | TSHS 15,000/= USD 15 |
| TZS 2274: 2020- ISO 10715: 1997 | 2020 | Natural gas — Sampling guidelines Provide concise guidelines for the collection, conditioning and handling of representative samples of processed natural gas streams. It also contains guidelines for sampling strategy, probe ICS: 75.060 |
39 | TSHS 45,000/= USD 45 |
| TZS 2275: 2020- ISO 23874: 2006 | 2020 | Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation Describes the performance requirements for analysis of treated natural gas of transmission or pipeline quality in sufficient detail so that the hydrocarbon dewpoint temperature can be calcul ICS: 75.060 |
26 | TSHS 35,000/= USD 35 |
| TZS 2276: 2020- ISO 19739: 2004 | 2020 | Natural gas — Determination of sulfur compounds using gas chromatography Specifies the determination of hydrogen sulfide, carbonyl sulfide, C1 to C4 thiols, sulfides and tetrahydrothiophene (THT) using gas chromatography (GC). Depending on the method chosen from ICS: 75.060 |
55 | TSHS 60,000/= USD 60 |
| TZS 2372: 2020- EAS 902: 2018 | 2020 | Bulk Liquefied Petroleum Gas (LPG) road tankers — Assembling — Requirements Specifies requirements for vehicle, equipment, accessories and assembling thereof used to form a bulk LPG road tanker for safe transportation, filling, and discharge operations. ICS: 43.080.10 |
32 | TSHS 40,000/= USD 40 |
| TZS 2373: 2020- EAS 903: 2018 | 2020 | Road tankers — Welded steel tanks for Liquefied Petroleum Gas (LPG) — Design and manufacture Specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker tanks and their welded attachments manufactured from carbo ICS: 23.020.20 |
53 | TSHS 60,000/= USD 60 |
| TZS 2374-1: 2020- EAS 924-1: 2018 | 2020 | Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 1: Storage and filling sites for refillabl Gives guidelines for the location, installation and operations of storage and filling sites for refillable liquefied petroleum gas (LPG) containers of capacity not exceeding 150 l. ICS: 75.160.30 |
16 | TSHS 25,000/= USD 25 |
| TZS 2374-2: 2020- EAS 924-2: 2018 | 2020 | Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice — Part 2: LPG installations involving gas storage Gives guidelines for the layout, design and installation of butane, propane and LPG equipment and of storage vessels of combined water capacity not exceeding 9 000 L. These guidelines cover ICS: 75.160.30 |
29 | TSHS 35,000/= USD 35 |
| TZS 2375: 2020- EAS 925: 2018 | 2020 | Inspection and testing of Liquefied Petroleum Gas (LPG) road tankers Specifies minimum requirements for the inspection and testing of the LPG road tanker which includes its tank, tank accessories and vehicle LPG equipment. NOTE There is no upper limit for th ICS: 43.080.10; |
11 | TSHS 20,000/= USD 20 |
| TZS 2545-2: 2020- ISO 6689-2: 1997 | 2020 | Equipment for harvesting — Combines and functional components — Part 2: Assessment of characteristics and performance defined in vocabulary Specifies the methods and requirements in assessing the dimensions and performance of a combine and its functional components as defined in ISO 6689-1. It also allows comparison of combine p ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
| TZS 2546-1: 2020- ISO 8909-1: 1994 | 2020 | Forage harvesters — Part 1: Vocabulary Specifies, in English and French, 70 terms and definitions relating to forage harvesters and their component parts: general terms, characteristics of functional components, machine and funct ICS: 65.060.50 |
17 | TSHS 25,000/= USD 25 |
| TZS 2546-2: 2020- ISO 8909-2: 1994 | 2020 | Forage harvesters — Part 2: Specification of characteristics and performance Specifies the methods and requirements in assessing the dimensions and performance of a forage harvester, as defined in ISO 8909-1, and its functional components. Also allows comparison of f ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
| TZS 2566-2: 2020- ISO 17089-2: 2012 | 2020 | Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 2: Meters for industrial applications Specifies requirements and recommendations for ultrasonic gas meters (USMs), which utilize acoustic signals to measure the flow in the gaseous phase in closed conduits. ICS: 17.120.10 |
38 | TSHS 45,000/= USD 45 |
| TZS 2548: 2020- ISO 17103: 2009 | 2020 | Agricultural machinery — Rotary disc mowers, rotary drum mowers and flail mowers — Test methods and acceptance criteria for protective skirts Specifies requirements and acceptance criteria for testing the protective skirts of rotary disc mowers, rotary drum mowers and flail mowers used in agriculture. ICS: 65.060.50 |
4 | TSHS 10,000/= USD 10 |
| TZS 2335: 2019 | 2019 | Tolerance limits for industrial effluents discharged into land and receiving water bodies — Oil and gas industry Specifies the applicable limits to effluents discharged from the oil and gas industry directly into land and receiving water bodies. The effluent parameters contained herein include physical ICS: 13.060.30 |
9 | TSHS 15,000/= USD 15 |
| TZS 2286: 2018- ISO 21102: 2013 | 2018 | Adventure tourism — Leaders — Personnel competence This Technical Report indicates what the market normally considers as desirable competencies and the related expected results of competencies for adventure tourism activity leaders common to ICS: 03.200 |
8 | TSHS 15,000/= USD 15 |
| TZS 2285: 2018- ISO 21101: 2014 | 2018 | Adventure tourism — Safety management systems — Requirements Outlines the requirements of a safety management system for adventure tourism activity providers. A provider can use this International Standard for the following: a) to enhance safety perf ICS: 03.200 |
22 | TSHS 30,000/= USD 30 |
| TZS 2284: 2018- ISO 18513: 2003 | 2018 | Tourism services — Hotels and other types of tourism accommodation — Terminology Defines terms used in the tourism industry in relation to the various types of tourism accommodation and other related services. ICS: 01.040.03 |
11 | TSHS 20,000/= USD 20 |
| TZS 2283: 2018- ISO 12818: 2013 | 2018 | Glass packaging — Standard tolerances for flaconnage Specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. ICS: 55.100 |
9 | TSHS 15,000/= USD 15 |
| TZS 2282: 2018- ISO 73: 2009 | 2018 | Risk management — Vocabulary Provides the definitions of generic terms related to risk management. It aims to encourage a mutual and consistent understanding of, and a coherent approach to, the description of activities ICS: 01.040.03 |
8 | TSHS 15,000/= USD 15 |
| TZS 2281: 2018- ISO 17021-1: 2015 | 2018 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements Contains principles and requirements for the competence, consistency and impartiality of bodies providing audit and certification of all types of management systems. ICS: 03.120.20 |
48 | TSHS 55,000/= USD 55 |
| TZS 2280: 2018 (1st Ed) ISO /IEC 17025: 2017 | 2018 | General requirements for the competence of testing and calibration laboratories Specifies the general requirements for the competence to carry out test and/or calibration, including sampling. It coves testing and calibration performed using standard methods, non-standar ICS: 03.120.20 |
30 | TSHS 35,000/= USD 35 |
| TZS 2265: 2018 | 2018 | Solid waste management — Non-hazardous waste Specifies requirements to non hazardous - solid waste discharge from homes, institutions, industries and bussiness areas. It covers all stages from generation, segregation, collection, trans ICS: 13.030.10 |
5 | TSHS 10,000/= USD 10 |
| TZS 2216-2: 2018- ISO 11479-2: 2011 | 2018 | Glass in building — Coated glass — Part 2: Colour of facade Specifies a method for objective evaluation of the colour of coated glass when used in facades and viewed from the outside, as well as for measuring colour differences within the same glass ICS: 81.040.20 |
7 | TSHS 15,000/= USD 15 |
| TZS 2215-1: 2018- ISO 11479-1: 2011 | 2018 | Glass in building — Coated glass — Part 1: Physical defects Specifies optical quality requirements for coatings applied to glass using either pyrolytic, sol-gel or vacuum (sputtering) deposition methods for use in building glazing. More specifical ICS: 81.040.20 |
7 | TSHS 15,000/= USD 15 |
| TZS 2214-5: 2018- ISO 13007-5: 2015 | 2018 | Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath c Gives terminology concerning the products, and specifies test methods (see Annex A) and values of performance requirements, for liquid-applied waterproofing products associated with tile adh ICS: 91.100.23 |
19 | TSHS 25,000/= USD 25 |
| TZS 2184: 2018 | 2018 | Pork carcasses and cuts — Specification Prescribes the requirements, methods of sampling and test for Pork carcasses and cuts. ICS: 67.120 |
7 | TSHS 15,000/= USD 15 |
| TZS 2181: 2018 | 2018 | Chicken meat (raw and spiced) — Specification Prescribes the requirements, sampling and test methods for raw and/or spiced chicken “Gallus domesticus” meat carcasses or cuts intended for human consumption. It covers raw and/or spiced fr ICS: 67.120.20, |
10 | TSHS 15,000/= USD 15 |
| TZS 2179-7: 2018 ISO 710-7: 1984 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols Series of documents on graphical symbols for use on detailed maps, plans and geological cross-sections, comprises the following parts: ICS: 01.080.01, |
10 | TSHS 15,000/= USD 15 |
| TZS 2179-6: 2018 ISO 710-6: 1984 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks Provides a series of graphical symbols to represent on a map, plan or geological cross-section, rocks which have originated as the result of contact metamorphism, of metasomatic, pneumatolyt ICS: 01.080.01, |
4 | TSHS 10,000/= USD 10 |
| TZS 2179-5: 2018 ISO 710-5: 1989 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks Provides a unified series of Symbols and abbreviations for the representation of certain minerals often found in rocks, with a view to facilitating the characterization of certain rocks on d ICS: 01.080.01, |
3 | TSHS 10,000/= USD 10 |
| TZS 2179-4: 2018- ISO 710-4: 1982 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks Provides a series of symbols and orna- ments for the representation of metamorphic rocks on detailed maps, especially large-scale maps, plans, and geological cross- sections. ICS: 01.080.01 |
4 | TSHS 10,000/= USD 10 |
| TZS 2179-3: 2018- ISO 710-3: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks Provides a series of symbols and ornaments for the representation of magmatic rocks on detailed maps, especially large-scale maps, plans and geological cross-sections. ICS: 01.080.01, |
6 | TSHS 15,000/= USD 15 |
| TZS 2179-2: 2018 ISO 710-2: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks Provides a unified series of symbols and ornaments for the representation of sedimentary rocks on detailed maps, plans and geological c r oss-sec t i on s. ICS: 01.080.01 |
7 | TSHS 15,000/= USD 15 |
| TZS 2179-1: 2018 ISO 710-1: 1974 | 2018 | Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation General rules for the representation of rocks and minerals on detailed maps, plans and geological cross-sections. Particular symbols and ornaments for rocks and minerals are given in the rel ICS: 01.080.01 |
1 | TSHS 10,000/= USD 10 |
| TZS 2540:2020/ISO 3744:2010 | 2020 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane Specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping the noise source (machinery or equ ICS: 17.140.01 |
78 | TSHS 85,000/= USD 85 |
| TZS 2538-6:2020/ISO 10816-6:1995 | 2020 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW Specifies the general conditions and procedures for the measurement and evaluation of vibration, using measurements made on the non-rotating parts of machines with power ratings above 100 kW ICS: 17.160 |
10 | TSHS 15,000/= USD 15 |
| TZS 2538-3:2020/ISO 10816-3:2009 | 2020 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min Gives criteria for assessing vibration measurements when made in situ. The criteria specified apply to machine sets having a power above 15 kW and operating speeds between 120 r/min and 15 0 ICS: 17.160 |
12 | TSHS 20,000/= USD 20 |
| TZS 2536:2020/ISO 3746:2010 | 2020 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane Specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping a noise source (machinery or equip ICS: 17.140.01 |
48 | TSHS 55,000/= USD 55 |
| TZS 2535-1:2020/ISO 717-1:2013 | 2020 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation Defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different soun ICS: 91.120.20 |
18 | TSHS 25,000/= USD 25 |
| TZS 2534-4:2020/ISO 12749-4:2015 | 2020 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing Lists unambiguous terms and definitions for concepts for dosimetry related to radiation processing using gamma radiation, X-radiation, or accelerated electrons. It is intended to facilitate ICS: 01.140.13 |
29 | TSHS 35,000/= USD 35 |
| TZS 2518:2020/ISO 18227:2014 | 2020 | Soil quality — Determination of elemental composition by X-ray fluorescence Specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, and soil-like material by energy dispersive X-ray fluores ICS: 13.080.10 |
38 | TSHS 45,000/= USD 45 |
| TZS 2517:2020/ISO 18105:2014 | 2020 | Soil quality — Detection of water soluble chromium(VI) using a ready-to-use test-kit method Describes the procedure to screen soil samples to detect Cr(VI) using test-kits based on water extraction of Cr(VI) in soil. The test-kit approach in this method is designed to quickly scree ICS: 13.080.10 |
14 | TSHS 20,000/= USD 20 |
| TZS 2516:2020/ISO 14256-2:2005 | 2020 | Soil quality — Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution — Part 2: Automated method with segmented flow analysis Describes an automated method for the determination of nitrate, nitrite and ammonium in a 1 mol/l potassium chloride extract of field-moist soil samples. ICS: 13.080.10 |
12 | TSHS 20,000/= USD 20 |
| TZS 2515:2020/ISO 15192:2010 | 2020 | Soil quality — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection Specifies a method for the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to ICS: 13.080.10 |
23 | TSHS 30,000/= USD 30 |
| TZS 2514:2020/ISO 13914:2013 | 2020 | Soil quality — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS) Specifies a method for quantitative determination of 17 2,3,7,8-chlorine substituted dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls in sludge, treated biowaste ICS: 13.080.10 |
34 | TSHS 40,000/= USD 40 |
| TZS 2277:2020 | 2020 | Standard specification for methane thermophysical property tables Provides thermophysical property tables for methane. The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic and ICS: 75.160.30 |
11 | TSHS 20,000/= USD 20 |
| TZS 1499: 2021/ ISO 6632:1981 | 2021 | Fruits, vegetables and derived products – Sampling and methods of test – Part 13: Determination of volatile acidity Specifies a method for the deter- mination of volatile acidity in fruits, vegetables and derived products ICS 67.080.01 ISO 6632:1981 |
9 | Tshs 15,000/=, USD 15 |
| TZS 1498: 2021 (3rd Ed) -ISO 6557:1984 | 2021 | Fruits, vegetables and derived products – Sampling and methods of test – Part 12: Determination of ascorbic acid content - routine method Specifies two routine methods for the determination of the ascorbic acid content’) of fruits, vegetables and derived products ICS 67.080.01 ISO 6557:1984 |
4 | TZS 10,000/-USD 10 |
| TZS 1497: 2021 (3rd Ed) -ISO 5523:1981 | 2021 | Fruits, vegetables and derived products – Sampling and methods of test – Part 11: Liquid fruit and vegetable products – Determination of sulphur dioxide content (routine method) Specifies a routine method for the determination of the sulphur dioxide content of liquid fruit and vegetable products ICS 67.080.01 ISO 5523:1981 |
3 | TZS 10,000/-USD 10 |
| TZS 1496: 2016 (2nd Ed)- ISO 2173:2003 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 10: Determination of soluble solids Specifies a refractometric method for the determination of the soluble solids in fruit and vegetable products ICS 67.080.01 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1495: 2016 (2nd Ed)- ISO 7952:1994 | 2016 | Fruits, vegetables and derived products Sampling and methods of test – Part 9: Determination of copper content – Method using flame atomic absorption spectrometry Specifies a flame atomic absorption spectrometric method for the determi- nation of the topper content of fruits, vegetables and derived products ICS 67.080.01 |
5 | TZS 10,000/-USD 10 |
| TZS 1494: 2021 / ISO 5518:2007(4th Ed) | 2021 | Fruits, vegetables and derived products – Sampling and methods of test – Part 8: Determination of benzoic acid content – Spectrophotometric method Specifies a method for determining the benzoic acid content of fruits, vegetables and derived products ICS 67.080.01 ISO 5518:2007 |
5 | TZS 10,000/-USD 10 |
| TZS 1493: 2016 (2nd Ed)- ISO 5517:1978 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 7: Determination of iron content – 1, 10 - phenanthroline photometric method Specifies a 1,10-phenanthroline photometric method for the determination of the iron content of fruits, vegetables and derived products ICS 67.080.01 |
3 | TZS 10,000/-USD 10 |
| TZS 1492: 2021 (3rd Ed)- ISO 1842:1991 | 2021 | Fruit and vegetable products — Determination of pH Specifies a potentiometric method of measuring the pH. Describes the principle, the preparation of the test sample, the test procedure, the expression of results, and the contents of the tes ICS 67.080 ISO 1842:1991 |
2 | TZS 10,000/-USD 10 |
| TZS 1491: 2015 (2nd Ed) -ISO 1842:1991 | 2015 | Fruits, vegetables and derived products – Sampling and methods of test – Part 5: Determination of pH Specifies a potentio- metric method of measuring the pH of fruit and vegetable products ICS 67.080 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1490: 2016 (2nd Ed)- ISO 762:2003 | 2016 | Fruits, vegetables and derived products – Sampling and method of test – Part 4: Determination of mineral impurities content Specifies a method for the determination of the mineral impurities content (impurities generally originating from the soil) of fruit and vegetable products ICS 67.080.01 |
5 | TZS 10,000/-USD 10 |
| TZS 1489: 2016 (2nd Ed)- ISO 751:1998 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 3: Determination of water- insoluble solids content Specifies a method for the determination of the content of water-insoluble solids in the edible parts of fruit and vegetable products ICS 67.080.01 |
4 | TZS 10,000/-USD 10 |
| TZS 1488: 2016- ISO 750: 1998 | 2016 | Fruits, vegetables and derived products – Sampling and methods of test – Part 2: Determination of titratable acidy Specifies two methods for the determination of titratable acidity of fruits and vegetables products ICS. 67.080.01 |
4 | TZS 10,000/-USD 10 |
| TZS 1487: 2012 (1st Ed) | 2012 | Kashata – Specification Specifies requirements and methods of sampling and testing for Kashata intended for human consumption ICS 67.080.10 |
4 | TZS 10,000/-USD 10 |
| TZS 1486:2012 (1st Ed) | 2012 | Infant formula – Determination of phosphorus content by spectrophotometric method Prescribes method for determination of phosphorus content in infant formula. The method is also applicable in determining phosphorus content in enteral products ICS 67.020 |
5 | Tshs. 10,000/= USD 10 |
| TZS 1485: 2012 (1st Ed) | 2012 | Infant formula – Determination of mineral content by atomic absorption spectrophotometric method Prescribes method for the determination of mineral content in infant formula. The method is used in the determination of mineral content like calcium, magnesium, iron, zinc, copper, manganes ICS 67.020 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1484: 2012 (1st Ed) | 2012 | Milk based infant formula – Determination of vitamin A content by liquid chromatographic method Prescribes the method for the determination of Vitamin A content in milk based infant formula. The method is applicable to milk based infant formula containing more than 500 IU vitamin A per ICS 67.020 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1483: 2012 (1st Ed) | 2012 | Infant formula – Determination of total folates content by microbiological method Describes microbiological method for the determination of total folates in infant formula. The method is used in the determination of total folates in infant formula using the organism Lacto ICS: 07.100.30 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1482:2012(1st Ed) | 2012 | Containers for pharmaceutical dispensing – Specification for glass and plastics containers for solid dosage forms, semi-solids and powders Specifies requirements for materials, construction, capacity, neck finish and performance for glass and plastics containers and their closures intended for dispensing solid dosage forms, sem ICS: 55.120 |
16 | Tshs 25,000/= USD 25 |
| TZS 2196-13: 2018- ISO 13061-13: 2016 | 2018 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage Specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood. ICS: 79.040 |
4 | TSHS 10,000/= USD 10 |
| TZS 2156-4: 2018 - ARS 956-4: 2016 | 2018 | African traditional medicine — Medicinal plant standards — Calotropis procera Specifies requirements and related tests methods for Calotropis procera raw material to be used in consumer products including health, medicinal, veterinary and industrial products ICS: 11.120.10 |
45 | TSHS 50,000/= USD 50 |
| TZS 2156-3: 2018 - ARS 956-3: 2016 | 2018 | African traditional medicine — Medicinal plant standards — Urtica dioica and urtica urens Specifies requirements and related tests methods for Urtica dioica L. and Urtica urens L. raw material to be used in consumer products including health, medicinal and cosmetic products ICS: 11.120.10 |
52 | TSHS 60,000/= USD 60 |
| TZS 2156-2: 2018 - ARS 956-2: 2016 | 2018 | African traditional medicine — Medicinal plant standards —Ambrosia maritima Specifies requirements and related tests methods for Ambrosia maritima raw material to be used in consumer products including health, medicinal and industrial products. ICS: 11.120.10 |
17 | TSHS 25,000/= USD 25 |
| TZS 2156-1: 2018 - ARS 956-1: 2016 | 2018 | African traditional medicine — Medicinal plant standards —Aloe vera Specifies requirements and related tests methods for Aloe vera raw material to be used in consumer products including health, cosmetics, health food, medicinal, veterinary and industrial pro ICS: 11.120.10 |
45 | TSHS 50,000/= USD 50 |
| TZS 2155: 2018 - ARS 955: 2016 | 2018 | African traditional medicine — Technical guidelines for safety, efficacy and quality of raw materials and herbal medicines Provides technical guidelines to assure the safety, efficacy and quality of herbal raw materials and herbal medicines. ICS: 11.120.10 |
17 | TSHS 25,000/= USD 25 |
| TZS 2154: 2018 - ARS 954: 2016 | 2018 | African traditional medicine — Minimum requirements for registration of plant based traditional medicines Specifies minimum criteria for plant based traditional medicinal products on safety of use, quality and therapeutic efficacy to facilitate the registration, marketing and distribution of sta ICS: 11.120.10 |
22 | TSHS 30,000/= USD 30 |
| TZS 2153: 2018 - ARS 953: 2016 | 2018 | African traditional medicine — Certification scheme for medicinal plant produce Covers certification of medicinal plants produce both from cultivated and wild collected sources. Producers/collectors can achieve certification under any one of the two options described in ICS: 11.120.10 |
42 | TSHS 50,000/= USD 50 |
| TZS 2152: 2018 - ARS 952: 2016 | 2018 | African traditional medicine — Requirements on good agricultural and collection practices (GACP) for medicinal plants Provides guidelines aimed at advising medicinal plant producers and collectors on how to improve the safety, efficacy and quality standards of raw materials used in the production and prepar ICS: 11.120.10 |
37 | TSHS 45,000/= USD 45 |
| TZS 2151: 2018 - ARS 951: 2016 | 2018 | African traditional medicine — Good manufacturing practices (GMP) for herbal medicines Provides guidelines on good manufacturing practices aimed at ensuring the safety, efficacy and quality of herbal medicinal products for human consumption. ICS: 11.120.10 |
28 | TSHS 35,000/= USD 35 |
| TZS 2150: 2018 - ARS 950: 2016 | 2018 | African traditional medicine — Terms and terminology Provides the various terminologies on African medicinal plants, related herbal products as well as common terms on diseases and aims to ensure the safety, efficacy and quality of herbal med ICS: 11.120.10 |
9 | TSHS 15,000/= USD 15 |
| TZS 2147: 2018 - EAS 866: 2017 | 2018 | Paper sacks for packaging of cement — Specification. Specifies requirements, sampling and test methods for valve sewn-gusseted and valve-pasted ends paper sacks for packaging of cement ICS 85.080.99 |
9 | TSHS 15,000/= USD 15 |
| TZS 2149: 2018 - EAS 869: 2017 | 2018 | Wrapping paper — Specification Specifies requirements, sampling and test methods for wrapping paper ICS: 85.080.01, |
5 | TSHS 10,000/= USD 10 |
| TZS 2148: 2018 - EAS 867: 2017 | 2018 | Waxed paper for bread wrap — Specification. Specifies requirements, sampling and test methods for waxed paper for bread wrap. ICS: 85.080.01, |
15 | TSHS 20,000/= USD 20 |
| TZS 2146: 2018 - EAS 865: 2017 | 2018 | Corrugated fibreboard boxes for general packaging — Specification Specifies requirements, sampling and test methods for corrugated fibreboard boxes for general packaging. This standard does not include special treatment measures of the boxes in case of exp ICS: 85.080.30 |
17 | TSHS 25,000/= USD 25 |
| TZS 1480(Part 3): 2012(1st Ed) | 2012 | Food products – Veterinary drugs residues – Part 3: Determination of multiple sulfonamides residues in raw cow’s milk by Liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in cow’s milk ICS: 11.220 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2145: 2018 - EAS 860: 2017 | 2018 | Base paper for waxed bread wrap — Specification Specifies requirements, sampling and test methods for base paper for waxed bread wrap. ICS: 85.080.01 |
5 | TSHS 10,000/= USD 10 |
| TZS 1480 (Part 2): 2012 (1st Ed) | 2012 | residues Part 2: Determination of multiple tetracycline residues in cow’s milk by metal chelate affinity – Liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in cows’ milk ICS 11.220 |
9 | Tshs. 15,000/= USD 15 |
| TZS 1479: 2011 (1st Ed) | 2011 | Food products – Veterinary drugs residues – Part 1: Determination of tetracycline residues in edible animal tissues by liquid chromatographic method Prescribes procedures for the extraction and determination of veterinary drugs residues; in particular Chlortetracycline, Oxytetracycline and Tetracycline in Edible Animal Tissues by Liquid ICS 11.220 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1478: 2013 | 2013 | Protective helmets for motorcycle riders – Specification Specifies the requirements regarding material, construction, workmanship, finish, mass and performance for protective helmets (with or without lower face cover) for everyday use by motorcycl ICS: 13.340.20 |
26 | Tshs 35,000/= USD 35 |
| TZS 2144: 2018 - EAS 878: 2017 | 2018 | Antibacterial bathing bar — Specification Specifies the requirements, sampling and test methods for solid antibacterial bathing bars. This standard applies to antibacterial bathing bars supplied in the form of bars/cakes and produc ICS 77.100.40 |
30 | TSHS 35,000/= USD 35 |
| TZS 1477: 2020 - EAS 468: 2019 (3rd Ed) | 2020 | Pre-painted metal coated steel sheets and coils — Specifications Specifies requirements, sampling and test methods for pre-painted metal coated steel sheets and coils. ICS 77.140.50 |
17 | Tshs. 25,000/= USD 25 |
| TZS 1475: 2017 (2nd Ed) | 2017 | Sheet roof and wall covering – Aluminium alloy corrugated and troughed sheet Covers four types of straight corrugated, and six types of straight troughed aluminium alloy sheets ICS: 77.140.50 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2143: 2018 - EAS 877: 2017 | 2018 | Bathing bar — Specification This specifies requirements, sampling and test methods for bathing bars. This standard applies to bathing bars supplied in the form of bars/cakes and produced from vegetable or animal oils o ICS: 71.100.40, |
19 | TSHS 25,000/= USD 25 |
| TZS 1474: 2012 (1st Ed)- EAS 54:1999 | 2012 | Burnt building bricks – Specification Specifies building bricks of burnt clay, shale or brick earth for use in buildings for decoratives, structural and non-structural purposes. It also specifies sampling and testing methods ICS 91.100.10 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2142-9: 2018 | 2018 | Mini-grid systems — Part 9: Interconnection of less than 1 MW of generation with the national grid provides a framework within which consumers and mini-grid developers know what the minimum requirements are for service quality including service voltage level ranges at the consumer premise ICS: 29.240.20 |
9 | TSHS 15,000/= USD 15 |
| TZS 1473: 2011(1st Ed) IEC 60238:2008 | 2011 | Edison screw lampholders Applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in a.c. c ICS: 29.140.10 |
76 | |
| TZS 2142-8: 2018 | 2018 | Mini-grid systems — Part 8: Electricity metering-minimum accuracy and environmental requirements Specifies the minimum level of functionality requirements for three phase or single phase, total current, static kilowatt-hour (kWh) meters to be installed in distribution networks of mini-g ICS: 17.220.20, |
9 | TSHS 15,000/= USD 15 |
| TZS 2142-7: 2018 | 2018 | Mini-grid systems — Part 7: Underground power cables for rated voltages 0.6kV/1kV (Um 1.2kV) Covers minimum technical requirements for the design, manufacture, testing, supply, and performance of single and multicore armoured or unarmoured power cables rated 0.6/1 (1.2) kV U0/U (Um) ICS:29.060.20 |
5 | TSHS 10,000/= USD 10 |
| TZS 1472:2011(1st Ed-) IEC 61184:2008 | 2011 | Bayonet lampholders Applies to lampholders B15d and B22d for connected of lamps and semi-luminaires to a supply voltage of 250V. Also covers lampholders which are integral with a luminaires or intended to be bu ICS: 29.140.10 |
62 | |
| TZS 2142-6: 2018 | 2018 | Mini-grid system — Part 6: Aerial bundled cables (ABC) (0.6/1kV Covers minimum technical requirements for the design, manufacture, testing and supply of two, three, and four core twisted unsheathed cable rated 0.6/1 kV (Um=1.2kV) for use on 230/400V, 50 ICS: 29.060.20, |
8 | TSHS 15,000/= USD 15 |
| TZS 1471: 2018 (2nd Ed) | 2018 | Tolerance limits for environmental vibration Specifies limits for general environmental vibration including occupational environment and air overpressure. Tolerance limits in this Tanzania Standard are given with a view to protect peop ICS 13.020 |
10 | Tshs. 15,000/= USD 15 |
| TZS 2142-4: 2018 | 2018 | Mini-grid systems — Part 4: Low voltage (LV) underground distribution network Covers minimum technical requirements for the design and construction of underground low voltage, single phase and three-phase, power distribution networks for mini-grid systems. ICS: 29.240.01 |
14 | TSHS 20,000/= USD 20 |
| TZS 2142-3: 2018 | 2018 | Mini-grid systems — Part 3: Overhead lines for low voltage and medium voltage distribution networks Covers minimum technical requirements for the design and construction of overhead single phase and three phase power distribution networks to be used in mini-grid systems. This Tanzania Stan ICS: 29.240.20 |
54 | TSHS 60,000/= USD 60 |
| TZS 2142-2: 2018 | 2018 | Mini-grid systems — Part 2: Application of inverters Covers power electronics (primarily inverters), which are used to connect distributed generation equipment (specifically photovoltaic arrays and battery systems) to mini-grid power systems. ICS: 27.160, |
5 | TSHS 10,000/= USD 10 |
| TZS 2133: 2018- EAS 868: 2017 | 2018 | Natural and extensible sack Kraft paper — Specification Specifies requirements, sampling and test methods for natural and extensible sack Kraft paper. ICS: 85.080.01 |
3 | TSHS 10,000/= USD 10 |
| TZS1460:2017 (1st Ed)- ISO 10015:1999 | 2017 | Quality management - Guidelines for training Covers the development, implementation, maintenance, and improvement of strategies and systems for training that affect the quality of the products supplied by an organization ICS 03.120.10 |
20 | Tshs 25,000/= USD 25 |
| TZS 1459: 2011 (1st Ed)- ISO 10006: 2003 | 2011 | Quality management systems – Guidelines for quality management in projects Gives guidance on the application of quality management in projects. It is applicable to projects of varying complexity, small or large, of short or long duration, in different environments, ICS 03.120.10 |
35 | Tshs 40,000/= USD 40 |
| TZS 1458: 2021 (1st Ed)- ISO/TR 10013: 2001 | 2021 | Guidelines for quality management system documentation Provides guidance for the development and maintenance of the documented information necessary to support an effective quality management system, tailored to the specific needs of the organiz ICS 03.120.10 ISO/TR 10013: 2001 |
14 | Tshs 20,000/= USD 20 |
| TZS 1456: 2011 (1st Ed)- ISO 10007: 2003 | 2011 | Quality management systems – Guidelines for configuration management Gives guidance on the use of configuration management within an organization. It is applicable to the support of products from concept to disposal ICS 03.120.10 |
15 | Tshs 20,000/= USD 20 |
| TZS 1455:2011 (1st Ed) -ISO 10002:2004 | 2011 | Quality management – Customer Satisfaction-Guidelines for complaints handling in organizations Provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaints handlin ICS 03.120.10 |
30 | Tshs 35,000/= USD 35 |
| TZS 1454:2011 (1st Ed) -ISO 10012:2003 | 2011 | Measurement management systems - Requirements for measurement processes and measuring equipment Specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate complian ICS 03.120.10; 17.020 |
25 | Tshs. 30,000/= USD 30 |
| TZS 1453: 2011 (1st Ed) | 2011 | HIV and AIDS management system –General requirements Specifies general requirements for HIV and AIDS management systems (HAMS). It is applicable to any organization that wishes to establish, implement, maintain and improve an HIV and AIDS mana ICS 03.120.10 |
17 | Tshs 25,000/= USD 25 |
| TZS 1452-8: 2012(1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 8: Test methods for overall migration into olive oil by article filling Specifies test methods for the determination of the overall migration into fatty food simulants from plastic materials and articles by filling of test specimens with a fatty food simulant at ICS: 85.060 |
33 | Tshs 40,000/= USD 40 |
| TZS 1452-7: 2012 (1st Ed) | 2012 | Materials and Articles in contact with foodstuffs – Plastics – Part 7: Test methods for overall migration into aqueous food simulants using a pouch Specifies test methods for the determination of the overall migration into aqueous based food simulants from plastics which are intended to come into contact with foodstuffs, by forming the ICS 85.060 |
12 | Tshs. 20,000/= USD 20 |
| TZS 1452-6:2012 | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 6: Test methods for overall migration into olive oil using a pouch Specifies test methods for the determination of the overall migration into fatty food simulants from one surface only of plastics in the form of film or sheet, which is intended to come into ICS: 85.060 |
27 | Tshs 35,000/= USD 35 |
| TZS 1452-5: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 5: Test methods for overall migration into aqueous food simulants by cell Specifies test methods for the determination of the overall migration into aqueous based food simulants from one surface only of plastics, which are intended to come into contact with foodst ICS 67.250 |
9 | Tshs. 15,000/= USD 15 |
| TZS 1452-4: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 4: Test methods for overall migration into olive oil by cell Specifies test methods for the determination of the overall migration into fatty food simulants, from one surface only of plastics in the form of sheet and film at temperatures above 20°C an ICS 85.060 |
27 | Tshs 35,000/= USD 35 |
| TZS 1452-3: 2012 (1st Ed) | 2012 | Materials and Articles in contact with foodstuffs – Plastics - Part 3: Test methods for overall migration into aqueous simulants by total immersion Specifies test methods for the determination of the overall migration into aqueous based food simulants from plastics which are intended to come into contact with foodstuffs, by total immers ICS 67.250 |
11 | Tshs. 20,000/= USD 20 |
| TZS 1452-2: 2011 (1st Ed) | 2011 | Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion Describes test methods for the determination of the overall migration into fatty food simulants from plastics materials and articles, by total immersion of test specimens in a fatty food sim ICS 67.250 |
28 | Tshs 35,000/= USD 35 |
| TZS 1452-1: 2011 (1st Ed) | 2011 | Materials and articles in contact with the food staffs - Plastics – Part 1: Guide to the selection of conditions and test methods for overall migration Provides a guide to the selection of the appropriate conditions and test methods for the determination of overall migration into food simulants and test media from plastics which are intende ICS 55.040 |
45 | Tshs 50,000/= USD 50 |
| TZS 1451;2011- ISO/IEC 27000: 2009 | 2011 | Information technology – Security techniques – Information security management systems – Overview and vocabulary Provides: a) an overview of the ISMS family of standards; • b) an introduction to information security management systems (ISMS); • c) a brief description of the Plan-Do-Check-Act (PDCA) p ICS: 01.040.35 |
19 | Tshs 25,000/= USD 25 |
| TZS 1450:2011- ISO 18902: 2007 | 2011 | Imaging materials – Processed imaging materials – Albums, framing and storage materials Specifies the principal physical and chemical requirements for filing enclosures, containers, albums and frames, particularly designed for storing wet or dry processed films, plates and pape ICS: 37.040.20 |
15 | Tshs. 20,000/= USD 20 |
| TZS 1449:2011- ISO 11108: 1996 | 2011 | Information and documentation – Archival paper – Requirements for permanence and durability Specifies the requirements for archival paper. It is applicable to unprinted papers intended for documents and publications required for permanent retention and frequent use. For these docum ICS: 01.040.20 |
4 | Tshs 10,000/= USD 10 |
| TZS 1448:2011- ISO 16245: 2009 | 2011 | Information and documentation – Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents Specifies requirements for boxes and file covers, made of cellulosic material, to be used for long term storage of documents on paper or parchment. It is applicable to boxes made of solid or ICS: 01.040.20 |
7 | Tshs. 15,000/= USD 15 |
| TZS1447:2011- ISO/IEC 27001: 2005 | 2011 | Information technology - Security techniques information security management systems - Requirements Specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a documented ISM within the context of the organization’s overall busin ICS 35.040 |
34 | Tshs 40,000/= USD 40 |
| TZS 1446: 2011-ISO 5564: 1982 | 2011 | Black pepper and white pepper, whole or ground – Determination of piperine content – Spectrophotometric method Specifies a spectrophotometric method for the determination of the piperine content of black or white pepper (Piper nigrum L), in whole or in ground form ICS 67.220.10 |
2 | TZS 10,000/-USD 10 |
| TZS 1445: 2011- ISO 3165:1976 | 2011 | Sampling of chemical products for industrial use –Safety in sampling Gives the recommendations relating to safety in the sampling of chemical products for industrial use ICS 71.100.01 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1444:2011 - ISO 6206:1979 | 2011 | Chemical products for industrial use-sampling-vocabulary Defines in English the terms most frequently used in relation to sampling of chemical products for industrial use. These terms have been grouped according to the classification; general term ICS 71.100.01 |
7 | Tshs 15,000/=, USD 15 |
| TZS 1443: 2011- ISO8213:1986 | 2011 | Chemical Products for Industrial Use-Sampling Techniques-Solid chemical products in the form of particles varying from powders to coarse lumps Describes the general techniques of taking and preparing samples with a view to the assessment of a solid chemical product lot, for use in conjunction with a previously established sampling ICS 71.100.01 |
31 | Tshs 40,000/= USD 40 |
| TZS 1442 (Part 1):2017 (2nd Ed) | 2017 | Soil shear test Part 1 - Direct shear stress Specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations ICS 13.080.20 |
15 | Tshs. 20,000/= USD 20 |
| TZS 1441: 2017(2nd Ed)- ISO 8970: 2010 | 2017 | Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density Specifies a method, based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of connections made with mechanical fasteners ICS 91.080.20 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1440-1: 2017 (2nd Ed)-ISO 22389-1: 2010 | 2017 | Timber structures — Bending strength of I-beams - Part 1: Testing, evaluation and characterization Specifies the requirements for prefabricated wood-based I-beams used as structural members in bending applications ICS 91.080.20 |
28 | Tshs 35,000/= USD 35 |
| TZS 1439-2: 2017(2nd Ed)- ISO10984-2: 2009 | 2017 | Timber structures — Dowel-type fasteners Part 2: Determination of embedding strength Specifies laboratory methods for determining the embedding strength of solid timber, glued laminated timber and wood-based sheet products with dowel-type fasteners ICS 91.080.20 |
17 | Tshs 25,000/= USD 25 |
| TZS 1439-1:2017 (2nd Ed)- ISO10984-1:2009 | 2017 | Timber structures — Dowel-type fasteners Part 1: Determination of yield moment Specifies a laboratory method for determining the yield moment of dowel-type fasteners ICS 91.080.20 |
17 | Tshs 25,000/= USD 25 |
| TZS1438:2011 (1st Ed) -ISO10983:1999 | 2011 | Timber structures — Solid timber finger - jointing — Production requirements Specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members ICS 91.080.20 |
19 | Tshs 25,000/= USD 25 |
| TZS 1437: 2017 (2nd Ed) | 2017 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics General principles for the determination of the strength and deformation (slip) characteristics of joints made with mechanical fasteners ICS 91.080.20 |
6 | Tshs. 15,000/= USD 15 |
| TZS1436 (Part 2): 2011 (1st Ed) | 2011 | Gypsum binders and gypsum plasters – Part 2: Test methods Describes the reference test methods for all gypsum binders and gypsum plasters covered by TZS 1436-1 ICS. 91.100.10 |
20 | Tshs 25,000/= USD 25 |
| TZS 1436-1: 2011 (1st Ed) | 2011 | Gypsum binders and gypsum plasters – Part 1: Definition and requirements Specifies the characteristics and performance of powder products based on gypsum binder for building purposes. This includes premixed gypsum building plasters for plastering of walls and cei ICS 91.100.10 |
15 | Tshs. 20,000/= USD 20 |
| TZS 1435: 2011- ISO 26986: 2010 | 2011 | Resilient floor coverings – Expanded (cushioned) poly (vinyl chloride) floor covering – Specification Specifies the characteristics of floor coverings based on expanded (cushioned) poly (vinyl chloride), supplied as either tiles or rolls ICS 97.150 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1434-4: 2018 - ISO 13007-4:2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 4: Test methods for grouts Describes test methods for determining characteristics for grouts used in the installation of ceramic tiles. The test methods described are the following; determination of flexural and compr ICS 91.100.23 |
21 | Tshs. 30,000/= USD 30 |
| TZS 1434-3: 2018 -ISO 13007-3: 2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 3: Terms, definitions and specifications for grouts Defines terms concerning the product, working methods and application properties for ceramic tile grouts. It specifies values of performance requirements for all ceramic tile grouts [cementi ICS 91.100.23 |
7 | Tshs. 15,000/= USD 15 |
| TZS 1434-2: 2018- ISO 13007-2: 2010 | 2018 | Ceramic tiles – Grouts and adhesives – Part 2: Test methods for adhesives Describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are the following: a) determination of open time; b ICS: 91.100.23 |
35 | Tshs 40,000/= USD 40 |
| TZS 1434-1:2018- ISO 13007-1: 2010 | 2018 | Ceramic tiles — Grouts and adhesives – Part 1: Terms, definitions and specifications for adhesives Defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [ ICS 91.100.23 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1433: 2021 (2nd Ed)/EAS 919:2019 | 2021 | Pilau masala – Specification Specifies the requirements, sampling and test methods for pilau masala. ICS 67.220.10 |
4 | Tshs. 10,000/= USD 10 |
| TZS 1432: 2017 (1st Ed) | 2017 | Refined olive oil and refined olive pomace oil – Specification Prescribes the requirements and methods of sampling and test for refined olive oil and refined olive pomace oil intended for direct human consumption ICS 67.200 |
8 | Tshs. 15,000/= USD 15 |
| TZS1431: 2017 (2nd Ed) | 2017 | Refined edible rapeseed (canola) oil – Specification Prescribes requirements, methods of sampling and test for refined edible rapeseed (canola) oil ICS 67.220 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2119: 2018- EAS 64: 2017 | 2018 | Groundnut (peanut) oil for cosmetic industry — Specification specifies the requirements, sampling and test methods for groundnut (peanut) oil for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2116: 2018 - ISO 14930: 2012 | 2018 | Leather — Leather for dress gloves — Specification Specifies the requirements, sampling and methods of testing for chrome and chrome-alum tanned leather used for the manufacture of dress gloves. This International Standard does not apply t ICS: 59.140.30, |
3 | TSHS 10,000/= USD 10 |
| TZS 2115-3: 2018 - ISO 28499-3: 2009 | 2018 | Buffalo hides and buffalo calf skins — Part 3: Grading on the basis of defects Provides guidance on the classification of raw or cured, trimmed buffalo hides and buffalo calf skins, intended for tanning, on the basis of visually apparent defects. It applies to water-bu ICS: 59.140.20 |
3 | TSHS 10,000/= USD 10 |
| TZS 2115-2: 2018 - ISO 28499-2: 2009 | 2018 | Buffalo hides and buffalo calf skins — Part 2: Grading on the basis of mass and size provides guidance on the classification of raw, wet-salted, dry-salted and dried buffalo hides and buffalo calf skins intended for tanning. It applies to water-buffalo hides and water-buffal ICS: 59.140.20, |
4 | TSHS 10,000/= USD 10 |
| TZS 2115-1: 2018 - ISO 28499-1: 2009, | 2018 | Buffalo hides and buffalo calf skins — Part 1: Description of defects intended for tanning. It applies to water-buffalo hides and water-buffalo calf skins and not to those of wild buffalo and American bison (Bison bison). ICS: 59.140.20, |
4 | TSHS 10,000/= USD 10 |
| TZS 2114: 2018 - ISO 11398: 2012 | 2018 | Leather — Raw ostrich skins — Descriptions of defects, guidelines for presentation and grading on the basis of defects Descriptions of defects in raw ostrich skins and guidelines for the Presentation and grading of ostrich skins based on these defects ICS: 59.140.20 |
6 | TSHS 15,000/= USD 15 |
| TZS 2113: 2018 - ISO 11396: 2012 | 2018 | Crocodile skins — Presentation, description of defects, grading on the basis of defects, size (length) and origin. Describes the presentation of crocodile skins and defects which may occur. It provides guidelines for grading crocodile skins on the basis of defects, size (length) and origin. ICS: 59.140.20, |
5 | TSHS 10,000/= USD 10 |
| TZS 2112-3: 2018 - ISO 7482-3:2005 | 2018 | Raw goat skins — Part 3: Guidelines for grading on the basis of defects. Prescribes guidelines for the classification of raw or cured, trimmed goat skins on the basis of visually apparent defects. ICS: 59.140.20, |
13 | TSHS 20,000/= USD 20 |
| TZS 2112-2: 2018 - ISO 7482-2: 1999 | 2018 | Raw goat skins — Part 2: Guidelines for grading on the basis of mass and size Prescribes guidelines for grading raw goat skins in the fresh and the cured (including sundried) condition on the basis of their mass and size. ICS: 59.140.20, |
3 | TSHS 10,000/= USD 10 |
| TZS 2084: 2017 | 2017 | Modified safari vehicles — Code of practice for safari vehicles modification Gives guidelines for modified motor vehicles that are used in wildlife hunting and transportation of tourist within Tanzania national parks and other tourist attractions. ICS: 43.040.60 |
16 | TSHS 25,000/= USD 25 |
| TZS 2096-2: 2017- ISO 17892-2: 2014 | 2017 | Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density Specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. ICS: 93.020, |
14 | TSHS 20,000/= USD 20 |
| TZS 2098-2: 2017- ISO 22476-2: 2005 | 2017 | Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing Specifies requirements for indirect investigations of soil by dynamic probing within the scope of the geotechnical investigations according to prEN 1997. ICS: 93.020 |
30 | TSHS 35,000/= USD 35 |
| TZS 2099-3: 2017- ISO 22476-3: 2005 | 2017 | Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test Specifies requirements for indirect investigations of soil by standard penetration tests within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2 to complimen ICS: 93.020 |
14 | TSHS 20,000/= USD 20 |
| TZS 2088: 2018- ISO 562: 2010 | 2018 | Hard coal and coke — Determination of volatile matter Specifies a method of determining the volatile matter of hard coal and of coke. It is not applicable to brown coals and lignites. ICS: 73.040 |
8 | TSHS 15,000/= USD 15 |
| TZS 2087: 2018- ISO 17247: 2013 | 2018 | Coal — Ultimate analysis Establishes a practice for the ultimate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. ICS: 73.040 |
5 | TSHS 10,000/= USD 10 |
| TZS 2086: 2018- ISO 17246: 2010 | 2018 | Coal — Proximate analysis Establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. ICS: 73.040 |
5 | TSHS 10,000/= USD 10 |
| TZS 2083: 2017 | 2017 | Icing sugar — Specification Prescribes the requirements and the methods of sampling and test for icing sugar. ICS:67.180.10, |
6 | TSHS 15,000/= USD 15 |
| TZS 2081: 2017 | 2017 | Cookies — Specification Prescribes the requirements and sampling and test methods for cookies baked from batter intended for direct human consumption. ICS: 67.060 |
8 | TSHS 15,000/= USD 15 |
| TZS 2080: 2017 | 2017 | Buns — Specification Specifies the requirements, methods of sampling and test for buns intended for direct human consumption. ICS: 67.060 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2079: 2017 | 2017 | Engine coolants — Specification Covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 40 % to 70 ICS: 71.100.45 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2078: 2017 | 2017 | Geological exploration by geophysical method (Seismic refraction) — Code of practice deals with seismic refraction method including the equipment, field procedures, and interpretation of data for assessment of subsurface materials. Seismic refraction measurements, as describ ICS: 93.020 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2077: 2017 | 2017 | Geological exploration by geophysical method (Electrical resistivity) — Code of practice Lays down a summary of the best practice for geological exploration by electrical resistivity method including equipment, field procedures, and interpretation of data for measurement of the ICS: 93.020 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2076: 2017 | 2017 | Subsurface exploration by pits, trenches, drifts and shafts — Code of practice Lays down the method for subsurface exploration by means of pits, trenches, drifts and shafts. ICS: 93.020 |
12 | Tshs. 20,000/= USD 20 |
| TZS 2075: 2017 | 2017 | Classification of terminologies for exploration of mineral deposits Specifies the definitives for classification of terminologies pertaining to resources and reserves of economic mineral deposits subjected to appraisal through mineral exploration and norms o ICS: 93.020 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2074-2: 2017 | 2017 | Glossary of mining terms — Part 2: Boring and exploration Covers the definitions of terms used in mining industry in connection with boring and exploration. ICS: 01.040.73 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2074-1: 2017 | 2017 | Glossary of mining terms — Part 1: Surveying Covers the definition of terms used in mining industry in connection with mine surveying. ICS:59.080.20 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2068: 2017 | 2017 | Receiving waters — Specification Specifies the requirements, sampling and methods of test for receiving waters ICS:13.060.01, |
6 | Tshs. 15,000/= USD 15 |
| TZS 2067: 2017 | 2017 | Water for irrigation — Specification Specifies the requirements, sampling and methods of test of water for irrigation purposes. ICS: 13.060.01, |
5 | TZS 10,000/-USD 10 |
| TZS 2066: 2017 | 2017 | Water for aquaculture — Specification Specifies the requirements, sampling and methods of test of water for aquaculture purposes. ICS: 13.060.01, |
4 | TZS 10,000/-USD 10 |
| TZS 2065: 2017 | 2017 | Water for construction — Specification Specifies the requirements, sampling and methods of test of water that is used for construction purposes. ICS: 13.060.01 |
2 | TZS 10,000/-USD 10 |
| TZS 2064: 2021/ EAS 941:2020 | 2021 | Flavoured drinking water — Specification Specifies requirements, methods of sampling and test methods for flavoured drinking water. ICS: 13.060.20 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2063: 2018 | 2018 | Dried tropical fruits — Specification prescribes requirements and methods of sampling and tests for dried tropical fruits of Carica spp. (papaya), Ananas spp. (pineapple) and Artocarpus spp. (jackfruit) which have been suitably ICS: 67.080, |
11 | Tshs. 20,000/= USD 20 |
| TZS 2060: 2018- EAS 66-3: 2017 | 2017 | Tomato products — Specification — Part 3: Tomato juice Specifies requirements, sampling and test methods for unfermented but fermentable juice, intended for direct consumption, obtained from fresh tomatoes (Lycopersicum esculentum L.), puree, pa ICS: 67.080.20 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2059: 2018- EAS 66-1: 2017 | 2017 | Tomato products — Specification — Part 1: Canned (preserved) tomato Specifies the requirements, samplingand test methods for canned (preserved) tomatoes. ICS: 67.080.20, |
7 | Tshs. 15,000/= USD 15 |
| TZS 2058: 2018- EAS 894: 2017 | 2018 | Fresh onions — Specification Specifies the requirements, sampling and tests methods for fresh bulb onions Allium cepa (L.) of the family Alliaceae to be supplied to the consumer. This standard does not apply to onions f ICS: 67.080.10, |
6 | Tshs. 15,000/= USD 15 |
| TZS 2056: 2017 ISO 16297: 2013 | 2017 | Milk — Bacterial count — Protocol for the evaluation of alternative methods Gives guidelines for the evaluation of instrumental alternative methods for total bacterial count in raw milk from animals of different species. NOTE The document is considered complementary ICS: 67.100 |
13 | Tshs. 20,000/= USD 20 |
| TZS 2055: 2017 ISO 17758: 2014 | 2017 | Instant dried milk — Determination of the dispersibility and wettability Specifies a method for the determination of the dispersibility in water of instant dried milk. The method is applicable to instant dried skimmed milk manufactured by either the “straight-thr ICS: 67.100 |
10 | Tshs. 15,000/= USD 15 |
| TZS 2053: 2017 ISO 19344: 2015 | 2017 | Milk and milk products — Starter cultures, probiotics and fermented products — Quantification of lactic acid bacteria by flow cytometry Specifies a standardized method for the quantification of active and/or total lactic acid bacteria and probiotic strains in starter cultures used in dairy products by means of flow cytometry ICS: 67.100 |
25 | Tshs. 30,000/= USD 30 |
| TZS 2052: 2017 ISO 27105: 2016 | 2017 | Milk and cheese — Determination of hen’s egg white lysozyme content by high performance liquid chromatography Specifies a method for the quantitative determination of hen’s egg white lysozyme content in milk and cheese. The method is suitable for measuring low levels of hen’s egg white lysozyme with ICS: 67.100 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2051: 2017 ISO 8968-4: 2016 | 2017 | Milk and milk products — Determination of nitrogen content — Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) Specifies a method for the direct and indirect determination of the protein nitrogen content of liquid, whole or skimmed milk. ICS: 67.100.10 |
11 | Tshs. 20,000/= USD 20 |
| TZS 2050: 2017 ISO 11816-2: 2016 | 2017 | Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese Specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in cheese. This method is applicable to soft cheeses, semi-hard and hard cheeses prov ICS: 67.100.30 |
15 | Tshs. 20,000/= USD 20 |
| TZS 2049: 2020/EAS 974:2019 | 2020 | Compounded dairy goat feeds — Specification Specifies supplementary feeding requirements, methods of sampling and test for compounded dairy goat feeds. ICS: 65.120, |
12 | Tshs. 20,000/= USD 20 |
| TZS 2048: 2020/EAS 973: 2019 | 2020 | Compounded fish feeds — Specification Specifies requirements, method of sampling and test for compounded fish feeds used in aquaculture. It applies to tilapia and catfish feeds. ICS: 65.120 |
14 | Tshs. 20,000/= USD 20 |
| TZS 2047: 2017 | 2017 | Poultry feed premixes — Specification Specifies requirements, methods of sampling and test for poultry feed premixes used as a sole source of vitamins and trace elements for poultry. ICS: 65.120 |
5 | TZS 10,000/-USD 10 |
| TZS 2046: 2017 | 2017 | Pig feed premixes — Specification Specifies requirements, methods of sampling and test for pig feed premixes used as animal feeds. ICS: 65.120, |
5 | TZS 10,000/-USD 10 |
| TZS 2045: 2017 | 2017 | Dairy cattle premix — Specification Specifies requirements, methods of sampling and test for cattle feed premixes used in enrich cattle feeds. ICS: 65.120, |
4 | TZS 10,000/-USD 10 |
| TZS 2044: 2017 ISO 5985: 2002 | 2017 | Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid Specifies two procedures for animal feeding stuffs for the determination of the ash which is insoluble in hydrochloric acid. The applicable procedure depends on the nature of the sample. a) ICS: 67.100 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2043-7: 2017- ISO 13061-7: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain Specifies a method for the determination of ultimate tensile stress of wood perpendicular to grain of small clear specimens in the radial and tangential directions by measuring the breaking ICS: 79.040, |
5 | TZS 10,000/-USD 10 |
| TZS 2043-6: 2017- ISO 13061-6: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain Specifies a method for determining the ultimate tensile stress of wood parallel to grain on small clear specimens by measuring the breaking load applied statically along the longitudinal axi ICS: 79.040 |
5 | TZS 10,000/-USD 10 |
| TZS 2043-2: 2017- ISO 13061-2: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests Specifies a method for determining the density of wood for physical and mechanical tests on small clear wood specimens. It may also be used to determine density of test specimens for other p ICS: 79.040, |
5 | TZS 10,000/-USD 10 |
| TZS 2043-1: 2017- ISO 13061-1: 2014 | 2017 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests Specifies oven-drying methods for determining the moisture content of wood for physical and mechanical tests on small clear wood specimens. ICS: 79.040, |
4 | TZS 10,000/-USD 10 |
| TZS 2033: 2018 EAS 62-1: 2017 | 2018 | Fish handling and processing — Code of practice — Part 1: Fresh fish Provides guidelines for the handling and processing of fresh fish intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
| TZS 2032: 2018 EAS 899: 2017 | 2018 | Tuna canned in oil — Specification Specifies requirements, sampling and test methods for tuna canned in oil intended for human consumption. ICS: 67.120.30 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2031: 2018 EAS 898: 2017 | 2018 | Processing and handling of smoked fish, smoke-flavoured fish, smoke–dried fish and smoked fish products — Code of practice Provides guidelines for processing, handling and storing of smoked fish, smoke-flavoured fish, smoke-dried fish and smoked fish products intended for human consumption. This code of practice ICS: 67.120.30 |
4 | TZS 10,000/-USD 10 |
| TZS 2030: 2018 EAS 897: 2017 | 2018 | Frozen lobster tails — Specification Specifies requirements, sampling and test methods for frozen lobster tails of all the species of the genera Panulirus, Thunnus and Peurulus intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2029: 2018 EAS 896: 2017 | 2018 | Fried fish — Specification Specifies requirements, sampling and test methods for fried fish of all species, which may be whole or portions intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
| TZS 2028: 2018 EAS 895: 2017 | 2018 | Fish protein concentrate — Specification Specifies requirements, sampling and test methods for fish protein concentrate intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2027: 2018 EAS 876: 2017 | 2018 | Smoked fish, smoke-flavoured and smoke-dried fish — Specification Specifies requirements, sampling and test methods for smoked fish, smoke flavoured fish and smoke dried fish intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2026: 2018 EAS 875: 2017 | 2018 | Quick frozen prawns or shrimps Specification Specifies requirements, sampling and test methods for quick frozen prawns or shrimps. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2025: 2018 EAS 874: 2017 | 2018 | Processing and handling of prawns or shrimps — Code of practice Prescribes guidelines for processing and handling of prawns or shrimps intended for human consumption. ICS: 67.120.30 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2024: 2018 - EAS 873: 2017 | 2018 | Frozen tuna loins — Specification Specifies requirements, sampling and test methods for frozen tuna loins intended for human consumption. ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2023: 2018 EAS 872: 2017 | 2018 | Frozen octopus — Specification Specifies requirements, sampling and test methods for frozen octopus intended for human consumption. ICS: 67.120.30 |
5 | TZS 10,000/-USD 10 |
| TZS 2022: 2018 EAS 871: 2017 | 2018 | Fish sausages — Specification Specifies requirements, sampling and test methods for fish sausages intended for human consumption. ICS: 67.120.30 |
7 | Tshs. 15,000/= USD 15 |
| TZS 2021: 2018 - EAS 870: 2017 | 2018 | Crackers from marine and fresh water fish, crustacean and molluscan shellfish — Specification Specifies requirements, sampling and test for crackers prepared from marine and freshwater fish, crustacean and molluscan shellfish ICS: 67.120.30 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2020-1-1: 2017 IEC 62680-1-1: 2015 | 2017 | Universal serial bus interfaces for data and power — Part 1-1: Common components — USB Battery Charging Specification, Revision 1.2 The battery charging working group is chartered with creating specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in ex ICS: 29.220; 33.120; 35.200 |
63 | |
| TZS 2019-1-102: 2017 IEC 61196-1-102: 2005 | 2017 | Coaxial communication cables — Part 1-102: Electrical test methods — Test for insulation resistance of cable dielectric Applies to coaxial communication cables. It specifies test methods for determining the insulation resistance of coaxial cables ICS: 33.120.10 |
5 | |
| TZS 2019-1-100: 2017 IEC 61196-1-100: 2015 | 2017 | Coaxial communication cables — Part 1-100: Electrical test methods — General requirements Gives the general requirements and condition for electrical tests to be performed on coaxial communication cabkes ICS: 33.120.10 |
9 | |
| TZS 2019-1-101: 2017 IEC 61196-1-101: 2005 | 2017 | Coaxial communication cables — Part 1-101: Electrical test methods — Test for conductor d.c resistance of cable Applies to coaxial communication cables. It specifies test methods for determining the conductor d. c resistance of coaxial cables. ICS: 33.120.10 |
60 | |
| TZS 2262:2018 | 2018 | Glass cleaner, liquid- Specification Prescribes the requirements, methods of sampling and test for glass cleaner, liquid. This Tanzania Standard is applicable for the glass cleaner liquid intended primarily for use on wind shi ICS:71.100.40 |
8 | Tshs. 15,000/= USD 15 |
| TZS 2288: 2018- EAS 321: 2018 | 2018 | Edible fats and oils – Specification Specifies the requirements, sampling and tests methods for edible fats and oils intended for human consumption ICS: 67.200.10 |
4 | TZS 10,000/-USD 10 |
| TZS 2287: 2018- ISO 21103: 2014 | 2018 | Adventure tourism — Information for participants Specifies minimum requirements for information to be provided to participants before, during and after adventure tourism activities. ICS: 03.200 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2289:2018-EAS 879:2018 | 2018 | Aluminium cans for beverages ― Specification Specifies requirements and test methods for aluminium cans used as primary pack for packaging of beverages. ICS 55.120 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2290:2018-EAS 880:2018 | 2018 | Waxed paper for packaging of confectionery ― Specification Specifies the requirements and test methods for waxed paper for packaging of confectionery. ICS 55.120 |
22 | Tshs. 30,000/= USD 30 |
| TZS 2291:2018-EAS 881:2018 | 2018 | Packaging ― Flexible tubes ― Determination of the air tightness of closures ― Test method Specifies a test method for air tightness of the closures for flexible tubes. It is applicable to flexible single-layer metal or plastics tubes, and multilayer or laminated tubes, used for ICS 55.120 |
3 | TZS 10,000/-USD 10 |
| TZS 2292:2018-EAS 882:2018 | 2018 | Packaging ― Flexible carrier bags ― Specification Specifies requirements, sampling and test methods for flexible carrier bags made of paper and any other flexible material. This standard does not apply to carrier bags made from thermoplas ICS 55.120, |
11 | Tshs. 20,000/= USD 20 |
| TZS 2293:2018-EAS 884:2018 | 2018 | Packaging ― Flexible tubes ― Determination of puncture resistance ― Test method Specifies a test method for determining the puncture resistance of flexible packaging materials. ICS 55.120 |
5 | TZS 10,000/-USD 10 |
| TZS 2294:2018-EAS 886:2018 | 2018 | Packaging ― Flexible packaging material ― Determination of residual solvents by headspace gas chromatography ― Test method Prescribes a method for the quantitative determination of residual solvents in flexible packaging materials by headspace gas chromatography ICS 55.120 |
6 | Tshs. 15,000/= USD 15 |
| TZS 2295:2018-EAS 891:2018 | 2018 | Plastic crates ― Specification Specifies the requirements and test methods for rigid plastic crates for holding and transportation of beverages, fruits, vegetables, bread and milk among others. ICS 55.120 |
5 | TZS 10,000/-USD 10 |
| TZS 2132: 2018- EAS 863: 2017 | 2018 | Paper and board — Cut-size for general purpose — Specification Specifies the requirements, sampling and test methods for cut-size paper and board for general use. ICS: 85.080.01 |
4 | TSHS 10,000/= USD 10 |
| TZS 2131: 2018- EAS 862: 2017 | 2018 | Facial tissue paper — Specification Specifies the requirements, sampling and test methods for facial tissue paper in sheet form for facial hygiene ICS: 85.080.20, |
7 | TSHS 15,000/= USD 15 |
| TZS 2130: 2018- EAS 859: 2017 | 2018 | Paper bags — Specification Specifies requirements, sampling and test methods for gusseted paper bags that have rectangular bottoms and are intended primarily for packaging and/or carrying items. ICS: 85.080.01, |
5 | TSHS 10,000/= USD 10 |
| TZS 2129: 2018- EAS 858: 2017 | 2018 | Base paper for carbon paper — Specification Specifies requirements, sampling and test methods for base paper for carbon paper with their respective grades ICS: 85.080.01 |
5 | TSHS 10,000/= USD 10 |
| TZS 2128: 2018- EAS 857: 2017 | 2018 | Carbon paper — Specification Specifies requirements, sampling and test methods for carbon paper. It covers carbon paper for typewriting and handwriting with their respective grades. ICS: 85.080.01, |
11 | TSHS 20,000/= USD 20 |
| TZS 2127-28: 2018- EAS 847-28: 2017 | 2018 | Cosmetics — Analytical methods — Part 28: Determination of free caustic alkali Prescribes the procedure for the determination of free caustic alkali in cosmetics. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
| TZS 2127-27: 2018 EAS 847-27: 2017 | 2018 | Cosmetics — Analytical methods — Part 27: Determination of total fatty substance by gravimetric method Prescribes the procedure for the gravimetric determination of total fatty substance for cosmetics and oils in the cosmetic industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-26: 2018 EAS 847-26: 2017 | 2018 | Cosmetics — Analytical methods — Part 26: Determination of boric acid Prescribes the procedure for the determination of boric acid in powders ICS: 71.100.70 |
1 | TSHS 10,000/= USD 10 |
| TZS 2127-25: 2018- EAS 847-25: 2017 | 2018 | Cosmetics — Analytical methods — Part 25: Determination of fineness Prescribes the procedure for the determination of fineness in powders. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-24: 2018- EAS 847-24: 2017 | 2018 | Cosmetics — Analytical methods — Part 24: Determination of matter insoluble in boiling water Prescribes the procedure for the determination of matter insoluble in boiling water in powders. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-23: 2018- EAS 847-23: 2017 | 2018 | Cosmetics — Analytical methods — Part 23: Test for absence of grit in powders Prescribes the procedure for the determination of absence of grit in powders. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
| TZS 2127-22: 2018 EAS 847-22: 2017 | 2018 | Cosmetics — Analytical methods — Part 22: Determination of sulphur and sulphides in oils Prescribes the procedure for the determination of sulphur and sulphides in oils. ICS: 71.100.70, |
1 | TSHS 10,000/= USD 10 |
| TZS 2127-21: 2018- EAS 847-21: 2017 | 2018 | Cosmetics — Analytical methods — Part 21: Determination of free acid in oils Prescribes the procedure for the determination of free acid in cosmetics and oils for cosmetic industry. ICS: 71.100.70 |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-18: 2018-EAS 847-18: 2017 | 2018 | Cosmetics — Analytical methods — Part 18: Determination of thermal stability Cosmetics — Analytical methods — Part 18: Determination of thermal CS: 71.100.70 |
1 | TSHS 10,000/= USD 10 |
| TZS 2127-17: 2018- EAS 847-17: 2017 | 2018 | Cosmetics — Analytical methods — Part 17: Determination of pH Prescribes the procedures for the determination of pH in cosmetics and oils for cosmetics industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-16: 2018- EAS 847-16: 2017 | 2018 | Cosmetics — Analytical methods — Part 16: Determination of lead, mercury and arsenic content Prescribes methods for the determination of lead, mercury and arsenic content in cosmetics and oils for cosmetic industry ICS: 71.100.70, |
10 | TSHS 15,000/= USD 15 |
| TZS 2127-15: 2018- EAS 847-15: 2017 | 2018 | Cosmetics — Analytical methods — Part 15: Determination of ash content Prescribes the test method for the determination of ash content in cosmetics and oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-14: 2018- EAS 847-14: 2017 | 2018 | Cosmetics — Analytical methods — Part 14: Determination of Polenske value Prescribes the test method for the determination of Polenske value ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
| TZS 2127-13: 2018- EAS 847-13: 2017 | 2018 | Cosmetics — Analytical methods — Part 13: Determination of rancidity Prescribes the test method for the determination of rancidity ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-12: 2018- EAS 847-12: 2017 | 2018 | Cosmetics — Analytical methods — Part 12: Determination of flash point by Pensky-Martens closed cap tester Prescribes the test method for the determination of flash point by Pensky-Martens closed cap tester in oils for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-11: 2018- EAS 847-11: 2017 | 2018 | Cosmetics — Analytical methods — Part 11: Determination of allyl isothiocyanate Prescribes the test method for the determination of allyl isothiocyanate in oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-10: 2018- EAS 847-10: 2017 | 2018 | Cosmetics — Analytical methods — Part 10: Determination of acetyl value and hydroxyl value Prescribes the test methods for the determination of acetyl value and hydroxyl value in oils for cosmetic industry ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
| TZS 2127-9: 2018- EAS 847-9: 2017 | 2018 | Cosmetics — Analytical methods — Part 9: Determination of colour Prescribes the test method for the determination of colour in oils for cosmetic industry. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-8: 2018- EAS 847-8: 2017 | 2018 | Cosmetics — Analytical methods — Part 8: Titre test Prescribes the test method for the determination of the solidification (titre) point of fatty acids for oils in the cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-7: 2018- EAS 847-7: 2017 | 2018 | Cosmetics — Analytical methods — Part 7: Determination of specific gravity Prescribes the test methods for the determination of specific gravity in oils for cosmetic industry. ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
| TZS 2127-6: 2018- EAS 847-6: 2017 | 2018 | Cosmetics — Analytical methods — Part 6: Determination of melting point. Prescribes the test methods for the determination of melting point of oils in the cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-5: 2018- EAS 847-5: 2017 | 2018 | Cosmetics — Analytical methods — Part 5: Determination of unsaponifiable matter Prescribes the test method for the determination of unsaponifiable matter. ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-4: 2018- EAS 847-4: 2017 | 2018 | Cosmetics — Analytical methods — Part 4: Determination of acid value and free fatty acids Prescribes the test method for the determination of acid value and free fatty acids in oils for cosmetic industry ICS: 71.100.70, |
3 | TSHS 10,000/= USD 10 |
| TZS 2127-3: 2018- EAS 847-3: 2017 | 2018 | Cosmetics — Analytical methods — Part 3: Determination of insoluble impurities Prescribes the test method for the determination of insoluble impurities in oils for cosmetic industry ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2127-2: 2018- EAS 847-2: 2017 | 2018 | Cosmetics — Analytical methods — Part 2: Determination of moisture content and volatile matter content Prescribes the test methods for the determination of moisture content and volatile matter content in oils for cosmetic industry. ICS: 71.100.70, |
9 | TSHS 15,000/= USD 15 |
| TZS 2127-1: 2018- EAS 847-1: 2017 | 2018 | Cosmetics — Analytical methods — Part 1: Glossary of terms Defines terms used in the test methods for oils for cosmetic industry. This standard does not deal with the specifications of the oils or fats. ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 2126: 2018- EAS 846: 2017 | 2018 | Glossary of terms relating to the cosmetic industry Defines the terms relating to the cosmetic industry. ICS: 71.100.70, |
10 | TSHS 15,000/= USD 15 |
| TZS 2125: 2018- EAS 844: 2017 | 2018 | Aryl di-amine-based liquid oxidation hair dyes — Specification Specifies requirements, sampling and test methods for permanent liquid oxidation hair dyes which are aryl di-amine based. This standard does not apply to powder hair dyes, plant-based hair d ICS: 71.100.70 |
10 | TSHS 15,000/= USD 15 |
| TZS 2124: 2018- EAS 840: 2017 | 2018 | Shaving cream — Specification specifies the requirements, sampling and test methods for shaving creams. This standard covers two types of shaving cream: • Type 1; and • Type 2. ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
| TZS 2123: 2018- EAS 837: 2017 | 2018 | Avocado oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for avocado oil for use as a raw material in the cosmetic industry. This standard does not apply to packaged avocado oil, ready for use ICS: 71.100.70, |
5 | TSHS 10,000/= USD 10 |
| TZS 2122-1: 2018- EAS 835-1: 2017 | 2018 | Bath preparations — Part 1: Synthetic detergent-based foam baths and shower gels — Specification Specifies the requirements, sampling and test methods for synthetic foam baths and shower gels. ICS: 71.100.70 |
5 | TSHS 10,000/= USD 10 |
| TZS 2121: 2018- EAS 86: 2017 | 2018 | Sesame (simsim) oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for sesame oil for cosmetic industry. ICS: 71.100.70, |
4 | TSHS 10,000/= USD 10 |
| TZS 2120: 2018- EAS 65: 2017 | 2018 | Coconut oil for cosmetic industry — Specification Specifies the requirements, sampling and test methods for coconut oil for cosmetic industry. ICS: 71.100.70, |
4 | TSHS 10,000/= USD 10 |
| TZS 2127-13: 2018- EAS 847-13: 2017 | 2018 | Cosmetics — Analytical methods — Part 13: Determination of rancidity Prescribes the test method for the determination of rancidity ICS: 71.100.70, |
2 | TSHS 10,000/= USD 10 |
| TZS 1429: 2012 | 2012 | Paratha (chapatti) dough – Specification Prescribes essential requirements for uncooked Paratha dough intended for making flat unleavened product. The standard applies to kneaded flattened pliable flour discs, prepared from wheat f ICS: 67.060 |
6 | Tshs. 15,000/= USD 15 |
| TZS 1428:2011 (1st Ed) | 2011 | Setting lotion – Specification Specifies the requirements, methods of sampling and test for setting lotions ICS 71.100.70 |
10 | Tshs. 15,000/= USD 15 |
| TZS 1427:2011 | 2011 | Lanolin, anhydrous for cosmetics industry Prescribes the requirements and methods of sampling and test for anhydrous lanolin for cosmetic industry ICS: 71.100.70 |
7 | Tshs. 15,000/= USD 15 |
| TZS 1426: 2011 (1st Ed) | 2011 | Edible ices (lollies) – Specification Specifies requirements, methods of sampling and test for edible ices (lollies) ICS 67.100.40 |
7 | Tshs. 15,000/= USD 15 |
| TZS 1425: 2011 (1st Ed) | 2011 | Textile - Sewing Threads Specification - Sewing threads made wholly or partly from synthetic fibres Specifies minimum requirements for industrial and domestic sewing thread containing synthetic material. It deals with industrial and domestic sewing threads made from different substratesand ICS 59.080.20 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1424: 2011 (1st Ed) | 2011 | Textiles - Woven upholstery fabrics -Plain, tufted or flocked –Specifications Covers the performance specification required for Plain woven upholstery fabrics, Tufted, or flocked as used in the manufacture of indoor furniture. The requirements apply to both the warp a ICS 59.080.30 |
7 | Tshs. 15,000/= USD 15 |
| TZS 1423:2020 (2nd Ed) | 2011 | Textiles – Knitted upholstery fabrics for indoor furniture – Specifications Covers the performance specification required for a knitted upholstery fabric, as used in the manufacture of indoor furniture for general domestic use ICS. 59.080 |
8 | Tshs. 15,000/= USD 15 |
| TZS 1422: 2011 | 2011 | Textiles-Woven, non woven, knitted and lace household curtain and drapery fabrics –Specifications Covers a wide range of curtaining and drapery fabric materials produced from natural and synthetic fibres with the exception of steel and glass fibres ICS 59.080 |
11 | Tshs. 20,000/= USD 20 |
| TZS 1421: 2011 (1st Ed) | 2011 | Textile - Specification for cotton denim fabrics Covers performance requirements for a 100% cotton woven denim fabrics, prior to the manufacture of jeans, casual apparel, work clothing and outerwear. It is not applicable to woven denim fab ICS 59.080.30 |
9 | Tshs. 15,000/= USD 15 |
| TZS 1420:2021/ ISO 4915:1991 | 2021 | Textiles — Stitch types — Classification and terminology Classifies, designates, describes, and illustrates the various kinds of stitch types used in hand- and machine-sewn seams. This second edition cancels and replaces the first edition (1981). ICS. 59.080.99 |
48 | Tshs. 55,000/= USD 55 |
| TZS 1419 (Part 2): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions – Part 2: Safety requirements and test methods Specifies safety requirements and test methods for plastic chairs and tables for general educational purposes in educational institutions. It does not apply to computer related and special p ICS 97.140 |
21 | Tshs 30,000/= USD 30 |
| TZS 1419 (Part 1): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions - Part 1: Functional dimensions Specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as ICS 97.140 |
26 | Tshs 35,000/= USD 35 |
| TZS 1418: 2011 (1st Ed) | 2011 | Agricultural equipment – Soil tillage and equipment – Terminology Includes the definitions used in the general classification, design, construction, operation and performance of tillage equipment and soil-tool relationships ICS 65.060.20 |
17 | Tshs 25,000/= USD 25 |
| TZS 1417: 2011 (1st Ed) | 2011 | Agricultural equipment – Walking type agricultural tractors – Specification Specifies the requirements for the construction and operation of walking type agricultural powered machinery for land tilling, weeding, ploughing, grass cutting and transplanting. It covers ICS: 65.060.10 |
13 | Tshs. 20,000/= USD 20 |
| TZS 1416: 2011 (1st Ed) | 2011 | Agricultural equipment – disc plough – Specification Specifies the requirements for disc plough used for four-wheel tractor ICS 65.060.20 |
10 | Tshs 15,000/= USD 15 |
| TZS 2175: 2018- ISO 11723: 2016 | 2018 | Solid mineral fuels — Determination of arsenic and selenium — Eschka’s mixture and hydride generation method Specifies a method using Eschka’s mixture during ashing, extraction of the ash residue with acid, and hydride generation atomic absorption spectrometry or hydride generation atomic fluoresce ICS: 73.040, |
6 | TSHS 15,000/= USD 15 |
| TZS 2174: 2018- ISO 1953: 2015 | 2018 | Hard coal — Size analysis by sieving Specifies reference methods for the size analysis of coal by manual sieving (wet or dry), using test sieves of aperture sizes between 125 mm and 45 μm. A guide to sampling is given in Annex ICS: 73.040, |
13 | TSHS 20,000/= USD 20 |
| TZS 1415: 2011 (1st Ed) | 2011 | Agricultural equipment – Four wheeled tractors – Specifications Specifies the requirements for the construction and operation of agricultural four - wheeled tractor. This is applicable to both two - wheel drive and four-wheel drive tractors with a net po ICS 060.10 |
27 | Tshs 35,000/= USD 35 |
| TZS 1413:2011 | 2011 | Building hardware – Padlocks and padlock fittings requirements and test methods Specifies performance requirements and describes test methods for strength, security, function and corrosion of padlocks and padlock fittings used in building applications, but excluding cab ICS. 91.190 |
23 | Tshs 30,000/= USD 30 |
| TZS 1412: 2011 (1st Ed) | 2011 | Fat spreads and blended fat Spreads –Specification Prescribes the requirements and methods of sampling and tests for fat spreads and blended fat spreads. Fat spreads derived exclusively from milk products and/or milk products to which only o ICS 67.200.10 |
7 | Tshs. 15,000/= USD 15 |
| TZS 1411: 2022 | 2022 | Spring mattress — Specification Specifies requirements, sampling and test methods of spring mattresses for general usage.. ICS: 97.140 |
18 | Tshs. 25,000/= USD 25 |
| TZS 1410: 2011 (1st Ed) | 2011 | Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides – specification Describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods. Gives the information on its use in water treatment ICS 67.200.10 |
11 | Tshs. 20,000/= USD 20 |
| TZS 1409:2011 (1stEd) | 2011 | Polyamines for treatment of water intended for human consumption -Specification Describes the characteristics of polyamines and specifies the requirements and the corresponding test methods. Gives information on its use in water treatment ICS 71.100.80 |
14 | Tshs 20,000/= USD 20 |
| TZS 1408: 2011 (1stEd) | 2011 | Cationic polyacrylamides for treatment of water intended for human consumption – Specification Describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods ICS: 71.100.80 |
11 | Tshs. 20,000/= USD 20 |
| TZS 1402-1: 2018 – ISO 8041-1: 2017 | 2018 | Human response to vibration — measuring instrument — Part 1: General purpose vibration meters Specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requ ICS: 13.160 |
106 | Tshs.110,000/= USD 110 |
| TZS 1401: 2018 – ISO 2041:2009 | 2018 | Mechanical vibration, shock and conditional monitoring — Vocabulary Defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring ICS: 17.160 |
46 | Tshs 55,000/= USD 55 |
| TZS 1400: 2018 – ISO 5349-2: 2001 | 2018 | Mechanical vibration — Measurement and evaluation of human exposure to hand transmitted vibration — Practical guidance for measurement at work place Provides guidelines for the measurement and evaluation of hand-transmitted vibration at the workplace in accordance with ISO 5349-1 ICS: 13.160 |
39 | Tshs 45,000/= USD 45 |
| TZS 1399: 2018 – ISO 5349-1: 2001 | 2018 | Mechanical vibration — Measurementand evaluation of human exposure tohand-transmitted vibration — Generalrequirements Specifies general requirements for measuring and reporting hand transmitted vibrationexposure in three orthogonal axes. It defines a frequency weighting and band-limiting filters to allow un ICS: 13.160 |
24 | Tshs 30,000/= USD 30 |
| TZS 1398-2: 2018 – ISO 2631-2: 2003 | 2018 | Mechanical vibration and shock evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz). Concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants. It specifies a method for measurement and evaluation, compr ICS: 13.160 |
11 | Tshs. 15,000/= USD 15 |
| TZS 2160: 2018 - ISO 14045: 2012 | 2018 | Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidance Describes the principles, requirements and guidelines for eco-efficiency assessment for product systems, ICS: 13.020.10, |
38 | TSHS 45,000/= USD 45 |
| TZS 1398-1: 2018 – ISO 2631-1: 1997 | 2018 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements Defines methods for the measurement of periodic, random and transient whole-body vibration. It indicates the principal factors that combine to determine the degree to which a vibration expos ICS: 13.160 |
31 | Tshs 40,000/= USD 40 |
| TZS 2159: 2018 - ISO 14044: 2006 | 2018 | Environmental management — Life cycle assessment — Requirement and guidelines Specifies requirements and provides guidelines for life cycle assessment. ICS: 13.020.10 |
46 | TSHS 55,000/= USD 55 |
| TZS 1395: 2011 (1st Ed)-ISO 5545: 2008 | 2011 | Rennet caseins and caseinates –Determination of ash Specifies a reference method for the determination of the ash of caseins obtained by rennet precipitation and of caseinates, with the exception of ammonium caseinate ICS 67.100.99 |
9 | Tshs. 15,000/= USD 15 |
| TZS 2173: 2018- ISO 334: 2013 | 2018 | Solid mineral fuels — Determination of total sulfur — Eschka method Specifies a reference method for determining the total sulfur content of hard coal, brown coals and lignites, and coke by the Eschka method. ICS: 73.040 |
7 | TSHS 15,000/= USD 15 |
| TZS 2172: 2018- ISO 11724: 2016 | 2018 | Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash. Specifies a method for the determination of total fluorine in coal, coke and fly ash. ICS: 73.040 |
11 | TSHS 20,000/= USD 20 |
| TZS 1394: 2011 (1st Ed)-ISO 5544: 2008 | 2011 | Caseins -Determination of “fixed ash Specifies a reference method for the determination of the “fixed ash” of caseins, as a percentage by mass, obtained by acid precipitation or lactic fermentation, of ammonium caseinates, of t ICS 67.100.99 |
9 | Tshs. 15,000/= USD 15 |
| TZS 1393: 2011 (1st Ed)- ISO 2450: 2008 | 2011 | Cream – Determination of fat content by Gravimetric method Specifies the reference method for the determination of the fat content of raw, processed and sour cream in which no appreciable separation or breakdown of fat, due to lipolysis, has occurre ICS 67.100.99 |
19 | Tshs 25,000/= USD 25 |
| TZS 2171: 2018- ISO 15237: 2016 | 2018 | Solid mineral fuels — Determination of total mercury content of coal Specifies a procedure for the determination of the total mercury content of coal. ICS: 73.040, |
5 | TSHS 10,000/= USD 10 |
| TZS 2169: 2018- ISO 10008: 2013 | 2018 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |